HP Mini 110-3600 sd screen problem

Hi all

I have a problem with the screen of my HP Mini 110-3600 sd (product code LD078EA #ABH). Yesterday morning all of a sudden it became too small for the content, which means that the bottom was not visible (for example windows, I use windows 7 starter edition). To be clear, that the full screen doesn't work, if I maximize the view, it's actually too short. The night before, it was working fine and I did not install anything until I turned it off.

I tried to install the new drivers and using the different resolution but nothing seems to work. What I find strange is that when I look at op the specs of this laptop it says it works at 1024 x 600, but the pc is recommended to run in 1024 x 768 60 Hz. (The screen has never been replaced) The laptop seems to be confused about her size and position, if I chose a resolution '1024 x 600' and 'centre screen' it looks like the screen space, but he put a black in the top column, so that in the end, she always falls short. And, although I'm not sure about this, I thought the laptop used to support a higher resolution, before this problem (1360 x 768 perhaps?).

Below, I've included a story on the monitor (or pilot), if more info is needed I would bring him a pleasure (but I'm not experienced enough to know what you guys should be now).

Intel(r) Graphics Media Accelerator Driver for Mobile report

Report date: 31/08/2013
Report time [hr:mm:ss]: 16:18:43
Driver version: 8.14.10.2230
Operating system: Windows 7 Starter *, Service Pack 1 (6.1.7601)
Default language: Dutch
DirectX version *: 11.0
Physical memory: 1011 MB
Minimum graphics memory: 8 MB
Maximum graphics memory: 249 MB
Used graphics memory: 93 MB
Processor: x 86 family 6 Model 28 Stepping 10
Processor speed: 1662 MHZ
Vendor ID: 8086
Device ID: A011
Review of the unit: 00

* Accelerator information *.

Accelerator in use: Intel (r) Graphics Media Accelerator 3150
Video BIOS: 2036.0
Graph current mode: 1024 x 768 True Color (60 Hz)

* The devices connected to the graphics accelerator *.

Active screens: 1

* Laptop *.

Name of the monitor: digital LCD-scherm (1024 x 768 60 Hz)
Display type: digital
Gamma value: 3.54
DDC2 Protocol: support
Maximum Image size: Horizontal: not available
Vertical: Not available
Watch taken Modes supported:
1024 x 768 (60 Hz)
Display Power Management Support:
Standby mode: not supported
Standby mode: not supported
Active off the coast of the Mode: supported
Raw EDID:
00 ff ff ff ff ff ff 00 36 03 00 03 00 00 00 7f
2f of ff 0c 01 03 80 00 00 00 00 a0 00 57 49 9 b 26
10 4f 48 00 00 00 01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 64 19 00 40 41 00 26 30 18 88
36 00 00 00 00 00 00 18 00 00 00 00 00 3 c 00 fd
EB 07 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 68

* Other names and brands are the property of their respective owners.

I really hope you can help me, because I am abroad and need the laptop to support my study.

Thank you

I see. Thanks for letting me know that. I see some other posts on this thread that mention check video cable as it passes through the hinges. It is a common problem for all laptop computers with cables video/camera/wireless antenna through the hinges.

Here's your Guide to Service and Maintenance. Display Assembly removal starts on page 61.

Tags: Notebooks

Similar Questions

  • HP Mini 110-3610se recovery Partition problem

    Dear HP technical team

    Hello. I have a mini laptop ' hp mini 110-3610se "and when I try to create a new partition in the c drive, I get an error and I can not do so get help from software"paragon partition manager"and I change my recovery to the logic partition and then do some activity by this soft ware and after restart my computer windows cannot start and I can not too F11 recovery and now I don't have windows and I don't have any recovery tools and system cannot work by recovery option.

    I know that my windows partition not damaged because I change it and I work on the recovery partition but my widows will not start.

    now, I can not access the hp suppurt group, please help and tell me what I can do?

    Make a Paragon partition manager boot disk, boot from it and undo the changes to the partition.

    or try this

    Use F8 to the beginning of the power up when you see the HP splash screen, that you get the advanced screen, select 'repair your computer' and press ENTER, once that loads of Windows recovery environment, select 'repair your computer' once again, if you get a dialog box on it to find problems and you want to repair say no.

    Once you get to the screen tools select Startup Repair, see if he can repair windows startup, restart when it is done, see if it will load windows now.

  • HP Mini 110: Enter current password problem.

    Hi guys, it seems I have the same problem as many others, hp Mini 110 wonder password enter CURRENT: but I have no idea what it is, it seems people have had a response, somone could help me too please?

    The error code is: CNU94116TX

    Thanks a lot to advence

    Steve

    @steevhugs

    E9lov33ga4 enter: (note that in both cases, the 3rd is a lowercase L)

    or
    e9lov33gar

    Kind regards

    DP - K

  • HP mini 110-3000 black screen

    The reset but still xp does not start.

    Just a cursor blinks upper-left with black screen.

    All the test went thru ok and Quick View strives to find

    but I can not for xp.

    Did you run the Diagnoistics to start during the startup (by pressing F2) and run tests of different? If Yes, and the material is very well, I think it would be that the OS is corrupted and you need to reinstall the operating system to use this mini device.

  • HP Mini 110-116NR VP363UA #ABA: HP Mini 110-1116NR CURRENT password problem

    Hello

    A friend gave me a computer recently but could not remember the BIOS password. (The computer has recently received a new hard drive because of the failure of the original). When it starts, it asks a current password. I tried all the passwords I can find here and none have worked.

    Fatal Error Code: CNU93906VN

    Computer: HP 110-116NR p/n: VP363UA #ABA

    Thank you in advance for all you can give me advice.

    Hello

    Password: e9lofo1g69

  • HP mini 110 computer: current password problem

    Hello
    It means enter current password, but I don't know what to type. Idk what your password. Maybe someone could help me?

    CNU9377QB8

    Thank you

    @rappyds

    Enter e9lofxx5pu

    Use this code to go into the BIOS.

    Disable all passwords that are enabled.

    If demand for CURRENT password using this code.

    Request NEW password just press ENTER.

    If asked to hit just to CHECK password to enter.

    Save and exit.

    REO

  • Compaq mini 110: problem of password bios compaq mini 110

    I have compaq mini 110 .my problem bios password is not

    the messsage CNU9249P6X screen?

    WHAT İS THE BİOS PASSWORD? HELP ME THANKS

    Hello

    Enter: e9lo7vo2g4 (to be noted that in both cases, the 3rd character is a lowercase L)

    or
                  e9lo7vo2gr

    Kind regards

    DP - K

  • Problem updating Mini 110-3500 2 GB RAM

    A few days ago, I bought a HP Mini 110-3500 netbook (more precisely a 110-3538TU / LD928PA) and separately, I bought an upgrade to 2 gigabytes of RAM to another bank. So far I had been focused on the problems of screen resolution but tonight, I finally installed the RAM, but the machine could not be started. I tried three times and he has always worked with the original 1gig but never with the upgrade to 2 giga.

    In the store, I noticed that the display Mini 110 used RAM Kingston, so I took care to buy the same brand. I turn the machine on, I brought was not Kingston but RAM Samsung. I have included a picture of two RAM sticks.

    Is - this Mini 110 module is known to work only with certain brands of RAM? I have somehow the wrong type of RAM? I have to change something in the computer so that it can recognize the extra RAM? Is there a brand recommended RAM should I buy instead?

    Unfortunately, I didn't get to try the Kingston RAM on another machine. I tried all my local chain computer stores and MOM & dad computer Chinese import stores and the only other brand available was "Amicroe" resembling a brand generic cheapo, perhaps re-marked. Normal price was AUD $119,96 but Harvey Norman gave me for $60, $5 more that I had paid for the Kingston RAM. I was skeptical, but it was working good in weeks.

  • replacement screen for hp mini 110 1037 ca

    Hello

    Should what screen to spare I order? My netbook has fallen on the ground and the screen is now a task light and color and cracks.

    Running on XP

    REF: VA728UA #ABC

    Purchased at the Canada

    Mini 110 1037 ca model

    Thank you!

    Hello

    You can use the following link to find the part # for your machine:

    http://h20141.www2.HP.com/hpparts/default.aspx?mscssid=E1CEE3C5CD1648DAB189272C32DC53D1 & CC = US & lang = in

    You can also use the following book to check what parts you order because sometimes you want that you have to buy it...:

    http://h10032.www1.HP.com/CTG/manual/c02481106.PDF

    Kind regards.

  • HP mini 110 computer: Enter current password screen appears I forgot my password I need help

    I need help I can not figure out the password on black, enter current password screen can help you please I have a hp mini 110 CNU9453269 please!

    Hello

    Enter e9lovqf7go (3rd character is a lowercase L)

    Kind regards

    DP - K

  • HP mini 110 ethernet controller problem

    Hello I have a HP mini 110, the problem is that my ethernet driver is not install! I'm on windows XP service pack 3, 32-bit. I TRIED INSTALLING THE DRIVERS LISTED ON YOUR SITE BUT IT SAYS AFTER INSTALLATION "CONTROLLER REALTEK M\THE IS NOT FOUND."

    my device remote ID is "PCI/VEN_1969 & DEV_1062 & SUBSYS_308F103C & RV_C0\4 & 23C6FC68 & 0 & 00E1"

    Here is the driver for your network card.

    The device is an Atheros AR8132 PCI - E Fast Ethernet Controller

  • I HAVE COMPAQ MINI 110 HAVE A PROBLEM WITH THE PASSWORD OF PIOS. SYSTEM HAULT CODE IS; CNU9243TDY

    I HAVE COMPAQ MINI 110 HAVE A PROBLEM WITH THE PASSWORD OF PIOS.

    SYSTEM HAULT CODE IS; CNU9243TDY

    ways to help

    Hello

    Try to enter: e9lo7vfati (3rd character is a lowercase L)

    Kind regards

    DP - K

  • WLAN Driver XP problem on HP Mini 110 3504TU

    Hi all

    I have a problem with WLAN driver Windows XP for this Netbook HP Mini 110 3504TU

    "Network controller"?

    Hardware ID:

    PCI\VEN_14E4 & DEV_4727 & SUBSYS_1483103C & REV_01

    PCI\VEN_14E4 & DEV_4727 & SUBSYS_1483103C
    PCI\VEN_14E4 & DEV_4727 & CC_028000
    PCI\VEN_14E4 & DEV_4727 & CC_0280

    Product number: XV876PA #UUF

    SN: {information}

    My Google search results: WiFi chipset is Broadcom. I tried ALL my links (link to the official driver HP) google search result, but just not getting anything,

    I tried anyway install all drivers (search for my googling) downloaded files

    the way normal installation sequence and manual, via the "Update driver" Menu on Device Manager

    but no anymatches found.

    Thanks in advance before...

    Kind regards

    Dave. N

    Hi, Dave:

    This driver should work.

    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-101092-1&prodNameId=3688870&swEnvOID=1093&swLang=13&taskId=135&mode=3

  • HP mini 110: Hp Mini 110-1115CA password problem

    I have a Hp Mini 110-1115CA and I can't remember my password. I have three attempts to enter the password and after the third incorrect attempt, I get this message:

    Password check failed

    Fatal error... System stopped

    CNU94314TL

    Do you know how to fix this? I have my files in my laptop so I need to open it... It is important...

    hope you can help me...

    Hello

    Use the code to reset below

    e9lovf3vak (3rd letter is L)

    Or generate code for reset from the link below

    http://BIOS-PW.org/

    1. Use the posted above unlock code to access the BIOS
    2. Disable all passwords that are enabled
    3. If current password request - type the unlock code
    4. New password, simply press the ENTER key
    5. Repeat the same thing to check the password column.
    6. Then exit the BIOS saving & exit option to save the changes.
  • Compaq mini 110 c-1010et: password Bios Compaq Mini 110 c problem

    Hello. Ask the BIOS password and I do not know the password. Please help me. Model is compaq mini 110 c-1010et and series is [personal information deleted]. Thank you for everything.

    Jimmy

    Try: e9lof1f9u9

    all are lowercase letters
    third letter is small case L
    fourth letter is small case O
    is the sixth number one

    Concerning

    Visruth

Maybe you are looking for