HP Pavilion 20 all in one

Similar Questions

• HP Pavilion 22-2100np All-o: HP Pavilion 22 all-in-One Max RAM

  Hello
  
  I looked up ram max that I can install it in a 22 HP Pavilion - 2100np all-in-One, I know that I have only 1 slot for it. But I can not find anywhere the max. I think updating to 8 GB or 16 GB at the momento. We know if it will work?
  
  Thanks in advance

  Thank you. Update patient to 16 GB since I'm on 64-bit windows of 8.1. And I am really surprised at the quick response
  
  Thank you once again

• Pavilion Touchsmart all-in-One: how to install the SSD in Touchsmart F234? What form factor is necessary?

  Will be HP 20-f234 enhancement by replacing the HDD with SSD.  Two questions:

  1. is there a video (or even a set of complete step by step instructions would be) Bay of any place that illustrates how to get the HARD disk inside?  (Remove screws, etc.)

  2. what form factor SSD is supported?  That is, will I need an adapter of some sort support if I have a 2.5 SSD "?

  Thank you.

  Seems to be a 3.5 "desktop drive

  How to replace the hard drive

  http://support.HP.com/us-en/product/HP-Pavilion-20-all-in-one-desktop-PC-series/5359028/model/5365334/document/c03690508/

  Your support page

  http://support.HP.com/us-en/product/HP-Pavilion-TouchSmart-20-F200-all-in-one-desktop-PC-series/5359028/model/5365334/how-to

• have hp pavilion 23 all of one and no ability touchsmart

  Purchase hp pavilion 23 all-in-one with Windows 8 and do not seem touchsmart ability?  Feel stupid but have to ask.  It is downloadable as App or my hp is not compatible with the touchsmart. ??

  When you request support, please provide the number of name and/or product of comprehensive model of the HP computer in question. HP/Compaq made thousands of computer models which are all different. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are on the back or the bottom of your computer.

  A "Touch Screen" is a component material that allows to provide with the Enter key and is not something that can be downloaded and installed as an "app" or the software.

  Please click the White Star of KUDOS to show your appreciation

• How to clean the fans on my HP Pavilion MS227 all-in-One

  I need to blow the dust out of my fans on my HP Pavilion MS227 all-in-One. This model has no trick, I can't find anything on the web to explain how to get to the fans so I can clean the dust.

  Hello

  Your AIO PC is only a 95 Watt system.  The best you can do is to use a can of compressed air and blow air through the upper and lower holes.  I doubt that your willing AIO with a fan and if there is a there is not a service procedure.

• Pavilion all-in-one 23: Add the second monitor to HP Pavilion CTO all-in-One-23-p110z

  As it is configured, the factory is the "HP Pavilion all-in-one-23-p110z CTO" capable of supporting a second monitor?  I see NO obvious "video inputs" ports.

  Thank you!

  Hi @beckinista,

  Thank you for being an active member of the HP's Support Forums.   I understand that you would like to know if you can connect a second computer monitor 23-p110z all-in-One CTO Pavilion.

  The specifications of the motherboard of your computer show that there not a secondary display port. I have included HP Pavilion 23 - p110z all-in-one CTO Office product specifications and configurable Options and HP and Compaq Desktop PCs - specifications of the motherboard, Boa for your reference.

  I hope the above helps.

• 23 Pavilion: Pavilion inadmissible all in one office

  During the night my all-in-One HP Pavillion was a whirling noise, and then the shots as if it was updated.  Since then, I have not been able to start.  If you press the Start button, it flashes for about one second and turns off, out of order?  I have McAfee Security and it works every day.  What could be the matter?

  Hi @dcw2482,

  Thanks for reaching out! It is a great location to get resolutions and interact with experts from the community. I understand that the computer power not on. It will be a pleasure to help you.

  You did a great job on diagnose the problem on your side. Kudos to you on this point. It is always a privilege to work with tech-savvy and technically competent customers like you. We greatly appreciate your relationship with HP.

  It looks like a hardware problem with the computer. Isolate the problem correctly.

  Please do a hard reset first. Link for the hard reset: http://support.hp.com/za-en/document/c01463028

  Then try turning on your computer. If it works, then the issue should get resolved. Otherwise, please try a different wall socket, bypassing any power strips. If possible, please try a different power also cord. If nothing works, the computer needs to be repaired. Please contact the HP support by phone by visiting this link: http://hp.com/contacthp

  I hope this helps. I would like to know how this happens. I hope the problem is solved without hassle and the unit works very well.

  Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Now carefully and have a wonderful week ahead.

• Pavilion MS225: all on one black screen help

  Hi, from Thursday morning, I noticed a light flickering on the screen on and off during the day, then that night, the screen went black all of a sudden, I could put in sleep mode and wake him up, things went very well after that.  I turned it off for the night and kept overnight get this screen black (I could barely see the bottom of screen and icons) but I was able to see my login page for a few seconds when wake-up mode 'sleep'.

  I went to updates and saw that the Realtek High Definition Audio Driver need updated, so I tried and failed so he can install from Windows. I could see the screen enough to get on the industrial site and uninstall and reinstall. I reinstalled graphic discs too. Now, it seems to work very well, not black screen or flashing for about 5 hours now since the update the Realtek device. I was wondering if that was the question all along, is that this driver not getting updated cause screen problems? I also installed AMD Catalyst Install Manager and it updated the drivers.

  Honestly, I don't know much about computers and it is the only one I also gives access, any help would be appricated! Thank you

  Hi there @slyn1234,

  Welcome to the Forums of HP Support!  It's a good place to find the help you need, other users, HP experts and other support staff.  I understand that your computer screen went black, and after updating the driver it works again.  I'm happy to help you with this.

  In response to your question, as to whether that was the problem, I'll give you a qualified Yes. It may be that the driver has been updated but that something has happened to the existing driver, the file has been corrupted, or another program or driver was installed that are in conflict. Another option is that a setting has been changed somewhere; There are several possibilities.

  If this kind of thing happens again, see if you can boot your system with the help of computers HP - safe mode of Windows 7. Windows safe mode will load with the base drivers and is a way to access your system, if it seems that there is a software problem. Can be modified in Mode safe as parameters to display, or drivers, or uninstalled applications that may not be easy to dismantle a normal start.

  Another useful to look at document is: HP PC - computer won't start (Windows 7). I hope this helps.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• HP Pavilion 23 all-in-One: HP Pavillion on update apps lost all modules? Better I would say that if you read below? TX!

  My desktop computer with Windows 8.1 HP says that it has been updated apps this morning for about 10 minutes. Never seen that before. The entire screen changed colors as I associate the colors of the subway. Reports came as Taking care of Stuff, do not turn off your pc, please wait, close to... etc. After that, he went to a white screen, white a grey taskbar and a metro start button that does nothing. When I run the Task Manager, it says there is no process running. I have a key to recovery, but there is so much to lose if I do that. Although I happily backup of files. I get a screen flash, then a login where I can put my password, everything looks normal. Then it goes to this blank black screen with the Metro useless start button at the bottom left.  I would appreciate help!

  I can get into the Task Manager and there is no one under USERS?

  No listed process?

  If I try to run Explorer from the Task Manager, it says "the server could not be started because the configured identity is incorrect." Check the user name and password?

  I thought I had a fix. I get to the logon screen with my photo. Ther right there is an icon of power. If you hold SHIFT and restart it goes to troubleshooting. I've tried everything. Finally, I tried USING A HARD DISK and I stuck the USB Flash Recovery drive, I did.  When the computer reboots, it goes to logon. I connect (with the flash is connected) and YAHOOODY everything is back. My office job and complete. I thought a lot. I ran several spyware programs, did a restore and released the flash player.  Rebooted and the same problem I'm talking about in the above paragraph.

  What is missing from the pc. The user info is corrupt? Go? Why having the USB connected stick recovery allows me to login and see all normal? I would appreciate so no help.  Thank you. Jack {":-Dx}

  I ALWAYS KUDO AND MARKED RESOLVED. It is THE RIGHT THING to DO... doncha know. «  :-D
  Find thumbs upward, then click on to a KUDO
  Look to the right and see the OPTIONS to mark ACCEPT as a SOLUTION. Thank you!

  Since it was not all the responses from 4 different forums I decided to bite the bullet and do the first factory restore on this PC for the new 2 years ago. Hated only ti, but no other options. All files have been / are saved on USB and drive Google and OneDrive 40gig. Just hated to lose all programs and configurations.

• Pavilion 23 all-in-one: Storm

  Hi all, yesterday we had a thunderstorm to Euless Tx., my wifi device does not work after the Thunder struck, my office everything in a single pavilion23 is shocked too, it was off and the CAP turns off too, but it was connected to the wifi a cable.

  Now when I turn it on, the CPU fan only works too fast, I tried 30 second drain power, removed the battery CMOS, unplugged the CPU fan, traded to the Rams, still have the same problem.

  When power is first applied, the fan runs at 100% speed.  It is only slowed when the
  CPU starts to run and lower the fan speed.

  If it has been turned off, other son AC could have plugged a surge into the machner.  But don't forget, it is electricity.  Incoming overvoltage on power supply must have a different outgoing path.  So much damage as may exist on this outgoing path.

  In the meantime, the power brick has surge protection generally greater than anythnig that you could plug.  Indeed, a power strip protector may even compromise (by-pass) protection already inside all computers.

  To tell more requires the unexpected facts.  It may have been damaged by a power surge (no matter if on or off).  He may have failed because of something that creates more chess - any manufacturing defect.  No one can say without first identify a failed motherboard or the inner part of the power brick.

  Unfortunately, you tried to fix it before identifying the failure.  All these changes can have complicated the solution.   First gather facts to identify the problem.  In your case, apparently the power controller (or smoethnig else) is not allowing the CPU to run. Which is just one possible.  To tell more requires concrete facts which have not yet been provided (other that the fan rotates at a speed of 100%).

• 140 21 Pavilion - t All in One: SSD drive expansion slot

  Lavender U motherboard has a "half-length card mini" Jack. What is a PCIe compatible location? This slot allows you to add an SSD PCIe drive to increase the capacity of drive? I was told by one person in support of HP that it would be another told me it can not be used, I am confused and do not want to invest in a SSD PCIe drive, if it does not work.  Also of a compatible SSD details, I want to add 256GB.

  Thank you

  DW3411

  Thanks Big_Dave, this compensation for me. I have another question please, the installed BIOS supports AHCI if my SSD drive will show all the benefits? I think just to replace my internal drive with an SSD is not using the msata slot.

  Anything else I'm missing or need to know?

  Thank you

  Dave

• HP Pavilion 23 All in one PC: how to video output of the 23 Pavilion

  Hi HP.

  I use HP Pavilion23 AIO PC like my PC photography. I often have a video projector or tv but it wasn't a video output for Pavilion 23.

  I'm looking for video output solution fom my PC AIO.

  Are there any external video card, can I apply?

  Is there any device USB - HDMI that I can use?

  Please advice as it is an obstacle for my work.

  BenSiak Malaysia

  Hello

  They are many, such as:

  http://www.StarTech.com/AV/USB-video-adapters/USB-3-to-HDMI-DVI-external-video-card-multi-monitor-adapter-1920x1080~USB32HDE

  Kind regards.

• delete a user account on Pavilion 20 all-in-one

  My husband and I are the only people who use this computer and have created two user accounts and need only to have a.

  Need to know how to remove one of the users. I can see where he has the opportunity to add a user in the settings of pc and change a picture, but nothing about the deletion/removal of one of the user accounts.

  Help, please.

  Thank you!

  Hello:

  Please visit the link below to know how to delete a user account in windows 7.

  Read the section on to the PC in a working group.

  http://Windows.Microsoft.com/en-us/Windows7/delete-a-user-account

  If you are under Windows 8, there is a slightly different procedure that you can watch in the video on the link below.

  http://www.avoiderrors.NET/delete-user-accounts-in-Windows-8/

• Pavilion 23 all-in-one: Bluetooth does not

  This driver is appearently obsolete but I can update. How can I reinstall it?

  Broadcom BCM943228HMB 802.11abgn adapter Wi - Fi 2 x 2

  Hello:

  It is the latest version of the W10 BT driver for this model of the wlan card...

  This package contains the Broadcom Bluetooth driver for the supported models that are running a supported operating system. Broadcom Bluetooth driver is necessary to enable the Bluetooth of Broadcom devices.

  12.0.1.921 Rev.A (21 March 2016)

  FTP://ftp.HP.com/pub/SoftPaq/sp75001-75500/sp75330.exe

• Pavilion 20 all in one pc: my UEFI Bios does not appear when I click on the parameters of the UEFI firmware

  I have to change some settings in my bios so that I can start my CD of restoration but whenever I click on the parameters of the UEFI firmware and select restart it never brings the Bios screen.

  When the computer begins to boot, start to type the F10 key continuously.  This should access the BIOS.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.