HP Pavilion 15-e008sv: microphone in the front don't DO NOT WORK

Similar Questions

• Pavilion g series: cannot access the recovery partition & disk do not work

  Try to reset the computer to factory since it does not start in Windows.

  When I try to enter in recovery "esc then F11" it will just try to load windows. Recovery partition is still there just can't access.

  So I try to use disc 5 figure set I did 3 years ago & it starts on the 1st cd, but I get a message saying that the disk is not for this computer.

  I'm like what?  This computer rendered & I have the best recollection no changes to anything that should have caused the recovery to think that there is another computer.

  Suggestions on what I might have to do in order to recover my computer to the factory?

  How can I access the partition recovery from normal mode does not work?

  Why the hell does not work my cd?

  I bought the computer again.

  Any help would be greatly appreciated.

  onelunger wrote:

  Thanks for the suggestion, but I can't return to Windows, even in safe mode.

  If this is the case, then you need the recovery media you can perform a factory image recovery.

  You can remove the hard drive and connect it to another PC through an external drive enclosure or a usb cable to sata. Which will allow you to copy your important data from the drive to another device of storage for extra security.

• Premium HP: HP Premium: PROGRAM FOR DOING MATRIX OF BATTERY of the CALCULATOR (don't DO NOT WORK!)

  Hello!

  I attend the University for electrical engineering, and so I plan to buy a good calculator for my needs:

  -programmable with enough memory

  -graphical representation

  -"Advanced" math

  I have not discovered only recently on the amazing HP calculators (e.g. HP 50 g), which are capable of the RPN notation and thus make the calculations very fast and effective. I really hate the new calculators that announce the entry "quick and easy" using graphic symbols and cursor to select the location of the entrance! It of a lot of your time and makes me crazy, especially when it comes to long and "complex" calculations

  As I am not able to get the new HP 50 g, I looked at his "successor": first HP. But unfortunately there many defects in the RPN notation and also in some functions. But I'm willing to compromise, especially if I can write programs to replace some missing critical functions of HP 50 G.

  BUT, when I started looking into writing my own duties I quickly discovered that the lack of management functions of the inputs/outputs and even some strange/inexplicable behaviors.

  I wrote a program:

  EXPORT array()
  
  BEGIN
  
  LOCAL a, b, i, j;
  
  a: = years (1);
  
  IF length (a) == 1
  
    THEN
  
  b: = MAKELIST (years (X), X, a + 1, 2,-1);
  
    ON THE OTHER
  
  i: = a (1);
  
  j: = a (2);
  
  b: = MAKEMAT (years (i + j + 2 - J-(I-1) * j), i, j);
  
  END;
  
  (b) return;

  This program takes the last argument ("a") of stack for the size of the list/matrix.

  If the argument 'a' is a number (list 1 item), it creates a list of the last 'a' arguments from the stack. -> WORK

  Otherwise, it creates a matrix with columns and the specified lines. -> DOES NOT

  Now when I tested the code without I or J arguments MAKEMAT service, she worked OK. He worked too, if I used a very simple expression: for example I have J-1 or i + j - J + 2 (column only scanning).

  (The upper part (1 expression in the stack is the return value after execution of Array ()))

  OK LIST:

  

  MATRIX not OK:

  

  MATRICES OK, so current of enforcement only of years (i + j - J + 2):

  

  MATRIX OK, so current execution really simple Ans(I+J-1) function:

  

  Why these anomalies! I was really looking forward to buy HP Prime, but after all these issues and no real control on the stack of the calculator for the impressive programs

  HP 50 g has built in functions for these conversions, but more recent first HP does not work.

  All the best,

  Ziga

  And summarize the features of the program:

  Make a list of last wrote the number (one being 1: command):

  

  Make a matrix using a schema = {i, j} (a being list in 1: command):

  

  The array() function:

  EXPORT array()
  
  BEGIN
  
  LOCAL a, b, i, j;
  
  a: = years (1);
  
  (A) IF size == 1
  
    THEN
  
      b: = MAKELIST (years (X), X, a + 1, 2,-1);
  
    ON THE OTHER
  
      i: = a (1);
  
      j: = a (2);
  
      b: = MAKEMAT (years (i * j - J + 2-(I-1) * j), i, j);
  
  END;
  
  (b) return;
  END;

• Ethernet port doesn't work - posted the solution don't DO NOT WORK

  All of a sudden my Ethernet connector on the iMac has stopped working.  It is NOT the cable, as I plugged into another computer and the other computer connected without problem.  I did the fix published on the pages of mac support trying to update the Configuration data of the kernel Extension Incompatible.  The support position familiar updated to version 3.8, but mine is version 2.13.  I did the fix explicitly four times, and I still have no Ethernet connection. WiFi is fine. Yes, I restarted everything.  Nada.  Help!

  I'm on Mac v10.11.6

  Hi, so he worked before in 10.11.6?

  What is the exact name of this extension?

  Recently storms in your area?

• Skype To Go to Canada to the Brazil don't DO NOT WORK

  Hello!

  Someone else in trouble with Skype To Go?
  I use it daily for my landline or mobile to the Canada to landlines in the Brazil and apparently receivers to the Brazil can hear me but I can't hear anything on my phone. I tried 3 different phones (mobile and fixed) and got the same result. It began on Friday, May 23.

  Calling phones to the Brazil of Skype on my computer works very well, however.

  Dan

  You should certainly report this problem to the Customer Service as soon as possible

  https://support.Skype.com/en/FAQ/FA1170/how-can-i-contact-Skype-customer-service

  Kind regards
  Neil

• After the replacement of my iPhone screen 6, front facing camera does not work.

  After the replacement of my iPhone screen 6, front facing camera does not work. The rear camera works fine, but when I switch to selfie cam I saw a still image of what was on the camera back; and on snapchat it simply refuses to move to selfie cam. I check to make sure that all connectors are deep-set. Any suggestions?

  If someone else that Apple will replace your screen they screwed up. If Apple has replaced your take screen back to the store.

• The device Optiarc DVD RW not working not not on HP Pavilion dv9000 notebook

  The device Optiarc DVD RW not working not not on HP Pavilion dv9000 notebook... When I insert a dvd/cd he made just loads off noise and won't load anything. When I try to go into MyComputer to manually load theres nothing showing there just my local disk... one of my friends said that it mite Miss port or driver... could someone help please

  Thank you

  ·                        http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• HP Pavilion Volume Touch-Pad don't DO NOT WORK. NO SOUND

  HP Pavilion Volume Touch-Pad don't DO NOT WORK

  I have a HP Pavilion dv3t - 2000, Windows Vista-based computer.

  Touchpad volume above, that the keyboard does not work properly (it there is no sound coming out of the speakers or the headphones), if you touch the part above the keyboard touchpad megaphone, then it remains red, but the sound icon on the taskbar change mute to reactivated when you touch the Red megaphone. The volume on the touchpad slider works amazingly.

  I don't know if I uninstalled something or what but I need this fixed a problem!

  Thank you!

  Hello

  Pretty well, I waited the Audio service to miss because it is installed by the IDT program, but other services were in the correct state?

  Try a manual update to the generic Windows driver.

  Open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select Properties.  Click the driver tab and click Update driver.  Select "Browse my computer for driver software", then "Let Me pick from a list of drivers for devices on my computer.  Left click to access high definition Audio Device to highlight, and then click Next.

  Did this install without error and you get any sound?

  Kind regards

  DP - K

• The second listener intake will not work. My DV6000 is one month old.

  The second listener intake will not work, but I get static when I plug my headphones in there. The other socket works well. I need help fixing it. My DV6000 is one month old.

  Hello

  Robert96 wrote:

  The second listener intake will not work, but I get static when I plug my headphones in there. The other socket works well. I need help fixing it. My DV6000 is one month old.

  One of the is for audio in and one for the audio output. Some versions of some have a plug S/PD/F. Chances are the reason why you get static is that if you connect a headset with a microphone jack, it will try to behave like a microphone. It will not work properly.

  Then. a summary. There is only a single take of earphone

  Best regards
  ERICO
  

• calendar for the week of jQuery does not work in the new version of firefox v42.0

  Hello
  Thanks for your reply.
  IAM develop on the issue that iam facing knowledge, events on the calendar for the week of jquery does not work in firefox version iam 42.0 faced to the problem that iam unable to change back or delete nominations that are displayed.
  For example if try clicking on one of the appointment generally a popup comes to change or to restore or remove the appointment but iam not getting that. But this feature does not work in lower versions of firefox (version 32.0 for example). Please check the jquery week calendar demo following URL looks like this:
  http://robmonie.github.IO/jQuery-week-calendar/full_demo/weekcalendar_full_demo.html

  I've just rescheduled lunch 12:00-12:15, so it seems to work on 42 Firefox on Windows.

  What is the latest version, where it has worked for you?

  Have you tested Mode Firefox safe to rule out the possibility of an extension conflict? See: Firefox in Safe Mode troubleshooting questions.

• Bought two of the iTouch, one for my wife and one for me. In the Notes his has the "" symbol for the formatting and mine does not work. Any suggestions?

  I bought the iTouch two at a time, one for my wife and one for me. In the application 'Notes' my wife shows the symbol "+" to the formatting and mine does not work. Any suggestion.

  Could you please include screenshots of the so-called issue?

• the software sticky password does not work.

  the Sticky Password plugin does not work in Firefox 37.

  Changed the product forum this thread is in Thunderbird in Firefox so no need to create a duplicate thread.

  It is an Extension in Firefox and not a Plugin like Flash or Java.

  You're too test is based on the Beta channel (currently at 37.0b3), and the Extensions like these tends to do not support the current version at most which is Firefox 36. www.mozilla.org/Firefox/All/

  In the Sticky Password software you can go in "parameters - supported browsers and install the extension" because I think that may be the case there are updates? https://support.Mozilla.org/en-us/questions/948577

• Firefox does not (Cup) of the lower edge and the right edge of the graph. IE10 does not work.

  Firefox does not (Cup) of the lower edge and the right edge of the graph. IE10 does not work.
  Office Windows 7 2009 service pack 1 Firefox 26 Internet Explorer 10
  Flash player version 11.9.900.170 plugin 11.9.900.170 activex version used by Firefox

  Problem began late November when Miniclip.com forced updated flash player to version above
  -C' was when they started to play a video advertising in the game box before you could start.

  Have screen shots of IE10 and Firefox26 side-by-side clearly showing the problem - how these can be downloaded for see you? E-mail? Web site? This place seems to be text only?

  In the meanwhile the grandchildren and self have learned to use IE10 instead of Firefox that we prefer.
  Their House of Windows XP has same Flash Player in Firefox and it works fine.

  Downloaded two screenshots on Media Gallery.

  You can not attach a screenshot in the first row who starts a thread, but you can do it in subsequent responses.

  Try disabling hardware acceleration in Firefox (you will need to close and restart Firefox).

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  See also:

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Reset the zoom of page on pages that are causing problems.

  • View > Zoom > reset (Ctrl + 0 (zero); 0 + Command on Mac)
  • http://KB.mozillazine.org/Zoom_text_of_web_pages

• I really hate this version 23.0 requires me to have the band to tabs. I want to remove it. I tried to install version 22 of the archive, but it did not work.

  I rarely use tabs; When I work, I prefer individual browser windows. For a single window without tabs, tabs band is clutter and space wasted. Previous versions of FF has allowed me to remove the tape to tabs in the options. Now on v.23 I can't. How very, very boring.

  I tried to install the previous version, v.22, from the archives, but it did not work. I would be grateful a way to remove the band to tabs in v.23, or further instructions for down to v.22

  Thank you.

  The following may not be the only or most effective way to get the view you want, but that's what I saw recommended so far.

  You can ban the entire tab bar, or when only several tabs are open, by using a setting in the Tab Mix Plus extension.

  Please see this answer for more information: https://support.mozilla.org/questions/963676#answer-464257

  Tab Mix Plus extension: https://addons.mozilla.org/firefox/addon/tab-mix-plus/

• The date and time does not work.

  I have an iphone 5 c.

  The date and time does not work. This is the second time.  The first time was about 3 to 4 months again and now again after upgrade to iOs9.3.1.

  Even after trying to change it manually, time slows down or stops.

  Everyone has problems with their date and time?

  • Try a forced reboot: hold down the House and on the buttons until the unit turns off. Ignore the cursor off if it appears. Once completed, if it does not start on it own, turn off power with the key On. In some cases, it also contributes to double click the Home button and close all applications before restarting.
  • Restore factory settings (no backup)
  • Make an appointment at your local Apple store to have it checked.