HP Pavilion 400-314: HP Laserjet 6 p printer with ppt1 via USB port

Similar Questions

• Pavilion 400-314: how to transfer information from Drive on PC that isn't working hard for new PC?

  My old Pavilion s5123w PC power collapsed work put into a new one, it has not worked, Pc lights. I bought a new PC of Pavilin 400-314. Can I buy a USB cable for it and for my new PC and trasfer information in this way in HDD old PC Plug?

  Thanks Scott

  This BH trying to tell you is really simple.   An internal hard drive needs an adapter to connect it to another external system.   I use this adapter for most punctual transfers.  I hope that this product.

• HP Laserjet 1102w: my HP LaserJet 1102w not print large documents via wifi

  Hello, I have two HP LaserJet 1102w news. I installed and configured via the wi fi and it the test page prints correctly.

  The problem is when I try to print large documents (with more than 400 KB). In this case the printer says "print...". "and in the printer, the green light flashes but not print the document. If I print small documents, it works OK.

  If I do a ping to the printer with packages of more than 8 000 bytes, I get 'timeout for this request. If I do a ping with packets of 8 000 bytes, I get the answer in 5-6 ms.

  Both printers has the same problem. I have different devices connected to the local network, and it all works well. I have another printer that works well with large documents... so the problem is not the configuration LAN or WiFi.

  What can I do? Thank you!

  Well, I solved the problem.

  I'm going to 'devices and printers-> right click on the printer-> properties-> Advanced tab printer' and check 'installed the driver. In my case, there is no "HP LaserJet 1102w", who is the best driver. So I remove the device and has installed, and I get the right driver "HP LaserJet 1102w.

  Now the printer works OK.

• Color Laserjet 2605dn: duplex printing with UPD

  The universal print driver that runs on Windows 10 (64-bit) does not recognize on my Color Laserjet 2605dn duplex printing function. drivers passed under older versions of Windows enabled this setting on the Advanced tab.

  Is there a way to enable or UPD grants only limited functionality and does not support the duplex feature?

  Hello

  in devices and printers click on the right button the printer UPD icon and select printer properties.

  In the device settings tab, verify that the accessory set duplex as installed and check for the difference.

  Please let me know if this can help,

  Shlomi

• Pavilion 400-314: disk hard failure DST DST short and long

  Black screen on startup. Ran Diagnostics and it doesn't have control of the short DST with error code: 9GFF8M-0007MV-9VV6LI - 60 QT 03. Check failure of the DST along with error code: 9GFF8M-0007MV-9VV6LI-618303. Y at - it a hope?

  Hello
  
  Unfortunately to say: most of the time the 24 tank failure id indicates the drive is defective and must be replaced. It is still under warranry? In the affirmative, please call HP for a replacement.
  
  In the United States:
  
      http://WWW8.HP.com/us/en/contact-HP/phone-assist.html#section1
  
  or the HP technical support: 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.
  
    http://welcome.HP.com/country/W1/en/contact_us.html
      
  Kind regards.

• Office Pavilion - 400-540hk: unable to retrieve files from the old desktop USB HARD drive

  My old desktop (model: CQ4128HK) can be power on. So I bought a new desktop computer (model: Pavilion Office 400 540HK). I have a lot of important files in my old office, so I bought a SATA-USB enclosure and connect my old hard drive to the new office. However, after connecting the old HARD drive, I can't find my files or windows folders; Instead, I see that a single drive with folders named "Backup-xXXx" or "WindowImageBackup".  Please suggest how to recover my files on the old HARD drive. They are very important. Thank you.

  Hello

  Please try this first: bring the box (old HDD) and connect it to a machine not HP to see how it goes. I remember I have one similar problem in another day; reason: the old HDD still has a "signature" as a boot device.

  Kind regards.

• Pavilion 15 n-246se: usb port 3 for hp Pavilion 15 n-246se

  I have hp pavilion 15 n-246se and I tried hard to set the usb port 3, but I can't... it worked before, but now it no longer works

  Thanks in advance

  Hi @sohaibadel,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP Pavilion Notebook 15-n246se and problems with USB 3.0 does not properly. First of all, you need to remove all USB devices.

  In Device Manager uninstall everything that is listed in the USB devices. Restart the computer after the uninstall, it must be reinstalled automatically. Then put in the USB devices and it should update all drivers.

  Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that may need updating.

  I would like to know how this happens.

  Thank you.

• LaserJet 4 does not print via USB

  I have a Laserjet 4V that I recently bought a USB cable so I could connect to my HP M9252p under Vista 64-bit Home Premium computer. When I plugged the cable U he said it had detected new hardware and install. However, he didn't add the printer to the printer list. Then manually, I have added the printer and assigned via local port USB001. When I went to print test page it says it was sent to the printer, but neither made an impression or even appear in the queue. I checked the pilot site and it says that the driver is under Vista so I am current. Just to be safe, I disconnected and connected to my laptop HP 6910P XP and he acknowledged and I could start printing immediately. Would like to print from my desktop machine.

  Tuesday, June 15, 2010 19:39:56 + 0000, jbarrac1 wrote:
   
  > I have a Laserjet 4V, I recently bought a USB cable so I could connect to my HP M9252p under Vista 64-bit Home Premium computer. When I plugged the cable U he said it had detected new hardware and install. However, he didn't add the printer to the printer list. Then manually, I have added the printer and assigned via local port USB001. When I went to print test page it says it was sent to the printer, but neither made an impression or even appear in the queue. I checked the pilot site and it says that the driver is under Vista so I am current.
   
   
  It may be under Vista, but you did not say that you have installed the
  pilot. Did you?
   
   
  > Just to be safe, I disconnected and connected to my laptop HP 6910P XP and he acknowledged and I could start printing immediately. Would like to print from my desktop machine.
  Ken Blake, Microsoft MVP (Windows desktop experience) since 2003
   

  Ken Blake

• Set up the LaserJet P1006 on print server

  I'm trying to set up a HP LaserJet P1006 on a D-Link DP-300U print server.  I currently have a HP Photosmart 1315 on the same print server.  Implemented for the Photosmart was very easy (Setup program on the USB Port or parallel).  Now, I want to add the P1006.  When I try to install via system preferences, I am able to detect the print server and available USB port.  However, there is no driver listed P1006.  I tried to use the downloaded driver, but it does not work.  The installation program does not 'sees' the driver on the file.  If I connect the P1006 directly to my iMac, Setup goes very smoothy.  I prefer to use the printer on my home network.  (I need two printers on the network).

  Hello

  Have you tried the driver based on the host?

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-55362-6&cc=us&DLC=en&LC=en&OS=4063&product=3435684&sw_lang=

• HP LaserJet M1132 MFP prints not a remote desktop

  Hello

  I have a MFP HP LaserJet M1132 (number of product CE847A) connected to a PC (MS Windows XP Home Edition + SP3) via the USB port. There is no problem with the printer. However, when using Remote Desktop connection (it is set to use the resources and local facilities, or in my case, printers and ports series) on the server (MS Windows Server 2008 R2), I can't even print a test of a remote office page.

  Error message: "print a test page failed. You want to display a tool to solve printing problems to get help? »

  But it does not anywhere as planned is access to the internet, and I've not had a MS Windows Server 2008 R2.
  The same error is for the HP LaserJet M1120n MFP.

  On my PC I installed another printer - old OKI ML321 (needle) connected to a PC using LPT cable and network printer Konica Minolta 1690MF (in another room). In two of these printers can easily print a test of a remote office page.

  Please help me.

  Thank you for your interest.
  The situation is a little different from the image. Windows Server 2008 R2 is available across the WAN. LAN is connected to the PC-1, 2 - PC and printer Konica Minolta. HP LaserJet M1120n MFP is connected through the USB port of the PC-1. OKI ML 3320 printer is connected via LPT also to the PC-1. PC - 1 has access to Konica Minolta printer via the local network. PC - 2 also has access to Konica Minolta printer via the local network. PC - 2 is also available for PC-1 HP and OKI.

  It seems to me that I found the explanation for printing problems - some of 'my' printers are simply not compatible with Windows Server 2008 R2. I found on the net the following information:

  http://www.windowsservercatalog.com/item.aspx?idItem=cdde267a-800D-2d9f-1f0c-225cabd6838e&bCatID=1282
  http://www.windowsservercatalog.com/item.aspx?idItem=31df9819-ca52-4684-dc3b-8e31b70c77d7&bCatID=1282
  http://www.windowsservercatalog.com/item.aspx?idItem=6475235d-8DBB-9e95-11dc-3575d569acc2&bCatID=1282
  http://www.windowsservercatalog.com/item.aspx?idItem=59731747-9976-8D51-DCBB-7664cbc17a89&bCatID=1282

  I think I can close the topic.

  (translated from Polish into English using Google translator)

• HP LaserJet M401dn via USB

  Environment: Horizon view 5.2 with WIN7 linked clones and persistent disk.

  I have a HP LaserJet P1606dn printer. When you connect the printer via the usb port (this is how it should be implemented), the printer attempts to load, but installs as an optical device. The drivers are on the link clone. What I did next is to connect the printer to the network and to enter an IP address. I then went in the printer settings via a browser. The printer is a parameter called "automatic detection". I have disabled auto connect. Then I unplugged the printer and connected via USB. Now the printer is displayed correctly on a clone of link and works all the time.

  Now for the M401dn I added the drivers to the virtual machine. When I connect the printer via USB, it prompts you to install the drivers. You can go through this installer and it will install the printer on the link clone, but when you restart the machine the clone of link does not keep the installer. That's how a clone of link is supposed to work. I tried connecting via an IP network and see if there is an auto connect as the P1606dn, but I don't see one. So, how can I get this printer to be installed on a clone of link via USB?

  Thanks in advance for your help.

  I found the answer. For all those that are insterested the HP LaserJet M401dn printer has a display screen. Turn on/off service, HP Smart Install. Disable Smart Install.

• HP Pavilion slimline 400-314: work which hard drive to my hard drive adapter

  "My old HP Pavilion slimline computer s5123w turns to March 2015, there a drive hard internal Barracuda 3.5 ST3500641AS-RK can I use a Vantac 2.5"/3.5"/5.25" SATA/IDE to USB 2.0 adapt - CB-ISATAU2 model for hard drive Barracuda to transfer the Outlook2003 to my new computer a HP Pavilion Slimline 400-314

  Thanks Scott

  Hello

  You can find them (May marks) of any good computer store.

  http://www.vantecusa.com/en/product/view_detail/416

  Kind regards.

• HP Pavilion Slimline 400-314 Desktop PC Windows 7 drivers

  I'm downgrading a:

  HP Pavilion Slimline computer to office 400-314

  HP G4A91AAR #ABA
  4UT4210G8Q

  The operating system I install is:

  Microsoft Windows 7 Ultimate Edition 64

  I used DISKPART to "clean" all THE partitions on the hard drive.

  I rebooted and installed Win 7 from a USB key.

  The HP Pavilion has an AMD processor.

  Device Manager indicates I need to load the op/sys
  specific and chip set drivers specific for the:

  Network controller:
  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C & REV_01
  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C
  PCI\VEN_168C & DEV_0032 & CC_028000
  PCI\VEN_168C & DEV_0032 & CC_0280

  Ethernet controller:
  PCI\VEN_10EC & DEV_8136 & SUBSYS_2AFE103C & REV_07
  PCI\VEN_10EC & DEV_8136 & SUBSYS_2AFE103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200

  and

  SM Bus controller:
  PCI\VEN_1022 & DEV_780B & SUBSYS_2AFE103C & REV_3A
  PCI\VEN_1022 & DEV_780B & SUBSYS_2AFE103C
  PCI\VEN_1022 & DEV_780B & CC_0C0500
  PCI\VEN_1022 & DEV_780B & CC_0C05

  This will direct you to my research please?
  Thank you for all your work.

  Hello:

  First install the amd chipset drivers and reboot.  You want the first driver on the Web page.

  Who will install the smbus controller.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  Graphics card:

  http://support.AMD.com/en-us/download/desktop?OS=Windows%207%20-%2064

  Ethernet: DL and install second driver on the list...

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  Wireless:

  See if this driver works...

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dcp_129089_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• HP Pavilion 500-314: IDT High Definition Audio works do not (HP Pavilion 500-314)

  Hello.  I have a HP Pavilion 500-314.  It works on Windows 10.  My audio worked fine until I had to reset the computer after my computer went into a loop of "prepare the AutoFix.  Once I reset the computer, there was an 'x' next to the small speaker icon in the lower right corner.  When I move my mouse over the "speaker" icon, he says "no speakers or headphones are connected.  It drives me crazy that the other posts about the IDT High Definition Audio did not work.   I would appreciate a quick response.  Thank you for your time.

  Shayna - Ghram-Kaiser

  Hello:

  Given that I don't know what other posts read you about it, what works for most forum members is to install the audio driver IDT W8.1 support page and the driver of your PC.

  This package provides the Audio IDT high definition (HD) to support of office models that are running an operating system supported. -Provides the models of desktop audio driver version and supported operating systems.

  File name: sp65946.exe

  If you have already done this and it has not resolved the problem, unfortunately I don't have any other suggestions for you to try.

• help HP Pavilion 500-314

  I just bought hp Pavilion 500-314. I followed the setting up guide that showed all the connections. I just read that you should not connect internet before completing the initial installation. I equipped with computers connected to the internet. I have to reset it and start over with not connected to the internet, or everything will be ok, as is?

  Hello

  I always put in place new PC with Ethernet connection active.

  You should not have any problems and will not have to re-run the installation program.

  Jaco

  I'm not an employee of ch *.

  "" "" Please give a "Bravo, Thumbs Up" If the notice is relevant or "accept as Solution" to help other users of the forum having a similar problem.

  HP products:
  Retrograde 810-150se (Win 8.1) office in Win 7
  17 t - j000 Notebook (Win 8 upgraded to Win 8.1)
  H8 1380t CTO Office (Win 7)
  560z Desktop (Win 7)
  
  Other PC:
  Laptop Dell Inspiron (Win XP upgraded to Windows 7)