HP Notebook: Cannot view the video of the USB. His work howevr screen remains black.

Similar Questions

• Cannot get the USB to work HP G6-2278dx

  My girlfriend just bought the HP 2278dx g6 with pre-installed Windows 8. Unfortunately, she's not worried about her and is pretty set on Windows 7. So I bought his windows 7 Ultimate and installed on his computer. I downloaded and installed all the drivers I could find, but I can't the usb on the left side of the computer at work. In Device Manager"also of shows me some other stuff that does not work (I would like to list, but she of not here right now and has the computer with it and won't return until Wednesday)

  I thought it would be a chipset or something I need to download, but NOWHERE on the internet find a chipset for the HP g6-2278dx win7 64-bit. Sort could someone help me? (btw, the only usb that works is on the right side next to the power input charger.)

  I just installed Win 7 Ultimate 64 bit version on my G6-2278dx. For me to get my USB 3 ports to work, I installed the drivers for the AMD chipset from this page.

  http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2

  I believe that the network card is the 8168 8169. I don't remember the hand. You would like the Win7 and WinServer 2008 R2 driver (Version 7.065) I'm not on my laptop, so I'm out of memory which is not always good. Wireless network card works since the drivers used by Windows 7 if I remember correctly, because that's what I used to download all the drivers I needed for the other stuff.

  I'll have to check which driver I used for wired LAN port, but you can get them from Realtek on these two pages.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  and or

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

• Alienware x 51 starts, but the screen remains black.

  I bought my x 51 all with warranty 1 year ago a year and a half, recently it has been giving me some problems and today I can't use it yet at all.

  The problem started with my screen remains black when I turned on my computer (punt, never awake from sleep), but which would be corrected by me once or twice by restarting the computer. That did not last too long, and soon it did not matter how many times I rebooted the computer. I finally had to unplug the computer and press and hold the power for 30 seconds to see if it worked.

  He did, but this solution has worked only once, and now I have nothing seems to regularize my situation. I tried switching monitors and cables with my brother (who is an identical 51 x), but nothing has worked.

  To summarize:

  My computer turns on.

  Not funny lights or noises (save a beep on startup)

  Screen remains black on reboot of the screen it says he receives no signal and falls asleep.

  No problem when it runs normally (not funny colors, stripes on the screen or blur).

  Help, please. Dell support wants 70 to 110 dollars to listen to even my problem, which is money, that I don't have at the moment.

  Thanks for anything that might help!

  Sounds like you have a dead video card, from the link above looks like there is no output from vga Intel to tun tests, you must remove the old video card and test with another video card that works to verify that the card is in fact dead, like your brothers x 51 remove the video card and test it on your machine.

  If I had this machine in front of me I would use one of these babies for once then run tests on the video card.

  HDMI to DVI

• I cannot view youtube videos, but I can see it in chrome and ie and does not update flash

  I cannot view youtube videos, but I can see it in chrome and ie and flash will not be updated or the other I always click Update now and download it and it says conplète to update but then I check the plugin updates and always says the flash needs to be updated. I run firefox in safe mode and I still can't view videos and I tried reading the forums and makes suggestions like clear cookies and such, but not luck. Another thing is that I get a weird screen when I try to play videos

  http://DL.dropbox.com/u/76233373/YouTube.jpg

  This is a picture of the screen I get
  help would be appreciated because I've had this problem for awhile now

  There are some compatibility issues between the last Flash drive and a few Add-ons Firefox or settings. Could see you if anything in this article helps you: 11.3 Flash does not load video in Firefox.

  You can also consider turning off new protected in Flash 11.3 mode, since this feature is currently being debugged. See this article from Adobe support under the heading of 'Last resort': Adobe Forums: how to fix protected Flash Player for Firefox mode?

  About the update, which the Adobe gives you usually is just a small installer program that you run that downloads the actual plugin. I recommend having closed all Firefox by doing the updates to Adobe so that none of the files are ignored in the process.

  At least one user has noticed a problem where Adobe installed two versions of Flash-by-side; the other oldest had to be removed manually. See the flash works fine in firefox 14 but I can not update.

• Satellite C50D-A-133 with Win7 - cannot install the USB 3.0 driver

  I Satellite, C50D-A-133 with Win 7 x 64 and cannot install the usb 3.0 drivers.
  I download the driver from the support site of toshiba for usb 3.0 for win7 x 64 and it starts to install the driver, but in the end it saids...
  Windows found driver software for your device but encountered an erroe trying to install it.
  AMD USB 3.0 host controller
  The system cannot find the specified file.

  I try to point the location of the driver but same error.
  Other drivers installed ok only gives error

  I ve downloaded and unzipped the driver and everything seems OK.
  As far as I know laptops equipped with platform AMD isn't chipset driver and after installing display driver must be installed USB driver.

  Try to download it again and start the installation manually.

• Cannot eject the USB device.

  Cannot eject the USB device. I don't see the icon to safely remove in the task bar.
  I tried to run the following path, but not luck.

  (C:\Windows\System32\rundll32.exe shell32.dll, Control_RunDLL hotplug.dll)

  The icon is hidden behind the small arrow in the lower right of your screen.  Click on that, and you will see a number of icons, which one will remove safe material one.  Be aware that unless you have a removable USB device connected, the icon will not be there.

  Good luck.

• Cannot use the USB in the Portege M500

  Hello

  I use the model of laptop Portege M500. When I connect my Transcend 4 GB pen drive it detects and dispays an alrert lower-right with "new hardware found". At the same time another box dialog box opens asking for the installation, I tried to give next & finish but it does not.

  1A tried to install the drivers of the utility in the toshiba site.
  2. check the USB - it works very well in the other system.
  3. I use Windows XP. I checked the registry key to activate the pen drive.

  Ended in vain.

  It would be nice that you can share your ideas to connect the USB into the laptop.

  Thank you.

  Hello

  I had the same question that I couldn t use my pen USB drive more. After a search here a bit I started to remove the USB ports in Device Manager. Then I restarted my laptop and the USB ports are being installed again. Now, I have my USB again! :)

  In addition, it would be interesting to know if you have tested another USB key. Another one works

• MacBook Pro 2015 turns on but the screen remains black...

  Hello

  Today, I tried to turn on my MacBook Pro, but my screen stays black. When I press the caps lock button, it turns green which I guess means he lit. I've also heard the startup chime it generally makes when you turn on. I already tried to turn it on and off several times and reset the SMC and the LANDAU... The screen is always black.

  Could someone help me please?

  Also a few minutes ago the fan has started to make noise in the macbook...

  But the screen remains black.

  Thank you

  Shaynidw

  Hi shaynidw,

  From your description, it seems that your MacBook Pro is powered, as soon as you hear the startup chime and see the light on the keyboard.  Thus, it seems that the problem may be with your screen or the video card.

  On the screens you see when you start your Mac

  Power on

  

  When you turn on your Mac, display is off (black) and you hear a startup chime. Your Mac Initializes his BootROM and memory (RAM live). It then performs a power - on that self test (POST) and a test of BootROM. If you hear beeps or chimes at this stage, this indicates a possible hardware problem and start stops. If you add memory to your Mac, check that it is installed correctly.

  White screen

  

  After that only walking self-test is completed, your Mac sends a video signal to your connected screens. The screen may appear black or grey at this point in the boot sequence and backlight of the screen should light up. If you do not see the image appears on your screen after a few moments, try increasing the brightness of your screen. If you use an external monitor, make sure it is properly connected and turned on.

  shaynidw, if set up the brightness of your screen does not help, you have an external display (computer screen or TV) that you can attach to your MacBook Pro to test?

  In addition, you can try to start your computer in safe mode to see if you get different results.

  Try safe mode if your Mac does not end commissioning

  If the problem persists, you may need to take your computer to an Apple Store or service provider authorized Apple , so they can inspect the video card and cables to isolate the problem.

  Take care.

• I just bought my hp pc Pavilion g series, but many times not dΘmarre; the screen remains black or blue and must strive to market several times. What is going on?

  When I turn off my pc and that you want to turn it back on, it does not work and the screen remains black or blue, sometimes but nothing else and does not

  starts up, until I have try several times in pushing and disable the power button and suddenly starts working again. The pc is almost brand new (2 weeks)

  What is going on?  Thank you very much

  Hello

  I suggest you do the repair of the system startup and check if that helps resolve the issue.

  Check the link for more information on repair system below.

  Startup Repair

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair

  You can also check the event viewer for more information on the error message.

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  See also:

  Resolve stop (blue screen) errors
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

• Windows vista screen remain black but the power and the fan runs

  I have a laptop of 5 years that I use for school. Normally, I have my laptop on the way 'sleep' but one day, that the display lights «» I press the power button to restart and it stops, however, when I turn it on, it will only show power and the fan runs. The screen remains black. Can someone help me, I need to access my documents from the school.

  Thank you
  c

  Hello

  Video card problems are the most common cause of this problem.

  Method 1:
  Reinstall your video driver a. right click on the taskbar and then click Start Task Manager.
  b. click on the processes tab, click explorer.exe and then click on end process.
  c. click file and then click New task (run).
  (d) in the text box to open, type explorer.exe, and then click OK.
  e. click the Start button, type device manager in the start search box, and then, in the search results.
  Click on Device Manager.
  f. double click on display adapters, right click the display device, click Update driver software and then follow the steps in the wizard that appears.

  Method 2:

  Start the computer in safe mode and run system restore

  a. click the Start button, click the arrow next to Shut Down and then click on restart.
  b. do one of the following:

  • If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.
  • If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  c. on the Advanced Boot Options screen, use the arrow keys to select Safe mode, and then press ENTER.
  d. connect to your computer with an account of a user who has administrator rights. When your computer is in safe mode, you will see marked Safe Mode in the corners of your screen.
  e. click the Start button, type "System Restore" in the search box, click System Restore, and then click Next.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  f. choose a restore point when your PC worked as expected, click Next and then click Finish.
  g. restart your computer normally.

  Keep us updated on the status of the issue.

• G62 screen remains black after the windows logo

  Hello

  I have a HP G62-b05SD. I noticed that many people have the problem of simmular.

  I know what makes, but don't know how to fix it.

  So here it is.

  Sometimes when I boot / reboot system screen turns black after the windows logo, but if I wait a while, I do not hear the star tune up windows, but the screen remains black.

  I noticed that this happens when I shut down or restart the system with a usb port (be it a mouse or a stick is not serious)

  If I all out en usb port restart or turn on the machine for the first time this day here, everything starts well.

  So there must be some driver problems I think with usb ports and the screen or something.

  Help, please!

  HP G62-b05SD

  Windows 7 64-bit

  Intel i3

  ATI mobility radeon graphics card

  Ow and when I get the black screen, the hard reset does not always work.

  I also did a startup repair and it showed:

  "If you have recently attached a device to this computer as a camera or portable music player, remove it and restart your computer. If you continue to see this message bla... bla... bla... "

  I hope you can help.

  Hi Frosty1984,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP G62 - b05SD Notebook and having problems with the starter. Here is a link to BIOS update.

  What is the USB device that is at the origin of the questions?

  Thank you.

• USB port from a digital Multiport card will not read the external SSD drive. Right USB - c for the USB adapter works fine.

  USB port from a digital Multiport card will not read the external SSD drive. Right USB - c for the USB adapter works fine.

  It's a new 12 '' MacBook

• Toshiba Qosmio DX730 PAQ13A - no signal - the screen remains black

  When I turn on PC (all in a single DX730 PAQ13A-010005) the amber light turns white as it should. However, the screen remains black.
  If I unplug the connection, and then reconnect it, a message appears on the screen indicating 'PC', it then changes briefly to display the message no Signal.

  He will not go to log in screen etc. because the screen stays black.

  All advice appreciated.

  Must be the hardware problem.

  It seems that no signal can be picked up by the monitor...
  Probably the mother or any other element connected to the motherboard is defective...

  I guess its time to contact a technician if you want to solve this...

• 32L3441DG - bright green but the screen remains black

  I turned on my PC and my TV, everything has worked perfectly.

  When I came home from school, my PC was on but I turned off my TV when I went to school. I tried to turn it back on, the light was blinking red and green as usual when you turn it on. When he stopped flashing green, the screen remains black.

  

  Posted by Patrick p
  

  I turned on my PC and my TV, everything has worked perfectly.

  When I came home from school, my PC was on but I turned off my TV when I went to school. I tried to turn it back on, the light was blinking red and green as usual when you turn it on. When he stopped flashing green, the screen remains black.

  Hello, I have the same problem.
  I can hear TV-Programm, but the screen remains black.
  Uwe,

• Satellite A300 - turn is not on, the screen remains black

  I have a laptop Satellite A300. I tried to turn it on when I got home from work and the screen remains blank. The bottom (plug, power and battery lights) turns on but the screen remains black.

  Can someone help me?

  Hello

  It of hard to say what's going wrong here, but maybe it s just a small issue that could be solved easily.
  Try this;
  Remove the battery, disconnect the adapter.
  A few hours and reconnect the two parts.
  I had this problem in the past and leave the laptop disconnected during the night.
  The next day, I connected battery and adapter A\c and the laptop worked again

  Maybe this will help you too