HP LaserJet Pro M426fdw MFP: HP LaserJet MFP M426fdw - separate drum Pro?
Hello
I am considering buying the HP M426fdw and I work on costs.
If this printer does not have a separate drum that needs to be replaced
or is the drum in the toner cartridge.
I had once a dell color laser printer and finally told
I had to replace the drum which turns out be expensive.
So I don't know if this type of Part applies to this printer.
Thank you
Ward.
I understand that your query is related to the OPC drum Imaging drum which is a part of the cartridge of Toner for HP LJ Pro M426fdw device and not sold separately.
Compatible HP reference for the toner cartrdige number is CF226A or CF226X (High Yield cartridge).
I hope this helps!
Tags: HP Printers
Similar Questions
-
blue color 1518ni Colo laserjet hp gradually separates the characters even grayscale.
I'm getting blurry printing and it seems that blue color shadow gradually separates in the text even when printing in grayscale. Is it an alignment issue curable, bad cartridge or what?
Hello richpoirier,
There are a few things that could be causing that. The toner cartridge is bad is certainly one of them. It could also be that the inside of the printer needs to be cleaned.
Let's start with this troubleshooting article to see if it solves the problem.
-
LaserJet Pro M426fdw MFP: Hp laserjet pro mfp m426 fdw wifi connection
We just got a new printer to my desktop and I'm putting it in place. The wireless network I want does not appear in the list of available networks and it cannot be found by entering the SSID. I realized that it is perhaps because the printer and wireless network are the different encryption types. The printer uses TKIP and the wireless router uses AES. All solutions? Encryption can be changed on printer?
Well, you connect to the web page of routers usually 192.168.1.1. Enter your user name and password. Go to your settings and change the channel to 1 wireless. Never 'auto '. Read the manual of your router for info.
-
Automatic duplex printing works in Word 2016 but no 1 c company. When I choose "Print on both sides" in Word 2016 it works as it should. But in the 1 c company it prints 2 pages instead of 1. Can someone explain why?
The problem is with 1 c Enterprise 8. In version 8.3, it is possible to select two-sided printing in file-> Page Setup. This program doesn't respect changes to the settings of the printer in the print dialog box. You must change the configuration of the default printer in the control panel.
-
Color LaserJet MFP M477fdn Pro: M477 Software Installation fails at 99%
Like others who have posted here, I have been unable to get the printer software to complete the installation. The printer is a Color LaserJet Pro MFP M477fdn, 3 months. I'm trying to install the software on a new workstation HP Z240 performing Windows 10 (64-bit). The connection is via USB cable. The printer and the software have been previously used with a Windows 7 machine without problem.
I tried, repeatedly, to install the software from the disc supplied with the printer and also a 126.6 mb download HP Color LaserJet MFP printer M477 Pro series full software and drivers. The results are the same with a source - installation apparently progresses up to connect it the indicator product of progression from screen reached 99%, how it gives an error message "a Setup operation took too long to run. It is a fatal error, preventing the use of the product. Restart your computer and run this installer again. If the problem persists, please visit the web site of product support for your product. "It takes about 20 minutes for the phase of installation to go from 0 to 99%, and then later hooked up to 99% for 2-5 minutes, the error message is displayed.
I am able to print to this printer, but at least do not have the ability to scan from the computer there is no indication that the I.R.I.S. OCR software is installed.
I had care of do not connect USB until you are educated.
I tried repeating the installation without uninstalling first and get the same result.
I used the uninstall contained the disk feature, and have deleted the printer to the computer using the Panel between the installation attempts.
I tried to do a right click to run the installer as administrator and get the same result.
I tried to install after clean boots with turned off Windows Firewall and all functions of the software Norton Internet Security including its function of firewall turned off.
The event viewer displays none
error entry at all and no entry identifies HP as the source of an event.
I tried to connect via USB 2.0 and 3.0 ports.
I cleaned recycle them and temporary folders.
I have updated the firmware of the printer to the 20160331 version.
Printed printer configuration report will not display any errors, nor that the printer itself indicates something is wrong and confirms the update of the firmware.
I deselected the optional software, the devices experience HP and I.R.I.S. OCR, trying to install only the required files two more program scanning HP.
Thanks for any help solving this.
I think I understood the question, 10 windows installs its own driver, and the installation program expects the hp driver to install.
DO this FOR THE HP INSTALLER PROCESS (when the percentage meter goes)
1. go into the Device Manager and find the printer in the list of devices
2. right click on the printer and select "Update Driver software"
3. click on "Browse my computer for driver software".
4. choose "Let Me pick one...» »
5. Select the named driver: HP Color LaserJet MFP M477 PCL-6 Pro (make sure it's one with a dash between the pcl and 6!)
6. click next and back to the installation of hp box and must now see the printer and continue the installation.
-Alex
-
I get a pcl xl error message when we print our LaserJet Pro 400 Color MFP
When I scan or fax, we get:
PCL XL Error
Subsystem: TEXT
Error: InternalError 0 x 50
File name: cheettext.c
Line number: 710
The printer is a Pro 400 Color MFP LaserJet - m475dw
Windows 7 Professional Service pack 1
What should I do to fix this?
Thanks for the help. I actually did an update of the firmware and it solved the problem.
-
M127fn LaserJet MFP Pro: Hp Laserjet help
https://h30434.www3.HP.com/T5/LaserJet-printing/HP-LaserJet-Pro-MFP-M127fn-beep/m-p/5099750
-
LaserJet pro 177: bought used hp color laserjet pro mfp m177
Installation disk arived broken. How can I do to replace it.
Just upload what you want the site web theHP.
-
I had used my LaserJet MFP Pro wireless without problem for several years, with the Mavericks and Yosemite. A few weeks ago a "update" the printer system is invisible. After several hours of troubleshooting and to try five or six corrections, I finally got the printer online by using the IP address.
My computers, however (a performer of the Mavericks and a Yosemite running), do not see the scanner. It's not a question of adding - they do not to add it. By HP support, I have reset the system print and tried to start over. I downloaded HP Easy Print (or Easy Start or whatever), which is the entire site of support in the way of software for the 277dw of the ACM. The software through me the entire upward and congratulated himself for a job well done, but my printer was not, in fact, related. He appeared in the printers Control Panel, but would not print. Just "connecting to printer" in the queue for ten minutes about until what I called off work. And the scanner does not yet show in the Image Capture, preview or HP Easy Scan.
So, I went back to my previous fix for the printer, use the IP address. Any ideas on how to get the scanner appears?
Hello
Restart your router by unplugging its power for 30 seconds.
Once it is fully up and you have internet access on your Mac reboot both the HP printer and the Mac.
From system preferences, select Printers and scanners and click on the plus sign to add the printer again.
Can you now ee he listed as Hello type or not?
-
HP Color LaserJet Pro M177 MFP: HP Color LaserJet not able to connect to connected HP
Hello
I try to activate my printer (HP Color LaserJet M177fw MFP Pro) ePrint and much more, but I'm not able to do it cause connection problem, I guess.
When I'm trying to 'print the information sheet', for example, the printer is not able to connect (stay on 'Sign in' loop indefinitely).
My printer is less than a Vodafone EasyBox router, with firewall disabled and no specific barriers defined by me.
Should I set some port forwarding (even if they should apply to ignore the firewall, when turned on) or any other specific configuration in the router?
the same connection problem, of course, it happens when I do touch printer and console web administration, of course.
In addition, I'll let you know that my router is not blocking access, for example, to-from the web (i.e. I am able to manage my NAS from the outside, since he admitted to a DDNS) and other local devices
I alreay set 8.8.8.8 and 8.8.4.4 as DNS pri/sec and had an output of cycle after the series of DNS.
My printer also has a static IP address (defined by the DHCP protocol, based on the MAC address), so not a problem, I think.
Thanks in advance for your help,
Lorenzo
Hi Lorenzo,.
To enable Web Services fumctionality, you'll need to install the latest firmware on your printer (version 20160525)
You can locate the current version of your printer by selecting configuration > reports > Page of Configuration, the firmware version is listed under the information section on the printer.
Updated the firmware on Linux by following these steps, but I don't know if the latest firmware is available for Linux or not, try:
http://hplipopensource.com/hplip-Web/tech_docs/man_pages/firmware.html
If the latest firmware is not available for linux, temporarily install the printer on a Windows PC or a my and install the latest firmware:
Kind regards
Shlomi
-
Color LaserJet MFP M177fw Pro: installation of web services blocked to 'connection '.
I'm trying to enable Web Services on this new LaserJet. I am in the built-in Web Server page and the configuration of Web Services tab. I clicked on 'Turn on' and it just keeps spinning in connection...
DNS is 8888 and 8844
All the other tabs work; It is connected to the computer and the Internet. Help please?
Thank you!
Hi @crowndude,
I see that you have problems with Web Services. I want to help you.
I have provided a few steps to try to see if we can solve this problem.
Turn off IPv6 on the printer.
Go to configuration, network configuration, network, IPv6 Services and turn it off.
This DNS works better for Laserjet printers. Please change the settings to see if this will help the printer built-in Web server.
Preferred DNS address: 209.244.0.3
Auxiliary DNS address: 209.244.0.4Power cycle the printer.
If you still have questions, please continue with the following steps:
Update the firmware of the printer by a USB connection. HP Color LaserJet Pro MFP Firmware update M177fw.
Configure a static IP address for the printer. Proceed to Solution 3: printer of the assign a static IP address.
I'll send you another step to try in a private message.
In the forum next to your handle name simply click on the envelope to see.If you appreciate my efforts, please click on the "Thumbs up" button below.
If there is anything else I can help you, let me know. Thank you.
-
MFP HP LaserJet Pro 400 M425dn cold reset
Hello!
Help me! How can I make cold reset HP LaserJet Pro 400 MFP M425dn ?
You can do 'factory reset' menu of the control panel; or permanent initialization of power first, holding and cover the corner area to the right / left of the control panel when you feed on... release your finger when you see «initialization permanent...» ». After you complete and return the loan, it indicates the reset is complete.
-
HP LaserJet MFP M127fw Pro do not print anything other than its own config
Just bought a MFP HP LaserJet Pro M127fw. I can't do print using any kind of connection to the printer.
I can connect to my Ubuntu PC printer and my Android phone, but when I try to print, the job just hangs, never the slightest error, but never finished. I tried printing from various applications, including tools HPLIP, but reports of the use of a test 'treatment' page
When I try to print a fact sheet on the front panel of the printer, it asks me to confirm, but then nothing happens.
I can connect to the web server of the printer, but clicking the print information button it does nothing.
I have connected successfully with ePrint service of HP using the email address declared of the printer, but reports of the service 'problem with printer '.
I don't know what else to try here.Hi richRemer,
I see that you are having problems printing from the computer and the Android phone.
I'll be happy to help you.Cycle power to the router and the computer.
I would do a power reset the printer. When the printer is still lit, disconnect the power cable from the back of the printer. Then, disconnect the power cable from the wall outlet. Wait 10 seconds and reconnect the power cable to the wall outlet first, then the back of the printer and turn on again.
Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector)Print a self test equipment. Find out what is the IP address.
I provided with the driver for Linux OS Support.
If you still have questions please go to the page of Linux support.
Thank you.
-
Scan from HP LaserJet MFP M127fw Pro
Hello
I'm scanning with my MFP HP LaserJet Pro M127fw and when I press 'Apps' he only says: 'connection' and the clock starts to turn and nothing happens. I tried to reinstall the boot with no improvement drive. Can anyone help please?
Thank you.
Hi Marisa,.
You can use this tool to install the latest version of the firmware from a Mac computer:
Please note that the printer must be installed via a USB only connection, make sure to temporarily connect a USB cable in order to update the printer.
Making such a through a wireless connection may fail and may damage the printer and so should not be done.
-
Trying to download the latest drivers (I couldn't scan with Easy Scan more after the release of macOS sierra 10.12) I received the following massage
No software or drivers are available for this product with the selected operating system. Please make a different selection, or visit the product home page.
PS: My OS has been identified correctly in the web page.
Hi @pisca46,
Thank you for joining the HP Forums!
I understand that there is no drivers for your HP Color LaserJet Pro MFP M277dw on Mac OS X 10.12 Sierra. I am pleased to see that for you!
You are right that there are currently no drivers available at this time. In the meantime, I suggest trying the rest of this guide, of install a printer Mac driver by using Apple Software Updateand then try using the Apple Image Capture.
Otherwise, all we can do is wait for the drivers and software provision, or plan to use an older version of Mac OS X.
If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.
I hope this helps!
Maybe you are looking for
-
Is it feasible and practical to pair the two watches from Apple on an iPhone?
I am owner of a steel stainless steel Apple Watch. I wear during workouts which proved to be less satisfactory. The watch is beat up, scratched, dirty, etc.. I thought getting a Apple Watch for "dress" and a cheaper, aluminum, for training and exerci
-
Can I play the shock of clans on Firefox OS?
I was wondering is there a version of the clash of the clans for Firefox OS. I would also like to know browser games online like Travian and Ikariam can be played on Firefox OS?
-
my headphones (or headsets) does more work when plugged into the audio input jack
I have a 2010 27-in. iMAC. I am running Yosemite 10.10.5. Recently I can't get audio on the audio jack that I always used with my helmet. Have tried the other sons of contact as well as the apple earbuds. Audio is great internal speakers.
-
nested loops for speed optimization
Hello. I need help to optimize for speed (in LabVIEW) code (matlab) following: ----------------------------------- a = rand(1024, 200);b = rand(1024, 512);c = Zeros (200,512);ICTfor i = 1: 200j = 1:512c (i, j) = (Sum ((:,i).*b(:,j))) a ABS;endendTabl
-
Switch to Windows Live and Xbox Live Messaging
So, I tried to move from the mails from my Windows Live account before in order to get my Xbox Live account to send emails to the new email address I did check. I created a new account and tried to transfer all about that one as the original sense to