HP Pavilion 17-e119wm: what to do after replacing hard drive

Similar Questions

• HP Pavilion 17: mouse pad does not work after replacing hard drive

  Hello

  After replacing hard drive and installing windows 8.1, I can't use my mouse pad.

  I installed the Synaptics driver but it didn't help.

  How can I check that mousepad device is not damaged when replacing the hard drive and which also can I try to fix the mouse pad?

  USB mouse works fine.

  See you soon

  The only way to be sure is to open it up and see if the touchpad cable was disconnected during the upgrade of the hard drive. That's my bet. Easy to forget when you're winding. You don't provide complete model number, but many of the recent models Pavilion 17 require removal of the cover together to get hard disk that requires disconnection of the touchpad cable.

• Satellite Pro 2100: How do I reinstall the OS after replacing HARD drive

  I have a Toshiba SP2100 and I want to replace the hard drive, but I don't have any recovery CD
  So, how can I put the o/s back on?

  Try to connect the external HARD drive to the computer via the USB port and try to copy all content from the internal HARD disk external HARD drive. Then you could try to insert the external HARD drive in the laptop.
  But I've never tried this procedure and don t know if it will work.

  But usually after replacing HARD drive you should boot from the Boot CD as recovery CD or the original CD of Microsoft Windows.
  After the installation of clean Windows OS, you can visit the Toshiba drivers and you can download and install the drivers of Toshiba and utilities.

• Satellite 1410 714 extremely slow after replacing HARD drive

  Hello

  I have a Satellite 1410-714 which has had a hard drive failure. I replaced the drive, but now the computer is extremely slow. Windows has been reinstalled, it was really slow too much and now it takes minutes for windows to start.

  I suspect that something might have broken on the motherboard and the hard disk. I checked mobo replacement parts, but have not found anything for-714, so a 1410 mobo compatible? This model has a processor celeron 1.8.

  Thanks for help.

  Hannu

  Hello

  I can t think the motherboard is broken after replacing HARD drive.
  I suggest updating the BIOS first. Maybe your old BIOS have a few problems with the most recent HARD drive.
  Please check site driver Toshiba for the latest version of BIOS.

  Have you used any anties Virus applications?

• After replacing hard drive and reinstall Windows, DVD Player cannot play a Blu - ray disc.

  Original title: dvd player

  recently replaced HDD and reintegrated windows 7.  Now my dvd player cannot play a bluray disc.  Any ideas how to solve this problem?

  Duplicate the content of the thread:

  After replacing hard drive and reinstall Windows, DVD Player cannot play a Blu - ray disc

  My hard drive recently broken and we replaced and reinstalled windows7.  Now I'm watching a Bluray DVD and the drive will not read it.  I tried the fix auto and that said they detected a problem but can not fix this.  Any ideas?

  Hello

  You can check these links and try...

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  http://support.Microsoft.com/kb/982116

• Satellite U840 - how do I reinstall Win 7 after replacing HARD drive

  I had a HARD drive error.

  So I formatted the hard drive (after trying for months to get the process to finally finish that)
  Now, I a U840 Satellite with a clean HARD drive and do not have the installation for Windows 7 discs.

  I searched the net and found nothing of use!
  Help, please

  see you soon
  Nick

  Hello

  You need to create the own recovery in the past disc!
  This recovery disk allows you to install the Toshiba image after the HARD drive is dead or has been replaced.

  In case you have not created this disk, it is possible to order this support:
  http://backupmedia.Toshiba.EU/landing.aspx

• Error "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer. "after replacing hard drive

  I've upgraded to a replacement hard drive, but Windows Update won't work now. Everything else seems OK.

  The error is: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer.

  I restarted the computer a couple of times and in respect of the Services runs it the Windows Update service.

  Operating system is Vista 64 bit.

  Original title: Windows Update

  I've upgraded to a replacement hard drive, but Windows Update won't work now. Everything else seems OK.

  The error is: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer.

  I restarted the computer a couple of times and in respect of the Services runs it the Windows Update service.

  Operating system is Vista 64 bit.

  After the upgrade to the bigger hard disk, I found that the technology Intel Rapid Storage Technology driver should be updated. Once this is done Windows update ran properly. Microsoft Fixit did not help in this circumstance.

• Recovery disk works does not after replacing hard drive Pavilion dv7

  Hello. I have problems of replacement of a failed hard drive in my HP Pavilion dv7-6154nr notebook running Windows 7. New HARD drive seems to install OK, but I get a Windows Boot Manager error when I try to run the recovery disks created when the system was purchased. The message says "the boot selection failed because a required device is not accessible" "status: Oxc000000f. I changed the boot order in the BIOS to boot from the internal DVD player but continue to make the same mistake

  More info: I upgraded the HARD drive from a Toshiba MK6476GSX - 640 GB - 5400 RPM for a WD Black 7500BPKTSP.  I don't see any info in the new HARD drive in system information / BIOS so I don't know if it is recognized. However, it take and pass a diagnostic test.

  Thank you.

  You are the very welcome.

  Now you get the drivers from the support page and driver for your PC.

  http://h10025.www1.HP.com/ewfrf/WC/softwareCategory?CC=US&DLC=en&lang=en&LC=en&Product=5151752&Task= &

  If you have a problem to find drivers (such as the wireless, unless you already knew what the wireless adapter model you have in the PC, you will not know which driver to install).

  Just after the hardware ID's for all you can't find the drivers.  Who need device drivers appears in the Manager for devices with a little yellow. brand and labelled with material generic terms such as a network Contoller or PCI device, etc.

  If you don't know how to find the hardware ID, please read the info on the link below.

  http://www.DeviceDriverFinder.com/blog/device-drivers/how-to-check-the-hardware-ID-for-a-Windows-device

• HP Pavilion 23-g013w: recovery of operating system, replace hard drive and memory now what?

  My hard drive stop working on my HP Pavilion 23-g013w all in one computer. I replaced it with a new 1 TB hard drive. I also installed new memory Crucial upgrade to 16 GB.   All new "hardware" is installed on the computer. When he came she said "Please install operating system on your pc" I ran to the verification of memory and the hard disk check and they both passed.

  I had this all in one at Wal-Mart 2 years ago and it did not come with the recovery disk or they were lost.

  Is there a way to connect with ethernet and download the software, I need?

  Otherwise, what is my next best option... .or not?

  Thank you.

  Thank you very much for the help.  I will continue to "hold" on the line...  Good day.

  Aaron

• Satellite A60-772: What readers need after format HARD drive?

  I would format my hard drive. Should what drivers I have to load after the format? Thank you

  Hello Eliane

  After the installation of the OS, you must install the drivers, tools and utilities. As far as I know with your laptop is also supplied Tools & Utilities CD. This CD contains all this stuff. If you do not, you can download it from the Toshiba support under http://eu.computers.toshiba-europe.com page support & downloads.

  It is very important to install things in the right order. To make this review please document Instructions of facilities.

• activating windows 7 after replacing hard drive

  Yesterday I received my HP Pavilion Slimline s5120f return of service.  Today, I went through the painful process of put my pc as it was before the repair.

  So, after the upgrade to windows 7 since vista) I went to turn on and it says that my product key cannot be used.  I'm assuming its because my hard drive has been replaced.

  So what I do now?  Should I call HP for another product key?

  Thanks for the tips

  Thanks guys... I was able to activate using the automated phone system, I didn't even need to talk to a person.

  now, if I can get my printer lexmark stupid to work with windows 7!  I hope that they will make compatible drivers soon

• No sound on my Satellite after replacing HARD drive.

  I recently got a new hard drive on my PC, but there is now no sound system in the computer.
  I guess I need to install drivers? What drivers do I need and how to install? Thank you.

  Hello

  You really think that someone will be able to post a useful answer without knowing details of your laptop model and the installed windows operating system?

  I can tell you a standard procedure.
  After having changed and replaced the HARD drive, take the Toshiba Recovery disc and install the system using this disc.
  All the drivers and tools are preinstalled on this OS, and by using the recovery disk, you should get the sound on your laptop.

  Good bye

• Recovery disk failure after replacing hard drive of a laptop computer DV7 series

  I have a HP Pavilion dv7-4270us with Windows 7 64 bit and recently received a message on start-up indicating that the intelligent of my hard drive failed. I bought a hybrid Momentus XT drive. I bought the recovery discs, since I neglected to follow my own advice and did not have a game. Replaced the hard drive, and begun the process of recovery, after the disc of the Application, the system was declared finished, clicks the button, the system shuts down. Activated power, recovery took over for a few minutes, declaring that he was copying files, a few minutes later, he said it was over asking me to click done. After that I did it, the system has rebooted hung on the screen of the HP logo with the statement in the lower left corner indicating "press ESC for the Start Menu. My only recourse was to power down the machine. When I restart the computer, I get the message 'Bootmgr' missing

  I have already paid through the forums and tried to download the Windows 7 Home Premium 64 bit DVD of digital life. As it starts installing, it indicates that a driver is missing, I poured by drivers for this computer and see nothing for SATA, and none of the others would be required to start. I succeeded in my Windows 7 Professional on the loading system, but since I don't have an extra code to hang out professional, it's not helping right now.

  I also tried to partition the new disk manually using a device that allows me to see the drive using a USB port and my office, but he's not right. The good news is that the old drive still works to a point. I can read it via USB, and I can back up the drive, with the exception of the recovery partition. But when I put the new disk and set up similar scores for the original drive, it still does not start.

  I have tried many other things all pronounce the failure, I'm not used to failure when it comes to computers, so be gentle.

  Hello:

  The missing pilot is due either to a bad burn or use another brand of DVD. You must burn the ISO at the slowest speed possible file that you can.

  In addition, check the size of the ISO file that you downloaded. Sometimes you do not get the full 3. XX GB even if the download says completed.

  If you have 4 GB or more large USB flash drive, you can install W7 as it.

  Just follow these instructions...

  Download the MS of W7 USB installation tool and read the instructions on the page to use.

  http://www.microsoftstore.com/store/msstore/HTML/p bPage.Help_Win7_usbdvd_dwnTool

  You may also make this mod as I did if the flash tool-error.

  Download the bootsect file form http://www.everettsporting.com/bootsect.zip

  You will need to go into Control Panel, select display large icons, go to the icon of folder options, view tab, and select the hidden files and folders option.

  Once downloaded, copy the BootSect.exe file in the same folder that contains the file of Windows7-USB-DVD-Download - Tool.exe installed. This file in Windows 7's default installation directory is C:\Users\USERNAME\AppData\Local\Apps\Windows 7 USB DVD Download Tool\
  
  Run the application from the Windows 7 USB/DVD download tool as described on the Microsoft Store website. The end result will give you a boot USB flash drive that contains everything you need to install the 64 bit version of Windows 7.

  Paul

• H8 - 1420t envy: Hp Envy - can't Access BIOS Can or Start Menu after replacing HARD drive

  Hello!
  
  One of my friends has problems with their computer and gave it to the difficulty. First thing I did was try to start it up and it didn't not even start. He tried the auto repair and failed. Then attempted to fix startup problems via the Win8 splash screen and doesn't have too much that. So, I tried a refresh and even that failed. I took out the hard drive, connected on my PC at home and save all the data I could find. I had problems with some data and often he would crash my windows explore (as my friend told me that he did while they were using the PC), so I've determined the drive HARD shot.
  
  Got a new HARD drive and put it in. At caught my drive of Windows 8 and slapped in. When I went to start the PC, I tried to hit all the keys BIOS I could think: Esc, f2, f8, f10 and f12, del even. Nothing has worked. He's just sitting at the HP logo and then after about 20 seconds, he went to a black screen that says something along the lines of "not detected no boot disk".
  
  I can't boot into the BIOS. If I plug the old drive hard when I get to the blue screen of Windows 8 start with parameters such as the "Refresh" and "reset the PC. If I try to access the CD/DVD drive under the 'Remote access' button, I get a black screen with a cursor. It just freezes there. If I try to access the settings of UEFI, it freezes in the blue menu with functions.
  
  I don't really know what to do here. I'd appreciate any help! Never had a problem this stubborn before.

  Wanted to just go back and say I have solved my problem.

  The computer didn't like the keyboard I used! I caught a pretty generic keyboard that was laying around and plugged him that. Hit Esc at startup led me to the boot menu.

• Reinstall Windows XP after replacing hard drive

  I had to replace the hard drive on my Lenovo 3000 n200 laptop. The old drive was unusable and recover nothing from him. I have backups of all the files and folders to an external drive, but this does not have to reinstall XP Pro on the new hard drive. No CD of the operating system that is not supplied with the laptop. I'm trying to reinstall using the original disc I386 folder but WINNT32 ends without any indication of the reasons why after asking for a key product and running for a short period. Any suggestion would be appreciated.

  oldrah

  Has received recovery disks (2 discs) and ran the recovery process. Win XP installed and Setup took place, but lacked 9 pilots. A call to Lenovo support has led to a very nice lady to help me to track down and install the missing drivers. In order to facilitate its work, I enabled him to use a remote access facility to support my laptop and do what was necessary to install the drivers. Later, I've updated Windows for common maintenance and has started to re - install some software that had been on the laptop. Everything on the laptop is roughly back to where it was before the hard drive is dead, or better. Quite a learning experience.