HP Pavilion a6745f stop error message

Similar Questions

• Satellite A100 - recovery will not be finished and stop error message occurs

  Satellite A100-S2211TD, OS is Windows XP Home Edition of recovery disk,

  I have updated the BIOS to 2.20 and laptop was working fine. The old installation of Windows factory has worked well.
  After a few weeks, I tried to use the recovery disk to remove the noise from the HARD drive.
  The recovery of disk task completed and the computer restarted.
  I got the stop error message
  STOP: 0x0000007B (0xFA335528, 0xC0000034, 0x00000000, 0x00000000)
  I removed the memory that I have entered over the past two years and return the PC in the factory scene.
  However, recovery will not be finished (he worked to restore).

  I am able to boot in dos with a separate boot disk (Dr. back, windows does not start, not even in the safe control mode) and I did chdsk of the disc and disc is fine.

  I've never used before recovery disc, the only thing different is BIOS 2.20 instead of 1.50.
  WEB of TOSHIBA said that if you upgrade the BIOS most 2.00 you can not return to 1. XX

  Thank you
  g

  Hello

  The A100-S2211TD doesn t support the Intel Chipset!
  This laptop was equipped with the ATI graphics card and the graphics driver on the Toshiba page contains us the graphics driver and chipset driver!

  Have you received 100% good recovery CD?

  In your case I would try to install Win XP from the Microsoft CD to check if the same error would appear if no drivers are included in the CD of the OS.

  Check it out

• Black cartridge HP PSC 950XI all-in-One HP 78XL mark stop error messages.

  Black cartridge HP PSC 950XI All - In - One HP 78XL mark stop error messages "" error: installed incorrect color cartridge ";" "" Install the color cartridge"and"install the color cartridge. I cleaned the contacts on the printer and cartridge and printhead. Cannot make it work.

  I've tried everything and still get error messages that continue to change so I can say that things are get cleaned but this cartridge is just not good. I ordered more than HP 78 and 78XL cartridge. If they show mistakes I'll let you know. Thanks for the suggestions, there was one that I had not tried before so I will certainly remember.

• I put the machine into hibernation and when I restarted, I got a blue screen with stop: 0 x 00000024. Restart gave a different stop error message: 0 x 00000050.

  Original title: Blue screen problems - Stop 0 x 24 and 0 x 50

  I'm not being updated hardware or software on my Dell Latitude D8380.

  I ran the Windows tool to check if the laptop is suitable for upgrading to Windows 7, but did not install any software.

  I put the machine into hibernation and when I restarted, I got a blue screen with stop: 0 x 00000024 (0x001902fe, oxba4f7948, 0xba4f7644, 0xb9d31ae8) ntfs.sys address b9d31ae8 base at bpcef000, datestamp h8025be5.

  Restart gave a different stop error message: 0 x 00000050(0xffffffff,0x00000000,0xba1bef42,0x00000000) i8042prt.sys address ba1bef42 base at ba1b8000, date stamp 48025c 67.

  Please can you help. Thank you, Sue Dixon

  Hello

  Step 1: Check if you are able to boot in safe mode. If you are able to boot into safe mode, and then try to perform the clean boot to safe mode and check.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Run the check disk hard disk command. (You will be able to try this step if you are able to start in safe mode or in normal mode with success)

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Let us know the status of the issue.

• Received error BSOD, ran Diagnostics, got the error code 2000-0146, tried to boot from different HARD drive, got the same stop error message

  So my friend gave me his computer dell laptop. The thing would boot normally for a few days until he would give me a blue screen of death with the "UNMOUNTABLE_BOOT_VOLUME" message constantly to not even upward. I ran the diagnostics and got the error code 2000-0146. What I've read, this code error means that the HARD drive is bad and must be replaced. So, to make sure that it's the hard drive, tried to boot from an old hard drive, I got around the installation by USB and windows gave me the same stop error message. May - so that means it's a motherboard problem?

  No, it isn't - unless the operating system was installed on this drive AND the system in question, that it won't work as a bootable drive.

  Unplug the system, remove or disconnect the battery and hold the power for 30 seconds approximately.  Turn on and re-run the diagnostic tests - if the same error appears again, the drive is bad.  Replace it.

• Pavilion DV7 start error message - unable to start BTVSTACK. EXE, BTBIP. Missing DLL

  I have a Pavilion Dv7 (A3F83AV) running windows 7, 64 bit and recently to get the error message at startup telling BTVSTACK. EXE cannot start as long as BTBIP. DLL is missing.  I found that this has to do with the bluetooth, but I'm not sure which is better to corect this issue. Any ideas how to solve this problem?

  Thank you

  Hello:

  I want to try and reinstall the bluetooth driver and software for the wireless card model that your laptop uses the support page and the driver of your laptop.

  If it's an old dv7 notebook that has the HP bluetooth separate module, then install the HP software for your laptop. support and driver page of s.

• Vista Stop error message: 0XC012001D after the installation of Windows updates.

  Original title: vista stop working

  Hello

  I need help on vista, because I update and restart and stop working and appear this error code:

  !! 0xc012001d! Registry\Machine\Components\DriverData...

  Hello

   

  
  1. remember the number of the update you have installed?
  2. could you give us the exact error message?
  3. Once you get this error message? Are you able to boot to the desktop?

   

  Method 1.
  Please check if you face the same problem when recording in safe mode. It is a possibility that one of the non-Microsoft application or driver is causing this issue. Start in safe mode and make sure that us. If you are able to start properly in safe mode, we can perform a clean boot in order to find the root cause.
   
  Step A.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows Vista Advanced Boot Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to start in safe mode of Windows Vista.
  e. when Windows starts, you will be at a typical logon screen. Connect to your computer and the Windows Vista goes into safe mode.
  f. do whatever tasks you need and when you are done, reboot to return to normal mode.
   
  Step B.
  If it works fine in safe mode try performing a clean boot in order to find the cause root.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
   

   

  Method 2.
  Best thing you can do is to perform a system restore just before where the problem occurred.
  I have listed a few articles that explain the system restore in Windows 7.
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  
  System restore
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Thus, the article above is applicable to Windows Vista.

   

   

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I get the following when starting my laptop Dell - stop error message: 0x000000ED (0 x 84308900, 0 x 00000000, 0XC000009C, 0x00000000)

  Hello

  Since last night I get the above error message on my computer at startup.

  I can not start in any other mode and tried to use the recovery console (starting on the DVD) using FIXBOOT and CHKDSK /R but still no luck.

  I also tried searching on the error code with no luck.  I recently bought an IPOD but was already using itunes and the computer worked very well after the IPOD synchronization.

  I'm stuck and would be grateful if someone could help me solve this problem.

  THX,

  Eliot

  It is proably a record broken. Restart your computer and press F8 when Windows starts to load. Select the last known configuration of God in the menu, then press OK. I had the same problem, and that it resolves. Maybe a program to train register is broken.

  ---------------------------------------------------------------------------------------------------------------------------------
  If the answer can help, mark it as "useful". He he has solved the problem, mark it as 'reply '!
  Andy

• Blue screen stop error message. __

  I'm in serious trouble. I use Windows XP service pack 3.

  I reloaded the OS after formatting the hard drive. all measures have been taken as advised. I was not able to detect the device that is causing a FALSE START of the windows and then blocking the operating system while I do a lot of work.

  The following error report is generated any time well.

  BCCode: 1000008e BCP1: C0000005 BCP2: 00000004 BCP3: A699DC68
  BCP4: 00000000 OSVer: 5_1_2600 SP: 3_0 product: 256_1

  C:\DOCUME~1\SIDDHA~1\Locals~1\Temp\WER9f80.dir00\Mini020311-01.dmp
  C:\DOCUME~1\SIDDHA~1\Locals~1\Temp\WER9f80.dir00\sysdata. XML

  Hi pays.

  You may receive this error message when Windows tries to use incompatible device with Windows XP drivers.

  Follow the steps listed in the article mentioned below to solve the problem:

  Error message: the system has recovered from a serious problem

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Laptop keeps crashing after 3-5 minutes of availability and receive the blue screen STOP error message: 0x000000F4.

  Original title: Windows 7 Home Premium Bluescreen

  My laptop crashes after 3-5 minutes of availability and then I get a blue screen

  STOP: 0X000000F4
  I downloaded the minidump here:
  https://SkyDrive.live.com/?CID=4a15f2921dfaa4f1&ID=4A15F2921DFAA4F1%21108&AuthKey=! ALOKHvhX1bvbZEc
  as well as a log of driverview:
  https://SkyDrive.live.com/?CID=4a15f2921dfaa4f1&ID=4A15F2921DFAA4F1%21107&AuthKey=! AD1fvwA1rk6pxFg
  Tom

  Hi Vashem,

  The error STOP: 0x000000F4 can occur for several reasons. There are many reasons why your system may crash because of these screens to stop errors\Blue. The most common scenarios are: faulty drivers, hardware problem (especially RAM). In this case, the issue could be due to the motherboard is heated.

  Check firmware and system disk controller BIOS settings are correct and that the storage device has been correctly installed.

  Method 1: The problem is possibly due to material of unsupported disk controller. Check if BIOS (Basic Input\Output System) is set to IDE. Enter the BIOS and check the settings. Change the SATA to IDE option (if available). You can view the manual to do the same thing.

  Note: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly.

  Method 2: Disconnect any external devices from the computer except for the mouse and keyboard and check if that helps.

• 9.3.4 update Stop error message

  When I try to upgrade from Acrobat pro 9.3.3, 9.3.4. I get a blue screen stop error. I receive a Driver_IRQL_Not_Less_or_Equal and dump. The stop error looks like this judgment; 0x000000D1 (0xFFFFF88011E00000x000000000000000E, 0 x 0000000000000000, 0xFFFFF8801019CB6E).

  I'm running Win7 64 bit and the only thing I can do is a restore to get windows running again. I tried to do a repair on Acrobat 9 pro, but it doesn't matter. Since it is a serious security update, I'm worried about being stuck in the version 9.3.3. Any suggestion would be appreciated. My version of Acrobat 9 comes with Master CS4 Suite if that helps.

  Have you tried to do a manual download and install?

  All the updates of Adobe, start here and select the product http://www.adobe.com/downloads/updates/

• Stop Error Message "Failed to parse the SQL query" appearing

  Hello
  
  I have a sql query that is built into a string and then compiled and executed at run time. This query lies in a region and is returned.
  
  The query uses a view that uses a database link. If the link of database falls down for some reason, the "Failed to Parse SQL Query" message and the details on the DB link not working. However, I want to be able to implement my own error message when this happens, but I can't find a way to capture the error. I have put an exception handler in the region but because the code is technically correct and only fails at runtime that is not catching it.
  
  Is anyway to catch this error and display my message?
  
  Thank you
  -Mark

  Hello

  Try to use condition to hide the region and instead of this report will show another area where is your custom error message?

  BR, Jari

• I receive a STOP error message: Error\systemroot\system32\htdll.dll hard c000221 unknown

  When I turn on my Dell Latitude D600, I get a message that begins with

  We apologize for the inconvenience, but Windows did not start successfully...

  then Windows starts, then a quick flash of a blue screen with the error stop listed above, then the dell screen, then her we apologize screen

  AGAIN AND AGAIN AND AGAIN.

  Help!  This can be corrected?

  Hello

  1 did you change on your computer before the problem?

  I suggest that you follow these steps and check if the problem persists.

  Step 1:

  Start your computer in safe mode and check if the problem persists.

  Step 2:

  If your computer starts up fine, I would say that you start your computer in a clean boot State.

  Note: The steps in the article to restart your computer in normal mode.

• Stop error message

  HP Photosmart B209A more

  Windows 7 (64-bit)

  Occasionally when printing a report from Quicken or when you print a PDF document, printing stops and I get following error. 'To avoid damage, use the close button. Do not use a plug to close'. When I click OK on the touchscreen, the paper is ejected. I can switch to another PDF document just for the testing process and one other document will print ok. Don't know why I get the message closed when I'm not trying to stop completely, just print a document.

  Please read this post then provide some details.  How is the connected printer - USB, LAN, LAN cable wireless, bluetooth? It seems that the printer is lost communication with the short computer and seem to be disabled.

  What print mode do you use?  Quick project puts the most pressure on the printer power.  If you use make Fast project course that the printer is plugged directly into a wall outlet and is not connected by a surge power strip.

• A stop error message Skype work.

  Hi guys, I had a problem with my Skype application.

  Wen I open Skype just freeze and said "Skype has stop working.

  And the error in the event viewer:

  Name of the failing application: Skype.exe, version: 6.18.59.105, time stamp: 0x53b40009
  The failed module name: mshtml.dll, version: 11.0.9600.17207, time stamp: 0x53a22b71
  Exception code: 0x4000001f
  Offset: 0x00c1a138
  ID of the process failed: 0 x 950
  Start time of application vulnerabilities: 0x01cf9ecc3b0e20f7
  The failing application path: C:\Program Files (x86)\Skype\Phone\Skype.exe
  Path of the failing module: C:\Windows\SysWOW64\mshtml.dll
  Report ID: 7d79dbfb-0abf-11e4-8e3e-94de80e49f29

  What I have to do, so I can fix Skype. Please help me.

  The problem is with your Internet Explorer (IE11).

  Now try IE11 uninstalling and reinstalling IE9.

  In order to uninstall IE11 you should go to the Windows Control Panel-> programs and features-> view installed updates-> Microsoft Windows-> Internet Explorer 11.

  See also this similar case:

  http://community.Skype.com/T5/Windows-desktop-client/Skype-crashes-on-startup/m-p/2543719/highlight/...