Independent of the change to load disc

Similar Questions

• HP Premium C410A cannot load the printer drivers eith disc or download

  HI, I moved the printer to a different computer and on this computer (Windows 7 64-bit) I can't load the drivers of each disk or online.   When going through the installation process as it gets to checking for updates, download updates, and once he starts to install updates it is just out of the whole installation with no message or another - the installation of the whole disappears.

  I have disabnles anti virus, tried down loading the drivers online, but it won't load at all.

  Internet connection is a bit slow but otherwise the whole machine seems to be in working condition, including printers.

  look forward to your responses.

  Thank you

  GB

  Hello

  Restart once the installation and follow the steps until the license agreement.

  Click on the 2nd (using the Internet) lnk and select No, thank you to both of the questions.

  Confirm the changes, accept the license agreement and follow the installation.

  You can see any difference?

• How to change the programs that load when Windows starts

  In simple terms... How to change the programs that load when Windows starts?  Because my boot time is slow in arriving at my login screen!

  Download and run the "Autoruns" from Microsoft Sysinternals freeware:

  < http://technet.microsoft.com/en-us/sysinternals/bb963902="">

  It lists all programs that start at startup and allows you to disable it by simply removing a check mark.  This makes it easy to reverse in case something goes wrong.

  HTH,
  JW

• How to change the color of the indicator of loading the default page?

  Hello

  I was wondering how to change the color of the indicator as shown in the photo below, the default page loading

  http://1drv.Ms/1kivj05

  I use Jdeveloper 11 GR 2 11.1.2.4 & Weblogic 10.3.6

  Best regards.

  Hello

  This will guide you to what you need to do.

  http://www.Oracle.com/technetwork/developer-tools/ADF/learnmore/15-custom-splash-screen-169144.PDF

  As Timo says you will need to locate the gift of animation edit and then create a new skin by using the new gif.

  Concerning

• Possible bug? Change the geometry on the hair, the changes are lost when the model is saved, then loaded into fuse again.  Is this a bug?

  When I save the changes to the hair using the tool change the geometry in a file .fuse on the computer.  These changes are lost when I load the model to the fuse.  Is this a bug?

  Saved to disk:

  

  Reloaded in fuse:

  

  Post edited by: Allan Chaney I've included screenshots.

  Thank you much for the details.  I tested it on Windows and Mac and reproduced.  Doesn't seem to be a bug (but not a guarantee).  I've done some characters, recorded their soft-mod-ness very well.  I connected with the engineers for more tests and we will have fixed as soon as possible!

• This is a silly question, but I can't fix it! The icons that appear on my pictures I change them, have disappeared. The only way I can see them is in the grid. How can I get the icons on the miniature pictures of the gallery full loaded?

  This is a silly question, but I can't fix it! The icons that appear on my pictures I change them, have disappeared. The only way I can see them is in the grid.

  How can I get the icons on the miniature pictures of the gallery full loaded? TIA =)

  You probably dragged the thumbnail size film of small size which prevents the display of the badges of Lightroom. Using your mouse, the mouse on the top line of the strip of film and then do slide it supports to increase the size.

• Cannot change or load or build the dimension of infromation

  Impossible to change or load or build the dimension infromation - error message "Could not open file .otn."
  
  Essbase is a similar error .otn when you try to copy an overview.

  The .otn file is a temporary plan generated during a restructuring.
  You must have had a restructuring fail recently.
  I'm in the app/db directory and delete the temporary files to a restructuring - .otn .inn, .pan, (IIRC .dbn and .esn).
  Now run a restructuring again and see if it succeeds, if so, great, if it fails again, research the cause of failure.
  Good luck
  Robert

• Vista SP2 installation failed; stuck in the changes restart/back

  Hello, I ran the Vista SP2 update last night and left the computer to restart. This morning, he is stuck in a cycle and displays only the «...» "Restoration of the changes. Do not restart.

  It will restart only sometimes, but resumed the same screen.

  During part of the restart I tried to enter Safe Mode with no luck, the computer will restart after windows starts.
  I also tried loading with Boot CD, but the restoration of the system shows that the last time SP2 tried to install and will not return to it.
  Menu in the same startup repair shows also nothing wrong with WIndows startup.

  Please inform, I am unable to run any other diagnosis/Cleanup utility and don't know what to do!

  Hello Sam980,

  Welcome to the Microsoft Answers Forum!

  You can try to access the command prompt in the Windows Recovery console and see if can remove Service Pack 2 manually from your computer. Here are the steps to remove Service Pack 2:

  Open an elevated command prompt window.

  Run the following command, depending on the version of the Windows Vista service that you want to uninstall:

  For Windows Vista Service Pack 1:

  C:\temp\Windows6.0-kb936330-x86.exe x:C:\temp

  Note This command assumes that the file Windows6. 0 - KB936330.exe folder is in the C:\Temp folder

  For Windows Vista Service Pack 2:

  C:\temp\Windows6.0-KB948465-nnn.exe x:C:\temp

  In this command, NNN is x 86, x 64, or IA-64. The collapse of this tableauAgrandir this tableNote that this command assumes that the file Windows6. 0-KB948465 - X 86 .exe is located in the C:\Temp folder.

  We must create a sandbox environment before you can proceed to step 4. This allows you to manage safely an untrusted program. To create a sandbox, sandbox type md.

  To remove the Windows Vista service pack, type or copy and paste the following command, depending on the version of the Windows Vista service that you want to uninstall:

  For Windows Vista Service Pack 1

  start /w pkgmgr.exe /m:c:\temp\Windows6.0-KB936330-X86.cab /up s:sandbox

  For Windows Vista Service Pack 2

  start /w pkgmgr.exe /m:c:\temp\Windows6.0-KB948465-NNN.cab /up s:sandbox.

  In this command, NNN is x 86, x 64, or IA-64.

  Once Pkgmgr.exe completed, you are prompted to restart the computer to complete the uninstall.

  If these steps successfully uninstall the service pack of Windows Vista, and this resolves the issue, you are finished. If these steps do not uninstall the service pack of Windows Vista, or if these steps uninstall the service pack but do not resolve your issue, you need to restore the system to a previous state.

  To do this, go to method 3.

  Here is an article that will give you different methods on how to remove Service Pack 2:
  http://support.Microsoft.com/kb/948537

  If this does not work, then you can try to run CHKDSK on your computer.

  Recovery options or Vista disc Command Prompt type:

  chksdsk/f/r

  Try these steps and let us know if it works.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• C0000218 {registry file failure} the regestry cannot load the hive (file)

  I have XP pro. on a Dell computer. Think that children may have picked up a few difficulties. When trying to boot into safe mode, I get "Stop: c0000218 {Registry file honor} the regestry cannot load the hive (file): \SystemRoot\System32\Config\Software or its log or replacing." It is damaged, missing, or not accessible in writing. »

  There is no disk that came with it, but I have anouther computer with the same windows. I tried to find a way to make a BOOT disk but cannot find a way. Is there a way to solve this problem with the windows disc?

  It's a pretty popular mistake these days and sometimes easy to get running, but you also want to figure out how it happened.  I always suspect Symantec/Norton products with this error, but we'll see.

  If you currently or have already had a whole isntalled Symantec/Norton products, what are the names and versions (if you know).

  Other variants are:

  STOP: c0000218 {Registry file failure}
  The registry cannot load the hive (file): \SystemRoot\System32\Config\SECURITY or its log or replacing. It is damaged, missing, or not accessible in writing.

  STOP: c0000218 {Registry file failure}
  The registry cannot load the hive (file): \SystemRoot\System32\Config\SOFTWARE or its log or replacing. It is damaged, missing, or not accessible in writing.

  STOP: c0000218 {Registry file failure}
  The registry cannot load the hive (file): \SystemRoot\System32\Config\SYSTEM or its log or replacing. It is damaged, missing, or not accessible in writing.

  I would start with a chkdsk/r since the recovery CD of Console you make (see below) and please answer a few questions...

  Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

  Please provide additional information on your system:

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Fill in the blank: my system was working fine until this happened: _.

  If the system works, what do you think might have changed since the last time it did not work properly?

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• Windows Vista: windows could not start error. is suspended from the "Microsoft Corporation" loading bar then black screen BIOS not acpi compliant

  After you have installed the driver for the zune hd, I was asked to restart my computer. After the reboot, start froze on a white screen. I've seen this before and it is usually because of some connected usb components. so I manually powered down the Tower, disconnected the cable from zune and restarted. This time a screen saying that windows could not start, "launch Startup Repair tool" was recommended. Select this habit makes the startup hang to the progress bar from Microsoft corporation, then to a completely white screen. Although strangely, once only a blue error screen appears which says that the BIOS is not acpi compatible. I can't restart with F8 to go into safe mode, "windows error recovery" still appears. "Start windows normally"produces the same results as the tool to restart launch system. " I have a drive to upgrade to windows 7 and a windows XP upgrade disk. the disc of windows 7 hangs at "starting windows" and the XP disc gives a blue screen error: stop: 0x0000007B (0xF78D2524, 0c 0000034, 0 x 00000000, 0 x 00000000)

  I think I have a BIOS problem, but I don't know how I could continue dealing with the repair. I have no success update the bios from usb flash. Any idea is appreciated.
  Update: managed to start with F8, choose to boot in safe mode and loading hangs after "load: \windows\system32\drivers\crcdisk.sys"***.
  the machine is a gateway LX6810-01 (friend motherboard)

  Hello

  1. What is the exact error message when Windows Vista does not start?

  2. you have the disk Installation of Windows Vista operating system?

  I suggest you change the mode of RAMA to IDE in the BIOS. You can contact the PC manufacturer for assistance.

  Note: BIOS change / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

   

  In addition, perform a check disk in Windows Recovery Mode.

  (a) Insert the Windows Vista installation disc in the disc drive, and then start the computer.

  (b) press a key when the message "Press any key to boot from CD or DVD".

  (c) select a language, an hour and the currencyand a keyboard or an input method, and then click Next.

  (d) click on check drive for errors.

  (e) in the System Recovery Options dialog box, select the drive of your Windows installation and click Next

  (f) to the System Recovery Options dialog box, click on check Drive for errors.

  (g) use the switch/r to run the disk check.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

   

  It will be useful.

• Cannot set the home page loading Firefox

  My homepage itself, has recently changed although I did not authorize this change. I want to make msn.com, but now it displays bing.com or Options page Virgin Firefox seen after clicking on the "Reset" button on the page.

  I tried to enter the home of the Options page section msn.com and also drag the msn.com tab to the home button on my browser. MSN load when I click on the button Home, but at the start, one of the other pages loads. Once again, I've done zero replaces myself my homepage settings. I would greatly appreciate all advice.

  Thanks in advance.

  Good news! By placing the cursor on the user.js file and take a screenshot of the location, I was able to find the file using my computer, then delete it. Since then, Firefox * seems * to load my homepage provided on each new startup. Therefore, I should be in good shape with regard to this issue.

  Thanks for all the help. Very much appreciated.

• How can I get the changes to the office using the stick to Firefox?

  Have a new computer with Windows 8.1. Put Mozilla by using Internet Explorer. Finally able to turn off the Explorer to avoid their default values, but by default the display of Mozilla understand programs that I don't want. Cannot turn them off. I want to use MyYahoo homepage, and even if the program keeps asking me if I want it to be registered, and my answer is YES, when I close and reopen it goes back to the default values. How can I get what I put to stay put? Thank you.

  You can see the attached screenshot: it's the integrated Firefox 28 homepage. Is this the one that comes up, or something else?

  If the problem is that the homepage integrated returns...

  There are some security/utility programs that cancel the changes made to the settings of your browser. This is to protect you, but obstruction also make changes, you want to do. There are also some malicious programs that will do this.

  (1) check your Windows Control Panel, uninstall a program (or equivalent) to ensure that you don't have what we call research protect. If you find it, delete it. You can also do a few scans of additional malware. See: Firefox troubleshooting problems caused by malware.

  (2) If you have Advanced SystemCare, disable surf Protection feature. Check your security software to something similar like homepage Protection, browser Protection, etc.

  (3) see this article for more information on other known issues: How to fix preferences that will not save.

  If a different page is loading...

  The problem may be caused by an add-on, specifically, an extension. Even if you have not yet installed modules, Firefox will find those that other software had already placed on your system, so it is useful to check.

  Open to the top of the page modules using either:

  • CTRL + SHIFT + a
  • Firefox orange (or the Tools menu) button > Add ons

  In the left column, click Extensions. Then, when in doubt, turn off.

  Typically, a link will appear above at least an extension disabled to restart Firefox. You can complete your work on the tab and click one of the links in the last step.

  Any improvement?

• Only the tab to load once clicked at the opening of the large groups of bookmarks

  I have a folder of bookmarks that contains a few sites I like to visit regularly. When I want to open all of these sites at the same time, I opens the bookmarks folder, scroll to the bottom of the file and click on "Open all in tabs". This opens * and * charge all of the bookmarks contained in this file at the same time.

  I would like to change it then, instead of the opening tabs * and * loading at the same time, they open at the same time but * wait * be clicked before loading.

  The desired behavior can be demonstrated when you restart Firefox with several tabs open, but only the current tab load after reboot, with others waiting in the tab bar to be clicked before loading.

  All advice is appreciated.

  Thank you!

  Technically, you give the browser the command to open several pages at once. I get that you want to make Firefox, but it is currently not possible.

  If you wish, you can use the group your tabs function (http://mzl.la/KrLdDR). In this way, you can just pass grouped tabs display, and then select the tab you want to load individually.

  If Firefox is set to not load the legs up to this that selected, you don't load these tabs in the background. And, you can't have these tabs open in the window at any time.

  Personally, I have seven different groups of handling anywhere between 80 to 130 tabs at any time, so don't load it the tabs until the selected feature really helps me.

  I group of tabs for online shopping, work, social media, YouTube etc.

  I hope this will at least limit the damage for you a bit.

  P.S. I tried to find an add-on to help you with your problem, although I did not find one.

• all the site went "not found HTTP 404 error. The requested resource is not found. "and the"Firefox cannot load Web sites but other programs can"page is not helping

  all the site went "not found HTTP 404 error. The requested resource is not found. "and the"Firefox cannot load Web sites but other programs can"page is not help somehow

  One possible cause is security software (firewall, antivirus) that prevents or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • http://KB.mozillazine.org/Error_loading_websites

  You can try to reset (power off / on) of the router.

• When I use Firefox to watch the changes I make to the HTML files locally, it does not show changes made to images, unless I restart the browser. Is this a bug?

  I have the local and versions at distance of a page is open in two tabs. I change images (keeping the same name in the HTML code) and download the modified image. The tab that displays the remote page does a refresh to show the change. The tab showing the local page of do not. I tried to open it in a new window, but it still doesn't change. Only if I restart Firefox does show the change. Why? Is this a bug?

  Try using Ctrl-Shift-R or Ctrl-F5 to reload the page. This tells Firefox to reload all the content on the page, ignoring cached assets copies.

  I don't know why this is happening in the first place, although I suspect it may have something to do with the fact that the remote copy is loaded from a web server (including a bunch of headers allowing browsers to know when we need to get a new copy of an asset), while the local copy is loaded directly into the file system.