PC will not start and crashes on windows update

Similar Questions

• HP laptop will not start and cannot reload Windows due to corrupted files

  I have a HP laptop, (belongs to my grandson) and am not able to reinstall Windows. I get an error 0xc0000098.
  I wanted to get into the Bios to format the hard drive, but I could not.
  Any suggestion to solve this problem?
  Thank you very much.

  John

  Hello

   
  1. What is the model of the computer?
  2. Once you get the error message?
  3. What is the exact full error message
  4. have you made changes on the computer before this problem?
  5. what version of Windows you are trying to install?
   
  For the information of the BIOS:
  I suggest you to consult the manual of the computer. You can also download the manual of the laptop from this link using the laptop model.
  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  You can contact the manufacturer of the computer for the installation of any related issue of BIOS support.

  You don't have to go into BIOS to format the hard drive.

   

  Consult the following links if you are using Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

   

  http://Windows.Microsoft.com/en-us/Windows7/Windows-7-installation-problem-cant-boot-to-installation-disc

   

  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

   

• After the blackout, VMs will not start and Vsphere Client cannot be re management/access / start VMs on a physical server.

  After the blackout, VMs will not start and Vsphere Client cannot be re management/access / start VMs on a physical server.

  Get the error message...

  [	[: start: W: 1] 2016-06-09 14:41:36.562 Log for vSphere Client Launcher, pid = 4532, version = version 5.0.0 = build-455964, option = released
  [	[:QuickInf:W: 6] 2016-06-09 14:42:20.421 the value of the search dll C:\Program Files\VMware\Infrastructure\Virtual Infrastructure Client\5.0 path
  [	[:QuickInf:W: 6] 2016-06-09 14:42:24.281 load shared dll: C:\Program Files\VMware\Infrastructure\Virtual Infrastructure Client\5.0
  [	[ : start: w: 6] 2016-06-09 14:42:41.406 Log for vSphere Client, pid = 4532, version = version 5.0.0 = build-455964, option = release, user = root, url = https://192.168.10.200/sdk
  [	[:ShowExcp:W: 6] 2016-06-09 14:42:42.406 error: an internal error has occurred in the vSphere Client.

  Details: The initializer for type for 'VirtualInfrastructure.Utils.ClientsXml' threw an exception.

  Contact VMware support if necessary.

  System.TypeInitializationException: The initializer for type for 'VirtualInfrastructure.Utils.ClientsXml' threw an exception.

  at VirtualInfrastructure.Utils.ClientsXml.FetchIfClientsXmlExists (String serviceUrl)

  at VirtualInfrastructure.LoginUtils.LoadMatchingVI (String serviceUrl)

  at VirtualInfrastructure.LoginUtils.CreateNewService (String serviceUrl, ClientSpec clientSpec, Boolean waitForTopology, Assembly / viAssembly)

  to VMware.Vim.Client.VimClient.StartUp (2 specMap, String [] arguments dictionary, Manager of LoginEventHandler)

  to VpxClient.UI.InitializeVimClient (dictionary 2 specMap, String [] arguments)

  to VpxClient.UI.StartUpIfNotMultiVcSecure (dictionary 2 specMap, SecureString password, String [] arguments, LoginEventHandler Manager, String, dllPath, list 1 listOfVcUrls)

  System.TypeInitializationException: The type to 'VirtualInfrastructure.Utils.TypedXmlSerializer ' 1' initializer threw an exception.

  to VirtualInfrastructure.Utils.TypedXmlSerializer'1.ctor)

  to VirtualInfrastructure.Utils.ClientsXml... cctor()

  System.IO.IOException: The process cannot access the file "C:\Documents and Settings\XXXXUSERNAMEXXXX\Local Settings\Temp\nyhn4bev.dll" because it is used by another process.

  ...

  to System.Xml.Serialization.XmlSerializer... ctor (Type type)

  to VirtualInfrastructure.Utils.TypedXmlSerializer'1.cctor)

  -End of the exception stack trace internal-

  -End of the exception stack trace internal-

  After many unsuccessful attempts tried to connect Vsphere client, the client has finally connected and was able to on all virtual machines. Thanks to Luciano Patrão for study. For all in the community, peace out...

• Installation of fuse will not start and I can't find it in the application of the CC.

  Installation of fuse will not start and I can't find it in the application of the CC

  Great!

  You are welcome!

  P.S. If you use the Adobe forums, please check useful/correct responses from the staff/helper, if there is.

• Error code 646 is displayed when I try to install & reinstall KB2680317. It will not install and my pc (Windows Vista 64-bit) keeps crashing.

  My pc has attempted to install Windows Update (see above) without success. Tried the Microsoft Fix It without success. Computer continues to crash with attempts.

  Hello

   
   
  
  Were there any changes (hardware or software) to the computer before the show?
   
   
  Method 1: try the manual steps from the link below and see if the problem is resolved.
  http://support.Microsoft.com/kb/2258121 
   
   
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
  For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  
  Method 2: perform the steps from the link below and see if it helps.
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
   
  
   Method 3: download and install the update manually and see if it helps.
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=29346
   
   
  Hope this information helps.

• whenever I touched icon it will not start and sent the report but heard nothing back

  Since yesterday, when I click on the firefox icon that it does not start, it shows the screen of crash reporter and said that he will attempt to restart, but when I type restarts, it crashes again. When I hit exit firefox sends report but ive heard nothing back. not sure if I need to download the new copy or wait for the response.

  You can check if you can start Firefox in Safe Mode by holding down the shift/Options key.

  • https://support.Mozilla.org/KB/safe+mode

  Try to start Firefox with the subject: blank page by creating a copy of the current Office Firefox shortcut and add a space and -url "about: Virgin" in the target field.

• Satellite A65 will not start and I get only the blue screen!

  When I start my satellite A65 a blue screen comes up saying "a problem has been detected and windows has shut down to prevent damage to your computer.
  It says to check if I have enough disk space or to disable or update the driver, if a pilot has been mentioned in the stop message... or to check the updates to the bios...
  I can type everything that said if I need, but the jist

  The world is - that sound familiar at all?
  It may be because I was not updated enough when he told me to.
  It does not start, not even on safe mode, and it won't let me not restore, which I would be perfectly willing to do at this point.

  help, please
  Joly

  Hello

  The blue screen of death usually occurs because of the serious software problem or due to malfunction of the equipment.
  In your case, it looks more like something wrong with the hardware. Why, because you're not able to restore the laptop from the recovery CD Toshiba delivered!

  Need buddy? I think that the laptop should be verified.
  Try to contact an ASP in your country and ask for later handling.

  Good luck

• Operating system will not start and run - error codes 2000-142, 0F00:075 D, 41166486 uncorectable data error media wrtie block protect error code 0F00-0244

  I have dell 1525 top of the tower and OS will not run. Error code 2000-142, status bite 79, error code 0F00:075 D and Bios memory hard drive, SATA drive read your 41166486 data uncorectable media wrtie error block protect error code 0F00-0244then kept showing up on several more blocks.  Can I fix?  Joe

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Try to start the computer in safe mode and check if you can start the computer:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  Try to perform the verification and startup repair if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  It will be useful.

• Vista Service Pack 1 update fails - computer will not start and cannot be repaired

  The computer which is an Acer desktop computer, running Windows Vista Premium.  In the last 6 months updated Vista tried Service Pack 1 update to install Vista about 8 times and failed every time a reason any.  Just before this latest incident, a facility was "cancelled" in the Middle for some reason any.  I restarted the computer and almost immediately was advised that there is an update, which turned out be SP-1.

  I started the update, and some time later I received a message that the update was successful, and that he had to be restarted the computer.  I clicked on the button restart and the Installation continues during the shutdown.

  When the computer tried to restart initialization failed and I ended up after several lines of information that looked as if it might be checking drivers and then information began to look as if she might be reading the register lines.  Each line has 2 numbers separated by a slash (/), who scored on a single line at the top of the screen, (white letters on black background) after a certain time the count to stop with the line of text of flickering on the same entry.

  It is the line that goes to the screen when the information keeps changing.

  !! 0xc01a001d!  37636/92292 (\Registry\Machine\components\winners\x86...)

  Since the failure of the Windows Vista SP1 update, when the system begins to start, after a short while, he starts playing what seems like lines in the registry, and after a few moments he always stops with the same accurate information just flicker.  At this point, it seems that this scenario will continue forever.  The hard drive is accessible, as if trying to read something, over and above.  The hard drive light flashes, instead of being on regularly, but only for a while.  After that, even the flickering stops.

  I have tried to start mode without failure, then after loading some files and after some time (5 or 10 seconds) the displayed files always end with the same file at the bottom of the list and what seems to be a status extend the message please know...  Shortly after the screen is empty, the fails to start and the computer is restarted.

  Usually what will happen is that the computer will begin to start up again, but because the previous boot failed, it asks if you want to go to startup repair, which, at first, seems to work fine, but after a little time it brings up a dialog box asking if you want to restore to the previous good Restore Point.  The display will then return to the same routine he had previously, and she runs to always if not interrupted.

  If you click the Cancel button, a message appears indicating that you cannot interrupt the current process, so the only way that you can try something else is to Shut Off the Power in now the switch down, permanently.

  [Note: the notes above have not all accurate messages, Word for Word, exceot for the Hex error line.]

  Hello
   
  Thanks for posting on Microsoft Answers.
   
  Try to put the folder windows update catalog distribution and software
  Try the following steps:
  1. Insert the Windows Vista installation disk into the disk drive and restart the computer.
  2. When you are prompted to restart from the disc, press any key.
  3. When you are prompted, configure the language to install, time and currency format and keyboard or options for method of entry that you want, and then click Next.
  4. on the page to install Windows, click on repair your computer.
  5. on the System Recovery Options, click the version of the Windows Vista operating system that you want to repair, and then click Next
  6. in the System Recovery Options page, click command prompt.
  7. type cd C:\windows\winsxs, and then press ENTER.
  8 type ren pending.xml pending.old, and then press ENTER.
  9. in the registry editor, find and delete the following registry subkey:
  HLKM\Offline Components\AdvancedInstallersNeedResolving
  HKLM\Offline Components\PendingXmlIdentifier
  HKLM\Offline Components\NextQueueEntryIndex
  10. at the command prompt, type exit to quit the registry editor. Press ENTER.
  11. click on restart
   
  More information:
  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista: http://support.microsoft.com/kb/949358
   
  Hope this helps
   
  Kind regards

  Niranjan
  Microsoft Answers Support Engineer

  
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Speech recognition will not start and continue to run

  I am running vista 32-bit Home Premium edition. I finished the speech recognition session setting the microphone. I finished the tutorial.  However, no voice recognition program continues to run. When I run the program of recognition (or when it is started automatically to the 'start-up', it starts to run and then goes into "Sleep" mode for a few seconds and then on 'Off'.  The second time, I start speech recognition he will say 'Start speech recognition' and then go directly to 'Off '.  When I click on the microphone icon in an effort to implement the program "On", I get an error of speech recognition that says "Please restart speech recognition. It is said in the body of the error message "speech recognition has encountered an error. Please restart speech recognition to ensure that you can continue to use the speech recognition".   When I restart speech recognition error repeats.

  Although the speech recognition tutorial seemed to work, the real speech recognition program doesn't have.

  Does anyone know a fix for this problem? Thank you.

  Hello Dirleton,

  Thank you for your message.  For testing purposes, could you try creating a new account on your computer?  The process is described below:
  * make sure that you logged in with an administrator account *.
  1. click on the 'Start' button > right click on 'Computer' > select 'manage '.
  2. click on the arrow pointing down next to "local users and groups.
  3. highlight "users."
  4. in the right pane, right click and select 'New user' (enter information, then select OK)
  5. now right click on the new user and select "Properties".
  6. Select the "Member" tab and click on 'Add '.
  7. in the box type 'Administrators' and click on "check name".
  8. click on OK
  Then log off your computer and connect again the new account.  Test the speech recognition, this will rule out a problem of profile corruption.  We can then troubleshoot further.
  Please let us know if this or don't help solve the problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Re: Vista will not start after the installation of update

  About 2 days ago I updated 2 Optional updates through windows update. It was - Input - Synaptics Synaptics PS/2 Port TouchPad
  and somethind to do with sound hdmi (don't know why I got this update ' cos I do not have a hdmi and I accidentally installed it as well).
  After that installs Vista won't start so I did a restore of the system in safe mode, and she came back to life, however, isn't in better shape, will probably not not to install Vista all over again.
  So be careful when you install these updates.

  It's weird that they came with windows update. As much I know usually windows update does not update if not needed harddrivers...

  You need to update your hardware drivers from the Drivers Toshiba download site and not from Windows update because no one knows if they interfere with the drivers of Toshiba.

• Vista system does not start after installation of windows update 10thFeb2010. Only start in safe mode. Windows Update does not open

  Updates to auto (windows Update) using.  Downloaded automatically update yesterday (10thFeb10) and when I shut my computer down it started to install them - as usuall.  However start my computer than this 11thFeb10 am and he began to run through regestry files when starting up.  Then it is impossible to load windows.  Just went to a blank screen.  Rebooted several times and were able to start it in safe mode.  Tried system restore but the same thing happens.  Obviously there was something to this update that 'changed' my computer and I'm not happy about it!  Also thought that there could be new updates (perhaps to fix the last update) but I can not even Windows Update to open it.  Tried online and he tells me that I have never downloaded updates and that none are available.

  I use Windows Ultimate x 86.  I hope someone can help me!

  Got a response from Ms.  Good all who have this problem - you have an ATI Radeon graphics card?  Driver is causing the conflict.  Uninstall all the stuff ATI goes on ATI web site and install the download of 'single driver '.  Reboot and then you can download and install other fancy programs that come with your graphics card.

• Windows 7 will not install the drivers or windows updates

  Hello

  I tried to update my iPhone 5 and in the middle of the update, when my computer tried to install a new device driver, the installation failed. I tried to use a flash drive I've ever used on my computer and its driver installation failed as well. However, I used the iPhone 4 friend (that I used to have) and it worked fine. It seems that my computer don't just install the new drivers. The drivers that I have used before still work. In addition to my driver problem, my computer will also not succeed a windows update. Download updates, but then when I restart the computer to apply the updates, it fails every time. Any idea will be useful. My phone is currently stuck in recovery mode and iTunes can't recognize it to restore it because of my driver problem.

  Thank you

  Hello Cara,

  This problem is usually due to any third-party security software that blocks the installation. I would like to know some information about this problem so that we could help youo more.

  1. what security software is installed on your computer?

  2. do you get any error code or error message? (Mention the error message)

  3. have you made changes on the computer before this problem?

  As a first step, I suggest you to reset the Windows Update components and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us

  I would suggest trying the following methods and check if it works for you.

  Method 1:

  Run the fixit for the following Microsoft Fixit.

  The problems that the programs cannot be installed or uninstalled:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Method 2:

  Temporarily disable the security software and check if the problem persists.

  Disable the antivirus software:

  http://Windows.Microsoft.com/en-us/Windows/disable-antivirus-software#1TC=Windows-7

  Warning: If you need to temporarily disable the security software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

  Try the steps in the following Microsoft Support article and check if it helps.

  How to fix problems with the Windows service install:

  http://support.Microsoft.com/kb/2438651/en-us

  Please reply with the status of the issue so that we can better help you.

• Presario SR5507F does not start for Vista after "Windows Update"

  One of my friends has a Compaq Presario SR5507F. She is old and doesn't know much about computers. She told me she had a message that an update of Windows was necessary, so she hit 'continue' and walked away. When she came back, the computer was restarted on a screen, she had never seen before: a black screen, with the 'C' and "Compaq" logo in red in the Center, with " and " on the lower left and " and v5.27 ' on the bottom right side.

  I checked to make sure that the keyboard was solidly connected - the NumLock lights etc flash momentarily when the computer starts.

  We have tried pressing ESC, F10 and F11, in various methods: turn on the computer, and then hit the button, turning on the computer using the button is pressed, turn on the computer and repeatedly hit the key, etc.. All had the same result - the screen with the logo of Compaq, and nothing else happens.

  I know that some on computers, but that me stem.

  Of course, she didn't know she should do a set of recovery discs, is not so... she.

  If anyone has any ideas, I'd be happy to hear.

  Hi biolabprof01,

  Sorry to hear about the sentence. There are a number of things to try. First, try the procedure described in this HP support document on Vista won't start do not.

  If you can, try to perform a System Restore or System Recovery.

  If you still cannot start and cannot access the System Recovery Wizard, you can order HP recovery disks (see the section on CD - ROM order page).

  I hope this helps. Let us know how it goes.

• Windows will not start and repair failed. Can I upgrade to Windows 7 from this situation and get Windows 7 to begin?

  Any help will be apprecdiated.

  Normally, you do an upgrade from the inside of the race and activated the operating system.

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner