HP Mini 210-1074 resolution

Similar Questions

• Border in black screen HP Mini 210, screen shifted downwards - problem after power outage

  HP Mini 210-1000 actually it's HP Mini 210-1060 EV PC

  Some specifications:

  Display: 25.6 cm (10.1 ") diagonal WSVGA LED HP BrightView Infinity Widescreen Display (1024 x 600) SUBMISSION

  Battery has been dead for a long time.

  My display drivers and BIOS have been recently updated from the HP website.

  After a power failure and a reboot, the screen looks weird. It was moved about an inch down with a black border at the top, on which the mouse won't and the task bar is not visible, as is the bottom of the screen.

  When I go to the screen resolution in Windows by right-clicking on the desktop resolution is set at 1024 x 768, when I click on advanced settings, the monitor tab, monitor is set as a Monitor (1024 x 768 60 Hz) generic Non-PnP.

  When I change to 1024 x 600 it seems blurred and stretched vertically, but the screen is always shifted down with black border on top.

  When I get the Intel graphics settings I can make the same changes as in the dialog Windows (640 x 480, 800 x 600, 1024 x 600, 1024 x 768).

  In image format Options when I select full-screen (non-frontiere) the black border is fixed but always tense vertical screen but the screen is cut down with no visible taskbar.

  Graphics driver reinstalled so that some Type Monitor of windows drivers, nothing changes.

  When I turn on the laptop, the screen HP Quickweb appears also as a 1024 x 600 stretched vertically without black border at the top but will disable the display down.

  It seems that Windows and Hp Quickweb see at 1024 x 768 60 Hz display after the power failure.

  Before that, I had installed Windows updates, but nothing on the display drivers.

  I only got a point system restore leave on earlier that day (very low disk space?) but that did nothing.

  Guess it is a registry/driver issue since no pixel is bad and the black border on top is set in image format Options when I select full-screen (sans-bordure). Any suggestions please?

  Of the information system

  Model: HP Mini 210-1000 actually it's HP Mini 210-1060 EV PC
  Name of the operating system: Microsoft Windows 7 Starter 32-bit
  Version: 6.1.7601 Service Pack 1 Build 7601
  The version of the BIOS/Date: Hewlett-Packard F.24, 18/03/2011

  Display:
  Name: Intel(r) Graphics Media Accelerator 3150
  PNP device ID: PCI VEN_8086 & DEV_A011 & SUBSYS_3660103C & REV_00\3 & 21436425 & 0 & 10
  Adapter type: Intel(r) Graphics Media Accelerator 3150, compatible Intel Corporation

  Name: Intel(r) Graphics Media Accelerator 3150
  ID device PNP PCI VEN_8086 & DEV_A012 & SUBSYS_3660103C & REV_00\3 & 21436425 & 0 & 11
  Compatible adapter Type not available, Intel Corporation

  SOLVED.

  After noticing the OS startup screen/HP resolution looked normal, I just removed the plastic bottom and hit the CMOS battery, after reading this somewhere, because the audio drivers and webcam have been uninstalled too whenever I rebooted the netbook.

  He has not moved even because it was recorded well.

  So I restarted and the resolution has been set.

  Now, can't make the webcam work even though I reinstalled the driver...

• NetBook, HP Mini 210-3000ew vs Windows 8, NEED HELP

  Hello

  I have a few questions. At first sorry for my English, I know it's horrible; D.

  1. I want to install windows on my Hp Mini 210-3000ew netbook 8. For an application on this OS, I need to have the screen resolution 1024 x 768, while my normal screen resolution is 1024 x 600 (recommended by the manufacturer). I can go to regedit and change the 'Display1_DownScalingSupported' value to 1, so I'll be able to adjust my screen resolution of 1024 x 768, but I don't know if this operation won't spoil/break my screen/matrix. What are the chances that my screen/matrix can break down as a result of this operation? Or maybe after a certain period of time to aid higher than the recommended resolution that I will get a few dead pixels or something like that? Is - this windows 8 after changing the present resolution be ok? And can I install it with screen resolution 1024 x 600 or Setup will be out of reach of the screen?

  2. I've been looking for the drivers for windows Web site 8 for Hp Mini 210-3000ew, but I only found drivers for windows 7. They are compatible with windows 8? Or I do not need to install any drivers for my netbook with windows in all 8?

  I am happy for any help. Thanks to advice.

  As far as I know, Windows 7 Starter is an OEM product only and the only source is from the supplier. Microsoft doesn't have a link to download the image.

• HP Mini 210-3000

  I have a HP Mini 210-3000 got my son, it works fine but now the user profile is not recognized at startup and I can't get past the password, the password is accepted, but the message "the service user profile Service has no logon. Failed to load the user profile"I was HP Advanced System Diagnostics and the machine passes all of the Tests such as Start UP, hitches etc.

  The Bios CMU however not to update or restore as update is not available

  How can I fix the user profile so that I can open a session?

  Hello

  You can try the following.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Kind regards

  DP - K

• Power on password for HP Mini 210-1010NR

  I just bought a used HP Mini 210-1010NR on e - bay.  When I turn on the monitor, she prays for power on password or administrator password.  How do past this to use the computer?

  Hello

  Enter: 60780900

  Kind regards

  DP - K

• Mini 210: the mini 210

  Hi guys.
  
  I have a HP mini 210 which I use mainly for internet when they travel, but also for playing iTunes for house music when I execute concerts. Last week the on the key sound turns power on and off remains permanently lit. If I hit him, the o/s tells me that his is switching on and outside, and yet there is no sound on the internal speakers or headphones if I plug them in. Device Manager tells me that the sound is very good, icon audio system looks very happy they control noise. You can see the icon switch between sound off (with the cross inside) and suite. Supposedly I can adjust levels. But no sound, and the orange light on this key remains resolutely. It makes me think that it is not material, but a software problem. All the latest updates are on board.
  
  Met someone with something like that before or have an idea where to find the next?

  See you soon

  KeV

  Hello @kevgl,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I stumbled upon your post on sound level and wanted to help you!

  For starters, can you provide me with the product number of the laptop?  Here is a link that you can use that will help you find your model and product number:
  How can I find my model number or product number?

  In the meantime, have you started having this problem before or after the upgrade to Windows 10?  Try to review the following document and let me know how it goes:

  HP - no sound from speakers (10, 8 Windows) laptops

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Install windows xp in hp mini 210 1010NR, help me please is urgent...

  How can I install windows xp in hp mini 210 1010NR... I tried to install windows xp service pack 3, but I could not, can someone help me please its urgent thank you...

  You need to integrate the drivers Sata ( ICH7M/MDH SATA AHCI ) and burn a new cd XP with nLite.

  Here is a guide showing how to integrate and here are the drivers Sata . 7-ZIP or Universal Extractor are good out of the installer.

• HP mini 210: System disable the code 67207008

  3 incorrect password, System disable code 67207008 HP mini 210. Help

  Hello

  Enter 78165028

  Kind regards

  DP - K

• HP mini 210 computer: network controller driver

  Hi, I need a driver for network controller for my computer hp mini 210. If someone could post a link where I can get it. Help, please!

  Try this one... the one I gave you above might be too new for the revision of the Ralink 5390 a laptop wireless card material.

  This package contains the installation package driver for Ralink Wireless LAN to laptop models controllers that are running a supported operating system.

  File name: sp55715.exe

• HP mini 210-1170NR: not found network controller driver...

  up to what a week ago I was still able to connect to the internet via a wireless connection... so when my friend formated my laptop I could not connect wireless but I can always connect cable... then I tried my laptop what was wrong then I discovered that he was missing the network controller driver...

  What should I do?

  Hello

  The following link has all the requried drivers for your laptop, including wifi drivers, find out wat wireless card is installed on the device, install the respective drivers.

  http://support.HP.com/us-en/drivers/selfservice/HP-mini-210-PC-series/4151684/model/4221571#Z7_3054ICK0KGTE30AQO5O3KA30R1

• HP Mini 210-2080ee recovery media

  Asked me to retrieve a defective HP Mini 210-2080ee with a hard drive.

  I can't source a recovery DVD or USB because the machine was bought in the Middle East and media are not available in Ireland or the United Kingdom.

  Any suggestions welcome

  USB with all the necessary software from Czech Republic delivered by DHL on Wednesday.  Thank you very much for your quick response.

  System in place and works perfectly

• HP Mini 210-2145DX: lost administrator or power on password

  I lost my administrator or power on password to a laptop running Windows 7, don't know if it's a 32 or 64-bit, a HP Mini 210-2145DX.

  Immediately after turning on, it asks, then said, disabled system [50988573].  It is before the Windows splash screen.

  Any help would be MUCH appreciated.

  Thank you!

  KE

  That made me initially, but is it possible to get the password to connect to the home screen?  Thank you!

• HP Mini 210-1100: HP Mini 210 1100 - product Microsoft Windows 7 under "vanity cover" but where is this coverage?

  Hi, I have a laptop of HP Mini old (circa 2010) 210-1100, he is real sweet and small.  Errors at startup, it looks like the drive disappeared.  I would find the product key of Windows 7 and see if I can find the ISO to restore on a new drive, maybe an SSD.  The bottom of the laptop says product key is in the compartment batteries or the cover of the vanity, is not in the battery compartment and I see nothing that matches this coverage "vanity", any ideas. ?

  Cheers, David-SB

  

  @David-SB

  Click on Maintenance and Service Guide.

  http://support.HP.com/ph-en/product/HP-mini-210-1100-PC-series/4151684/manuals

  Start on page 40.

  REO

• Mini 210-1076NR: Mini 210-1076NR lost power on password

  I have a Mini 210-1076NR and we have long forgotten the Bios password.

  I am being welcomed with a enter the administrator password or power on password. I tried every password I can think and it keeps failing.

  After the 3rd attempt failed, I get this code - 64223998

  Any help is greatly appreciated.

  @briandunaway

  Enter 71181318

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• controller Ethernet of HP mini 210-2145. no driver no wifi.

  Hello I have a hp mini 210-2145. He had windows 7 Home Edition 32 bit on it, but I formatted and put windows 7 Professional 64-bit on. I can't get wifi to work. I finally got regular work, but still no wifi. I have went on the pilot site and installed two circuits firmware. and downloaded a bunch of internet drivers on the list of network drivers. After installing a bunch of them, I noticed the scan system. It detected that I had a WLAN 802.11b/g/n. This is TSRI one on the site so I redownloaded and instaled and it still does not work. In Device Manager, it shows the exclamation yellow and says only: ethernet controller. I'm out of ideas. someone else?

  Hello:

  Here is the link to the wireless card driver you need...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107849-1 & CC = US & DLC = in & LC =