Install windows xp in hp mini 210 1010NR, help me please is urgent...

Similar Questions

• Install Windows XP on Hp mini 210-2002ed?

  Hello

  I want to install windows xp on my hp mini 210-2002ed, but it doesent detect my hard drive I heard I need to integrate my driver sata or something, without success

  Can someone help me?

  Hello

  You must include the driver SATA chipset Intel NM10 .

  Information how you do you will find in PDF / doc files that are in the point B of the link below:

  Drivers SATA for XP (solution on BSOD 0x0000007B)

• Power on password for HP Mini 210-1010NR

  I just bought a used HP Mini 210-1010NR on e - bay.  When I turn on the monitor, she prays for power on password or administrator password.  How do past this to use the computer?

  Hello

  Enter: 60780900

  Kind regards

  DP - K

• HP Mini 210 - 1010NR black screen

  Hello

  I have a HP Mini 210 - 1010NR which has recently stopped working. I ran several diagnostic tests. This is a summary of what I've done and found:

  First of all, I did a hard reset of the netbook (with power with no battery). There was no positive outcome. I followed this test by testing the hard drive and ram. To test the hard drive, I plugged into my office and did a disk check. The results showed that the car was functioning properly. To test the ram, I have used DDR2 ram from another netbook I and tested the operation of the broken netbook. It was still broken. Finally, I noticed the caps lock button was flashing on start up. I looked at the result of the error. It flickered once every couple secconds. This meant that it was an error of type 1 (CPU failure). How to test a CPU failure and would it be possible that it is something else the CPU or the caps lock key blinks once every second torque means that there must be a failure of the CPU.

  Thank you

  Hello ems316, welcome to the Forums of HP.

  Thank you to provide detailed information on the already tried troubleshooting.

  Regarding Notebook and question it if it is a failure of the CPU, based what you have described with this document: computer does not start and the lights blink or the computer will beep (which can be the one you found). That would be a problem with the central unit. In line with the recommended best option would contact support to see what repair and replacement options are available.

  I'm sorry for the incontinence might cause.
  Thanks for posting on the HP Forums.

• problem installing windows 7 finishing installation scope and freeze for hours please help

  problem installing windows 7 finishing installation scope and freeze for hours please help

  my pc req:
  2 GB of ram
  NVIDIA geforce 210 1 GB
  180 GB
  Pentium 4 3.40
  Help, please

  Turn off the computer.

  try to start safe mode, start your PC, just before the system loads the Windows operating system. Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. Select Safe Mode.

  Log, click Start, type Device Manager, press ENTER.

  Expand graphics cards

  Right-click your video card, click on uninstall.

  Restart your system

  Log, click Start, type Device Manager, press ENTER.

  Expand graphics cards
  Right-click your video card

  Driver update software; then click search automatically for updated driver.

• can I install windows xp sp3 CPU intel core 2 duo? Please quick reply

  can I install windows xp sp3 CPU intel core 2 duo? Please quick reply

  Yes, you can.

• N5110 wireless DOES NOT WORK AFTER RE INSTALL WINDOWS 7, I NEED THE DRIVER without THREAD SPECIFIC please

  Hello

  My problem started when I re installed windows 7 Ultimate and everything worked perfectly including wireless internet connection

  Only free Wifi does not, I tried to download almost all of the drivers in the support page for the model my and still not identified, I even called customer service and they sent me the link to the pilot specific and still does not.

  Please help, any solution...

  THX in advance :)

  Good guys and finally I did it.

  I will talk about my missing driver, either (on the inside of the Device Manager) (NETWORK CONTROLLER), I just pressed on right click then properties, then you choose details... instead of the description of the device open and choose the lds material then simply copy the 2nd driver name and google it online, you will find free download from many sites thro web... I just did this and simply the wifi works perfectly now.

  :)

• support for windows 8 on HP Mini 210

  As an experiment I just installed on my Mini HP210 WIN8.

  It seems to work fine, except for applications. WIN lets know me that they cannot run because they require a resolution of 1060 * 768 so that the original pilot for the HP210 only supports up to 1060 * 600.

  Question: is there a way to deal with this problem and get applications work?

  Concerning

  Stone

  In fact, I got mining works great.

  Windows key + X > run > regedit

  In regedit, search for "Display1_DownScalingSupported."

  Change the value of '0' to '1', and then restart your computer

  After you restart, you can mount your higher resolution than the native size disaply, which not only allows you to run applications Metro, but also makes for a better overall experience, at least in my opinion.  The resolution is not as strong because you're scaling down, but the extra real estate is worth the trade-off.

  -ted

• Computer HP mini 210 - 1010NR: password administrator or power on password

  Im a hard time getting into my laptop the system disabled code is 82788175
  ID really appriciate any help please and thank you.

  @Rviviana

  Enter 33680171

  Kind regards

  DP - K

• HP MINI 210-1010NR * HARD DRIVE THERE IS NO MESSAGE *.

  When you run the Test at startup, it gives this message.  There is no hard drive, that's why the test at startup comes as "failed" and he also said that the found boot device (3F0)

  It seems that the hard drive has failed, it must be replaced.

  Here's your guide to service, see "component replacement procedures.

  http://h10032.www1.HP.com/CTG/manual/c02241565.PDF

  If it is under warranty, contact HP directly for a free replacement of the hard disk.

  .

• call of duty 6, I installed and the game is choppy... help me please if you can ty... _

  Why is my jerky game I am running windows 7 whitch is classified in the specifications compatible if you can help I'll b very grateful...

  gajie and jackson369,
  First thing to check is your hardware drivers.  Make sure you have the latest drivers installed for all of your hardware (video, audio, NIC, chipset, etc...).  If you still have a problem then perform a clean boot to verify that no other software is in conflict with the game.  You can also try to lower the video settings in the game and see if it improves it.    Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Whenever I try to watch a show on Netflix my sound gets really distorted? I deleted & re-installed Silverlight 3 times with no changes! Help me please...

  I have no problem at all to watch things on you tube or listening to games. It States to use when Silverlight is running & Netflix requires Silverlight to be used to stream movies!

  Hello

  ·         You have installed the latest audio drivers on the computer? If this is not the case, try to install from the manufacturer's Web site and check if it helps.

  Since the problem seems to be linked to Netflix, I suggest you to send your query using Netflix forums for assistance:

  http://forums.Silverlight.NET/

• I can't find my dell dock after he disappeared (it was installed when I bought the computer dell laptop) HELP me please!

  I used to have a dell dock... now he's gone. I lost the front and found again, but I forgot how to find.

  Hi Nisha,

  Please see the thread below for options: http://answers.microsoft.com/en-us/windows/forum/windows_7-desktop/how-to-restore-the-dell-dock-toolbar/163e6840-bf50-4c49-bc2b-59a80bc7d30e

  Good luck!

  Kosh

• NetBook, HP Mini 210-3000ew vs Windows 8, NEED HELP

  Hello

  I have a few questions. At first sorry for my English, I know it's horrible; D.

  1. I want to install windows on my Hp Mini 210-3000ew netbook 8. For an application on this OS, I need to have the screen resolution 1024 x 768, while my normal screen resolution is 1024 x 600 (recommended by the manufacturer). I can go to regedit and change the 'Display1_DownScalingSupported' value to 1, so I'll be able to adjust my screen resolution of 1024 x 768, but I don't know if this operation won't spoil/break my screen/matrix. What are the chances that my screen/matrix can break down as a result of this operation? Or maybe after a certain period of time to aid higher than the recommended resolution that I will get a few dead pixels or something like that? Is - this windows 8 after changing the present resolution be ok? And can I install it with screen resolution 1024 x 600 or Setup will be out of reach of the screen?

  2. I've been looking for the drivers for windows Web site 8 for Hp Mini 210-3000ew, but I only found drivers for windows 7. They are compatible with windows 8? Or I do not need to install any drivers for my netbook with windows in all 8?

  I am happy for any help. Thanks to advice.

  As far as I know, Windows 7 Starter is an OEM product only and the only source is from the supplier. Microsoft doesn't have a link to download the image.

• Mini210-1000 HP: HP Mini 210-1000 AHCI Support?

  Title says it all, to a degree...

  Nothing anywhere in the BIOS that indicates this thing supports AHCI, I so wanted to just take your brain...

  If I install an SSD to replace the disk HARD in it now, will it work? Will I have AHCI/TRIM support?

  Any contribution is appreciated. Thank you!

  What HP model year cell phone is yours?   What is the model number on the black serial number on the bottom?

  The one I have is quite old. I just checked and it's a HP mini 1000.

  @ChorusOfOne

  Do not leave immediately.

  I just watched a little more features. The manual may very well be wrong.

  The most recent mini 210-1000 with product number WA543UA #ABA ad product name HP Mini 210-1010NR has a disk hard Serial ATA II (SATA).  If it is indeed this than yours, it means that a SATA SSD would fit well and work.

  See the first part of the next video. Of course, it looks like a SATA hard drive for me. Check out the connector.