HP mini 110-3000 black screen

Similar Questions

• HP Mini 110-3000: after formatting wifi network icon missing

  Dear Sir.

  I have HP Mini 110-3000. As there is problem in my original preloaded operating system so I formatted and installed windows 7 ultimate 64 bit operating system.

  After formatting, find it me impossible to see the wireless network icon in my tray instead it is another icon that is used to connect to the internet using a LAN cable.

  What is the problem?

  Hello:

  Go to Device Manager and look at the list of devices it.

  Is there a device listed in the Device Manager, labeled as a network controller?

  If so, this is the wireless card that need to install the driver.

  If you don't know which driver you need for the wireless card, please report it to the listed hardware ID of the device that you see as a network controller.

  To find the hardware ID, click the network controller device.

  Then click on the Details tab in the upper part of the window network controller.

  Now you will see a drop-down list of property, and it will be set to the Description of the unit.

  On this list and select the 2nd item (Hardware ID).

  After the first string of characters you see in the window.

• Why my guard for computer laptop hp mini 110 3000 kick start-up repair if I turn it on?

  HP mini 110-3000

  OS: Windows 7 32-bit

  Startup Repair always appears when I turn on my laptop, please help me.

  There are a handful of different reasons that could cause this. Are you shut down the computer properly? This may be due to being badly off the computer.

  Thank you

  Sean

• HP Mini 110-3600 sd screen problem

  Hi all

  I have a problem with the screen of my HP Mini 110-3600 sd (product code LD078EA #ABH). Yesterday morning all of a sudden it became too small for the content, which means that the bottom was not visible (for example windows, I use windows 7 starter edition). To be clear, that the full screen doesn't work, if I maximize the view, it's actually too short. The night before, it was working fine and I did not install anything until I turned it off.

  I tried to install the new drivers and using the different resolution but nothing seems to work. What I find strange is that when I look at op the specs of this laptop it says it works at 1024 x 600, but the pc is recommended to run in 1024 x 768 60 Hz. (The screen has never been replaced) The laptop seems to be confused about her size and position, if I chose a resolution '1024 x 600' and 'centre screen' it looks like the screen space, but he put a black in the top column, so that in the end, she always falls short. And, although I'm not sure about this, I thought the laptop used to support a higher resolution, before this problem (1360 x 768 perhaps?).

  Below, I've included a story on the monitor (or pilot), if more info is needed I would bring him a pleasure (but I'm not experienced enough to know what you guys should be now).

  Intel(r) Graphics Media Accelerator Driver for Mobile report

  Report date: 31/08/2013
  Report time [hr:mm:ss]: 16:18:43
  Driver version: 8.14.10.2230
  Operating system: Windows 7 Starter *, Service Pack 1 (6.1.7601)
  Default language: Dutch
  DirectX version *: 11.0
  Physical memory: 1011 MB
  Minimum graphics memory: 8 MB
  Maximum graphics memory: 249 MB
  Used graphics memory: 93 MB
  Processor: x 86 family 6 Model 28 Stepping 10
  Processor speed: 1662 MHZ
  Vendor ID: 8086
  Device ID: A011
  Review of the unit: 00

  * Accelerator information *.

  Accelerator in use: Intel (r) Graphics Media Accelerator 3150
  Video BIOS: 2036.0
  Graph current mode: 1024 x 768 True Color (60 Hz)

  * The devices connected to the graphics accelerator *.

  Active screens: 1

  * Laptop *.

  Name of the monitor: digital LCD-scherm (1024 x 768 60 Hz)
  Display type: digital
  Gamma value: 3.54
  DDC2 Protocol: support
  Maximum Image size: Horizontal: not available
  Vertical: Not available
  Watch taken Modes supported:
  1024 x 768 (60 Hz)
  Display Power Management Support:
  Standby mode: not supported
  Standby mode: not supported
  Active off the coast of the Mode: supported
  Raw EDID:
  00 ff ff ff ff ff ff 00 36 03 00 03 00 00 00 7f
  2f of ff 0c 01 03 80 00 00 00 00 a0 00 57 49 9 b 26
  10 4f 48 00 00 00 01 01 01 01 01 01 01 01 01 01
  01 01 01 01 01 01 64 19 00 40 41 00 26 30 18 88
  36 00 00 00 00 00 00 18 00 00 00 00 00 3 c 00 fd
  EB 07 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 68

  * Other names and brands are the property of their respective owners.

  I really hope you can help me, because I am abroad and need the laptop to support my study.

  Thank you

  I see. Thanks for letting me know that. I see some other posts on this thread that mention check video cable as it passes through the hinges. It is a common problem for all laptop computers with cables video/camera/wireless antenna through the hinges.

  Here's your Guide to Service and Maintenance. Display Assembly removal starts on page 61.

• Dv7t-3000 Black Screen after that the Bios flash (Bios CORRECT) what are my options?

  Hi, I have a dv7t-3000 and recently, I installed windows7 ultimate and so I started to install all my drivers to catch up with my laptop. I flashed my bios and the computer went to reboot and installed 76 updates before you stop. I went to bed and woke up and when I turned my count on the screen is BLACK. Without backlight or nothing. Leads to come, wireless is disabled, I hear the fan and do not know if the hard drive does not work. I don't see why it wouldn't. I tried a HARD reset and taking the ram and put it back in. Neither have worked. I even tried to hold the windows key + B when the computer turns on but no luck. Any ideas? Any help would be greatly appreciated.

  Fixed it by resetting CMOS battery. =)

• HP Mini 210 - 1010NR black screen

  Hello

  I have a HP Mini 210 - 1010NR which has recently stopped working. I ran several diagnostic tests. This is a summary of what I've done and found:

  First of all, I did a hard reset of the netbook (with power with no battery). There was no positive outcome. I followed this test by testing the hard drive and ram. To test the hard drive, I plugged into my office and did a disk check. The results showed that the car was functioning properly. To test the ram, I have used DDR2 ram from another netbook I and tested the operation of the broken netbook. It was still broken. Finally, I noticed the caps lock button was flashing on start up. I looked at the result of the error. It flickered once every couple secconds. This meant that it was an error of type 1 (CPU failure). How to test a CPU failure and would it be possible that it is something else the CPU or the caps lock key blinks once every second torque means that there must be a failure of the CPU.

  Thank you

  Hello ems316, welcome to the Forums of HP.

  Thank you to provide detailed information on the already tried troubleshooting.

  Regarding Notebook and question it if it is a failure of the CPU, based what you have described with this document: computer does not start and the lights blink or the computer will beep (which can be the one you found). That would be a problem with the central unit. In line with the recommended best option would contact support to see what repair and replacement options are available.

  I'm sorry for the incontinence might cause.
  Thanks for posting on the HP Forums.

• Mac mini black screen after upgrading to sierra

  Hello!

  My probleme:Mac Mini end 2014 black screen to start immediately after the upgrade of Sierra.

  Thanks for your help.

  Kentr0n

  Is there anything on the black screen (boot) at all ever?

• HP MINI 110-3130NR RAM UPGRADE

  Hi, I just bought the HP MINI 110-3130NR and want to upgrade the ram.  The problem is, there is no access panel like the videos show.  The background is completely smooth and without access to the battery that slides to the rear of the compartment.  Stands in the background?  If so, are the screws under the little rubber feet?  Are they pop out?  I'm puzzled.

  Here is the Service guide and maintaince, http://h10032.www1.hp.com/ctg/Manual/c02481106.pdf check page 40

  Who have the info on how to remove the access door on HP mini 110-3000... and yes the bottom comes off... There are no screws, it just simple latch slide (Orange color), it takes to remove the bottom...

• HP mini 110 computer: enter the password black screen

  Wend I start the laptop, I get a black screen with enter the password and after 3 times that I get

  fatal error... sysstem interrupted

  cnu9235l6m

  Hello

  Enter: e9lo7fqkg4 (3rd character is a lowercase L)

  Kind regards

  DP - K

• HP mini 110 computer: Enter current password screen appears I forgot my password I need help

  I need help I can not figure out the password on black, enter current password screen can help you please I have a hp mini 110 CNU9453269 please!

  Hello

  Enter e9lovqf7go (3rd character is a lowercase L)

  Kind regards

  DP - K

• Re: NB200-110 can not boot - black screen

  Hi all!

  I have a toshiba nb200-110 semi-bricked: can I power on it, I can surf via the bios, I can pass any setting but I can't start!

  Indeed, after the bios, I have black screen.
  If I try to go to the boot menu (f12) I always black screen! What can I do? BIOS version is 1.20.

  I have created a disk of crysis with the latest bios (2.10), it seems flahs porperly but upon restarting, I always BIOS 1.20

  sSorry for my bad English

  PS I KNOW THAT THEY HAVE RESET THE BIOS WITH THE JUMPER (BECAUSE THEY FORGOT THE PASSWORD).
  BEFORE THIS OPERATION, THE NETBOOK WORKED WITHOUT PROBLEMS!

  Hello

  You speak for themselves
  What these say that the laptop was already send to ASP?

  Have you checked if the video output was not set to external monitor?
  Please check if the FN + F5 keys that toggle between internal and external monitor.

  If it does not then I would recommend contacting ASP guy that removed the BIOS password I say everything was ok before the BIOS password has been deleted maybe they changed something in the BIOS or BIOS itself

  I wish you good luck

• replacement screen for hp mini 110 1037 ca

  Hello

  Should what screen to spare I order? My netbook has fallen on the ground and the screen is now a task light and color and cracks.

  Running on XP

  REF: VA728UA #ABC

  Purchased at the Canada

  Mini 110 1037 ca model

  Thank you!

  Hello

  You can use the following link to find the part # for your machine:

  http://h20141.www2.HP.com/hpparts/default.aspx?mscssid=E1CEE3C5CD1648DAB189272C32DC53D1 & CC = US & lang = in

  You can also use the following book to check what parts you order because sometimes you want that you have to buy it...:

  http://h10032.www1.HP.com/CTG/manual/c02481106.PDF

  Kind regards.

• Ipad black screen after updating ios 9.2 2 mini

  Hi all

  My mini ipad 2 was somewhere in the update to ios 9.2 and when I tried to unlock it, it did not.

  I got a black screen, I thought that maybe battery or something.

  After the cable, I hear the sound of connect 'dived', so he is still alive.

  Then every 5-10 seconds who even connect sound repeats.

  So I tried the following:

  -Home and power button, connect to itunes-> restore

  -Home and power button, connect to itunes-> update

  -Home and power button, connect to itunes->-> tried restoring back to 9.1-> causes error 3194

  So, I tried all of the obvious ways to get the ipad back alive again, but I still have a black screen and the sound of connection.

  What to do?

  See the following support article on error 3194. https://support.Apple.com/en-us/HT201442

  -AJ

• Pavilion dv7-6c75eo: 10 start Windows (black screen for about 1 min.)

  Windows 7 (System. org) was running fast and good.

  Updated to 10 and after a few reboots, it has been installed and working.

  whenever I start cold blue windows logo appears and the device goes into screen black.

  It remains so for at least 1 minute and then the login screen appears. All the drivers are updated day/install.

  I tried to do a clean 10 x 64 Windows and installed well installation and rebooted.

  This time it was much faster (a few seconds) and I went into the Device Manager.

  I could see that Windows installed the drivers for various devices like the unknown devices disappeared one by one.

  Some time after (with 1 remaining peripheral unknown not related to the problem) it restarts.

  Now I'm on the black screen again whenever I restart.

  I hope that the description of this issue is understandable

  I've updated the hard drive on a disk of 120 GB and second disk SSD Intel with a disk of 1000 GB new

  Data sheet:

  CPU: i7 [email protected]

  RAM: 8 GB DDR 665 MHz (9-9-9-24)

  MB: HP 1803

  Graphics card: Intel HD Graphics 3000 + ATI Radeo HD 6700 M

  Storage: INTEL SSDSA2CW120G3 (SSD) + Hitachi-HGST HTS541010A9E680 (SATA)

  Audio: IDT HD Audio

  Windows Pro 64-bit 10

  Temperatures: CPU: 49-51/degr. Motherboard: 51-52/degr. storage: 32 degrees.

  I hope someone can get some ideas

  PS. : I'm not a newb

  The solution is either:
  ¤ Accept the loooooong delay
  ¤ Do not upgrade for Windows 10

• Black screen appears 2-3 min long on Satellite L850-F313

  I have problem with my laptop Satellite L850-F313, when I start my laptop computer, a black screen comes after Windows Welcome I see a black screen for 2 or 3 minutes until the desktop is displayed.

  I thought that the black screen comes from Microsoft issue but when I contacted them they told me that I have to check with Toshiba because this problem can be solved by Toshiba.

  Could you please help me?

  Could connect you an external monitor to the laptop and you could check if something would be seen on the external monitor?

  You said that after short time (2 / 3 minutes) the office would appear... Well, for me, it means that the system needs time to complete the start-up procedure.

  Without doubt, the question relates only to some of the problems of the system and so I might recommend to a Toshiba recovery procedure and to check the laptop functionality using the recovered expenses system.

  I don't know what windows system was preinstalled on this laptop, but usually you can use the recovery media created clean in order to start the recovery process, or you can use the recovery of HARD drive... process details should be described in the laptop user manual.