HP OfficeJet Pro 7590 - screen of the printer is in a foreign language?

Similar Questions

• OfficeJet Pro 8500 A910 a: the printer screen is locked on the "new cartridge HP installed.

  I tried powering off the printer and reinsert the cartridge several times as suggested. Printer will print from the computer or scan using the computer, but without the homescreen on the printer, you can make a copy or send a fax.

  OK by tapping on the screen of the printer does nothing. It should go to the home screen.

  The Firmware installed in the printer is LRP1FN1231AR

  Just turn off the printer has not solved the problem. I tried severasl times.  I tried a variant and it worked.  I replaced the 2 with the 'old' new ink cartridges. A new message appeared on the screen indicating that the cartridges were more ink.  I then reinstalled the cartridges 'new '. and received a message that "used cartridges have been installed. I then put off the printer using the procedure by the Doc and it worked. After the printer on the home screen appears allowing all features (copy, scan, fax and Apps) to work.  I printed a few pages in color before trying this, so my new cartridges have been used.

• OfficeJet Pro 6835: Problem with the print head - Oxc19a0003

  Just bought the Pro Officejet 6835 this month of April and now the print screen shows "Oxc19a0003, there is a problem with the printhead". Had tried a hard reset of the e power cord does unplugging and is still showin the same error. Can't find a number of HP support, I can call or chat online. Help, please!

  Hello

  Its unfortunate to see this error on a new pritner.

  The error appear while you were setting up the printer for the first time, before installing the ink? (Yes/no)

  The error appear while you have been putting in place of the printer for the first time, after installation of ink? (Yes/no)

  Can I know if you had printed a few pages before the error appeared? (Yes / no)

  The error appear as soon as you switched on the printer? (Yes / no)

  However, please call HP Technical Support for assistance.

• OfficeJet Pro L7590 cannot find the printer in the basic facilities and full.

  The HP solution center software has stopped working recently with my Officejet Pro L7590. The printer is connected to a wired network.  I uninstalled the software, downloaded the latest software to install driver from HP.com.  The operating system is XP. I tried to install the base and full versions of the software several times, do a full uninstall/scrub every time.  No package can find the printer.  I ran the residential network Diagnostic tool and it can find the IP address of the printer very well.  I can access the web page to printer very well.  I've successfully installed the drivers of the company and I am now able to print.  I then tried to reinstall the full version, and it would still not find the printer.  Another pc on the network is the center of Solution HP software installed and communicates very well with the printer. I tried to disable firewall Eset Nod 32 during the install and no change.  I deleted all the entries in the registry I can find for HP, but still can not get the full version of the installation of the driver to see the printer.

  What else can I try to succesfully reinstall the driver package?

  Sorry, you gave the wrong way...

  First of all if you still have Enterprise installed download and important work!

  1. uninstall all other instances of 8.3 or previous.  My recommendation would be to uninstall all software printer hp through Windows Add/Remove Programs if nothing else to start with a base line.

  2. download the Utlities "HP Software Removal Utility - IT professional use only" (don't worry, this stand-a-alone also works on computers). File name: OLProL7X00_Scrubber_8.exe

  3. Once you unpack the latter you will have a new window and down there are 5 files, you must run one at a time in this order.  Uninstall.bat, Unistall_L1.bat, Unistall_L2.bat, Unistall_L3.bat, Unistall_L4.  Make sure that each of them is complete before you begin the following.  Some of them open and close Windows Installer UN and there is a gap of about 10-15 seconds.  Some of them require you to press any key to close the window on the finish.

  4 REBOOT

  5 download if you don't have not already ch from the Solution of Driver - company it, basic features of HP software/driver-IT Professional use only (again it is ok, you want your scanner, printer, monitor, and HP Solutions software to work once again don't you?).

  6 install the filename Business Solution: OJProL7X00_enu_Enterprise_7.exe if you uninstalled all this will install without a hitch, but you may need to input manually by selecting the IP method, enter the IP address of the printer. It's where he then found my network printer, and he continued the installation.  Mine found via the method of IP but not automatic.  Finish the installation and give your computer a few minutes to finish in the bottom.

  7 reset.

  8. If you have a program that uses a scanner TWAIN as Adobe Professional, CorelDraw, etc. test your scanner.  Mine works now.  Leave the test program,

  9 download new version 8.3 software, the full version of all the 311meg of it!

  10. install this software 8.3.  You can get an error (I did) just do not send the report, but the key is the continuous software to install.  What the problem is that the software company alreadly installed a files "hp? 5. ?? "and the cant on write.  The amount of the fine. Now when you get to the point where he asks how you connect your printer, USB or wired/wireless select Wired and click OK.  This will bring you to a new screen that is simular to the last, but to the bottom is a checkbox with "continue with the installation, I'll add the material later.  Put a check mark in the box and click Next.

  Surprise! the Setup will continue installing all recommended software and complete.  Still finished once that there is still things going on in the background! then give him a few minutes to complete!

  11 restart and give a little time and you will see that the screen is the network printer and all software programs now work.

  12. the only thing I don't understand is this: the old software used to create printer drivers 2, one for the printing of paper and other fax directly in applications.  The fax printer driver is no installation/configuration in this method, but I think that the Technical Support HP can guide you through this set up if necessary.  I'll do that tomorrow as it was something that I never thought or missed until it didn't work!

  I hope this helps! It did for me!

  Joe

• HP Officejet Pro 8600 Plus: software the Printer Wizard does nothing and eats CPU

  Hello

  I currently have a problem with the HP printer Assistant software. I use a HP Officejet Pro 8600. Well I uninstalled and reinstalled several times, redownloaded the latest version of the software from the HP site, tried with a wireless connection and a USB connection, but still have this same problem.

  The problem is when I open the printer to the printer Assistant software (scan, definition of printing preferences, etc.) nothing loads and what I noticed is that in the Task Manager, the program is constantly, nonstop to duplicate in the Task Manager and eventually slow down the computer because of the high use of the processor of these duplicates. I can't stop these processes in time compared to the amount of tasks in doubles at this very moment, and the only way to stop it is to restart the computer. I had this problem with Windows 8.1 and so I've upgraded to Windows 10 but exactly the same problem occurs. If I wait long if I get an error (0xc0000142) telling me that I can not load the Printer Wizard, but the process will still duplicate.

  I tried using the printer with other computers, but they do not have a problem by launching the wizard from the printer. I wonder what is happening and why is the Printer Wizard launch multiple neverending himself as tasks on the Task Manager?

  Add to that, printing works fine, it is train to launch the Printing Assistant software that is causing the problem.

  Hello @jellyjr,

• HP OfficeJet Pro 8710: Scan from the printer to laptop can leave laptop to the printer

  Hi I have problems with the new operating system for sierra on my macbook pro. I can manually scan from my computer to the printer and can print but when I try to scan from the printer, an error message on the printer, that is the counl scan could not be completed, make sure that the computer is connected to the printer and then try again. on the computer, the message is communication Scanner cannot be established make sure your device is turned on check the connection and make sure that your network is working properly if these conditions are correct restart the device and try to scan the image. I just had a llok in HP Utility under the menu fax and scan of the computer is not activated. The message asked me to go to support, but I downloaded the drivers twice and still it will not activate the scan of the computer. What am I missing to make this work.thanks for your help

  Hello

  Scan of the computer can be activated that the current software was conducted before Sierra.

  Software update should be available in the next few weeks to fully support the Sierra, for now just start analysis of your Mac.

  Kind regards

  Shlomi

• OfficeJet pro 8600: cannot install the printer Officejet pro 8600 on work network using HP on Win10 software

  I've recently updated my Surface 3 pro to win 11.  I try to install my printer using the HP installation software.  He worked with Win 8.1. The software has never been able to detect my printer automatically but in the past I could enter the IP address and it would connect.  This isn't the case, when I select wired connection, it just never fails to give me the opportunity to enter the ip address.  I can install the printer with the help of the W11 Control Panel, but the features of scan if the HP (HP printer assistant) software does not work it is frustrating for me.  Help, please.

  Kind regards

  Michael

  I found the solution to this problem.  You just need to run automatic installation wired function twice and then it will ask for the IP address.  Once I did this and entered the IP address, it worked fine.  It must just be an option to start or appear after a failure.  I had to let it fail twice has been confusing.

  Michael

• HP Officejet Pro 8600, assistant of the printer does not

  Windows 7 64-bit system

  Only recently purchased this printer, everything until the last two days has worked like a dream. However, for some unknown reason, the wizard of the printer now will not open. Have unloaded the program and reinstalled it, but it still not open. Last night removed the program and downloaded directly the drivers of HP, still not open.

  Someone else met this problem and if so what was the cure.

  Hello

  Try following the steps listed below, although the described problem is different, I think that should help with your question as well:

  http://support.HP.com/us-en/document/c03640384

  Please let me know the results,

  Shlomi

• My menu of the printer is in a foreign language, how can I go back to English

  My dell printer now has menu of foreign languages, very foreign.

  How to get back to English?

  I tried everything but nothing has changed this back.  Help.  Thank you.

  Hi Laurie,

  Click on the link below for the manual of your printer:
  E-all-in-one HP ENVY 5660 manual series

  In the manual says there is a NOTE on page 23, stating that if your printed documents are not aligned in the margins of the document, be sure that you have selected the correct language and region. On the printer screen, select settings, then select Preferences. Select your language, then region among the options provided.

  Kind regards.

• OfficeJet Pro L7590 show me the error on the LCD screen mini printer 'rear access panel is open.

  Hello

  OfficeJet Pro L7590 show me the error on the LCD screen mini printer 'rear access panel is open. How to fix Ica?

  Operating system is windows 7 but I do not connect to the PC again

  Please Help me ASAP

  Concerning

  Check the document I linked below. Let me know if it worked or not.

  http://support.HP.com/us-en/document/c01626835

• The HP OfficeJet Pro 8600 does support e-print? I am running Win 7 Pro 64-bit

  Can you please tell me: the HP OfficeJet Pro 8600 does support e-print?  I can't find or generate or figure out how to create an e-mail address for this printer.  Thank you.

  Hello BoPeepLamb,

  8600 printer OfficeJet does support ePrint. You can access the e-mail address of printers by allowing Web Services to the main display on the printer. The icon is located on the top left corner of the screen and looks like the sheet of paper with circles behind it. Before you can enable Web Services, you must ensure that you have a valid internet connection first.

  Once you have enabled Web Services, you should have a print sheet mobile printing with a printer code and the link to http://www.eprintcenter.com where you can create an account and customize your e-mail address printers.

  If you have any other questions do not hesitate to reply to this message and I'll try to find an answer for you.

• HP OfficeJet Pro 8600: HP OfficeJet Pro 8600, connected to the local network but does not print a printer on the same LAN

  HP OfficeJet Pro 8600, connected to the local network but cannot print printer on the same local network.

  Work tried fixing it but all attempts fail.

  Firewall disabled.

  Printer recognizes the router's LAN.

  Was also pointed out that the port does not communicate, can not remove it; Cannot add another...

  Printer does not print.

  How can I fix?

  Hi @AnnisMonadjem,

  Welcome to the Forums of HP Support!

  I understand that you are unable to print to your printer HP Officejet Pro 8600. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  When you say 'LAN', are you referring to the network or you try to share the printer on the network?

  How is the printer connected? (Ethernet/WiFi)

  If you have noticed that the port is causing problems, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  HP has several Officejet Pro 8600 series.

  What is the name and the product number of your printer? How can I find my model number or product number?

  • Update the firmware of the printer.
  • Don't hide the SSID (network name).
  • What type of encryption are you helping? HP recommends WPA and WPA2.
  • You have a double router broadband? Make sure that the two groups were not the same network name.

  If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  To assign the static IP address, use the following steps as a guide.

  • Print a Page of Network Configuration menu of the printer front panel. Note the IP printer. IPV4 address
  • Type the IP address in the browser to bring up the SAP.
  • Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
  • Select Manual IP.
  • Enter your IP address manual (192.168.0.232)
  • Enter 255.255.255.0 for the subnet mask, except if it is different.
  • Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
  • Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
  • Click on apply.
  • Restart the router, the printer and the computer.
  • Test printing and scanning.

  If the problem persists, download and run this patch rollup: resolving printing issues in Windows 7 and Windows Server 2008 R2

  • Try printing and scanning.

  In addition, if you are still having problems try the steps in this guide, HP printers - "offline" Status Message printer (Windows 7).

  Continue on, if the problem persists.

  Important!   Delete the temporary files and folders by using the disk cleanup utility

  1. Open the disk cleanup utility:

• OfficeJet Pro 8500. orientation of the page when printing double-sided it is backwards.

  OfficeJet Pro 8500. orientation of the page when printing double-sided it is backwards. How to change so when doc is printed can be read like a book?

  I don't know where to find and change settings.

  can you please help?

  Thanks in advance

  Anna

  Anna

  There should be an option in layout to "Flip on long edge" or "return on the short edge.  Change this setting to change the orientation of the back page.

  If this does not resolve the problem that, please indicate what operting system you have and the number of exact model.

  

• Cannot get the HP Solution Center to load for officejet pro L7590 all-in-one printer

  Unable to get the HP Solution Center to load. Have an officejet pro L7590 all-in-one connected wireless (through the router) on my new computer Windows 8 but had to deceive it calling it a direct connection.

  I have a new computer with Windows 8.  I managed to get my HP officejet pro all-in-one L7590 printer connected and working with software downloaded from HP.  During installation it placed an icon on my desktop (the old format disktop I love) to the center of HP solutions, but when I try to open the Solution Center a message indicates that the installation is not complete.  When I try to install more software it brings back me to the orginal installation and indicates that the device is already installed.

  I want to clarify again once my choice of installation was directly connected even if it is wireless via a router.  It was the only way I could make it work.

  The Network Configuration page was just that you will find the IP address, but you have this.  It is not as important now.  Now that I've shown you a method to help you analyze let us begin the process is not easy to get the Solution Center works again.

  I was very happy to find an official document on your computer Windows 8 and the solution Center.  I think this should help you when you select your operating system on this page.  It is titled "The scanning device estintrouvable and other related errors" and will be a little better explain what you need to try to get the Solution Center to work once again, I am.

  Let me know if you have any questions concerning one of the steps here and I will do my best to answer those as quickly as possible. I do not know a few things to do if it does not, but it is certainly the best advice to try first.

• Laser Jet MFP M125nw Pro: Screen of the printer printer Laser Jet MFP M125nw Pro

  Somehow the language on the printer screen has been changed from English into another language.  How is - a change the language?  More generally, how you navigate the various options in this displayed on the screen of the printer?

  I actually solved the problem myself next guests of LCD and more or less guess what was the English translation. Took a bit of guessing, but I found myself at a time when 'English' was an option to select. I'll keep your solution on file in the case where we mess up once again a parameter. Thank you!