HP Mini 1000 and Windows XP

Similar Questions

• HP Mini 1000 Bio lost password

  Hello all first time poster. I recently found an old hp mini 1000 running windows xp in my garage that I want to use for navigation for my daughter of web-based, but I forgot the bio password I put on. After 3 attempts to password I get an error string CNU9182z1n of evil. Any help? Thank you in advance all

  Hello

  Try to enter: e9lo3u7039 (3rd character is a lowercase L and the 8th sucks)

  Kind regards

  DP - K

• Reset password on HP Mini 1000

  Hello!

  I recently acquired the HP Mini 1000 and receive the failed password verification message. Nobody remembers. Can it be reset, I see in other threads? SN [personal information]

  Thanks for your time!

  Hello

  Be aware that it is not taken in charge by HP and you try at your own risk.

  Try to enter e9lof3p54k (to be noted in both cases that the 3rd character is a lowercase L)

  or
                                          e9lof3p5rk

  Kind regards

  DP - K

• Failed verification of password of HP Mini 1000... need code to open a session

  I have a helping hand me down HP mini 1000 and I get the following

  Password check failed

  Fatal error... System stopped

  CNU9243KDB

  can someone help me get it up and running again?

  Thank you

  Eric

  Hello

  Enter: e9lo7vfstp (3rd character is a lowercase L)

  Kind regards

  DP - K

• HP Mini 1000: HP Mini - check password failure, please send me the password!

  I have a HP Mini 1000, and I can not connect. I tried 3 wrong passwords, and he says:

  "Password check failed, fatal error... System stopped. »

  CNU9352YBJ

  Please send me the new password!

  Hello

  Enter: e9lofq7ipw (3rd character is a lowercase L)

  Kind regards

  DP - K

• HP Mini 1000 BIOS lost password

  
  

  488gith wrote:

  Hello

  It seems that a friend decided to be funny and set up a password on my netbook, but I forgot to write down it somewhere.

  It's a HP Mini 1000, and after 3 failed attempts, I get the following error:

  Password check failed

  Fatal error... System stopped

  CNU92395KM

  What can I do?

  Please someone help me!

• Hello!   I LOST THE PASSWORD OF MY NET BIOS (HP MINI 1000)

  Hello!
   
  I LOST THE PASSWORD OF MY NET BIOS (HP MINI 1000)
   
  This is the HP Mini 1000, and after 3 failed attempts, I get the following error:
   
  Password check failed
  Fatal error... System stopped
  CNU9152RQP
   
  What can I do?
   
  Please someone help me!

  Hello

  Try to enter: e9lo3q7b52 (3rd character is a lowercase L)

  Kind regards

  DP - K

• HP Netbook Mini 1000 Bios lost / forgotten password

  Hello!

  l is a HP Mini 1000, and after 3 attempts I get the following error:

  Password check failed

  Fatal error... System stopped

  CNU9165914

  What can I do?

  Please someone help me!

  Hello

  Enter: e9lo3gqo3v (3rd character is a lowercase L)

  Kind regards

  DP - K

• Deskjet 710/720/810/820/1000 Series printers - Patch for 64 bit Vista and Windows 7

  There is a problem with the 64-bit, Vista, Windows 7 and Windows 8 or 8.1 drivers which causes the spooler crash with the following HP Deskjet printers:

  DeskJet 710

  DeskJet 712

  DeskJet 720

  DeskJet 722

  DeskJet 810

  DeskJet 812

  Deskjet 820

  DeskJet 822

  DeskJet 1000

  The attachment contains a fix for this problem for Vista and Windows 7.

  [The patch does not work for Windows 8, 8.1, or 10 x 64 systems.  There are efforts to this address, if a solution is developed it will be shown here.  [{Edit - I did not progress by getting the patch to run in Windows 8 x 64.}]

  First of all make sure that the driver for the installed printer.  If the driver has not been installed go to start devices and printers, add printer, the local printer, choose the appropriate port (for the converters, USB-parallel, the port likely USB001: or maybe USB002 :), then click Windows Update then choose HP for the manufacturer and select the appropriate printer.)

  Apply the patch as follows: log in to the computer with an administrator account.  Download the patch by clicking on this link or on the trombone at the end of this post.  Save the hotfix on your computer, then unzip it.  Then, copy the three DLL files in the following directory: %windir%\system32\spool\drivers\x64\3

  Note that %windir%\System32 is a system variable that points to the location of the Windows directory. For most systems it will be C:\Windows.  You can click Start, computer, and type %windir%\system32\spool\drivers\x64\3 in the address bar and it is in the right place.

  This can be done from a DOS command prompt if BACK is opened with the "run as Administrator" command or to explore with a copy and paste.  Depending on your UAC settings, you may need to provide confirmation.  Also allow existing files to be replaced if you are prompted.

  This patch is not necessary and should not be applied to a 32-bit version of Vista or Windows 7.

  Thanks to extraordinary Microsoft engineer Alan Morris forguidelines for patch.

  Update - here is that of the more detailed installation instructions:

  Download the patch on the DJ_Patch.zip at the bottom of the page and save it on your computer.  Now click on the file and open it, and then extract the fix in a directory that is easy to find. (I use c:\temp. If this directory does not exist you can create it as follows: open the administrative BACK prompts by clicking Start, all programs, accessories, and then right-click on CMD. EXE and select run as administrator. Click in the DOS window, and then type the following command:

  MD c:\temp

  CD \temp

  Now extract the patch files in the c:\temp directory (all, extract c:\temp chose as a destination).

  [Update - Windows security settings can prevent these files from being used, please open computer, type c:\temp in the address bar and then right click on each of the dll files and select Properties.]  If there is a message indicating the properties file has been downloaded from the internet and can be blocked and then unlock the file before continuing.]

  Then, click back to the administrative DOS prompt and type the following: (the green stuff are comments, do not type them...)

  *. DLL DIR (just to check that the files are there, it should list hpvdb720.dll, hpvdb820.dll and hpwm5db1.dll and perhaps others).

  Net stop spooler (ensures that the files are not in use.)

  Copy hpvdb720.dll C:\windows\system32\spool\drivers\x64\3 (this is for the Deskjet 710/712/720/722)

  Copy hpvdb820.dll c:\windows\system32\spool\drivers\x64\3 (this covers the Deskjet 820 and 822)

  Hpwm5db1.dll c:\windows\system32\spool\drivers\x64\3(this covers the Deskjet 1000 copy)

  NET Start Spooler

  Output

  [Edit - note that these DLL files will already be in the directory.  You will get a warning asking if it's OK to replace the files, say "Yes".]

  At this point, the patch is installed and ready to print.

  Note that here printers do not support USB connections, they have only the parallel ports. [Edit - if your printer has a parallel port to use, it will be probably much less problematic than the use of a converter USB / parallel].   If you use a make you converter USB / parallel it is supported in your operating system.  The following messages are reported by cables USB-parallel that are supposed to work in Windows 7.   A driver is required for the converter USB / parallel besides the driver of the printer.  For converters supported, it is usually provided automatically in Windows 7.  Note: the appropriate to select for USB-parallel converter port is often USB001:.  I've heard of cases where the port was USB002: or LPT3: as well.  If the port you are using is unable (after applying the fix) try to change the port by going to start, devices and printers, right-click on your printer and select printer properties, then click the Ports tab.

  Mick4 wrote: the problem is that I only could unzip the 3 dll files but don't know how to replace the bad dll files. Mick 4

  If you use Windows 7 do the following: log in as a user with the administrater properties.  [The following assumes that you are using IE as your browser] Click on the here link and select "Save".   Once the download is complete, select "Open folder", then right-click on the DJ_patch.zip file and select extract all.   If extract all is not an option, then click on "Open with" and select Windows Explorer.

  

  Leave the default directory and check the box "Show extracted files when you are finished", excerpt.   Click Start, computer, and type % windir%\system32\spool\drivers\x64\3.  Arrange the windows so that you can access the two parts of the window.  Go in the first pane and select the three files dll, hpvdb720.dll, hpvdb820.dll and hpwm5db1.dll.  Now drag and drop them to the % windir%\system32\spool\drivers\x64\3 window, select copy and answer to 'replace' in the dialog box.

  Note: %windir%\System32 is a system variable that points to the Windows directory.  For most systems it will be C:\Windows, but it can vary depending on the configuration of NDO of hardware configuration of the computer.  If you type %windir%\SysWoW64\cmd.exe in the address bar in Explorer or in start, search programs and files, it will find the right directory.

• HP MINI 1000: HP MINI 1000 PASSWORD RECOVERY CNU9150CHZ AND CNU9150BRY

  PLS HELP ME CNU9150BRY AND HP MINI 1000 PASSWORD RECOVERY CNU9150CHZ

  CNU9150CHZ = e9lo3q1ez0

  CNU9150BRY = e9lo3q1pbi

  source > https://dl.dropboxusercontent.com/u/26983620/Java_Bios/biosunlock.html

  You can then modify or disable in the bios settings, the bios password if necessary.

• sharing wireless with Windows 7 and Windows XP, mine is Vista.

  Periodically, I share a wireless connection with a computer laptop Windows XP and Windows 7.  When I connect mine to the internet (Vista), the other two are disconnected from the internet.  How do fix us this?

  Hello
   
  We recommend that you run the troubleshooter in Windows 7 and Windows XP Internet connection sharing to find what is causing the problem.
  
  On Windows 7, try the following steps.
  1. open the utility network troubleshooter by right-clicking the network icon in the notification area, then click on the problems.
  2. follow the instructions in the wizard.
   
  Why can't I connect to the Internet? http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet
   
  On Windows XP, try the following steps.
  1. click on start and then click Help and Support.
  2. under Pick a help topic, click fixing a problem.
  3. in the left pane, click Networking problems.
  4. in the right pane, click Internet connection sharing convenience store.
   
  For more information, see this link: http://support.microsoft.com/kb/308021
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Quick start for Windows 10: Satellite Mini click and others

  I had some problems with the camera and the battery on the Mini click and another Tablet from the Point of view (Holland).

  He occurered that after updateding etc. on drivcers restart the old problems would return that was due to the quick start option that is set in the bios NLE, but can also be disabled
  Settings > Power Options > Ssettings change existing > Shut doen settings > turn on TASF start [Uncech box]

  It seems that some applications don't close properly when you use the option stop and Hibernate in the memory of QuickStart.

  This occurs if you use either reboot option to turn off manually with a second 10 press the manual power button

  A note to tell you that you can also find the option above via
  Control Panel > hardware and sound > power options > etc.

• HP Mini 1000: Factory Reset

  I have a hp mini 1000 with an operating system windows xp and im trying to do a factory reset/recovery but I'm not sure how or where to do it. some much need the files and drivers have been removed and I need to reset to restore these files can someone help me with this problem?

  Ok:

  If the driver is installed, but the device has a problem.

  What you can try is to uninstall the device (right click on it and select uninstall), then reboot and install this driver and see if that fixes the problem.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3688870&swItemId=ob_101092_2&swEnvOid=1093

  I don't know why the file is in French.

• HP Mini 1000

  I have a laptop HP Mini 1000, model #1154NR.
  I have had him since September 2009 and it's probably about due to a new battery.
  "Battery Check" says he has developed a bad cell and needs to be replaced.
  Also, I have to constantly move the plug-in "cord" to keep load.

  The problem is, the operating system is Windows XP, and of course, there a
  a hard time juggling with newer software.
  So, it can be reformatted and use a version of Windows 7?

  If I had to send in for a new battery and software change along with a
  tune-up, how much can cost me? Or, I'd just better get
  a new laptop.

  main problem with these is a very bad CPU performance.

  On only 2 improvements are mounting a SSD & Windows 7, but even then it won't be a huge improvement & settle software av hard & have startup processes useless you won't see much of the gains.

  Your best bet is to just keep it as a spare & using the funds to buy a more recent machine...

• HP MINI 1000 Webcam very dark

  Why is the webcam on the mini 1000 very dark.

  Are there solutions for the future or present solutions available? I searched without a bit of luck.

  THE POSITION of FINAL SOLUTION (Please paste this into the first page)

  With all due Respect, this thread is turning into a hell hole of misinformation.   There is a massive confusion on two simple solutions to this problem.

  THE PROBLEM: HP designed this for a webcam webcam 'outdoors' by affixing a piece of dark, tinted 1 cm x 1 cm of Ribbon in front of the web cam, behind the screen overlay.  These shades the video extremely dark in all conditions except in natural light of the Sun.

  #1 SOLUTION: install the software that allows you to control the brightness/gamma.  If you increase both, your image will be slightly higher. Software options include (scroll to previous pages for links) Skype, MSMessenger, controls integrated Windows Movie and the HP Webcam Driver free (linked to the page 1 or 2).  THIS SOLUTION IS NOT A SOLUTION.  IT IS A MINOR SOLUTION AND YOUR WEBCAM WILL LOOK STILL DARK AND GRAINY, but it will be a little clearer.  HERE IS a LINK to THE OFFICIAL HP driver which is free and allows control of the brightness/gamma.  It's a quick download and easy installation.  Yet once this is only a partial solution: the official HP camera settings: ftp://ftp.hp.com/pub/softpaq/sp35001-35500/sp35414.exe

  SOLUTION #2: it's the only real solution.  Just open the top of your screen (it's super easy to make and the screen is designed to be opened and closed).  Take a pair of pliers, tweezers and remove stained tape that causes all the problems.  Problem is fixed at 100%. I do not understand why why so many people are so adamant against trying this.  This isn't major surgery.  You literally pop open the display (no screws or anything necessary), and you take a pair of tweezers and pluck a piece of thin ribbon.  That's all.  The unit will work perfectly without additional software or hardware changes.

  This is a great how-to with a video: How to remove the color ribbon

  How do with images on the other: How-to's

  Note that you can do both.  #2 solution will fix the problem of obscurity.  #1 sOlution will give you more controls.  My suggestion is to carry out the withdrawal from the Strip to solve the problem of dark camera, and then install the driver of HP to give you even more control camera.

  UNLESS YOU HAVE A NEWER SOLUTION, MORE INNOVATIVE TO THE PROBLEM, PLEASE DO NOT POST THE SAME THING MORE AND MORE ONLY SAYING ILS ARE A NEW SOLUTION.

  Message edited by SchnellFowVay on 02/17/2009 09:31