HP MINI 110-1030NR: HP MINI 110

Trying to a password reset for the bios.

Any help would be appreciated

s/n(Personal information removed by Moderator)

Concerning

Daniel

Ask to try.

e9lo7ug277

3rd letter tiny L.

4th letter lowercase O.

Use this code to go into the BIOS.

Disable all passwords that are enabled.

If requested the CURRENT password using this code.

Request NEW password just press ENTER.

If asked to hit just to CHECK password to enter.

Save and exit.

REO

I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

Tags: Notebooks

Similar Questions

  • HP mini 110-1030nr: password reset

    Hello, I tried to use my old hp mini and can't remember the password. I get the following code after three attempts: CNU925694Z

    Any help to reset is appreciated.

    Thank you

    Matt

    Hello:

    Please read the first post on the link below, which should solve your dilemma.

    http://h30434.www3.HP.com/T5/notebook-operating-Sy...

  • HP Mini 110-1030NR restore factory

    Hello

    I have a HP Mini, which runs very slowly.  I would like to return to the factory settings, but I have problems.  Other links I've read talk about a 'recover Manager' but I don't see it.  If anyone can help, I'd appreciate it.

    Options that have been put at your disposalby HPfor recovery of your mini are on this web document. 

    Do you still have the Windows XP installation disc and application disc that shipped with your mini?

    Had considered using the Windows system restore?

  • HP Mini 110-1030NR - how to reset the bios password

    My laptop was sitting around and I for got password for Bios, Hp Mini 1000, model 1137NR

    Password check failed

    Fatal error... System stopped.

    CNU9242NQG

    Please help how to get in and remove it or change...

    Try this:

    e9lo7v795h

  • HP Mini 110-1030NR: password power

    My brother password protected the boot CNU9214KPX

    At the password prompt try e9lo73vs24 or e9lo73vs2r

  • HP mini 110 - 1030nr bios, lockout,

    code CNU9225R4v can someone help please!

    Try Laure.

    e9lo77qbv6

    Third letter lowercase l.

    REO

    I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

  • HP mini 110 computer: enter the current password

    Hello! I have a problem with my computer hp mini 110. It asks me to enter the current password and I entered all the possible passwords that I could remember... The p/n is:-VA714UA #ABA. Model number: HP mini 110-1030NR. What should I do?

  • HP Mini 110-3100

    HP Mini 110-3100

    When the power up, download the HP logo, and then a blank screen with cursor blinking the upper left corner.

    A ran diagnostic - everything going.

    Can not enter the system recovery

    Cannot enter Safe Mode

    I get in the utility of configuration but nothing that solves the problem.

    I get in system information, but again, nothing to fix this start.

    Estimates in the stores for difficulty of course the beginning at least $110 - could be higher

    However, Amazon sells HP Mini 110-1030NR for $110

    Issues related to the:

    1. any idea on how I can get back to exploit the HP MIni 110-3100 I?

    2. What are the differences between the 110-3100 against 110-1030NR

    3 if I decide to buy the - 1030NR instead of having the 3 100 repaired, an idea on what I give up and ALSO, what does NR stand for?

    Thank you.

    Thank you for responding. I'm sorry to hear that it's really broken. I don't know that a brand new computer would be a nice touch after doing all this work.

    If I provided useful information, please mark one of my posts with an acceptable Solution to help other users who may need this information, in the future!

    Please let me know if you have any questions or concerns. Thank you!

    Mario

  • HP mini 110 computer: forgotten password

    Hi my hp mini 110-1030NR as password I forgot it please can you help me

    System: CNU9280C6K

    Hello

    Enter: e9lo7u1egs (3rd character is a lowercase L)

    Kind regards

    DP - K

  • the Mini 110 bios password recovery

    Hi, I need a password for my mini 110 1030nr. Error code cnu9246cpq. Can someone help me please. Thank you

    Hello

    Please be aware that this is not supported by HP and try your hand at your own risk.

    Try to enter: e9lo7vge25 (to be noted that the 3rd character is a lowercase L)

    Kind regards

    DP - K

  • HP mini 110-1110SA: HP mini 110-1110SA locked

    I try to repair my old HP mini 110-1110SA but it has a bios lock and I forgot the password AND ALL 3 TIMES I TRY A word PAST IT FROZEN. BTW, my mini HP serial number is CNU93954WV. He showed me a screen blank and it says enter the current password in the center of the screen.

    Please try-

    e9lofoqvd6

    Hope this helps, for other queries in response to the post and feel free to join us again

    * Click on the button white Thumbs Up on the right of say thank you*.

    Make it easier for others to find solutions by checking a response 'accept as Solution' if it solves your problem.

    Thank you

    GBL84

    I'm not an employee of HP

  • HP Mini 110 (XP) - no sound after reinstallation

    Hello! I have a problem after reinstalling my HP Mini 110 and would appreciatte any comment on that.

    I formatted the pc and installed a new version of XP Home edition (SP2).
    Everything went very smooth and all the drivers where installed (downloaded from the HP driver support site).

    Video, network, Intel Wifi chipset, Bios, everything works like a charm... expect for AUDIO.

    I installed the driver IDT, but at the start of the installation it says something in the sense of "your audio device is not supported by this installer" and stops.

    I tried with several different drivers (all from HP site) with no luck.

    Another thing that caught my attention, it's that there is no audio device in the "material management" tab of the system... No sound card is detected! It seems really weird to me...

    What could be the problem? Clues? I must point out that the format of the sound card worked perfectly.

    My computer is a HP Mini 110 (LA 1020).

    $ 1 million for any feedback thanks!

    Ale_Argentina.

    Well Finally I solved it. !!

    The thing is simple... As soon as I installed SP3, the material was detected and drivers accepted without problem.

    Storms XP SP2 will NOT work with the IDT audio device. Just updated to SP3 and immediately the sound card started working.

    Thank you Paul for your entry in the last few posts.

    See you soon!

    Ale_Argentina

  • HP Compaq mini 110 c-1010ER: Connector for SIM card in the laptop

    My friend gave me a Compaq mini 110 c-1010ER. Looking at, I found the connector for the SIM card. I inserted the SIM card, but the system does not detect. Please help to run it.

    I tried, but on Windows 8.1. I install Windows XP and try it.

  • Compaq Mini 110: Polarity of power supply jack

    Hello

    I have a HP/Compaq Mini 110 that was given to me because both the battery and the AC adapter was lost. I have a power supply of the correct voltage (19 VDC) and can get an outlet of the right size. I need to know what the polarity of the plug must be, for example, is the center of the end positive or negative? I also need to know if the computer will be also powered if one battery (even dead) is not installed. If it will power-up with the polarity a/c adapter, I'm going to buy a battery, otherwise I don't lose money. Shame on HP/Compaq to not show a pictorial of polarity on the camera body. If I can get going, have enough moxie upgrade to Windows 10? Thank you.

    Here is the Service Manual:

    Manual

    See p. 54 on the hard drive. She straight plug the motherboard, but it shows a cart or make sledding which does not move there and the SSD is welded to a SATA connector. For some time I took one of these apart.

    He's a regular SATA and the size limit, it's what is on the market, not the hardware, so you could theoretically install a 2 TB or a 2.5 inch SATA SSD. You could probably get one inch 80 gig SATA SSD 2.5 for a pittance and it would run as well as he is capable of running.

    The memory you have is DDR2-800, but the system he clocks up to speed DDR2-533.

    The power Jack is soldered to the motherboard and there is no way I know to stretch upward. A lot of youtube videos on the welding on a new jack and you can find the plug for a few dollars. It is not a work that I do, but I saw several times and I think you can probably manage it if you have the soldering equipment.

    If this has answered your questions please make it easier for others to find by marking "accept as a Solution.

  • HP mini 110 OS re - install

    I have a HP netbook mini 110. He lost his Windows XP, even if the HP operating system works. I hope that I can download the full HP and Windows operating systems.

    The following URL is a link to download the ISO Windows Home Starter.

    http://getintopc.com/wp-content/uploads/2013/07/new-download-button.PNG

Maybe you are looking for

  • iMessage problem with display left column

    I'm under EC 10.11.1.  Recently iMessage started behaving wonky.  Normally I have the spectacle of the left column of all information (name, phone number and a photo) of a person I communicate regularly with.  For reasons that I am unclear on the sub

  • HP USB Flash Drive & Mac

    I bought two HP Flash DRIVE v125w 4 GB from Staples today, October 14, 2009.   It says on the packaging of return that it is compatible Windows and Mac, Mac OS: 10.3 or later.  I use Mac OS 10.5 on my laptop and Mac OS 10.6 on my Mac Mini. It does no

  • cRIO 9014, FPGA compiler error

    I use cRIO 9014, that while the FPGA code compilation I get attached error. Please guide me ob who...

  • Media Player 11

    Plays media requests that I have work online but I'm online and my default player is windows 11. player still does not connect online services.

  • Port of native queue, the AA and the voice call

    Hi all Recently, I met a challenge problem, the customer got a busy tone when they called the number of hunting. We have AA 9 connection of the unit-based, we also have the queue of the native call (Hunt). When the client calls the DID number that we