HP Pavilion 14-v140la: pilot HDMI to connect to the display of the external monitor

Similar Questions

• Satellite P300 - randomly turns off the power when connected to the external monitor

  Hello

  I have a Satellite P300, Intel Core 2 Duo T9400 2.53 GHz, 4 GB RAM, ATI Mobility Radeon HD 3650 512 MB, running Windows 7 ultimate x 64.

  Recently, I bought an AOC v22 led screen and connect my conputer via HDMI. Everything works fine, but sometimes my computer off just randomly. I might have something to do with my computer overheating, so I clean the fan, but this was not good.

  I think it has something to do with the LED screen because my computer was never off his own.

  Hello

  So this also happens if you n t connect laptop to external display? So, you can determine what is causing this problem.

  If the computer laptop doesn t turn off without external monitor, you should try to update the BIOS and the display driver. Two updates that you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  You close the lid if you have connected the external monitor?
  What operating system do you use?

  In addition, it would be interesting to know how you clean the laptop. That's why I use the jet of compressed air that can blow the dust from the cooling fans and you don't have to disassemble the laptop.

  Good bye

• Tecra A10 - 1LL - connection with the external monitor

  Hello

  I have a problem with my laptop Tecra A10.

  When I connect to an external monitor to the laptop I have to manually switch the screens because external shows nothing. When I disconnect the monitor I have to pass the screens manually with FN + F5 because the internal display shows nothing.

  My old laptop (Tecra A9 (PTS52E-0E702NGR)) is the poster automatically whenever I connected or disconnected an external monitor.

  Anyone has an idea why the A10 light automatically as the old notebook? Maybe it's the only spot in the preferences of the display driver that I don't see right now. :-)

  Hi SilverWizard,

  What happens if you try to switch on the external monitor using the options of display driver, or that this combination of buttons don t work?

  As wrote Al - eX you must update tools from Toshiba to get the keys FN working again. Everything can be downloaded here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  It's working now?

• HP EliteBook 8440p does not connect to the external monitor using VGA! Help!

  As you can read by the title, this computer does not connect to an external monitor using VGA.

  It will be not just to record all monitors in the control panel.

  Can I change the resolution, change the color, etc.. But it will pick up any display.

  -This computer has a HDMI port.

  -The Windows key and pressing P make the ring of little blue loading appear for a microsecond before nothing appears.

  -VGA cable is brand new, double male, directly connected to my Panasonic Viera 32 ''.

  -In the properties of this computer is giving an error code that this computer has no drivers. (Code 28)

  After a repair, he says "device Base system has not a pilot.

  Can someone direct me to the corresponding pages for drivers or instructions? Any help would be appreciated.

  There is probably a combination of keys specific to your model that enables / disables the VGA port on and outside.  Look in high ranking a key with a marking saucy that some how is supposed to look like a monitor.

• MacBook Pro retina 15 inch heats up when it is connected to the external monitor

  Hello

  My problem: When I connect my monitor (LG IPS277L) temperature of my Macbook Pro starts to heat upward. This problem often occurs when I use Facetime.

  I found it really strange because I should have a pretty good Macbook Pro for this.

  MacBook Pro (15 inch, retina, medio 2015)

  Processor: 2.5 GHz Intel Core i7

  Memory: 16 GB 1600 MHz DDR3

  Graphics card: Iris Pro 1536 MB Intel / AMD Radeon R9 M370X

  El Captain 10.11.6 OSX

  I hope that someone recognizes this problem and wants to share their solution.

  When you connect to an external monitor, you use the AMD Chip for graphics (without the external screen, most of the software needs only the graphics engine Intel).  It attracts more power and therefore heats up.  All MacBook Pro for this to some extent.  This should be considered normal.  If the computer is actually overheating, it will stop.

• My compaq presario v6000 screen is totally blank but works fine when connected to the external monitor

  Hello

  I have the above equipped with windows vista, I have a totally white screen and have tried to shine a bright light and I see nothing.

  the OS is vista

  any ideas on what is the problem?

  Thank you very much

  Hi totallybusted,

  Try conecting an external monitor to the video output of your laptop connector. If you can see the video when you turn it on the LCD screen has failed. It must be rplaced to return your laptop to a usable state.

• Connection Mac Book Pro for 2 external monitors

  Hello

  I need help around to confirm if it is possible to connect 2 external monitors to a Mac Book Pro. I currently have a Targus docking station and it works for my work which is a lenovo but does not work for the Mac Book laptop. I bought the book of Mac in 2010, does not have a thunderbolt connection, but has a mini display port connection. The external monitors I have Samsung LU28E590DS/XY - 28 "UHD monitor with at least 2 x HDMI and 1 x Display port connections. Need to display a set up as main and the other scope.

  exactly, including more than 50 computers called MacBook Pro are you using? The more accurate description is by designation of MacBook Pro 6.2.

  What version of OS are you running?

  What model Targus Docking station? Which interface is used for this Targus Docking Station? What guarantee do you have with the seller that it works without problem on your Mac?

• HP ENVY on the dv6 hdmi port connect to the graphics card or onboard video?

  HP ENVY on the dv6 hdmi port connect to the graphics card or onboard video?

  Thank you!

  Hello:

  It is part of the audio HDMI graphics cards.

  Normally the Intel HD graphics card manages audio HDMI - even on Intel processors with AMD switchable graphics card models.

• Unable to connect to the external display

  Original title - Alienware m17X

  My function keys stopped working, I am tring to connect my Alienware 2210 monitor I hooked up and working before, my computer tells me that it is not connected. The HDMI is plugged into my screen and my computer. When I'm on my desktop and I right click for inside, click Customize my display settings that I click on that opens and then click on connect an external display and it says no connection. All this was that I have to type FN/F6 to change the display of laptop to external display. I know it's a setting I prevent my FN keys work, but I don't know how to fix it?

  Hi RandyHester

  1. what happens if you use the function keys?
  2. What is the exact error message that you receive when you try to connect?
  3. try you the office mirror or extend the desktop on the external monitor?

  Please refer to the below links and check if the information provided allows -http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-multiple-monitor-problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/understanding-multiple-monitors

  I hope this helps.

• ProBook 4530 s BIOS update fails - "...". the computer is not connected to the external power supply. »

  I made an update of the system to the original settings and everything seems to go as usual.  While performiong the many windows updates, I noticed that the battery indicator indicates "no battery installed.  I found a few solutions dealing with this problem (none of the other solutions worked) and that which is shown updating BIOS.  I checked and the BIOS is F.07 and the current version is F.41.  I downloaded the update and begun the process of Windows.  The system restarts to start the process, but when the BIOS updated starts I get the following message:

  "A significant update of the BIOS of the system is available, but the computer is not connected to the external power supply.  Please connect the external power supply and then press Enter to continue. »

  The computer is connected to the power of HP to the original address since it is the only way so he can turn it on.  I tried removing the battery and from the update only the connected power and get the same result.

  Either way, I tried to insert a different battery, I have more than one of these laptops.

  Sorry

  Please test the battery after boot press F2 HP Diagnostics

  http://support.HP.com/us-en/document/c00821429

  and calibration of the battery for laptop

  http://support.HP.com/us-en/document/c00817650

• Satellite P300 - display resolution incorrect if the external monitor is connected

  I wanted to use a monitor BENQ of WAP 2010 with my Satellite P300 laptop operating system is Windows Vista Home Premium 32-bit.

  When I connect it, the display resolution changes to an unusable.
  I installed the latest ATI drivers that I downloaded from the Toshiba site. Max screen resolution is 1680 x 1050. This resolution no longer exists after the connection of the monitor.

  Also, I can't set the correct resolution for the LCD display of the laptop more.

  How set up the screen, so that the monitor displays a clone of the LCD screen for laptop and find the correct resolution?

  Hello

  > Max monitor resolution is 1680 x 1050. This resolution no longer exists after the connection of the monitor.
  Please understand that not all possible solutions are supported by a graphics card chip or a graphics card driver.
  If one of the parts mentioned would not support this resolution then you will not be able to choose and use the external monitor!

  In your case, I recommend the manual of your laptop.
  There you can find a list of available external resolutions and supported.

  Welcome them
  Markus

• Satellite L40 - BIOS - the external monitor connection preferences

  Hello!
  I have some problems with the external monitor (CRT) connection for laptop L40 - 17O (PSL4CE).
  Matrix on it is broken. There is no windows installed.
  I connect external monitor, but I don't see anything. I heard that it is necessary to change something in the BIOS, but it's hard to do that without image =)
  Would be great if someone who has the same note would say what button to press to enter the BIOS and change the options in this way. Or perhaps someone could take a snapshot of the bios and its options.
  I'm looking forward to see answers)

  Normally it should be an option in the BIOS where you can choose, if it isn't the internal LCD screen, or both or is automatically activated after connecting a display to the machine.

  Under Windows, the combination FN + F5 does exactly what you need: it goes from the screen.

  Could you please check your BIOS and attention to the options in the form? I guess that basic finding. :)

  Welcome them

• Connect the external monitor to my Sony VAIO laptop Win XP

  Connect the external monitor to my Sony VAIO laptop Win XP

  thanking you in advance

  Connect the external monitor to my Sony VAIO laptop Win XP

  thanking you in advance

  Is there a question here?

  Read your manuals and find a way to use your laptop computer based on the instructions from Sony to connect external (including projectors) monitors for the laptop.  Usually a connection (as you said Windows XP where you have published, probably VGA) for the monitor and a few buttons to tell the laptop to mirror or extend the display to the second monitor.

• PC to tv connection error "no signal - check the connections and the external device is turned."

  Original title: pc to tv connection

  I have an Acer Espire Vista 32bits. Connect to a Panasonic TC L32x30 HD TV. The TV has a 'PC' marked port that matches one VGA cable. I have the VGA end of the cable is connected to the TV. The other end is connected to the PC Tower via a DVI adapter to the port where was my monitor.
  TV output is set to "PC". I turned on my PC, the Acer (Bios) screen came. He then shows the block scroll bar. Just as Windows is about to light up, cutting signal. I never get to see my office. A message appears on the screen saying "no signal - check the connections and the external device is turned on."
  I had posted before saying that I had problems ranging from VGA to VGA. That's why I bought the DVI adapter to try another solution.
  I hope I made things clear enough for someone to help him.

  Hello Winston M,.
  I actually solved it. Went to the screen and chose. Connection just how I mentioned. second monitor, default Says. I then checked"Extend Desktop to this monitor.
  As I type this, I can see it on my TV screen.
  Thank you for taking the time to answer my question.
  Problem solved
  Ray

• connection to acer laptop to an external monitor

  I have connected the cable from the external monitor to the laptop but can't singal to the monitor. It made long ago and thought F1 would take the external screen display - but does not work?

  Hello

  1. What is the number of brand and model of your external monitor?

  I suggest you follow the link and check.

  Solving the multiple monitor problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-multiple-monitor-problems

  See also:

  http://www.Microsoft.com/athome/organization/twomonitors.aspx