HP LaserJet Pro P1606dn: Fatal error Laserjet p1606dn - hard reset does not help
I powered on my printer this morning and having to "calibrate" - type sounds for about two minutes, the Attention, ready, and go lights on (solid, no blinking). The printer prints everything I have send to it, even test pages. By following the instructions on this page, I did a hard reset by putting off the printer, unplug the power cable, leaving unplugged for about 60 seconds, then in him plugging back in and turning it back on. Same thing: makes noise for a minute or two, then three strong lights.
The printer is on a wired LAN, and I tried printing from two different computers on the network. I tried not to do a direct USB connection yet because this seems irrelevant to the question. The network (10.10.10.x) page shows the status of the printer such as "Printer Error".
FWIW, he showed the same error last week, but a hard reset fixed it on the first try. This time, it does not.
EDIT: If it helps, the date of the firmware is 20120814. I tried to update to 20150114 via the update utility, but he says that he can not find a serial p1600 printer is installed.
EDIT 2: the printer will not even turn on. Tried a few different outlets, power strip directly into the wall vs - nothing. I think he's dead. Based on my experience with HP printers, I'm not surprised.
Hey @dselzle,
Welcome to the HP forums! I hope you enjoy your stay here.
I understand that you are having problems with turn your Laserjet P1606dn. I can help you with that.
To start, you will want to make sure that the printer is plugged directly into a wall outlet , not a surge protector. Once's done it, this document will help you with your power problems.
If you are able to turn on the printer, then that's fine. If it doesn't always turn the printer will need to be repaired. You can contact HP by clicking on this link by clicking on the form below.
If this resolves your problems so please let other users know by clicking on accept as Solution next to this post.
I hope this helps and I hope you have a nice day!
Tags: HP Printers
Similar Questions
-
HP Pro Book 450 G1 turn not away and hard reset does not
Hi all
My new HP Pro Book 450 G1 will not activate to return, and a blinking next to the AC adapter when I press the power button. I tried the method proposed reset elsewhere on this site (e.g., out of battery and other external sources, unplug, hold down the power button for at least 15 seconds, etc.), but it does not work. Another suggests about how to fix this?
Thank you!
-JS
Do not consider this issue. I realized that I was with my other computer power cord... stupid mistake. Thanks to all who helped to think of a solution - I hope I have to not inconvenience you too. My HP now works correctly.
-
Don't know who else can talk me to about it.
Basic cat / customer service does not know how to solve my problem. I get error 205. Support to that solution has been disable the antivirus. That did not work. The next idea was try another internet connection. Does not work either. Of course, all this could be avoided if there was more than one method of download available. Maybe one that installed CC how the rest of the planet is installed.
Despite everything, I need someone who can help me with this. I pay Adobe on a monthly basis after all.
Please see the links below.
- Error download or update Adobe Creative Cloud applications
- Creating cloud App, code error installation 205
- Installation of Creative Cloud-error 205
Hope this will help you.
Kind regards
Hervé Khare
-
I am not able to connect to my facebook account and the error message reads "this website does not provide information on property." Help, please
only title bar opens and nothing else... Please help
Clear the cache and cookies from sites that cause problems.
"Clear the Cache":
- Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.
'Delete Cookies' sites causing problems:
- Tools > Options > privacy > Cookies: "show the Cookies".
Also check the cookie exceptions.
-
Hi all
I use the model Match 4 IMAQ to detect the angle of rotation of an image of model. However, it displays the error: "error 1074395241: the model descriptor does not contain the data required for the corresponding rotation invariant." What exactly is the problem? How to solve this problem? The details are explained below.
My project is a bit complicated. Part of the block diagram containing the IMAQ Match model 4 is illustrated below:
The source image is a series of images of images read from an AVI video (I used a loop for to process the images frame by frame). The image of the model is an area of the first selected image. So, this means, the user selected the ineterst object in the first frame of the video, and each of the following images to find the object corresponding interest & determine its rotation angle. When I run the above diagram, there no error. However, it shows the angle of rotation zero no matter what it is 'really '. Therefore, I changed the schema by adding parameters, listed below:
But in this case, when I run it, it shows the error I mentioned in the subject line.
If you need more information about my project to identify the problem, please let me know.
Thanks in advance.
S ' Please example from model that comes with labview First
Go to labview Help > find examples and you can search for example.
-You create model with angle range and what kind of special criteria you want to use.
-To do this you must use IMAQ learn pattern before using IMAQ model Match 4
Reference:http://zone.ni.com/reference/en-XX/help/370281U-01/imaqvision/imaq_match_pattern_4/ -
My computer stopped working wireless, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services. I've tried everything and my router is intact. My Protection of Kaspersky flags are gone from green to red and says threats have been detected. What should I do to get back on the wireless.
original title: Wireless not working not
Hello
1 have had any changes made on the computer before the show?
2. what operating system is installed on the computer?
Method 1:
Check the link and try to run the troubleshooter to check if it helps.
Windows wireless and wired network connection problems
Method 2:
Try to run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
-
service pack 3 error loading 'a components file does not match the verification information present in the component manifest ".
I have SP2 with all updates, I have this error message after the failed attempt to load service pack 3.
Hi Carl_Focus_Phone,
· Is confined with Update Service Pack 3?
· Did you do changes on the computer before the show?
You can follow the steps in the article in the Microsoft Knowledge Base and check if that helps.
How to troubleshoot an installation fails on Windows XP Service Pack 3
http://support.Microsoft.com/kb/950718
You can also see the following articles for more information:
Steps to take before you install Windows XP Service Pack 3
http://support.Microsoft.com/kb/950717
Learn how to install Windows XP Service Pack 3 (SP3)
http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3
Let us know if that helps.
-
error 1075 the dependency service does not exist or has been marked for removing windows xp
The DHCP Client has stopped, but it is configured to start automatically. When I try to reboot, I get the following message: error 1075 the dependency service does not exist or has been marked for deletion. I need help to solve this problem. Because of this problem, I can not connect to the internet. My connection continues to try to acquire a network address and I lost my IP address. I need help to fix this error on my Windows XP machine. Thank you!
See if this article solves your problem:
"Error message when you start the DHCP Client service on a Windows XP-based computer:"error 1075.
<>http://support.Microsoft.com/kb/915162 >HTH,
JW -
When I bought and installed my Pro Deskjet 8600 in last July, a wonderful control program has been installed. However, the shortcut on the desktop for this program has disappeared, and I can't. Re-run the installation program does not help. How can I get that back. All I have now is an older version of the HP Solution Center, which does not have the features that I got into the habit of.
Hello
Uninstall the software by following programs > HP > HP Officejet Pro 8600 > Uninstall.
Then download and install the latest version of the software below, it is a more recent software and should solve the problem you are experiencing:
Shlomi
-
error 1075 the dependency service does not exist or has been marked for deletion
Im trying to find solutions for this error with windows vista. The only solutions with microsoft in the VISTA section is for xp machines. Go figure. Im trying to reboot the Client DHCP service and this is the error I get. (error 1075 the dependency service does not exist or has been marked for deletion). I tried to fix the registry key to match a working vista machine, but it did not work. This is the registry that I corrected. HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\DHCP
Just delete the registry entry and restart the system. It should work perfectly. It worked for me.
- Click Start, click run, type regedit in the Open box, and then click OK.
- In the registry editor, find and then click the following registry subkey:HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\DHCP
- Right click on the entry DependOnService , and then click remove instead of change
-
There is an error with my computer, it does not connect with my router. It works with my usb 3g modem, but not with my router. My router works with other devices.
I tried to connect my xbox to my computer to xbox live via the 3g router, but I was unable to. According to me, there is something wrong with the network card, since neither the wifi (wlan?) nor the lan connection seem to work.
I harnessed connected my iPod, Xbox 360 and Nintendo DS for her, but not my computer. Please help me, what wrong with my computer?original title: problem with the map?Hi GustavTak,
1. you have made no changes to the computer before the broadcast took place?
2. do you get an error message?Try the steps from the following link:
Windows wireless and wired network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-WindowsAdditional information:
Network connection problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problemsSet up a wireless router
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-wireless-router -
On my laptop Dell Studio 1555 with 32-bit Windows Vista Premium (with SP2), as soon as I connect, I get an error "the application BTTray.exe does not able to initialize correctly. Click OK to terminate the application". Then another pop-up window appears the error information. After awhile, it prompts you to close the program. This happened since I updated the Bluetooth Widcom software from the DELL Web site. I tried to uninstall the software and put it back in place for the DVD that comes with the laptop. But that did not help.
Yesterday, when I tried to connect to the remote Citrix server, so I was able to work remotely, I got the same error for the software Citrix, "the application failed to initialize properly wfcrun32.exe. Click OK to complete the program." Then another pop-up window appears the error information. After awhile, it prompts you to close the program.
My colleague, who also has a laptop with Vista home is able to connect to Citrix without any error. He said he did a lot of configuration changes in the security features in vista.
Is could someone please help me get rid of these annoying errors?I came across a similar story, while answering a different question, earlier today. It seems to involve Dell machines and a corrupt file of the MFC80.dll. If it's useful to you or not, I'm not sure, in any case, you would like to read this link.
2.0 secure Local data RMCPlg.exe and BTTray.exe errors
http://support.Dell.com/support/topics/global.aspx/support/DSN/en/document?c=us&DL=false&l=en&s=Gen&docid=6CF68D431EAAB41BE040AE0AB6E16686&doclang=enThe previous post, I referred to was this one.
The Groove application error
http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/10c8f8d6-D225-481e-99CA-4e048d401c2c -
Error code "Windows printer Interface does not.
Original title: print queue stüch document display in the suppression of landmark when he is not removing or printing when it is not printing printer interface window error msg does not have already reinstalled driver 4 times turns on is quite what is wrong
error code "Windows printer Interface does not ' happens too times I have re installed printer drive 5 times also status on a print document shows in printing when printing does not then when I try to cancel the document it shows deleting but its not sound help please frozen. Thanks richard
In order to answer your question, you need to tell more about your hardware system configuration.
No assumption here:
(1) the printer must be compatible with your operating system. Follow the program and manual installation. Normally, these measures ensure impeccable installation.
(2) re - install the printer before removing all previous printers will cause you problems. Delete all incidents related to this printer software.
(3) most of the software are installed everything first, without the connected printer. You will need to follow the guests. Remove the CD. The system receives a reboot, the power and the USB cable are attached, you turn it on and the computer detects the device. So actually, it installs the appropriate driver package. This is typical.
-
Runs the command "regsvr32 quartz.dll" shows 0 x 80040154 error and the laptop webcam does not work
Hello
Thank you for your response.
I appreciate that you have attached a screenshot of the problem.
Have you tried troubleshooting of hardware and devices running?
Please refer to the suggestions of Naman R responded on 1 April 2011 and check if that helps.
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/DllRegisterServer-failed-with-error-code-0x8002801/403ee0d0-895B-E011-8dfc-68b599b31bf5Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://Windows.Microsoft.com/en-us/Windows/back-up-registryI hope this helps.
Thank you
-
Hello
I get this error when you try to run the sample of cards on the corrugation Simulator:
Oh, Snap! Build request failed with the message: [ERROR] an archive or directory does not exist in the specified path: "/ Users/Calgacos/Library/Application Support/Google/Chrome/Default/Extensions/cnijnnaimeaacneklcndcafbnkeicckh/0.9.16_0/services/node/node_modules/rbd/Packaged/Maps.zip".
The .../rbd/Packaged folder is writable and the Maps.zip will be created in the folder ~/RippleSites/Maps/Packaged. With the help of Mac, the latest versions of everything. The application runs in undulation ok, but I can't throw on the SIM BB10.
Someone else have this error and know why?
PS the Maps.zip does not get created (or copied) in specified folder, of course, but why?
PS try another application and it worked but is too has not put its zip file into the folder... rbd/Packaged. I guess it should not but leaves me clueless as to whats wrong with cards.
Thank you
The two directories (in the extensions directory and maps project directory) have permissions to 777.
But you gave me an idea...
It turns out that simply by putting
"Packages".
in setting output wasn't enough, I need the full path
for example: "/ Users/username/RippleSites/Maps/packed."
and presto, now it works!
Thank you!
Maybe you are looking for
-
That's the thing when I select "tabs on top" the detroit of the bar tabs in title bar... and when I uncheck, it falls below navigation. with ff4
-
Images of the shared folder on the desktop computer
I have Windows 8. A duplicate of the folder my pictures came one day on desktop my computer in. The two files have identical files. Any action I take with photos in the folder my pictures is automatically duplicated in the folder on the desktop.
-
Failure of Service connection of user profile on Vaio Windows 8
I have a 2 year old Sony Vaio running Windows 8. The wifi/internet connection did not work so I did a reboot of the system. However, the fall out of this is that I'm now are more able to connect. I get a "user profile service has no sign. Could not l
-
After the passage of the UEFI boot problem boot in legacy (V5 - 471 g ACER WINDOWS 8)
Hello! I just change the boot settings in the BIOS to UEFI for Legacy (Windows 8). After passing them, I turn on my laptop and I see "Operating system not found" and "Media test failure, check cable of...» "Moreover, I use an Acer V5 - 471 G Windows
-
It gives me this error "could not generate code to activate one or several web fonts on the page. No idea what is causing this problem? Thank you very much