HP Pavilion 500-369: prob inherited from the bios!

Similar Questions

• Pavilion 500-304nd: failed to update the BIOS

  The HP Support Assistant keeps present me BIOS update SP70148, version 80.20Ap1. Even if I see no notice of this, it seems that the update has actually not every time after you download and install the update (black BACK box opens and closes) and subsequent automatic reboot. I also tried to use the download of your support pages, but nothing helped.

  Please notify. Thank you!

  We are aware that there is a problem with this update on the motherboard S of Memphis.

  I advise you when updating fixed or replaced.  Please be patient.

• Pavilion tx1410us - error messages from the BIOS disk Test

  My first post here so greetings and a happy new year to all.

  I have a Pavilion tx1410us who seems to have a hard drive problem. I have Vista (Partition 2 - 60 2 GB as/dev/sda2) and Ubuntu 10.10 64-bit (1-1 St 20 GB as/dev/sda1 Partition) on the first partition and am getting ATA DMA error messages 2 and on the console when running Ubuntu.

  When I had Vista on the first part of the disc I was getting a lot of errors on Vista.

  I ran check disk for bad blocks, but several seem to be coming.

  Last night I ran the test of the drive from the BIOS twice and twice got them the same "Test #2-07 failure" error message. The text is perhaps not quite correct, but the "#2-07" is certainly.

  Does anyone have a reference to what the BIOS messages mean?

  With the errors appear to come from the same part of the disk that would lead me to believe that it's the hard drive itself which is a failure, but I want to be sure that it is not the disk controller until I get a new hard drive.

  It was close in the past, but we are now very careful to use only on a surface hard and keep the vents unblocked so I think I can have escaped heating problems that seem to dog these machines.

  If someone is under Linux, you can install the monitor CPU cmdlets and the temperature of the system that can sit on your desktop and show you the temperatures constantly. Very useful. Interesting to see the speed at which the processor gets hot when editing or video processing.

  Thanks in advance for any help.

  Andy

  Hi Andy,.

  The error message definetely is hard even though I'm not sure what #2 refers to other it can tell the difference between the short and complete test.  This, and the fact that more unusable blocks are appearing constantly in all point to the failure of the HARD drive.

  Best wishes

  DP - K

• How do we uninstall sound card from the bios on a Satellite L40?

  I bought a Creative Soundblaster 5.1 and install having problems with him. The technical team was advised to uninstall or diasble internal sound card via Device Manager. Tried and every time computer re - starts the sound card is re-installed.

  The team informed that I should uninstall it from the bios. I have only a very basic knowledge of computers, it would be appreciated if someone could point me in the direction of the instructions, or guide me through it.

  I have a portable Satellite L40 and Vista works on the computer.

  Thanks in advance.

  Hi Paul

  I got some bad news! You can't disable the sound card in the BIOS. The BIOS for laptops is just different as BIOS for the desktop PC and the menus are not the same.

  +*@McMadkat*+
  Please don t be angry with me, but I think that your suggestion is wrong.

  The sound card may be disabled in the Windows operating system device manager

• How to enable Hyper-v from the BIOS in book pro 430 G1

  In fact, hyper-v has a tick perfect on windows 8 but when I start windows mobile emulator it gives error hyper v and then I tried to go from the bios, there is no option for hyper v then how should I allow it?

  Can you put a picture of the BIOS screen you see?

  You should be able to activate the virtualization of in the BIOS. Do you use the BIOS as an administrator?

  I suggest that you update your BIOS to the current version. This should return the ability to enable virtualization.

• Can E540 - I disable discrete gpu (Optimus) from the BIOS?

  Hello.

  I think with the purchase of a Thinkpad E540 with a gpu discrete nvidia.

  I intend to install linux on it and I really need optimus for him (nor is it well supported), but sometimes I'd like to be able to use it under windows.

  I would like to know if it is possible to completely disable the gpu nvidia from the BIOS so that it only works with the intel integrated an or should I buy one with gpu intel only.

  I read that the lenovo changed the implementation of bi - gpu on the newer generation thinkpads.

  I did some research but I couldn't know exactly what are the BIOS options; most of the results are on older laptops of gen.

  If any owner of this specific model could anwser would be great

  Please attach a screenshot of the settings of the bios if possible.

  Thank you.

  When you switch to discrete nvidia fits in the lowest power state, basically it is turned off. It will not be displayed in the Device Manager.

• How do I access the system restore from the bios my 32-bit vista starts up?

  I have vista home basic 32 bit and recently uninstalled a program I have used barley I used uninstall programs. It then prompted me pourredemarrer my computer after doing so, I am nowunable to pass the 'lights', he goes to Jordi screen w / mouse enabled if she sits for a while, a screen saver in vista can be seen.
  He will not start in safe mode. chkdisk ran, and I thought for sure he was going to "start, but didn't."
  can anyone help? I have not my install discs because they were lost in a recent move, thanks joe

  Hello

  You can not access the system from the BIOS recovery.

  F8 boot Options is your hope, but you say that they do not work

  You need a Microsoft DVD to do a startup repair, or a restoration of the system, thanks to this Guide.

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  See you soon.

• TPM options disappear from the BIOS

  We use MBAM to manage our devices for Bitlocker TPM and once the user restarts the PC, he is invited to the recovery key.  On the problem PC, we found that the TPM settings no longer even not in the BIOS.  The PCs encrypted with success if the TPM was working but now ceases to exist.  Does anyone else know totally TPM module options disappear from the BIOS?  Any possible solutions?

  Thanks for the reply of Larson, but we found that it had to reflash the BIOS for the device to reappear again.

• WHERE to download and how to install windows 8 oem and register with the key from the BIOS

  My friends sony vaio has been formatted it has not support recovery pls tell me WHERE to download and how to install windows 8 oem and register with keys from the BIOS

  My friends sony vaio has been formatted it has not support recovery pls tell me WHERE to download and how to install windows 8 oem and register with keys from the BIOS

  See here, make sure you download the correct edition:

  http://dellwindowsreinstallationguide.com/download-Microsoft-Windows-and-Office/Download-Microsoft-Windows/download-Windows-8-1-retail-and-OEM-ISO/

• HP Pavilion 500-130DE: HP Pavilion 500-130DE do not see the graphics card in windows and can not change the primary graphics card.

  So I got a new (TG 640) graphics card for my pc. I tested it on another computer the day before. Worked well. I plugged my HP Pavilion 500-130DE and started. I changed my slot onboard DVI cable to the GT 640 and cable says no signal. While the pc was still on I switched the cable back to the integrated graphical location motherboard and got the windows login screen. So I thought that BIOS yet configured when the integrated graphics card (Intel HD 4600). I turned off the pc and booted to BIOS. But I've never seen a such limited BIOS before! Only thing you change is boot order. I saw a tab advanced but could not find the settings that I needed. In the only device manager devices that appears is the HD 4600. So I checked power is 300W should be sufficient for a map of 75W (only need the PCI for power). Someone knows how to fix this?

  Hello

  After the PC starts to open the window RUN and enter: MSINFO32

  If the BIOS on your PC version is version 8, and then review the information below.

  HP Secure Boot Windows 8 themes Computer does not start after the installation of a video (Windows 8) card  

  A word of warning: the reality is that there is no guarantee that any particular graphics card will work in any particular PC, even if the graphics card works in other PC or even the same or similar model PCs. Know what the return policy is before you buy.

  Thanks for posting on the forum.

• Pavilion 500-242ea: x 5 component the Fans Running constantly - seems more noisy for me - is that true?

  Hello

  Have had a unit of 500-242ea Office Pavilion, a little more than 12 months now, but I remember it is much quieter when I bought it

  Currently, all 5 fans operate constantly, which seems to be at full speed.  Is this good?  I'm not crazy, I know fans need to run components cool but I didn't know that all 5 had to operate at this speed!

  Notes: I'm not a gamer and do not exploit several programs at the same time, all that often, so do not insist on CPU etc.  The unit is clean / dust-free, inside and outside, and there is no problem of heat sink, I noticed

  Graphics card was recently replaced (due to grinding noise on start up) under warranty but replacement is not stronger than the previous unit

  Can anyone suggest, if it is possible to adjust, reset or control the fans via BIOS or if there is another way to reduce this noise nuisance?

  Thanks for the advice offered

  Hello

  Being a "student of honour here, I don't know how to tag my question as"Resolved."

  In any case, for someone who is having a noisy fan problem, you can give what I've done, a go

  1 / restart PC Desktop, tapping f10 key as it works to begin with, it penetrates into the BIOS menu

  2 / take a look at all the options related to food.  I took a look at the "Thermal" CPU, but please note that I have not made no changes to anything!  I have not noticed, any menu for changing fan speeds

  3 / choose option "exit without saving the changes.

  If you're lucky, as I now have a silent computer near

  Aaaah... happiness

• Pavilion g7 2325dx: info from the BIOS for a correct start of the drive to a new hard drive windows

  My hard drive is dead and he needed replacement. Did. Had initially been Windows8, but upgraded to Windows 10. Impossible to re boot with drives of resettlement. Need BIOS startup specs, screen info to use disks.

  Hey Bettyboophume,

  No worries! If you have recovery media, you should be able to put it in and have the laptop back on it. However, just in case where that is not the case for you, there is a document called configuration of the Boot in the BIOS system order.

  The boot order can be configured on the Advanced tab in the BIOS Setup menu. The procedure for changing the boot order may vary according to the model of the computer.

  HP Pavilion Notebook PC Maintenance and Service Guide of g7, on page 90, Chapter 7, backup, restore, and recovery (Windows 8) you will see that it says:

  Change the order of computer startup if the computer does not restart in HP Recovery Manager, you can change the order of the computer startup, which is of the order of the devices listed in the BIOS where the computer searches the startup information. You can change the selection to an optical drive or a USB flash drive.

  To change the boot order:

  1. Insert the HP Recovery Media, that you have created.

  2 restart the computer.

  3. press on and hold esc while restarting the computer and then press f9 to boot options.

  4. Select the optical drive or you want to boot from USB flash drive.

  5. follow the on-screen instructions.

  I hope this helps!

  I would like to know how it goes

• I want to use the recovery disc for re - install my pavilion dv6, but cannot boot from the recovery disc?

  Now my system Windows 7 Home premium canbe accessed, but with a lot of problems. That's why I want to reinstall it. I burned my own recovery (totally 4 disks) successfully disks. I insert the first disc of recovery CD-rom and restart my laptop, but it can not recognized but in win 7 automatically. could you tell me how to use my recovery disks to reinstall the system win 7 when that is not totally broken?

  Hello

  Probably go to BIOS and configuration of the machine to boot from the CD/DVD ROM. Please follow the instructions from HP:

  http://support.HP.com/us-en/document/c00364979

  Kind regards

• ComboBox button that inherits from the skin - how to override

  Using Flex Builder 3.

  I've set up a button style in the style sheet so that all the buttons look for more up and down skins.

  The problem is that no matter what I can not do the ComboBox will not use the skins defined for the button.

  Is it possible to replace the skins do not use a skin.  I've implemented a specific style for the ComboBox control, but it takes always the button skins.  I tried both using ComboBox for the descriptor of style and a style specific name as Mazonedelistederoulante and set the style on the drop-down list box in the mxml.

  What is strange, is that literature it does not resemble ComboBox inherits all the styles button.  If it makes no sense at all.

  Any ideas?

  Thank you

  Cindy

  As combobox has a downarrowButton which is a class of button, it will expand the skin that you defined for the button, you can reset it by

  ComboBox
  {
       up-skin: ClassReference("mx.skins.halo.ComboBoxArrowSkin");
      over-skin: ClassReference("mx.skins.halo.ComboBoxArrowSkin");
      down-skin: ClassReference("mx.skins.halo.ComboBoxArrowSkin");
  

  Another way is not to use the CSS type selector, just set a class name to help your skin to custom button and set the class name for each button

• HP Pavilion 500-120F do not see the graphics card!

  
  

  Hello:

  Have you changed the settings of the BIOS 2 required before installing the video card no HP, you bought?

  http://support.HP.com/us-en/document/c03653200