Border in black screen HP Mini 210, screen shifted downwards - problem after power outage

Similar Questions

• You have an another "Black Screen of Death" problem on Vista 64-bit.

  You have an another "Black Screen of Death" problem on Vista 64-bit.  I downloaded and burned the CD to repair, and it loads fine.  However, whenever I go into the options, it is not read my C: drive.  It will not restore the system, it cannot run a "Startup Repair" and if I go in the "Command Prompt" and type "C:", it says that the device is not ready, so I can't change the registry to attempt to repair.  Am I missing something that I need to do first in "Setup"?  Note that without the disc, I go straight to the black screen with cursor.  I can't go in Mode safe, I can't perform sticky keys, and I can't do anything else.

  Any help here?

  Hi AaronTom,

  1. you remember to make changes to the computer, after which the issue started?

  I suggest that you contact the manufacturer of the system for a Windows Vista DVD, and then try to perform a startup repair using it:

  Startup Repair: frequently asked questions

  What are the system recovery options in Windows Vista?
  
  

• My touch screen has a problem after downloading the IOS 9.0.2. Already try apple advises the steps. But the problem still occur. Already done restart of strength. Factory setting Reset also possible. But still the same problem. Can only be used at one min

  Hello!!!

  IM Apple Fan.

  Purchased IM Ipad2, Ipad4, Iphone6

  Last month I already buy s Iphone6 +.

  Today I feel unhappy

  MY IPHONE 6 'history '.

  My touch screen has a problem after downloading the IOS 9.0.2.

  Already called and try apple advises the steps. But the problem still occur.

  Already done restart of strength. Factory setting Reset also possible. But still the same problem.

  Only can be used for a minute. After that... The problem comes in again & again & again...

  APPLE.COM

  Can U help me

  Only products of Apple of love before updating the version 9.0.2

  iOS 9.0.2 happened some time. The last iOS is iOS 9.2. If you have not updated, updated. If you restored to the factory, it must have downloaded iOS 9.2. Also, if you restore to the factory and the problem is still there, then you must make an appointment at the Genius Bar to the nearest Apple store or Apple authorized service provider or call the Apple Support to have the device examined by Apple. There seems to be something wrong with the screen.

• Black screen with blinking cursor after the passage in MSC mode

  I followed the recommendation to disable startup secure in the Bios then move the UEFI Bios to the CSM. But when I go to set up what I see is a black screen with a stable cursor in it. And it doesn t go in the Bios.

  The black screen remains.
  I turn off the laptop and once again now, but I still have a black screen with a cursor that is stable and that s it.

  It's like that and it doesn t go to windows even go into the Bios, I can t.
  What should I do?

  Help, please...

  Hello

  After the passage of the CSM and disabling secure boot UEFI mode, you will not be able to boot from the HARD disk as the installation of Windows 8 requires secure boot and the mode of the UEFI.

  Now you can boot from the disc or other media bootable (USB flash key) to install the Windows 7 system.

  I guess you've made these changes installed Windows 7. Right?

  By the way: what model of laptop you have exactly?

• Satellite A100-033 - black screen with no data after the advanced boot option

  I tried each F8 option in the advanced boot options to get my work laptop. There is just a black slowed after repairing Windows files and Loaded. Also F2 & F12 even when I try to use the recovery disk it remans black?
  Safe mode: nothing is displayed on the screen at all

  I noticed my mouse cursor can be seen moving around the screen, but the rest of the area is black.

  OS Windows Basic 32 bit IE9 Satellite A100-033

  Hey,.

  So if you start from the Toshiba Recovery disk you also get a black screen?

  What happens if you start from a normal Microsoft Windows disk? Just to make sure that it of hardware related problem or not

• Satellite C660 powers, black screen and switches off the power

  Hello world.

  I have a C660 - 22v.Everything worked very well. An hour later, then to use the laptop again, it works, and he turned on as normal in 2 clicks, then more nothing. Just a black screen, not yet turned on, then after 5 to 15 seconds, the fan accelerates for a second or 2, then the laptop turns off.

  Tried with the batteryout & just the charger pluged, just the battery, hold the power button, all sorts of ways, but it only of the switches off the power.

  I think that the hard drive has failed. Any help would be welcome as its out of warranty (16 months).

  A big thank you in advance, Neil.

  In my opinion it has nothing to do with the hard drive. I assume that there is a problem of electronic power supply. I have a similar problem with my A300 and at the moment I put t know what to do.
  Repair is probably quite expensive so I m thinking about selling on eBay as being faulty.

  Problem is that we cannot do much. What should do? You can dismount, take a look inside and put the new.

  Either it works or not. I'm afraid that your problem is for the service and it must be checked by the guys from the services of m.

• Re: Black screen on Satellite P300 after removing the SD card

  Hello @ community!

  I had a P-300-21Z. 1 month.
  Last time I got the shot screen SD card in black and never returned to normal...

  The PC works fine on the external screen...
  I can see what is on the computer laptop screen at the back but is almost completely black...

  My guess is it is the lamp of the screen burned!

  What do you think?

  Thank you.

  > I can see what is on the computer laptop screen at the back but is almost completely black...
  Sounds like an inverter problem.

  The FL inverter (very small part behind the screen frame) is responsible for the backlight of the screen and it controls the backlight.
  If the FL inverter will start to malfunction, then you would see everything as behind a fog of ticks, I think this is your case

  I recommend contacting ASP which would be able to help you.
  The P300 notebook is not very old, and I think the warranty to be valid.

  See you soon

• Black screen HP DV2740SE problem

  Hi all

  I have this laptop DV2740SE a little more than 2 years. Everything worked fine until last night.

  I was doing my work, but all of a sudden, the screen turned black screen. And he just hung in the black screen.

  I did the forced closure and back running the computer. And there was nothing, it was only a black screen when I rebooted. (It's a dead black screen, not as direct black screen with light background).

  I can't even reach the BIOS screen. And the LED on the hard drive was off all the time.

  Only happened once, after a couple of times of switching forced on, and besides, I somehow got to the loading ONCE screen windows (* LED disc doing this time.). But, once again, her tour splash screen to this flag of windows screen and stopped.

  I have recently upgraded the OS from VISTA home premium to Windows 7 Professional for 3 weeks. And it had worked very well.

  Anyone have ideas on this?

  Please notify. Thanks in advance.

  Hello

  Sorry to say that it is very likely that your graphics card is dead. I had a dv2412ca with similar symptoms.

• Computer won't turn on completely (black screen with blinking cursor) after installing windows updates

  8/7, the following updates have been installed correctly:

  Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update (KB951847) x 86

  Update definition for Windows Defender - KB915597 (definition 1.63.1021.0)

  Following this installation, the display resolution has been reset to be very low.  When you try to reset the resolution, I was alerted to a driver problem, so tried installing this in vain (below error code)

  Intel Corporation - display - Intel (r) G33/G31 Express Chipset Family

  Error details: Code 800703E3

  After that, he went to sleep the computer, but was unable to select 'sleep' (it is grayed out) but the stop keys option indicates that the updates were ready to install so I stop thinking which may help.  It was last night.  This morning, the computer was on, seen the screen DELL, then a black screen with flashing white cursor in the upper left corner.  I tried ctrl-alt-del, got the dell screen appears again, then black screen.  I tried ctrl-alt-del, thinking I could try one of the options key F at this time, but he won't even go to this point, the dell blank screen just screen.

  Any ideas would be very appreciated!  It is the second major problem that I had recently after updates vista install (the last time I temporarily lost access to all my files, because they were placed under a temporary user account that had been created!)

  Thank you!

  Hello

  You try to borrow the Vista DVD to any of your friends and do a repair (inplace upgrade) it might help you solve the problem.

  All the best,

  Geek

• black screen at startup and after logging

  I have this problem for a few weeks.

  When I start my pc, when windows xp starts to load sometimes it appears a black screen, nothing else.
  But sometimes win xp load success and after I have connect it reappears, black screen.
  I tried to find a solution for this in google, but nothing helps, it makes me angry.
  She sucks can anyone help me on that I would appreciate it. Thank you!!!

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  If you are overclocking STOP

  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

  Please follow these instructions to collect data against crashes and upload them here, to your Skydrive or a service such as Rapidshare file sharing.

  http://www.SysNative.com/forums/showthread.php/68-blue-screen-of-death-%28BSOD%29-posting-instructions-Windows-8-7-amp-Vista?p=303&viewfull=1#post303

  http://SysNative.com/0x8/BSOD_Windows7_Vista_v2.64_jcgriff2_.exe

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:

  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
  * Zip up the contents of this folder
  Please, upload to skydrive or a file sharing service and put a link to them in your next post.

  Go to start > search/run > cmd > msinfo32 and include it in the upload

  To ensure the minidumps are enabled:

  * Click Start, in the search box, type: sysdm.cpl, press ENTER.
  * On the Advanced tab, click Startup and recovery... Settings button.
  * Make sure that automatically restart is unchecked.
  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
  * OK your way out.
  * Reboot if changes have been made.

  http://www.SysNative.com/forums/showthread.php/325-BSODs-but-no-dump-files

  http://www.osronline.com/article.cfm?article=545

• Black screen with cursor just after turning on the computer in Vista

  When I turn on my computer, it's just a black screen and the cursor. I can move the cursor autour, but I can't go any further. The same thing happens in safe mode. Help, please! :( I tried to repair vista with the installation cd, but it is no problem. I searched around the internet and many people have the same problem, but I can't find a solution to this! Please help me! :(

  Hi SiljeRypern,

  Please see the thread with a similar problem and fix possible:

  http://social.technet.Microsoft.com/forums/en-us/itprovistadesktopui/thread/06881a84-595e-40b0-96CE-87cb7a1874ef/

  I hope this helps!

• Inspiron 3437 black screen on wake-up after update 8.1

  Hi guys,.

  I recently bought this dell inspiron 3437 and windows update to 8.1.

  After the update, the screen remains black if the laptop has been in mode 'sleep' for more of, say, a few minutes.

  I read that it is a common problem after update to 8.1 windows, but I have not found a solution that works for my laptop.

  Any ideas on that?

  Update: yesterday I returned to windows 8, assuming that the 8.1 caused this problem.
  However, I get a black screen on wake up again and I have to do a hard reset.

  Edit: went back to 8.1 so that I could install this driver from Intel. Why is it not a standard update or in the support section of the driver dell?
  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=23323&keyword=4400+graphics+driver&DownloadType=drivers&lang=eng

  Edit 2: AAARGH, who has not yet set... After a few hours of sleep he still would not wake up properly.
  So, I choose not to let my laptop to sleep, instead I leave it hibernation.

  I have changed this in the poweroptions. Just put everything to hibernate instead of sleep (so when the lid is closed, when you press the powerbutton).
  It takes a few seconds extra for the laptop to wake up (but still quite fast, less than 10 seconds), but at least the screen comes alive.

  PS. Sorry for all the dubble posts suite thisone. Assume that something went wrong yesterday.

• Pavilion g6t-2000 black screen & Sleep Mode problem

  Features of the laptop:
  Name: HP Pavilion g6t-2000 CTO Notebook

  CPU: Intel I3 - 2370 m 2.4 GHz, Intel HD 3000

  GPU: AMD Radeon HD m 7670

  OS: Windows 7 64-bit

  So over the past two weeks, I have been having a problem with my laptop after installation of an update to the beta with my GPU driver. Whenever I put my computer to sleep mode and turn on I get a black screen. The computer is turned on and set to lock the screen, so if I typed my password, it'll make the connection noise. Also, if I look at the right angle, I see a very dimmed screen which is there before I moved it in mode 'sleep'. Strangely when I put the laptop in hibernate mode and turn back on the screen is fine.

  Things I've tired:

  • Removed the beta driver and the GPU of HP drivers installed via the HP website
  • Update BIOS f.25 (latest driver)
  • Changed the power of options such as checking to see if hybrid sleep is turned off
  • Check the BIOS, it is very little options and none has to do with my problems. Only thing I can see on BIOS is to change the boot priority and enable and disable the little features like "fan always on / off", etc.
  • Running sfc/scannow

  On a side note, my laptop has been dropped about a week BEFORE the update to the beta GPU on a foot of my bed. "Sleep" mode was not affected by what I know. I was also reading autour on a power inverter and there may be possible that it has been damaged and if you think it is maybe it how can I test it? Thank you.

  I finally got the time to do a restore on my HP Pavilion laptop factory g6t-2000 settings and after doing a test with the AMD drivers, I discovered that drivers AMD were the problem holding my laptop to wake up full-screen mode 'sleep'. Thank you very much for your help AxshunJaxun.

  I recommend to not install the AMD drivers and once you do and that you do not have a restore point the only solution is a factory restore settings.

• Windows 8 black screen and the cursor after the connection

  Hello. I tried to upgrade to 8.1 Windows 8 Windows and it is stuck on like 3% for one hour, so I just rebooted the computer and he returned to Windows 8. I'm going to sleep and come back the next day and go on my laptop and it auto connects me and it goes to a black screen and I only have the slider on the black screen after login. I don't see the start menu, but I receive notifications for as sticky keys or any other notifications lights. I turned off my computer at least 20 times, took out the battery, empty the battery and tried to boot in safe mode with no luck. It is unlikely that it is an internal problem, because if I leave my computer alone for a few minutes, my screen saver photos appear. If anyone can help me solve this problem or help me get in easier safe mode would make things less stressful. I have an Acer Aspire V5 - 571 series. Thank you.

  Hi Roy,

  This problem may occur because of corrupted on the computer boot files.

  I suggest you to perform the checking and automatic repair if this solves the problem.

  If you do not have a DVD of Windows 8, I suggest you check out the link to see how to create an installation of Windows 8 media:

  http://Windows.Microsoft.com/en-in/Windows-8/create-reset-refresh-media

  Follow the methods suggested below:

  Method 1:

  Start on the recovery environment using the installation of Windows 8 media.

  Follow the steps below:

  Note: before proceeding further, make sure that the boot priority is set on DVD drive in BIOS. BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  • Insert the DVD to install Windows 8 on DVD-ROM and restart your computer.
  • After you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.
  • Select the type of keyboard and good time.
  • Click repair your computer in the lower left corner.
  • Select Troubleshooting in choose an option screen.
  • In Troubleshooting screen, click Advanced options .
  • Click the automatic repair of the Advanced Options screen.
  • Then choose the operating system.
  • Windows 8 will then pick up questions on the hard drive and check that all required files are intact.

  If the problem persists, proceed to the next method.

  Method 2:

  Follow these steps to perform a system restore:

  • After you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.
  • Select the type of keyboard and good time.
  • Click repair your computer in the lower left corner.
  • Select Troubleshooting in choose an option screen.
  • In troubleshooting screen, click Advanced options .
  • Select System Restore.

  For reference:

  http://support.Microsoft.com/kb/2756559/en-us

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Please let us know the results.

• S10-3s black screen, no bootlogo - dead after four months?

  Hey,.

  Since yesterday, the doesn´t machine do a lot:

  status-leds of power, battery, and hard disc burning.

  fan blowing for a second. and that s it.

  Can hear the HDD runs, but does not.

  Black screen, no boot logo...

  External display is black, too.

  Any suggestions? I need man, the thing at school, you just bought in December!

  THX in advance.

  Could be in German as well!

  Thx for the link!

  Yes, be it a:

  'Action of symptom, in order '.

  A beep & white LCD.
  Card system. »

  Guess beep code must be valid for the s10-3s too

  Straight: Service, here come us!

  Could be * closed * here.

  THX. again, guys - not happy, but s * happens!