HP Pavilion 14-AL022TU: can I replace HP Pavilion 14-AL022TU HDD with SSD?

Similar Questions

• Replacement of Pavilion g7 - 2233cl HDD with SSD?

  I have a Pavilion g7 - 2233cl that the HARD drive has failed recently, was planning to move to an SSD. I'm trying to figure if the SSD I look is compatible with my machine.

  This is a link to the product on Amazon.

  http://www.Amazon.com/SanDisk-solid-state-drive-SDSSDH-060G-G25/DP/B005F3000W/ref=sr_1_1?s=electroni...

  Thank you!

  I can't recommend a disk of 60 gigs. A base installation of Windows will run about 20 concerts and you have hibernation files and to restore files, applications (MS Office is 10 GIG more) and these and before you know it the drive will be full. You actually can't fill 100% so the actual capacity is above about 55 concerts. Yes, I'll tell you get a 128 gig. Here's a concert 128 for not much extra money:

  http://www.Newegg.com/product/product.aspx?item=N82E16820211719

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• can I replace my dv7 6b55dx standard keyboard with a backlit keyboard?

  Hello

  Can I replace my dv7 6b55dx standard keyboard with a backlit keyboard? I need to replace one way or another that the keys are no longer visible and would loe a weirdo. Any help would be apprecited.

  Thank you

  Deborah

  Hello Deborahross22,

  You are those who need to replace the keyboard on your laptop.

  I'm not able to find the keypad that is backlit for your laptop, but if you can find one that matches it will work.

  Here is a link that will show you how to replace the keyboard and the part number for the original keyboard.

  By clicking on the White Star congratulations on the left is a way of saying thanks!

  I would like to know how everything goes.

  Nice day.

• How can I replace my app on iTunes Connect with a new version with air for iOS and app Loader?, how do I replace my app on iTunes Connect with a new version with AIR for iOS and the Application Loader?

  How can I replace my app on iTunes Connect with a new version with air for iOS and app Loader?, how do I replace my app on iTunes Connect with a new version with AIR for iOS and the Application Loader? I got an error that the version number needs to be updated. I created a new record in iTunes Connect with version 1.1 and I took ownership of my current app 1.1 in air for iOS section in Flash.

  Check your descriptor file to make sure that it shows the updated version, too.

• Can I replace my computer laptop vga 320M with an another one high dx11?

  Hello

  Can I replace my laptop ' HP Pavilion dv6t-2300 CTO Entertainment Notebook PC "graphics card 'nvidia geforce gt 320M' with an another one high dx11?

  Hello

  Your graphics card is integrated into the motherboard, and therefore, is not an evolutionary element.

  Kind regards

  DP - K

• Can we replace the primary codec CTS 3000 with CTS 1000 codec

  Hi all

  Please correct me if I'm wrong.

  Physically CTS 1000 codec and CTS 3000 Primay Codec is the same air, I would like to know what is the difference between the two codecs.

  Suppose if I replace the main codec CTS 3000 with codec CTS 1000 it'll work?

  The difference is only between the firmware... ??

  If I try to download the firmware CTS 3000 in CTS 1000 codec does?

  Also add codec CTS 1000 in CUCM as Codec CTS 3000?

  Kind regards

  Nikhil Jayan

  Nikhil,

  Are the only thing you need to know about 2 codecs GEN 1 or GEN 2. On the GEN 1 all the microphones connect to the primary codec. On the Gen 2 microphones connect through the audion expansion area. You can see the difference on the codecs on the Gen 2, you can see 1 connection for the Center microphone and a connector square for the cable to the AEB.

  Other codecs are exactly the same. Endpoint gets its configuration file in Communications Manager. So once go you MAC address and restart the endpoint it will go the new configuration file. If you use a CTS Manager, you will need to go into the Application user in the CUCM and move the MAC address of available for controlled devices. You will then need to make a discovery of the room in the CTS - Man.

  The firware for both codecs are the same.

  I hope this helps out.

  JD King

• How can I replace an old site (unknown host) with a new site of Muse?

  Here's my situation:

  I want to start by webdesign for more money while studying. Now, I did a nice site for a doctor (he is not yet informed) that actually has an ugly home page. So I intend to offer my website, including the replacement... but I don't have an idea how to replace an old site (leave a host I don't even know at this time, but I know...) with a new one.

  So my questions here:

  Should I ask him?

  What is the FTP?

  How can I replace the site?

  Thanks a lot for your help.

  Greetings,

  Vicky

  Hi Victoria,.

  If you are completely redefining the site, you can delete all files from the assistance of the host server, and then download a fresh site using the Muse ftp credentials.

  Kind regards

  Akshay

• Replace the HDD with SSD boot disk and use the disk HARD now as secondary storage

  I would like to replace my dv7 - 6143cl HDD with a SSD boot drive and using the OEM HARD drive as secondary storage.

  I have the SSD and the caddy

  I need to:

  delete the original OEM HD

  Install the SSD

  install OEM HARD drive in secondary Bay

  Install Win 7 (I don't have install disks - what is on the HARD drive in his backup partition)

  or I have to

  delete this HD

  Install the SSD

  go into the BIOS, and then assign him drive in AHCI (etc.)

  Install Win 7

  install OEM HARD drive in secondary Bay

  etc.

  I want to dual-boot, if possible, but I think that the second HD (start-up disk) does not start, even if I change the settings in the BIOS

  is this true?

  Pavilion dv7 - 6143cl

  I7

  8Gb

  Win7 (64)

  Thank you very much

  Hello:

  Your BIOS is set to AHCI (or RAID) by default. It cannot be changed.  Look in your device manager and in the IDE ATA/ATAPI controllers section, look to see if there is a controller SATA ACHI he.

  If so, you have an AHCI BIOS default.

  If you go further down the line in Device Manager and see a section of storage controllers, click on that, you would see a SATA RAID controller and your BIOS is set to default RAID.

  I don't have your model laptop so I don't know if HP has implemented some models double disk RAID or AHCI.

  So... First, copy your original C:\ drive SWSetup folder and save that to a portable hard drive. That must contain all the files installation for the drivers and the software provided with your PC. You can search this folder for programs that you may want to reinstall after your new SSD drive HARD primary.

  To install W7 on your SSD, check your own install of W7 disc.  Here's how:

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Can't answer your question on the dual boot as I never did before.

  Paul

• Guide: replace the HDD with SSD, Lenovo Y480

  Lenovo
  That's how I replaced my HDD with a SSD in my Lenovo Y480. I did it immediately, so there is no user file to consider. I used a key from Lenovo recovery. Read this guide in its entirety before starting.

  Execution time: about an hour.

  Items, you will need:

  -Y480 Lenovo

  -New SSD (I chose a Mushkin Chronos Deluxe because my research lead me to conclude that it is the best available from June 2012)

  -Small Phillips screwdriver

  -Butter knife or similar to remove the HARD drive. There is not much space for your fingers in there.

  -DVD-r blank

  Step 1

  Turn on the computer.

  Step 2

  Write the number '1' on a blank DVD-R and insert into the optical drive.

  Step 3

  Press the small button just to the right of the power button. This launches a recovery key.

  Step 4

  Follow the instructions on the screen to make restore disks. I chose the factory restore option, which required three DVD - Rs. label each disc with numbers to let you know in what order to use them later. Once it is finished, place back #1 DVD into the optical drive.

  Step 5

  Physically remove the hard drive and insert the SSD drive by following the instructions below.

  1. turn off and unplug your computer, flip upside down.
  2. remove the battery.
  3. remove the access panel by removing the two screws and slide.
  4. remove the two screws that hold the hard drive carrier.
  5 remove the hard drive by lifting upward. There is a right angle SATA adapter plugged into the hard drive. This card just came out with the hard drive.
  6 disconnect the hard drive adapter and plug it on the SSD.
  7 unscrew the hard drive bracket and screw it on the SSD.
  8 put the SSD drive in the Bay, screw the support down and replace the access panel. Be sure to screw it up.
  9. replace the battery, lock.

  Step 6

  If you did not already the first recovery DVD in the optical drive, use a paper clip to open the optical drive and insert the diskette. Close the drawer, then turn on the computer to start the restoration.

  Step 7

  Select the boot drive by pressing F12 when you see the Lenovo logo during startup, and then select the optical/DVD drive in the list.

  Step 8

  Follow the instructions on the screen. The first time that I did, restoration impossible immediately, probably because of a missing partition. However, after restarting the computer by performing a battery pull, then continue to step 6 restore completed successfully.

  I have not compared this drive, but I can tell you that the Windows experience index is 7.9 and startup time is 24 seconds now. The base index is 6.8 for this system now.

  You will find that Windows has already helped TRIM. However, regular defragmentattion was still on. I think that the system restore has been disabled automatically.

  Good luck

  Matt

  I saw no option for this, and I was quite surprised, that he didn't do it automatically. I'm not an expert on everything, so what follows is a guess.

  Perhaps that if you create a partition on the SSD first, recovery will recognize and use it.

• Replacement X 220 HDD with SSD?

  Hi people,

  1 can you replace the built in hard drive on a X 220 with a SSD?

  2. If possible, where can I find instructions on how to do it?

  3. If possible, should be a tiny philips screwdriver - where can we got such a tool?

  TIA,

  SD

  1 Yes
  2 x 220 guide on the Lenovo site. No problem to install the new 7 mm or 9 mm ssd
  3. Yes, you will need a small scredriver

  I replaced the standard hard drive with ssd Intel 320 Series. The only thing you will need is tool of s/w for transfer system and the date on the new SSD. Another tool is to tweak Windows for the use of SSDS. Nothing tool you will need to charge Windows 7 install direct on the ssd.

• Instructions for the replacement of 1 TB of HDD with Samsung EVO 1 TB SSD in XPS 15

  Can anyone recommend a set of instructions to replace the factory equipped 1 TB HDD with a SSD 1 TB in a XPS 15 (9530, model end 2013)?  I thought it might be a simple case of the SSD HARD drive cloning and exchanging players, but when I did it I got an error message at startup saying that I needed to make a repair - I na not to note the exact error, but he asked for the Windows installation disc.

  I don't really want to do a new install of Windows from scratch, unless absolutely necessary.

  Thanks a lot in anticipation!

  Hi Paulemm,

  You must use the Dell backup utility and restore to prepare a set of recovery disks. Those can then be used to load the operating system on the new drive. This is the best approach.

• Z560 - replace the HDD with SSD - solved using OneKey Recovery

  Hey guys,.

  In a few days time Santa is put me an SSD, OCZ Vertex 3 120 GB.

  I think to clone the drive following this guide: http://www.ssdfreaks.com/content/664/how-to-clone-hdd-to-ssd-with-windows-7s-own-software and I'm a little confused on the partitions that are currently on the disk.

  I have:

  Local disk C: 552,55 gb,

  LENOVO 28.8 GB D:

  and a partition unassigned 14.75 GB.

  Does anyone know what contains the unassigned partition? I guess that's the One - Key recovery software? If this is the case, then I intend on deleting the D: Partition, which currently contains drivers, narrows the C:\ about 100 GB and cloning then the C:\ 100 GB and partition unassigned... will this work?

  Bravo guys!

  Rastaman

  Hey guys,.

  I got my Vertex 3 today and it is ridiculously fast. Totally recommend it if you can afford it. Anyway, I discovered how do I reinstall my laptop, and I'm going to ask you now:

  (1) One Key Recovery Opened and clicked on 'create recovery disk', followed by 'default recovery drive '.

  (2) thought - sod it, I'll just stay in my new SSD and see what happens. Inserted, set the BIOS to boot from the DVD drive, and then install windows.

  (3) gain?

  In fact, I found myself with

  C:\ 96,84 GB

  Partion unnamed (14, 75 GB) - this is the area of a key recovery

  Unnamed (200 mb) - partition likely etc boot sector reserved by operating system - seen elsewhere on other systems and is quite normal!

  So yes, that happened on a NEW SSD building, which had not been formatted before - OneKey Recovery did everything by himself.

  I hope this helps people in the future!

  Merry Christmas!

• Can I replace front usb 2.0 ports with 3.0 - if so how?

  I have a HP p6653w 64-bit with Windows 7 which currently has 2 usb 2.0 ports at the front.  I want to replace it with usb 3.0 ports but I don't know if I can or the steps to do if I can?  HP support told me to use Buffalo USB 3.0 PCI Express Interface Card for the replacement of back, but I have a drive hard toshiba laptop which has a cord usb very short, so I prefer to Exchange just in front.  Thank you.

  Hello

  All standard pins on the USB ports are the same.

  Kind regards.

• Pavilion dv 9500: replace the HDD with SSD HP Pavilion dv9500

  I want to improve my HP Pavilion dv9500 by replacing the HARD original with an SSD drive. Is that possible and Yes are there no specification of SSD and an adapter must?

  PaulB5 wrote:

  I want to improve my HP Pavilion dv9500 by replacing the HARD original with an SSD drive. Is that possible and Yes are there no specification of SSD and an adapter must?

  They should fit you will have to climb on your HARD drive cage if there is an and that you may need a spacer inserted as some SSDS have a spacer for the filling of vacuum.

• How can I replace the value of the column with a particular value in SQL

  Hi all
  
  Is someone can you please tell me how can I format my output with the replacement of a column value with a specific value that really depends on the current value of the column
  
  I am executing the following SQL statement
  
  Select state, count (id) from < table_name > where composite_dn = < composite_dn_name > Group by State;
  My current performance is:
  
  State Instance number
  1 3
  3 28
  
  I want to replace the value in the State column as follows
  
  No.OfInstances State
  3 filled
  28 faulted
  
  I want '1' to be reppaced of 'Done' and '3' is replaced by 'Faulted. '
  
  Is is possible with SQL or PL/SQL, if it is then how I can achieve this required. Help, please!
  
  Thanks in advance!
  
  Published by: Roshni Shankar on October 27, 2012 12:38 AM

  Hi Claude,.

  I guess this CASE clause can be simulated by a DECODE and also it is very easy to use.
  See - http://www.techonthenet.com/oracle/functions/decode.php

  select decode(t1.state,t2.state_id,t2.state_name), t1.count_id
  from  t2, (select state,count(id) count_id
   from 
   where composite_dn= 
  group by state) t1
  where t1.state = t2.state_id;
  

  HTH
  Vanessa B.

  Published by: Vanessa B on October 27, 2012 14:02
  -link added

  Published by: Vanessa B on October 27, 2012 14:19
  -added code sample