HP Officejet 7612: Also how wireless connect my laptop to my printer? (Already connected Dell desktop computer)

Similar Questions

• Is it possible for my laptop to share its wireless connection, my desktop computer can get online with it?

  original title: connect 2 pc set and used for wifi

  Yes iam trying to conect my desktop pc to my laptop which gets very good WiFi and use it as a host you for my office and use the laptop computer wifi also to desktop PC is possible

  Configure your router to allow the Office to have a wireless connection. And make sure your desktop has wireless capabilities.

• How to connect a second computer to dynadock U3.0

  How to connect a second computer to dynadock U3.0

  Hey Wayne,.

  For more details on how to connect a computer to the Dynadock U 3.0, contact Toshiba support.

  http://support.Toshiba.com/contact

• My wireless on my laptop will read the files on my desktop but I can't connect to the internet, my lapto electrician iI unless other computers work well

  My wireless on my laptop will read the files on my desktop but I can't connect to the internet, hard wire my laptop iI unless other computers work fine

  The following diagnostic information:

  1. Connect your laptop wireless so that you can "read the files on your desktop."
  2. Open a command prompt window (start > run > cmd > OK)
  3. Type the following command in the black command prompt window and press enter

     ipconfig/all > "% userprofile%\Desktop\testdata.txt".

  4. Let the window open orders and "hard wire" your laptop to connect to Internet
  5. Type the following commands in the black command prompt window and press ENTER after each one

     ipconfig/all > "% userprofile%\Desktop\testdata.txt".
     Notepad '% userprofile%\Desktop\testdata.txt '.

  6. Copy and paste the contents of the testdata.txt file into your answer here

  Please note that there are 2 for the second command ipconfig > characters.

  You can close and remove testdata.txt (which is located on your desktop) and close the command prompt window.

• Issues with Dell desktop computer wireless and D-Link wireless network card. Only able to get wireless access by checking "Use Windows to configure my wireless network". This kind of file sharing impossible.

  original title: can't see the computer on wireless internet!

  I hope that's not too much detail, but I would like that the sequence of events to be clear...

  I have a Dell desktop computer that's probably six or seven years now.  It did not come with a wireless card, so I bought a DLink router and combo card wireless, install both with the DLink software.  It works beautifully.

  Later, we through my rep AT & T DSL, I got a Motorola modem/router with wireless capabilities.  I had plugged directly on my computer Dell desktop and moved to a Dell laptop DLink wireless receiver.  No problems.

  The Dell laptop is dead and the DLink receiver has not been used for a long time.  Family of my daughter moved to our place, and I have connected his desktop computers and laptop to wireless internet, using the Windows Connection Wizard.  Still no problem.

  I got a new ASUS laptop, I also linked using the Windows Wizard.  STILL no problem.

  Now, here's the problem comes.  I moved the Dell desktop computer, connected the DLink wireless receiver to it and I am able to get wireless access ONLY when I go into the properties of PC, click the wireless networks tab and check the "use Windows to configure my wireless network" box.  Then I can connect correctly, but I don't see this computer on my wireless network.  Bad luck... because I want to be able to access share files.  When I try to connect using different assistants of Windows, I get a message to the effect that, if I used another software to connect to the program, I can't use the Windows Wizard.

  So, what can I do to remove the original configuration of DLink completely and to connect to my wireless network using the wizards in Windows?  I uninstalled the software of DLink, but it seems to have no effect at all.

  BTW, Dell desktop computer is running XP, office computer of my daughter is running VISTA, and two laptops are equipped with Windows 7.  I can see all the computers on the network with the exception of the original Dell desktop computer wireless.

  Any help would be appreciated!

  Hi Joe and DonnaLoth,

  The network will have to be changed to allow the computer Windows XP join a workgroup.

  How to change a computer name, join a domain, and add a computer description in Windows XP or Windows Server 2003

  You can also read the following article.

  Networking of computers running different versions of Windows

• Dell desktop computer just ran scan & system - failure of the card mother how fix this?

  Hi, I have a Dell desktop computer that came with an Epson printer & all the other necessary things: keyboard, mouse, speakers, & flat screen.  I bought it in 2009.  I'm on social security, so I can't afford to buy a warranty with Dell, which missed.  My system works fine.  Dell offers, free of charge, a scan to check the memory card mother and other issues.  I do the scan every month.   It was record past in all categories.

  However, I just did a scan on July 6, 2013 and the analysis of response of the system said failure in red.  Then he said: 'mother' I know refers to the hard drive.  I am over 65 and fairly low tech & live alone.  However, I am pretty savvy, computer or as much as I can be.

  I checked the help MSN menu, but could not follow him.  This is why I post my question on the MSN Community forum, which helped me with other problems in the past.  I have also just posted on the Dell forums.  I have MSN as my homepage & use IE 9, it works best for me.  The only email I have is on AOL and I've been there for years without any problem.

  I have Verizon FIOS; If I can't get an idea of how this problem on the forums (in fact, I prefer MSN forums) I'll call them.  They offer free advice by telephone.  If necessary, they will come to my apartment to check my system & require a rate SIGNIFICANTLY lower than the Geek Squad.

  However, I did not do anything to the system.  I have update printer drivers, since the printer has suddenly stopped working when I replaced the cartridges.  I don't think that this should be a problem.  I replaced the cartridges before.  I have an Epson Stylus NX110 printer/scanner/copier & called Epson, they SUCK.  The printer comes with the computer.  I have installed new drivers & the printer works fine.  I do not have a wireless system, & I don't have a digital camera.  The only other conflict can be I have two Microsoft Security Essentials AND free AVG downloaded as my anti-virus, anti-spyware.

  I know that the new drivers, I installed the printer were great, it was an update of Epson which I figured out.  I as well need the computer & printer. I am disabled & only at home much & this is my link with the outside world.  I do a little writing & letters print & printing (Yes, postal mail) to friends & also letters to additional government assistance of my State & County.  I appreciate all the advice and I'm sorry it's so long.

  One last thing: I keep getting pop-ups from this survey company called five votes.  I have tried everything to remove them, but they reappear.  I do not take surveys & I get rid of pop-ups.  I have my Blocker on MSN and AOL.  Could these pop-ups have corrupted my hard drive? I've been doing them for months, it is very likely.

  Thank you, Karen

  Hi, I have a Dell desktop computer that came with an Epson printer & all the other necessary things: keyboard, mouse, speakers, & flat screen.  I bought it in 2009.  I'm on social security, so I can't afford to buy a warranty with Dell, which missed.  My system works fine.  Dell offers, free of charge, a scan to check the memory card mother and other issues.  I do the scan every month.   It was record past in all categories.

  However, I just did a scan on July 6, 2013 and the analysis of response of the system said failure in red.  Then he said: 'mother' I know refers to the hard drive.  I am over 65 and fairly low tech & live alone.  However, I am pretty savvy, computer or as much as I can be.

  I checked the help MSN menu, but could not follow him.  This is why I post my question on the MSN Community forum, which helped me with other problems in the past.  I have also just posted on the Dell forums.  I have MSN as my homepage & use IE 9, it works best for me.  The only email I have is on AOL and I've been there for years without any problem.

  I have Verizon FIOS; If I can't get an idea of how this problem on the forums (in fact, I prefer MSN forums) I'll call them.  They offer free advice by telephone.  If necessary, they will come to my apartment to check my system & require a rate SIGNIFICANTLY lower than the Geek Squad.

  However, I did not do anything to the system.  I have update printer drivers, since the printer has suddenly stopped working when I replaced the cartridges.  I don't think that this should be a problem.  I replaced the cartridges before.  I have an Epson Stylus NX110 printer/scanner/copier & called Epson, they SUCK.  The printer comes with the computer.  I have installed new drivers & the printer works fine.  I do not have a wireless system, & I don't have a digital camera.  The only other conflict can be I have two Microsoft Security Essentials AND free AVG downloaded as my anti-virus, anti-spyware.

  I know that the new drivers, I installed the printer were great, it was an update of Epson which I figured out.  I as well need the computer & printer. I am disabled & only at home much & this is my link with the outside world.  I do a little writing & letters print & printing (Yes, postal mail) to friends & also letters to additional government assistance of my State & County.  I appreciate all the advice and I'm sorry it's so long.

  One last thing: I keep getting pop-ups from this survey company called five votes.  I have tried everything to remove them, but they reappear.  I do not take surveys & I get rid of pop-ups.  I have my Blocker on MSN and AOL.  Could these pop-ups have corrupted my hard drive? I've been doing them for months, it is very likely.

  Thank you, Karen

  First of all - the 'motherboard' does not mean 'hard drive '.  This means that the "mother".  :-)  The drive is the storage processors is the brain and everything connects through... the "mother".

    
  Second - why sweep you all the months?  Unless you are having a problem - well - I suggest you not to do so.  Heck - you may see a false positive.  Do you have any indication that you have a hardware failure?
    
  Here's what I suggest:
  (1) stop the execution of this "free scan of Dell.
  (2) ensure that the drivers of motherboard, video card, network device and peripheral chipset audio are later you can get - on the Dell site for your specific Service and operating system combination label (drivers and downloads section, use your service number and put in the operating system you are using.)
  (3) never use Geek Squad.
  (4) what is the "MSN Help Menu?
  (5) choose AN antivirus software - two is misguided and may cause problems.
  (6) run some scans of malware with the details, I will give you right after that...
    

  Regarding AntiVirus - free are very good: Avira, AVG, Avast, UnThreat

  You could spend ~ 60USD during two years of eSET NOD32 AntiVirus (not more - just product AntiVirus) and which would be more worthwhile.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner. Remove everything it finds.

  Reset.

  The less you have to run all the time, most things you want to run will perform:
  

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know using Google (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  For the printer - you have downloaded and installed the form here?
  https://www.Epson.com/cgi-bin/store/support/supDetail.jsp?OID=128284&infoType=downloads&platform=OSF_W_7-64

• OfficeJet pro 8620: how to connect my laptop directly to my officejet pro 8620

  Hello

  I appreciate what may be a simple question so apologies in advance!   I've been printing for a while but now need to print directly from my laptop without using the wireless connection wireless.   Please can you advise how to do this?  I tried to plug in an ethernet cable but it doesn't seem to work, and although I tried to look online guides, that I can't find an answer that works in EEM.

  Thanks in advance

  Hello

  Thank you for using the HP Forums.

  You can use a USB cable to connect directly to your printer.  (do not connect the USB cable first! Read more on how to add a new printer (connection))

  You will need to install the software to add the extra connection.

  Assuming that you have installed the FULL features software, follow these steps to add the USB connection:

  1. click on start. Programs > HP > HP Officejet Pro 8620 > click on the printer

  (you can also click the icon of the printer on the desktop)

  2. This will bring up the HP printer Assistant

  3. go to "Tools" > Device Setup & Software

  ("Note: this is not available in step 1: Device Setup and software")

  4. connect a new printer.

  5. DO NOT connect the USB cable until you are prompted to do so by the software!

  Once installed, the USB should be the default printer.  If you want to print using the wireless again, you will need to select the correct printer with wireless as a result.

  Hope that helps!

• OfficeJet Pro 8500 a909g wireless connection problem

  I have a printer wireless OfficeJet Pro 8500 a909g.  My PC is Windows 7 (64-bit).  Recently, the printer wasn't working reliably and we took to reboot our router frequently at the same time.  Router problems seem to be solved because my PC at home and the work laptop are well connected and running.  However, the printer would not work last night when I really needed.  The documents would appear in the queue, but never reach the printer.  Today, I uninstalled all the software of HP using the CD of origin and reinstalled all the latest software and drivers from hp.com.  Of course, I rebooted the printer several times during this process.  Using the Network Wizard wireless via the screen of the printer, I am able to locate my SSID and enter the WPA key.  The printer confirms that it is connected to the network.

  If my computer and printer are both connected to the same network why can't the HP software locate the printer?  Whenever I try to run the installation/Setup program it tells me that there is no HP printer on the network.  As I said, this printer has worked on this wireless network in the past.  I also downloaded and run the scan HP and difficulty of the program to see if she could solve the problem without success.

  Any other suggestions?

  Well, what I'm going to make you, it's just a basic uninstall and reinstall the printer. I'll describe the steps and you are right, we can use the USB > wireless Assistant. You can access that by running the software after the installation of the USB. Here are my steps...

  First of all, if you use a USB cable, be sure to remove it. Do not plug it in again until the software instructs you. Through devices and printers, programs and features and issues Device Manager and make sure that all copies, files, and programs related to the printer are removed. As indicated, and then restart the computer.

  The START menu type "%temp%" and press on ENTER. Here, I want you to press Ctrl+A and press on REMOVE. Some files you cannot delete them, ignore these files and delete the majority that allows it to.

  Follow this link to download full feature software and drivers of the printer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=3752459

  Install and let me know the result!

  In addition, here is how you set a static IP address: allocating an address static IP to your printer of HP Wireless - Windows 7 - YouTube

  Have a great day!
  

• HP Officejet 4500 G510n-z Wireless connection print Windows Vista, but not from Windows 7

  Printer HP Officejet 4500 G510n-z seems to be connected to my Dell laptop with Windows 7 on HP Solution Center page, but does not print. Documents just get stuck in QC. It was printing then it wasn't so that's when it wasn't. The printer works when I print from a laptop more old Vista. The last time this happened, I uninstalled and reinstalled the HP software and that doesn't seem to help. Then, for some inexplicable reason, impression began to work. It has now stopped working again. I can scan the Windows 7 laptop but not print. I tried all the troubleshooting tools that I could find without success. Thanks for trying to help.

  Hello-

  It could be caused by a couple of things:

  1. firewall on PC or router.

  2 interference (microwave, cordless phone base @ 2.4 Ghz)

  3 distance from router

  4 corrupted printer driver.

  Turn off the firewall you have and you move anything that can cause interference to router.

  If none of the above solves the problem, I'll have to install a different printer driver.

  Click Start.

  Go to devices and printers.

  Click Add a printer.

  Add a local printer. Create a new Port, then choose "Standard TCP/IP port.

  Click Next.

  TypeRegeditdans in the box 192.168.1.12 IP address or host name. (uncheck the box 'Interrogate the printer')

  Click Next.

  When the printer list opens, click windows update. (it takes a few minutes)

  After the box appears, choose HP (not Hewlett Packard) on the left and choose "Deskjet 990c" on the right.

  Click Next, the default value and end.

  Try to print using the printer Deskjet 990c.

• Disconnecting wireless connecting wired desktop HP - WRT350N

  Hello
  I have the problem that I can't solve.
  Everything worked great until I bought the new laptop with map N.
  My previous Setup was: WRT350N, wire connected desktop HP 1 GB, wire connected Dell computer laptop 1 GB, HP printer connected 10Mo wire and connected wireless laptop IBM 802.11 g (all running XP).
  With this configuration all was working fine until I bought new Sony Vaio with N (Intel) card and Vista. Initially it connected without a lot of problems, but only with the speed of G (the Office was off). I made some changes in the configuration of the router - past from WEP to WPA2, band radio to wide etc. Result - worked well with speed N.
  Next day I couldn't connect via radio by any way (which includes Vaio and IBM; Office lit up).
  I suspect me of Vista on the new Vaio so I started to install the patches, hotfixes, drivers, etc. Then I accidentally turned off the desktop computer, wireless started working.

  If the final configuration is like this:
  desktop computer is off - works wireless on two laptops, using N or not, in the work of wire connected Dell and printer.
  On office - Wireless does not work on two laptops, wire connected to Dell and HP printer work.

  What is going on?
  I already tried to reduce the speed of 1 Gb to 100 MB and 802.11n to 802. 11 g and the upgrade of the firmware on WRT350n (2.00.19).
  See you soon,.
  Andy

  Thanks for the reply Ricewind. No, I don't change the range of IP addresses. But I discovered what my problem was.
  I had a low price (and quality ) Bluetooth dongle on my HP desktop. He was jamming of wireless connections when I turned on the PC.
  It has worked before with only a laptop and G network but when I set up the router for N, I changed the channel from 1 to 7 and turned on the radio 40 Mhz band.

  Removed the dongle, switch back to channel 2 with 20 Mhz band and everything works (I also had a few problems of range so I'm sticking with standard channel for now.)

  See you soon,.

• How to connect to the computer after having forgotten the password?

  Original title: PC return to me

  Hi, I appreciate any help you can give me here on this da - min pc. I had a password to get into it and I don't remember this "thing" so he used to let me in. How can I recover my pc thank you for any help you can give me

  Hello

  You don't tell us what operating system you are using.

  This is information from Microsoft for when you forgot your XP password.

  "How to connect to your Windows XP-based computer if you forget your password or if your password expires"

  http://support.Microsoft.com/kb/321305

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you will need to re - install Windows. »

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Other information above, we can not help you more with this.

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• How to connect on a computer after having forgotten the admin password?

  Original title: FORGOTTEN ADMINISTRATOR PASSWORD

  Help.  I recently changed my password of the administrator account to stop my brother enter my account and I forgot it and can't access my stuff.  Does anyone know how to solve this problem.  Everything I tried requiring a password for administrator, so Im stuck and can't get into my itunes account.

  Why not tell us your operating system when you ask questions here?

  You would save compel us to give more than one operating system solution.

  This is information from Microsoft for when you forgot your XP password.

  "How to connect to your Windows XP-based computer if you forget your password or if your password expires"

  http://support.Microsoft.com/kb/321305

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  See you soon.

• How to connect to the computer as I forgot my password?

  How can I open my files, an old XP computer runing who had a password, I don't have to remenber

  Hi JEN_3,

  Check if this article helps you to:

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  Note: Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the below sticky

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

• poor wireless signal from the router to the new hp pavilion desktop computer

  getting poor signal wireless to the router to the new hp pavilion desktop computer. router 10 feet away. Help!

  Wireless router works fine for the 3 most old cell phones in the office.

  I heard that desktop computers receive wireless signals, but also laptops.  Is there a solution out there for this situation, in that I am?

  Thank you

  Roland

  whatifu wrote:

  A geek at Best Buy told me to open the box and put a few sheets of Tin around the antenna inside. What do you think?

  Roland

  Hello

  Also my suggestion BUT you need to do, of course, don't let touch to the Platinum

  All the best,

• How can I load Adobe Acrobat 9 Pro on my new desktop computer, from my old computer?

  How load Adobe Acrobat 9 Pro on my new desktop computer, from my old computer?

  Hello

  And the Setup program itself, you can get it here: products download Acrobat | 9: 8