HP Mini 110: HP Mini 110 Wont load disc?

Similar Questions

• Satellite click Mini L9W - B: loading new problem?

  Hi all

  I have some serious looking problems with my mini load click again (6 weeks) satellite.
  It seems to be a new addition to an already long list, but I had a glance at previous posts and has not found the same problem.

  The battery ran out a week ago and I've only connected last night to load all night (I was on vacation). This morning I tried to start and he won start t at all. The only thing it shows every 10 to 20 seconds (without touching the device) is the loading screen. I believe in the screen both batteries are empty, but the Tablet battery charge (now for 5 hours without a change in status). He still won t start when you press the power button.

  Someone had a similar problem? If my battery is just very deeply and patience will solve the problem? Other recommendations?

  The BIOS is upgraded to 1.7 since I had other questions charge described at the beginning and it seems to have fixed those at least.

  To be honest, I'm a bit fed up with it. I love really all the benefits of the device (size, detachment of the Tablet, connection USB etc.), but the list of problems is really a bit long

  I hope someone can help me. Thanks in advance.

  SAS

  I hope you solved this. I had the same thing. The problem seems to be that the unit is on and there is no enough power via mini usb to run and charge the batteries at the same time.

  The solution was to press the power button for 15 seconds to ensure a forced switch off then let it charge and check after a few hours of a short touch on the power button, is not enough to start. I hope you can see some charge in the battery of the screen.

• Satellite click on Mini L9W-B-loading the battery/questions

  Hello

  I just got my Satelite click Mini a few days ago, and there seems to be a problem with the battery in the keyboard.

  When I got the laptop I have completely loaded him and everything was fine. I have often used the laptop and I noticed today that the main battery had fallen to 3%. I assumed that the power would return to the 2nd battery but it didn't and firm. Then I rebooted and powered it however the charge seemed to stall at about 40%.

  After checking the forums I thought that an update of the bios (at 1.7) it would solve however there no and other issues have marked up. The first battery charge very slowly and seems to stall at 70% the second battery is showing zero percent (before the update it is 100%), it indicates also that its plugged in and not charging.

  In addition, and I don't know if it's related, but I found it very hard to type in this forum that the screen is blinking and I have to wait after pressing each key. I had this post on another laptop.

  Any help would be appreciated, I'm afraid that this laptop has to return to the factory.

  Thank you very much

  Richard Waldman

  After checking the forums I thought that an update of the bios (at 1.7) it would solve however there no and other issues have marked up. The first battery charge very slowly and seems to stall at 70% the second battery is showing zero percent (before the update it is 100%), it indicates also that its plugged in and not charging.

  As far as I know that the BIOS v1.7 has solved the problem with the keyboard dock charger status which was not recognized by the system of window correctly.
  You said that before updating the status of the battery was 100%. He was wrong.

  You should also know that the battery
  #1 refers inside the Tablet and the battery
  #2 refers to the battery in the keyboard docking station.
  The battery status can be checked in the Windows Mobility Center window.

  When you use the tablet with the keyboard dock, the second battery (battery inside the keyboard docking station) is the first source to power!

  If you use the keyboard for the first time, it might be possible that the battery is deeply discharged and the need to maintain the Tablet and keyboard dock to recharge for at least 24 hours.
  The tablet should be connected to the power adapter and moored at the keyboard docking station.

• Mac Mini crashes when loading

  When I boot my mac mini (apple over a progress bar logo) loading screen lights up. The progress bar fills to about 75%, then the screen flickers and the loading bar turns a thin bar with rounded edges and a border to a thick white bar (3 or 4 thicker x) without border and square edges. There seems to be no progress from there.

  I did the following to try to remedy:

  • Run the utility on the drive repar
  • Run fsck - fy in single-user mode
  • Reset the NVRAM
  • Reset the SMC

  It does not load in safe mode, freezes on the loading bar (I left a lot of time to make sure that it was not just slow).

  Does anyone have experience of this and know how to fix?

  Repair disk ended?

  If so, then reinstall the OSX. Nothing shall be lost

  How to reinstall OS X on your Mac - Apple Support

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  Format the boot disk and then do a fresh install of Mac OS x

• IPhone 5 s Wont load into the wall sockets?

  My Iphone 5s does not load in the inlet but works perfectly when connected to a USB port on my computer?

  But, I recently visited my parents House and it worked not in the wall socket with the exact same USB and the plug?

  No outlets in my work from home...

  You must visit an Apple retail store or Apple authorized service provider, take your adapter and USB cable with you as well and ask them to connect or to check the card.

  Find an Apple authorized service provider

• Vista Service Pack 2 restarts and wont load my computer!

  I downloaded the Service Pack 2 of Vista on my HP laptop and when he arrived at stage 3 the computer keeps restarting and won't load. He remains at 0% and restarts. Nothing works I even tried to reboot in safe mode! Please someone help!

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• HP psc 2510 photosmart completely software wont load in step 4/4 96%, it freezes

  I am running Windows Vista on a Compaq Presario with updates to date.

  Since the restoration of the pc the software does not completely.

  I downloaded the latest version of the software and tried without success. He comes to step 4/4 96% and then freezes. An error message appears but disappears to quickley to read. He can't fax set up.

  It loads on a laptop without problem.

  OLDBRP,

  I suggest you contact our technical support at the 800-474-6836 to see how up-to-date the options they have available. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

  Thank you

• I have office 2003 & now a new mini-computer with entry disc... can I download office 2003 online if I code havemy

  help you have alink I can go?

  How to install MS Office on a netbook:

  1. from a computer with an optical drive, insert the Office CD in the drive. If Office Setup starts, exit/cancel out of it. Now, double-click on my computer and see your optical drive icon. Right click and choose 'open '. You will get a window showing the contents of the Office CD. Just it away or reduce it at the moment.

  2. right click on an empty area of your desktop and choose new > folder to create a new folder. Name it something like "Install Office". Double-click the new folder to open it. Display the window of the Office CD. Now you have two windows open - one for the office installation folder and one for the Office CD.

  3. in the window Office CD, Ctrl + A to select all. Drag to the open window of the Office installation folder and all the files on the Office CD will be copied to it. Once this is done, close the window of the Office CD and remove the CD from the optical drive.

  4. now drag the Office of a USB installation folder. Once the file has been copied on the USB key, remove the Flash DRIVE and bring it in the netbook. Copy the folder Office moved to a location, you will find on your netbook such as your desktop or in your Documents folder.

  4A. you can also copy the installation folder of your netbook on your local network office if you have a file/printer sharing set up between two computers instead of using the USB.

  5. now on the netbook, double-click the office installation folder to open it. You will see the file Setup.exe. Double-click it to start the installation of Office. MS - MVP - Elephant Boy computers - don't panic!

• Does not load disc

  When I insert a disc, label to me, I hear it go, but it does not appear on my desktop or the finder. Halp!

  Another source of help (if you have not already done).

  Go to your operating system's Help Menu.  In the search box, type dvd

  Click all topics & bandages that relate to your problem troubleshooting.

  You can also do the same in disk utility.  Open same.

  In the lower-left corner of the window, click the purple w / the "?" in the middle.

  This will bring up the Help Menu.

  ===============

  Try a different brand.  Top favorites of the forum page

  CDs

  FUJI

  TDK

  In extenso

  DVD

  Maxell

  In extenso

  ==============

  Apple Disc burning Quick Assist

  Make sure that DVDs are not dirty, dirty or scratched.

  http://support.Apple.com/kb/TS2000 Mac don't dΘmarre the installation disc

  http://support.Apple.com/kb/HT2801 Apple computers: Troubleshooting the SuperDrive slot-loading

  * Your disc may need cleaning.  Cleaning kits can be purchased at any store that sells CD/DVDs. ***

  

• Windows Vista won't load disc

  Windows Vista 64 bit frozen and would not.  After reading the book has decided that I should restore disk factory.  Press F12 by following the instructions (I did all the retore point Jules Destrooper, no go).  After hitting F12 it says press F1, set thinking it would reformat the disk drive.  Instead it loaded Vista and it works.  Now, whenever I start the computer it shows the line F1 and I have to insert the disc to load.  What happened.

  Hello

  ·         Which version of Windows Vista you are using?

  ·         What is the brand and model of the computer?

  Regarding the recovery DVDs that you get F1 option before you start, you can try to contact your OEM (manufacturer, i.e.) for assistance.

  I hope this helps.

• Error-Windows won't load disc playback

  Monday my computer worked fine in the morning, and then I drove 5 hours back to school and when I tried to turn on the computer I got a disc «read error press Ctrl + alt + delete to restart»

  Today, I burned a copy of the disc on a Vista recovery cd and booted from there and ran a repair.

  I then also followed instructions from a forum here that says that OS was not when he ran the repair. Who cleared up the problem of disk error.

  However, now my computer still load windows. It retains a windows error recovery screen loading and I get the options to start in safe mode, normal, or last known working scene and I did all the people and they are trying to run and then the computer stops and restarts.

  I was wondering if anyone has any ideas, I'm running on the recovery disk again now to see if my operating system can be found.

  About 3 weeks ago, the hard drive that came with the computer crashed and we ordered a new one. It seems unlikely that the hard drive could fail in such a short period of time.

  I am running Windows Vista Home Premium 32 bit on my Dell Inspiron 1525.

  CHANGE 1217 CSE

  I am running the recovery disc and my screen is to System Recovery Options, and it always seems that my OS will be not registered.

  When I run windows in safe mode, it says LOADING of FILES of WINDOWS and he gets as much as

  \Windows\systems32\drivers\crcdisk.sys

  Hello

  The above error message indicates that it is not to find your operating system (Windows).
  This could be because the hard drive is physically wrong or because Windows is incredibly corrupt. Since you're not savvy computer, take the machine to a competent local computer technology.
  Do not use a type of BigComputerStore/GeekSquad of the place. Or if the machine is still under warranty, call the manufacturer's technical support.

  It will be useful.

• I can not load disc Solutions Canon or Turbo Tax DVD. Can't see the exe files.

  Records show but no exe file.  I was able to load another DVD, and he showed an exe file.

  It works fine in xp.

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  They will help you with your question in Forum Vista programs at the above address.

  See you soon.

  Mick Murphy - Microsoft partner

• Independent of the change to load disc

  Hello world.

  I want to know if there is something that I must take into consideration before changing a disc independent mode-dependent in a vSphere 5.1.

  I have 3 drives:

  c: scsi0:0

  d: independent scsi1:0

  independent e:SCSI1:1

  It's because I want to make a backup with HP Data protector, but the backup fails because the "d" drive is 'e' are independent.

  Thank you.

  You should be able to change the mode of the virtual disk without problems with the virtual machine off. The change should not affect the comments system at all.

  André

• With the help of Photoshop CS6 on Yosemite with a Cintiqt and get crashes when I go to save. A way to solve this problem? Only the updates seem to come from CC and I am the last of people loading discs.

  Well, my last computer was destroyed when the son of a friend seeps water so I am rocking a brand new Macbook Pro. Unfortunately, this means that I have to use Yosemite. I am a cartoonist and I draw in Photoshop using a Cintiq. I indeed get bugs like not being able to use some keyboard shortcuts, or by using the zoom or the lasso. But the important thing is that Photoshop crashes when I go to save the work for the first time. No idea how to solve this problem?

  Install the MacOS 10.10.1 update to fix the crash bugs generalized in the open and save dialog boxes.

  And make sure you have the plugin WhiteWindowWorkaround installed in CS6 (no not necessary in 2014 CC) to work around some of the well-known MacOS issues.

• Mini satellite click - this is a support forum, because I see no answers

  I have just as many problems for the mini click and no member of support have responded... Too bad, not professional.

  I create a sort of summary of the related problems that many users of Mini click met until today:

  1. return 5 mpx camera does not work after upgrade to windows 10

  2. all Toshiba lost applications and can be downloaded from the website of Toshiba (like TruCapture) even for windows 10 drivers.

  3 is listed as machine 64 bit in many sites like the one I bought, but Toshiba has yet to release the new firmware that
  will allow to install 64-bit windows like click 10 (you almost ready firmware).

  4 F2 or F12 (FN + S and FN + N) buttons not working if I need to get into the bios and also to turn on the wifi module.

  5 super slow to load. Toshiba Mini click will load faster by using a charger 20W?

  I hope that someone to answer the decision-making support. The worst that you in fact regret (that you bought a product) product is the lack of after sales support.

  Toshiba has the use of support provided in the user manual.
  Regarding win 10 what it's updates.

  I've had adjustments calling mine 8. Microsoft has a site like free Intel manual update.
  The real way to fix it is with patience and perseverance. Keep Googling each perimeter search imaginable.

  Win 10 is a Microsoft product then maybe use Bing here. It is probably not the manufacturer.
  Read the comments that others have problems as well. When you get things squared away (and you).
  You will reflect the trip as being an effort worth it.