time capsule airport lose wifi range

Similar Questions

• How can I connect my Airport time capsule to my WiFi network so he just backup my Mac and not extend nor want to be a base station

  How do I connect/install my time capsule airport to my new WiFi network so she just backup my Mac and not to extend my WiFi or want to be a WiFi hotspot

  There is no way to connect a TC to a wifi network. It must be connected by ethernet to the main modem or to the router.

  I don't understand what you're asking...

  If you want that the backup more wireless computer... How the TC cannot work as Wifi hotspot... It's impossible.

• Using Time Capsule airport on 2 devices

  for some reason, I have a PET of brain here and do not understand this.

  My wife has a laptop computer macpro she does his grad school stuff on.   I have an iMac.   I also have the time capsules from the airport.  the woman is set up with time machine, it sends data via wifi to the time capsule. It is very good.  The mine records at the same Time capsule airport wireless.

  ME, I would use one different wifi router other than the airport on another network device I have, however, the question is: is it possible that I can keep the wifi for the operation of the Apple device and connect my computer via ethernet to the device for the back upward only, using the capsule on the imac.

  I think I can, but I don't want to screw up the wireless network.

  You can use both ethernet and wireless at the same time... but it becomes complicated with the gateway router and DNS values.

  Secondary wireless router should use another address LAN IP for the TC, so you can separate the two networks.

  This could lead to further questions about the network although because you must plug a router into the other I presume... unless you are completely isolate the TC from the internet or if you have in fact two internet connections.

  Give me the real details.

  What is the second router and IP is running?

  How is the installation of TC and what IP is running?

  Screenshots that make it easier.

  I did a write up with screenshots here, which will give you the basics.

  Time Capsule using wired for Mac for backup only.

• Time Capsule airport 10057 error: computer recognizes airport exists but cannot connect

  Hello everyone. I am currently unable to access the NAC on my Time Capsule Airport (not HQ one), as my password seems incorrect. However, this issue of mix, I am unable to connect using AirPort Utility at the Time Capsule airport in order to use a "soft reset". I can't push the button, but after that, it is impossible to actually access the settings from the airport using the utility.

  I'm on Windows 8, using the AirPort Utility for Windows 8.

  I tried the following:

  • every possible permutation of IPv4/6
  • a_l'_aide_de CTRL + SHIFT + O, and then perform one) I don't have the password and b) if I type in gibberish it gives me another error (-6753)
  • disconnect, reconnect, reboot, etc, etc.

  Just to be clear:

  • I know that the WIFI password
  • I know the old password to the NAC
  • I do not know how to change the password of the NAC
  • My shift caps lock is not on

  After a soft reset of the password is public... What have you tried?

  There is no password on the wireless for 5 minutes during the soft reset.

  In any case to fix... doing a factory reset full. No files are lost in the process.

  Start from a factory reset. No files are lost on the drive hard in doing so.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  Make sure you use ethernet to connect to the TC, not wireless. It tends to work better that windows wireless Gets a bit NARKY...

  If you don't know what that means NARKY... and I don't know what means NAC.

• time capsule airport cannot be opened because the original item cannot be found

  I just purchased a Time capsule airport and can't install. It flashes orange, and although that Time Machine backs up on it, and I can access the internet, I don't remember upward the back-up because I got the following error message:

  "'Airport Time Capsule' could not open the original item cannot be found".

  The printer is connected to the Capsule by USB works.

  I'm installing via an iMac.

  Help, please!

  Thank you

  You first need to determine what is at stake that indicates the LED "blinking orange.

  To make your iMac:

  • Run the AirPort Utility.
  • Select the Time Capsule
  • In the pop-up window, all questions will appear in the status section.

  Please post back your findings.

• How to restore all the data stored on my Time Capsule airport to my new iPAD Pro

  I have a Macbook air with a backup at a time Capsule from the airport.  The MacBook Air is dead (blue screen).  Now, I have a new iPad Pro and want to restore all the photos that have been saved on the Time Capsule airport to my iPad.  How can I do this?

  Connect the iPad Pro to your computer and sync photos to the iPad Pro.

• How can I change the name of the ion HD my Time Capsule airport

  My time capsule airport has changed its name to data and now I can't use it. What can I do?

  Not sure why you can't use 'Data' as the name of the disk hard Time Capsule, since it is the default value.

  But, if you want to change the name of 'Data' to something else...

  Open the AirPort on your Mac utility... (Finder > Applications > utilities > AirPort Utility)

  Click on the image of the time Capsule

  Click on edit in the window that appears

  Click the disks at the top of the next window

  Next to Partitions, you will see "Data".

  Click directly on the name of 'Data' and the box will change to allow you to edit the name, just as you can change the name of any other player

  In the example below, I changed the name of the drive 'safeguards '.

  Click Update at the bottom right of the window to save the changes you have made

  

• Hard, my time capsule airport is connected to my network. I also use it as my Wi - Fi. The time capsule disconnects from the network periodically and does not restore I have to restart to reconnect. What problem I have

  Hard, my time capsule airport is connected to my network. I also use it as my Wi - Fi and the backup. He constantly falls the internet connection and I have to restart the so he can reconnect. What problem I have?

  What brand and model of your Internet modem you have the Capsule Time (TC) by Ethernet? What exact model of the TC do you have? ... and who is your ISP?

• How to see files saved on my Time Capsule airport? All I see is the name of my hardrive.

  I have recently started using Apple's Time Capsule airport and use it for my Time Machine backups. When I used Time machine in the post with an external hard drive, I can go and see all the backups and individual files, if I needed to. However, with my new Time Capsule airport, I don't see the name of my hard drive. Is there a setting someone to reveal all the files and individual backups?

  If you want to see the files Time Machine has saved on your Mac...

  Click the 'clock' Time machine at the top of the screen of the Mac

  Click on enter Time Machine

  For more information about Time Machine, see this Apple support document: use Time Machine to back up or restore your Mac - Apple supported

  However, if you are asking how to see the files that Time Machine has saved time using the Finder Capsule...

  Click on the Time Capsule icon under the heading Shared in a Finder window

  A disc hard... named 'Data' unless you have changed the name... is displayed on the right

  Double click 'Data' (may asked you the peripheral Time Capsule password when you do this)

  Double-click the sparsebundle bearing the name of your Mac

  A reader named Time Machine backups will appear on the desktop

  Open the drive and go through the levels to find the files you want

• INSTALLATION OF TIME CAPSULE AIRPORT

  THE CAPSULE FROM THE AIRPORT CAN BE PLUGGED INTO A ROUTER/MODEM BOX OF COMBINATION OR WHAT I HAVE SEPARATED THE ROUTER AND MODEM?

  You can connect the modem/router combination in your Time Capsule airport

• I have 2 imacs and a laptop computer and you want to back up all three wireless via time capsule on my existing wifi network. If we can also use the time capsule as my wifi and replace my uverse wifi, that would be great. possible?

  I have 2 imacs and a laptop computer and you want to back up all three wireless via time capsule on my existing wifi network. If we can also use the time capsule as my wifi and replace my uverse wifi, that would be great. possible?

  If you want to make sure that you will be able to get the Apple support in case of problems or questions with your backups, you must use the wireless Time Capsule to back up your Mac.

  As long as the time Capsule provides a wireless signal, you can decide who to your 'main' network, then use it wireless Uverse for "guest", or children. If you do not need the Uverse router/modem wireless at all, it is possible to turn off wireless on the device and make it work only as a support modem/router...with Uverse wired.

  At this point, you can start thinking about how you want to configure things and get back in touch if you need some advice on how to do it.  We need to know what operating system that uses the Mac that you normally use to administer the time Capsule, provide good instructions, if you need it.

• I have a new time capsule airport. How to limit the search for who can use the time capsule backup process?

  I have a new time capsule airport. How to limit the search for who can use the time capsule backup process?

  Set a password to disk... disk tab in the utility... and just give to those you want to use the TC...

• Sounds of Time Capsule airport

  My Time Capsule airport is make screaming noises. Is this an indication that the drive should be replaced?

  Is - it stop shouting when the disc turns down?

  It can also be the power supply... but they tend to complain rather than shouting.

  What model is the most convenient airport? How old?

• Using a Time Capsule airport on a new wifi network

  I'm trying to connect my TC Airport to a new wifi network to another location. It worked very well at the original location, used to extend an existing network of wifi, connected to the router via an Ethernet cable. In the new location, I'd rather have a wireless connection. I have tried several times to do a factory reset full and then I see the TC from the airport using the Airport utility, but it does not put in place to extend the wifi network my iMac is on (he sees a nearby network as well). I just simply want to configure my TC from the airport most convenient to save my iMac! Any ideas? Thank you!

  The TC must either connect to wireless to another router from apple... or it must be connected by ethernet... he can't extend wireless any other brand.

  If all of the TC is to is to make backups of iMac... Plug it directly by ethernet on the iMac... and use this configuration.

  Time Capsule using wired for Mac for backup only.

  If you want to have as part of the network... plug in ethernet on the main router... and the backup more wireless... but it becomes a problem where the computer don't connect directly to the TC now.

• Airport Time Capsule 2013 loses Internet connection

  Hello! Help, please! Bought a new airport Time Capsule 2013, hung, everything works well, but it several times a day, disconnect from the Internet. Saves only the reboot. It is very annoying ((the provider said it sees it's requests on a regular basis but does not correct. Apparently she must ask for options and more them do not ask, and she periodically asks for new, but do not correctly. It is for the USA, and I am in Ukraine. I have a wedding? (((((

  Apple routers can be very problematic on some connections... You use PPPOE with any kind of modem? Apple routers have proved to be unreliable with this setup for some people. In particular the fiber connections simply do not work very well.

  For you help, we need to know what kind of internet that you have and the modem... brand and model may not mean a lot but the actual type, is it a pure modem or a router? Or do you not need a router at all. If it is an installation of fiber you plug straight ethernet of ONTARIO at the time Capsule?

  The demands of love.