HP Officejet 6600: printers

Similar Questions

• HP OfficeJet 6600: Printer Office scanning does not work

  I have 3 PCs that have been updated with 10 windows and all had the upgrade to the software and drivers proposed for 10 Windows of the software of the printer.

  Alone is capable to scan himself. This is done by using the HP Officejet 6600 icon to access to the

  "C:\Program HP HP Officejet Officejet 6600.exe 6600\Bin\HP" - launch UDCDevicePage

  (also available in an earlier version of the software and not available on the other pc).

  This open a page with a sweep, a document or a Photo option, which allows me to scan a document.

  Can you help me please why scanning works on a pc and not the other 2

  Managed to find a doctor Print & Scan and problem solved and can scan all 3 printers

  Thank you

• OfficeJet 6600 Fax confirmation date and time fields zeros

  When I send a fax directly from the printer that prints the confirmation record has a field for the date and time, but it shows all zeros (see below)

  Is it possible to fix these so that they are accurate? If I need to prove that a fax has been sent, it must show when.

  With the help of 6600 OfficeJet on WiFi with Windows 7 64 bit

  

  Hi CJChristian,

  Welcome to the HP Forums!

  I understand that your date and time of confirmation fields are equal to zero with your HP Officejet 6600, and I am happy to help you!

  Please have a look through this guide. Implementation of the hardware of the printer for e-all-in-one printers HP Officejet 6600 and 6700 Premium H711n. Select the Officejet 6600 and search for step 7 set the Date and time.

  Also this guide can help too. Setting up the device HP all-in-one to send and receive faxes.

  I hope that these guides are useful to you and have a nice day!

• OfficeJet 6600: officejet 6600 will not be installed

  I have a computer that is running Windows 7 (updated) with a 6600 Officejet attached via the USB port. It worked fine for 3 years, BUT I had to reinstall the printer 7 times in the last 2 weeks. When I turn off the computer at night and turn on the next morning and I begin to print something, I get "no printer installed." It SEEMS to make no difference if I turn the printer off or leave it on when I shut down the computer.

  Any ideas?

  Rusty

  Hi @RustyDHH,

  Thank you for reaching out to the forums! I understand that whenever the computer is restarted, you must reinstall the printer software. I'd love to help you.

  I have provided a few steps to try to see if we can solve this to happen again in the future.

  Here are the steps to completely uninstall the printer from the computer.

  In devices and printers, click once on any icon listed and select the printer at the top of the display server properties, click the driver tab.

  Select the 6600 Officejet then click on delete, the pop up dialog box.

  Select Remove driver and driver package, click OK, click Yes in the confirmation pop up message. (if they are not in the list, it's very well)

  Then in the printers and devices window, right-click and select remove device for Officejet 6600 drivers.

  Unplug the USB cable from the computer.

  Uninstall the printer software.

  Restart the print spooler:

  Click Start, run, type admin in the search programs and files box and then click on the list management tools.
  Double-click Services.
  Right click on print and left spooler, click Properties.
  Click on stop to stop the print spooler.
  Click Start to restart the print spooler.

  Run the Microsoft Fixit Tool: diagnose and automatically repair Windows files and folders problems.

  Reregister Windows install:

  1. Quit all programs.

  2. Click Start, run, type msiexec / unregister in the Open box and click OK.

  3. Click Start, run, type msiexec/regserver in the Open box, and then click OK.

  4. Restart the computer.

  Disable all startup programs and temporarily disable the Antivirus software. There might be something running in the background cause of conflicts. How to use MSCONFIG. Click the Startup tab, and then click Disable all.

  Make sure that you are connected to the computer with Admin rights, and then reinstall the printer using the latest drivers. Here is the link: 6600 Officejet HP e-All-in-One Printer series - H711 full feature software and driver.

  If the problem is resolved and that you appreciate my help, please click on the button "Accept as Solution" and the "Thumbs Up". Let me know how make you out. See you soon!

• HP Officejet 6600 print wireless help

  Attempt to try to solve my HP Officejet 6600 to print wirelessly on my network and I tried just about everything I could think of (including the rattling of my printer on the network to see if they are on the same network, they are) and my printer still does not recognize any signal from my computer trying to get a print of my computer job. I have already confirmed that my printer working via a USB cable, but I wish I could put my printer to another room, connected to a power source and be able to print to it outside of my network, but not luck so far. Can someone help with this problem?

  My OS is Windows 7 Edition Home Premium SP1, if this is useful.

  Review of my last post...

  Wow, regardless of the Printer Spooler service has been, which seems to have done the trick. Also went and made a new WiFi printer (when the USB cable is installed), and it was labeled differently. Somewhere in one of the configuration menus had something on this subject (assuming it's a hostname?) It said HPB96E1W (HP Officejet 6600). It was also the name of the printer that appeared when I installed it as wireless under printers and faxes. When I did as just a USB connected printer, it appears just as "HP Officejet 6600". Maybe a problem of labelling or something to do with the Printer Spooler service? No idea honestly but the printer works now move it to another part of the House as long as it captures my wireless signal. This problem is completely resolved, and I have also 2 different connections to work with incase I ever spend my printer back near my computer. Thanks to all who have posted in this thread with ideas help, much appreciated. Moderators or anyone who may lock this thread if they wish. I'll post another thread one day if I have problems with the printer again.

• OfficeJet 6600 Gets the message of Network Installation fails when you try to install

  Hello

  I have the worst time setting up my new printer wireless Officejet 6600. I work with a wireless-N router that was purchased less than a year ago. I have other wireless products that work well with the internet, so I do not see there is a connectivity problem.

  The test of the printer indicates that everything is OK:

  Wireless on - PASS
  Wireless - PASS work
  Signal quality - very good
  Connected - PASS

  etc, etc.

  I ran through all the troubleshooting I can find and nothing works. I have disabled the firewall, unplugged my router and modem, disconnected the printer, tried to implement on its own IP address. The installation wizard finds her and tries to implement, but I only get the message that it was a "network installation without success.

  Has anyone experience this problem?

  Any new ideas on troubleshooting are welcome.

  Thank you
  Liz

  Hello

  Thank you for your comments. I didn't expect such a quick response, which was great.

  I move the printer to get a signal 'excellent' and tried the other steps you listed.  Through some googling more, we discovered that we needed to do the following:

  Go to the control panel

  Select Printers and faxes

  Right click and select Properties

  Select the Ports section

  Add the port to the IP address of the printer displays

  Not sure if this is the ideal way, but of course, it worked and I am now a happy customer. Hope it helps someone. I'll still Bravo for having responded so quickly.

  Thanks again!

• HP Officejet 6600 increase beyond 5 for the fax rings

  Hello

  My client has an OfficeJet 6600. They share a phone and fax line. The rings maximum we can adjust the machine answer the fax is 5. If my client does not pick up the phone in time, the fax is there first (and this happens often).

  The manual indicates the number of rings depends on the region (here in Belgium).

  Is there an alternative means of information the rings to 8 for example? He found a way to do it with the Officejet 6500 on this forum, but it's another machine.

  Thank you!

  @Bonobobob, sorry, there is no way to surpass the RINGS to ANSWER to the maximum numbers that is allow. Some printers have 6, as for you, it is 5. This is as far as possible.

• OfficeJet 6600 - reports HP Connect "problem with the printer.

  I just bought an all-in-one OfficeJet 6600 and immediately installed on my MacBook Pro. Installation went smoothly, and I used it for scanning and printing. I am very happy. However, I noticed that HP Connect reports "Issue with printer." Well, it worked fine, so I ignored the error and continued to work.

  Tonight, I have installed the printer on a Windows 7 laptop. At HP Connect, it is always now reports "Problem with printer." That's it - no further details and no symptoms of any kind of problem. How to diagnose the 'problem' and how to fix it?

  Hi there, I know this may seem illogical, but I wouldn't worry too much about the problem with the printer State message in connected HP. I saw myself sometimes, and I was able to print successfully from a mobile device to the printer which connected HP indicated that there is a problem. Have you tried to send a job by using either the application mobile ePrint or to the e-mail address of printers for the printer in question?

  On the Windows 7 machine, you can also download and run the HP print and Scan Doctor to confirm there is no problem with the connection to the computer on which is installed the software of the printer or the printer hardware. Be aware, however, that the application is compatible with the Windows operating system only, so you cannot run it on the Mac computer, but unless you are having problems printing from Mac to the printer, there is no reason to suspect that anything is wrong.

  Hope that makes sense, but post comes back with other questions.

  Best.

• Print in black ink only - HP Officejet 6600

  I have a printer HP Officejet 6600.  Is there a way to set the default value of print in black ink only?  Currently, I have to do it every time I print a document in the office/computer laptop preferences.

  What operating system? In general the settings changed in the folder printers 'stick', changed settings in an application apply only to the local instance of the application.  For example Windows 7: click Start, devices and printers, right click on the Officejet 6600, printer properties, select what you want to the default settings, apply, OK.

• OfficeJet 6600: HP Officejet 6600 will analyze a computer Windows 10

  I have a HP Officejet 6600 - H711a/H711g e-all-in-one printer. Since the upgrade to Windows 10, I was not able to scan to the computer. I am capable of copy and print without any problems. I've done several reboots, power disconnects and reboots and driver installs / updates, removing, re - install etc...

  HP Print/SCan doctor reports that it solves the problem, but it happens. Problem continues to exist.

  Hi Griso8V,

  The pictures help, thank you! Please check this page for the steps fix your connection scanning: Scanner network connection is lost (Windows).

  I realize that you already have some of these steps, but please follow all the steps in the order presented here.

  When you get to the step to uninstall the software, please go the extra step to ensure that the printer is removed from "Devices and printers" in the control panel.

  When you reinstall the software, be sure to choose the full software and driver. If you are installing the base driver, you will not be able to scan to PC on the printer control panel.

  Please let me know if this solves your problem,

• Cannot print from Windows Photo Gallery, my new printer HP OfficeJet 6600

  I have a new range of printers hp officejet 6600 and you cannot print the photo in Windows Photo Gallery.  Called HP and they said that the computer does not recognize the printer.   Had a HP technical support to install this printer as I didn't have the right drivers.

  Thank you

  Caroline

  While you need? A pilot? Take you him to HP.
  http://WWW8.HP.com/us/en/support-drivers.html

  These are the support for all your windows 'Live' issues forums.

  If this it Windows Live Photo Gallery, you can get help here.

  Windows Live Photo Gallery
  http://answers.Microsoft.com/en-us/windowslive/Forum/Gallery

• Try to print, PC says he'll send an Officejet 6600 fax

  My HP Officejet 6600, which I had to reinstall because of a connection problem, calles herself now FAX HP Officejet of the 6600 in the PC.

  No way to print. My PC is a HP Pavilion h8-1030be. He continues to ask for a fax number.

  No idea how to set up the printer on the PC, in order to print when I want for that.

  In any case, I will try now to restart the PC and see what happens.

  Best regards

  Thanks for the update, Paul.

  It seems that the installation did not properly this time and I advise to remove the printer software.

  • Click on the start menu in the PC
  • Click on all programs
  • Open the HP folder
  • Open the folder for the Officejet 6600
  • Click the uninstall option
  • Once the uninstall is complete, the program will disappear.
  • Click on the start menu in the PC again
  • Click on devices and printers
  • Remove the 6600 if she is always present
  • Select any remaining printer by clicking once to the left
  • At the top of the window, click Print Server properties
  • Click the tab drivers
  • Delete lists of the Officejet 6600

  Once the printer is deleted, then re-install with the latest drivers from the HP website.  To access the downloads page for the 6600 click on the link below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-108845-3&cc=us&DLC=en&LC=en&OS=4063&product=5304873&sw_lang=

  This returns the printer to normal functionality?

• OfficeJet 6600: Officejet 6600 & compatibility of Yosemite

  Printer Officejet 6600 and Yosemite are entirely compatible? When I upgraded my MBP to the Mavericks, I lost some features with my old 5600.  I'm thinking of buying a new MBP and don't know if I want Mavericks or Yosemite. Now, I have the 6600 and I don't want to lose once again features.

  Hello

  The printer is fully compatible with Yosemite.

  Add the printer to your Mac in Printers & Scanners, the latest drivers will be installed from Apple servers.

  Then install the HP Easy Scan and you will be provided with all the features such as the OCR, Panel before scanning, etc.

  The HP Easy Scan application can be installed from the following link:

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Concerned,

  Shlomi

• OfficeJet 6600: print head

  I'm having with my printhead on my Officejet 6600 I bought a little over a year.  I had to replace the print head twice on my last HP printer.  Is this a common problem with Officejet printers?   I don't know if I should replace the print head or buy another printer from another manufacturer?

  Hello

  OfficeJet 6600 doesn't have a replaceable print head.

  IAM surprised to read in your post that you had replaced the printhead twice.

  Problem with printhead would lead to service the printer.

• "HP printer Assistant" for HP Officejet 6600 WON 'T run.

  Windows 7 64 bit

  NO error message

  NO changes to the system until after it started then improved then just put update HP firmware

  It worked yesterday.  When you have selected the "HP OfficeJet 6600" desktop on the desktop shortcut, he ran a sreen which allowed you to print, scan, fax, showed levels of ink, etc.

  Now: he comes up with a window of 'Control Panel\Hardware and Sound\Devices and Printers\HP Officejet 6600' that offers you 4 choices and the one that seems to offer printing/scanning, IE. "HP printer aSsistant"... which has no effect when you select.

  IF you right click on "HP printer Assistant" on this screen, it gives you the possibility to make a shortcut.  The shortcut created and has properties where the 'target' is never developed so that you can not even say that he's not trying to run.

  Upgrading of the Roque?

  

  Hello world!

  I called customer service and talked to a nice girl named Stephanie.  She was very helpful and tried exactly the same things I did the week last with the same results...  However, I decided to do another printer to the printer from my last more (410).

  I sincerely advise guys to call directly, and your product is new, you will get a very good support and give advice on what to do.

  We get a new printer and expect us it to work and HP understands that - simply call and your problems are more likely to be resolved here.

  Guys good luck and I hope I never come back on this forum (I got a 2 year warranty on my new printer for $ 1)...

  Ciao!

  Suzie