HP laserjet120: replace the drum unit

Similar Questions

• 2605dn: mirrors image 2605dn - replace the drum unit? How

  Hi I have HP Color Laserjet 2605dn. Recently, I replaced the black ink cartridge. However, now when I print, I feel in black or color, it reflects the part of the image on the page. I calibrated and cleaned and ran reports of the printer. It prints fine, but when I print from my browser or application it reflects the image on the page. Please see attached.

  How can I fix?

  Will I need a new drum? If so, where can I buy it and how to replace it?

  As I said in my first answer, is the black toner cartridge.  You got a bad.

• an imaging drum replaces the individual color cartridges

  Noticed that an imaging drum is available for laser all-in-one HP M177fw. Question: an imaging drum replace toner cartridges (4) or the drum is a requirement for a separate equipment?

  Imaging drum is separated from the toner cartridges.  document here can help determine if you need to replace the drum for Printer Color Laserjet M177fw.

• My printer HP LaserJet 1536dnf printer prints black pages after replacing the toner with a new one!

  I changed the toner cartridge for my printer HP LaserJet 1536dnf with a genuine HP toner cartridge and now it's printing the pages in black.  Any suggestions on how to fix this?

  Thank you!

  Hi @Beaglemom49779,.

  I see by your post that you have replaced the toner and now get all black pages. I can help you with this.

  Have you had the same problem with the printer before replacing the toner?

  It could be a hardware or with the printer fuser problem.

  If the problem started just after replacing the toner then most likely, the toner.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector)

  Number one cause of problems with toner.

  Check if the drum unit for damage:

  1. remove the cartridge of toner product and check that the tape has been removed.
  2. check the memory chip for damage.
  3 examine the surface of the imaging drum on the bottom of the toner cartridge.
  CAUTION: Do not touch the roller (Imaging drum) on the bottom of the cartridge.

  His fingerprints on the imaging drum can cause print quality problems.
  4. If you see the scratches, fingerprints, black on the drum, or any other damage on the imaging drum, replace toner.
  5. If the imaging drum does not appear to be damaged, rock the toner cartridge gently several times and reinstall it. Print a few pages to see if the problem is resolved.

  Please call our technical support if the there is a problem with the toner and you learn about a replacement, to the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Contact HP.

  Good day!
  Thank you.

• Which is the * which replaces the zip codes with "United States".

  So I use the calendar for my daily schedule of the customer. Recently, I made the mistake of upgrading to OS (always a mistake with apple these days) and now have a MAJOR problem with the location field.

  Some * at apple decided to replace the postal code SUPREMELY USEFUL with 'United States', when I get an address and ap auto fills in the rest. I tried replacing it and not selecting in the dropdown list options that appears when I start typing in a speech, but it is on its own.

  Must say replacing a very specific data item for something so broad that the United States is one of the stupidest things, Apple has done recently (apple doing stupid things is unfortunately too often PJ {Post job}).

  I drove to the wrong address several times that big cities like THE have often more than a street with the same name. Get a zip code has been a great way to avoid this problem, but some Morón has decided to get rid of post code data and the access point has no option of preference to add in the zip code.

  Be sick enough Apple make these kind of nonsense that would never happened before (Ex: decide to move progress bars to 100% immediately independent to the extent of the progress are actually completed).

  Anyone know a work around? The only advice I receive from apple is to return to an older operating system (great work apple.) Train me to not trust and avoid your new operating system.  Great idea, is NOT).

  Post edited by: codr

  I know that we just spend an hour on the phone with apple care and they told us the same thing. We need these postal codes to be there so that we our sellers in the right place. missing or being late for the appointment is very professional. We need apple to fix this ASAP.

• How to replace the units of a channel using scripts % 3F

  Hello

  I have a few questions about the manipulation of the channel property 'unit' by scripts.

  Case 1: If the unit in the chain is not specified in the properties, what command should be used to add the inside unit?

  Case 2: When I create using the string ' Call.Root.ChannelGroups (1). Channels.Add ("name", DataTypeFloat64, 1)', empty space of unity being, what other command can be used which was available to the units to the breast?

  Case 3: Consider that I have channel (channel A) with the already defined unit (x), how can I replace the unit with another (y)? (Units of x and there belong to different physical quantities, so the ChnUnitConvert)

  Pls let me know if you nee details on the same.

  Kind regards

  Fazil Shah.

  Hi Fazil,

  The key word for SCRIPT DIAdem units is "unit_string". If you open the SCRIPT and open the channel property list you can select the property unit and drag & drop it in the SCRIPT Editor. This creates the code of script for the property.

  Case 1
  You have the options of towing: a quallified assignment complete or a channel object variable (if you have more settings for the channel of the second alternative is better)

  Data.Root.ChannelGroups (1). Channels ("mychannel"). Properties ("unit_string"). Value = "MyUnit.

  or

  Dim oChn
  Set oChn = Data.Root.ChannelGroups (x). Channels ("mychannel")
  oChn.Properties ("unit_string"). Value = "MyUnit.

  case 2
  You must add the unit after the creation of the channel

  Set oChn = Data.Root.ChannelGroups (x). Channels.Add ("MyChannel", DataTypeChnFloat64)
  oChn.Properties ("unit_string"). Value = "MyUnit.

  case 3
  It's the same as case 1 or if you do not want to use an already existing channel device, it can look like this

  oChnA.Properties ("unit_string"). Value = oChnB.Properties ("unit_string"). Value

  I hope that answers your questions

  Greetings

  Walter

• I got a low ink warning on my mac for my printer epson artisan 837. I replaced the cartridge, which was low, but he still reads the low ink level on the mac, but full bed on the epson Control Panel.

  Well, I replaced the cartridge as usual, and osx is not that the printer is now complete: says, "printer may be out of ink" on the status. Ink levels will be not displayed via the computer but check out on the printer.

  Restarted both units and in vain.

  WiFi is not a factor.

  If anyone has a solution or any ideas, please help.

  Thank you!

  You can try to disconnect the printer, restart the computer, reconnect with the printer, and then try again.

• If my Macbook Pro is under Applecare extended it reduces the cost of replacing the battery?

  If my Macbook Pro is under Applecare extended it reduces the cost of replacing the battery?

  How much is usually charged for the replacement of the battery?   (in the United Kingdom)

  Thank you

  If it's a warranty or Apple Care + the covered replacement instance, it should be free.

  Otherwise:

  Mac Service Pricing - Support Apple laptops

  https://support.Apple.com/en-GB/Mac-notebooks/repair/service/pricing

  13/15 inch MacBook Pro

  £99 INCLUDING VAT.

• Replacing the screen on Satellite C50-A-1CK

  Hello

  The screen of my C50-A-1CK Satellite was recently broke and I need a replacement, but I have no experience with this sort of thing. Editing actually screen won't be a problem (I'm lucky enough to have friends who will fit it free) but I need to buy one and I'm not sure which one to buy.

  I'm looking for something around £40 or less if possible, and I'm in the United Kingdom, if a British salesman would be best. I would prefer to get one on eBay, if possible, so I would really appreciate if I could get a link rather than just "oh looking for it and you will find.

  I thank very you much in advance!

  To be honest, it is not easy to give you some good advice on this. Why? Replacing the screen is rather complicated and almost entire laptop must be disassembled. To do this you need manuals maintenance with explanation step by step how to do this and avoid any damage. This document is not a public document, so I do not know who want to help and how.

  If a person without experience and expertise want to do this, can damage your laptop even more. There are many smallholders plastic that can be broken or damaged.

  I don't know, but in my opinion, you should contact Toshiba service nearest and ask for help. It costs a little, but it will happen on the vocational track.

  Anyway, I don't live in the UK so I don't want to pick you up. You can check ebay UK and search for 15.6 HD 200 CSV LD and if you find a seller contact by phone and check compatibility with your laptop satellite.

• Replacing the hard drive on my Portege A200

  Hi, I would like to replace the hard drive in my a200 with a bigger, but I don't know how to remove the current, just wondering if any of you guys could help me?

  Thank you james

  Hello James

  Unfortunately the A200 does not for me, but the concept is still the same. At first check if you can find coverage of HARD drive in the lower corner of your unit. If you can't find it from the outside as it comes to the very complicated situation. It is possible that the HARD drive is under the keyboard.

  If you have not many don't experience do it alone, because you can damage something, and the guarantee is no longer valid.

  Good luck!

• Replacing the screen on the Tecra A10

  Ladies and gentlemen

  Please someone know how to get to a screen on above laptop. I don't see how to get the palmrest and screen separated from the motherboard, but how I get to the screen to replace it, I cannot say.
  Your
  Ian

  You need to take off the mask LCD joints and remove the 2 screws (one on the left) and one on the right side. After making the cover of this separate the LCD and cover entire while releasing the latches. Ribbon of glass must be removed.
  Unplug the LCD beam and HV operate via the connectors on both sides of the FL inverter and remove FL inverter.
  Remove the glass ribbon and unplug the beam of the LCD screen of the LCD unit connector.
  In the end, you must remove 4 screws and LCD screen.

  It is quite complicated so do gently to avoid damage.

• My ink carriage does not move to the way to replace the ink cartridges. I think I put the ink in the wrong office

  My ink carriage does not move to the way to replace the ink cartridges. I think I put ink in bad officejet 3830

  Hello! Welcome to the community @Tammy111 HP

  I read your post about the ink carriage being stuck in your Officejet 3830, and I wanted to respond to troubleshoot. Try these steps and if the transport is not yet move to order so that you can access the ink, then your best bet would be to call phone support to see if they can replace the unit for you. I'll leave their details below.

  HP OfficeJet 3830, DeskJet 3830, 5730 printers - an error 'Transport Jam'

  Click on the thumb to below testify my help!

  Click on the "accept as Solution" if I'm you guide to a solution!

  Contact HP:

  Step 1. Open the link: www.hp.com/contacthp/

  Step 2. Enter the product number or select Auto detection

  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.

  Step 4. Scroll down and click on: contact HP options - click Get phone number

  File number and phone number appear

• Replace the RAM memory on TOSHIBA NB510

  Hello

  I just bought a Toshiba NB 510 - 10 d and I just can't find where should I change the RAM memory.

  Can someone help me?

  Thank you!

  Hello

  I found beautiful film from YouTube how to replace the RAM for Toshiba NB500, NB520, NB550D series
  http://www.YouTube.com/watch?v=6mnQQbladnA

  Select this check box.
  Remove the plastic cover at the bottom of the unit you will see the HARD disk and the memory modules. Spread the latches to lock two memory so that the module memory will appear. Pull the module from memory, and on an angle, using care not to touch the connectors. Remove the memory module.

  All that s.

• HP Pavilion Notebook n267sa 15: replace the hard drive and restore its 8.1 windows

  the hard drive corrupt including the partion of rescue I had to replace the hard drive. This left me with a work computer, but no o/s. where and how can I get a copy of the 8.1 window without having to buy a new copy

  Hello:

  You can order this e-partner HP recovery disks from the link below for your model.

  http://www.best2serve.com/page/rcd_landing?txt_search=F9F41EA

  You can also see if you can order directly from HP to the United Kingdom by calling this number...

  0207-660-0596

  Mon - Fri 08:30 - 18:00
  (except public holidays)

• How to replace the CD/DVD-Rom on Satellite Pro 2100

  Hello

  My laptop's dvd - rom drive is old and broken, now that I have here an other dvd - rom drive, but I don't know how to remove the old dvd - rom without removing all parts of my laptop. Is there some service manuals how to replace the dvd - rom drive?

  Hello

  I m not 100% sure on the CD/DVD drive replacement on this laptop, but I assume that the procedure is very similar to other portable players.
  For the most part the ODD is secured with the screw at the bottom of the unit.
  You will need to remove this screw to get out and to swap the drive.

  But be careful and don t there if you have no experience!
  Moreover, not all readers are compatible and supported in reason parameters master/slave/c-salt. If you n t know which drives are compatible you should ask the ASP in your country for advice!