Device unidentified USRP 2921 (not listed is not in the utility of Configuration of NOR-USRP)

Similar Questions

• The remote device or resource does not accept the connection

  I have a desktop computer Windows 7 connected to my router via an ethernet cable, but when I try to go to a website on Google Chrome as Google.ca, loading the page forever without even showing the page. Finally after a long wait, it finally says that the Web page is not available. I tried to go to the Web sites by using Internet Explorer, but occurs the same result. I tried to troubleshoot the problem and it "the remote device or resource does not accept the connection" is detected, but does not set automatically. I have a wireless printer connected to my router which is online and works very well. I can even connect to my router page. But still no access to Web pages don't like my outlook.com and etc. Sometimes a go open the network and sharing Center to change the settings of the card and disable the wired ethernet only to activate it again. It works only a few times, and it's really frustrating, because it is the only computer that does not connect to the internet, even with a ethernet cable. Please find a solution as soon as possible. Thank you.

  Hello Kyle,.

  Your computer is connected to a domain network?

  If your computer is connected to a domain network, then, I suggest you follow the link below to post your query in the TechNet forums, because they have more expertise on this issue.

  Forums TechNet for Windows 7
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Otherwise, try to follow the following suggestions to solve the problem.

  "Internet Explorer cannot display the webpage" error

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

  Also refer to:

  The remote device or resource does not accept the connection

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• Is there anyway that I can update all my devices. I do not use the Device Manager by clicking one at a time.

  Is there anyway that I can update all my devices. I do not use the Device Manager by clicking one at a time.

  I have windows vista 32 bit.
  -------------------------------------------------------------------------------------------------
  Re-edit:-I do not use the Device Manager to find all my drivers and by clicking on each of them... one at a time update.
  Y at - it another way to find and update the drivers at the same time and for free.

  Your question is too terse and contains too little information for anyone to
  help you.  Read this article and try again:

  http://support.Microsoft.com/kb/555375

• Connection problem diagnosis - "the remote device or resource does not accept the connection detected.

  My computer is a Windows Vista Home Premium 32-bit. The problem occurred about 2 months ago, while he was still in Vista, but please note that I've upgraded to Windows 7 last night and the problem is always the same.

  My Internet Explorer, updates to the computer, iTunes and everything, EXCEPT my AOL, does not work. My connection says 'excellent '. (Hang everything on my laptop to my wireless are works fine, that my office is having this problem)
  When I click on Internet Explorer, it says "Internet Explorer cannot display the webpage", and when I click on "analyze the connection problem" said "problems discovered - the remote device or resource does not accept the connection detected.
  I talked to my internet provider Comcast all morning this problem: she said that his side internet connections work properly. She walked through me steps including reconnected the router cords, control the way in which the Internet is put in place and other things, but everything was how it was supposed to be. She suggested that maybe AOL could be the problem and to remove it because I used it, so I did, but nothing has changed. So then she told me to contact Windows... (not sure how to call technical Windows supports without having to pay $59?, but found this forum)
  Is anyone familiar with this problem and could you please help or at least point me in the right direction?
  In addition, please let me know if you need any other information on the problem.
  Thank you
  Lily

  Hello

  Try the steps from the following link

  http://support.Microsoft.com/default.aspx/KB/956196

• the remote device or resource does not accept the connection - CIMC

  Hello

  I tried access MMIC remotely via web browser, but get the error message "the connection was refused by the target device.

  I was able to access a device similar to the same place but will not be for this particular device.

  Another diagnosis with internet explore came with reason "the remote device or resource does not accept the connection.

  Any idea please?

  Thank you

  Hi Mike,.

  Is the host this time online? Are you able to ping the server MMIC? If you are able to ping the server of CIMC, but unable to connect via SSH or the graphical user interface you can hit the following bug;

  https://BST.cloudapps.Cisco.com/bugsearch/bug/CSCun88303/?reffering_site...

  I hope this helps. Please check all the useful answers as correct while others can find answers faster.

  Qiese Sa'di

• IE9 "the remote device or resource does not accept the connection.

  IE9, "the remote device or resource does not accept the connection" appears when you try to open any website. My office to tell me that it is connected but cannot access any www. Meanwhile, my laptop connects fine. I have reset the settings in the internet options does not. I downloaded 'team' to connect (or similar) and asked for a connection and I thought that suspicious so uninstall this program... leaving me without access to the internet... * sigh * please can someone help me?

  Hello

  
  Method 1:
   
  Step 1:
   
  Run the network troubleshooter and see if that diagnoses the problem.
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
   
  Step 2:
   
  Reference:
   
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  See also:
  How can I troubleshoot network card?
  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems
   
  Method 2:
   
  Temporarily disable antivirus programs and firewalls.

  Disable the anti-virus software

  
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Windows Firewall
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Firewall

  http://Windows.Microsoft.com/en-us/Windows7/firewall-frequently-asked-questions

  Note: make sure that you enable the antivirus software, other security and firewall after the test programs.

  Warning:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   
  Display the results.

• "Devices and printers" do not show the printer on LPT1

  I recently added a printer on parallel port LPT1: on my PC running Windows 7 Home Premium 64 - bit edition.  The installation was successful.  I can print a test page and you can use the printer from applications, including Notepad, Microsoft Word 2010, and command prompt.  I find it puzzling, however, that the printer does not appear in the list of printers in the "Devices and printers" Control Panel applet  Is this a bug in Windows?  Microsoft has a fix available?

  Hello Tony,.

  Thank you for your reply and sorry for the late reply.

  Sometimes, this problem appears when printers or other devices using the same driver and port on Windows. When you view the printers installed in "Devices and printers", you may notice that some of the printers or other devices are grouped and are associated with the same printer icon. Scenarios like two or more printers are installed using the same printer and installed driver with the same printer port (i.e. LPT1) shows this kind of behavior.

  I suggest you follow the steps described in the article below to get this matter resolved.

  Printers using the same driver and port on Windows are grouped as a reporting in devices and printers.

  http://support.Microsoft.com/kb/2015694/en-us

  Registry warning : To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/en-us

  I hope this helps. Please let us know the State. Feel free to write us again for any further assistance.

• The device name is displayed not in the newspapers of the Administration

  I chose to have the R7000 email logs to me every night.

  Unfortunately, I noticed that the newspapers do not include the name of the device as well as MAC and IP addresses for each entry.

  I can see the device name in the genius of Netgear-> screen of connected devices, then why are they not available in the papers sent to me?

  Thank you.

  Oh! I apologize, but it does not include those.

  What follows is the only will be included:

  

• WINDOWS MEDIA PLAYER SYNC ALWAYS SAYS "ALREADY ON THE DEVICE" WHEN HE IS NOT ON THE DEVICE.

  I went on wmp to sync mp3 files on my Creative Zen MP3, but when I try and synchronize it always already says "on the currency." But when I check my mp3 songs are not on the device. If anyone has a solution please tell me.

  Hi QALY,

  Formatting the player Creative Zen MP3 should help you solve the problem of synchronization.

  Note: Formatting the player Creative Zen MP3 will delete all the data on the MP3 player. Make sure to save your songs before formatting the MP3 player.

  After formatting the MP3 Player try to check if you can sync without any problems.

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• I do not mean teamspeak, and when I test my device, I get "could not play the test tone".

  But I still hear sounds. I do not only teamspeak. I tried to change playback teamspeak, but it does not work. Another thing I play, I can hear very well. Anyone know the solution?

  Hello

  1. If it works much earlier?

  2 has there been recent changes made on the computer before the show?

  Please follow the steps below and we update with the results.

  Method 1: I suggest you run the audio Troubleshooter and check.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Method 2: Turn on all audio sources and control.

  a. go to control panel.
  b. sounds and Audio devices.
  c. 'Volume' tab, click on "Advanced" in the section "the Unit Volume."
  d. try without inhibition, all audio sources, if none of them are dumb.

   

   

  Method 3: You can check that the listener is set as the Default Communication device and then check the issue.

  To do this, do a right-click the sound icon in the system tray and select playback devices. Then, right click on the headset on the reading tab and then click set as default Communication device.

  Alternatively, you can try to uninstall and reinstall the audio device driver and check the status.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  For more information, see the article and check.

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-in/Windows7/tips-for-fixing-common-sound-problems

  Let us know if it helps!

• Your device blackBerry smartphones does not satisfy the requirements of the system

  Hi, I just bought the curve 3G and I am trying to download app world but I get the message «Sorry, your device does not meet the system requirements that are needed to support Blackberry App World» I checked and I meet all the requirements. I am from Cyprus, having a service plan with MTN, greater than 4.5 and trackpad software version. Do you know what could be the problem?

  A BlackBerry data plan is required to use many features on your BlackBerry.  Basically, without a BlackBerry data plan, just what you can do is to call and send text messages.  Everything else, including BlackBerry Messenger, e-mail, surf the internet, requires additional features of a BlackBery data plan.  The plan that you currently have, even with the internet, is not sufficient on your BlackBerry phone.

  Different carriers have different levels of plans so make sure you tell your carrier you want to do on your phone so that the right plan can be proposed to you.

  I hope it explains quite well for you.

• Windows 8 is unable to connect to the internet message: "the remote device or resource does not accept the connection.

  Hello! I'm hoping to get clarification on the issue, I'll have.

  So, I restored my Toshiba PC to its factory for another question settings, I tried to solve. Now when I connect to my network (which is fully functional on other computers, you mind) it says it is connected, but every time I try to go to a browser through the wireless, it says "this page cannot be displayed", the URL has no importance. I searched for hours all the different suggestions and none of them does not seem to work. When I plug the Ethernet cable, it does not work.

  Can someone help me?

  Thank you

  Pete

  Hi Peter,.

  What web browser you use to access the Internet?

  If you use Internet Explorer, then I suggest you to try the steps from the following link:

  http://support.Microsoft.com/kb/923737

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Take a look at this link and change the proxy settings.

  http://Windows.Microsoft.com/en-GB/Windows/change-Internet-Explorer-proxy-server-settings#1TC=Windows-7

  Applies to Windows 8.

  Come back and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Error in the log of the events - the device, \Device\Ide\iaStor0, did not within the time limit.

  I get the following error log of events on a daily basis:

  "The device, \Device\Ide\iaStor0, did not in time-out."

  There are a few hits on Google, but none has provided a solution.  Any suggestions?

  Here is my system info:

  Vista Business SP2

  ThinkPad T500

  Latest updates of Windows and updates from Lenovo

  Intel has released a new driver Intel® Matrix Storage Manager 8.9.0.1023 version on 17 July that corrects the error in iastor you and me become.  I installed the new driver, and I no longer get the error in iastor.

  http://Downloadcenter.Intel.com/Filter_Results.aspx?strTypes=all&ProductID=2101&OSFullName=Windows+V...

• Error message: the remote device or resource does not accept the detected connection

  I had this problem for months at this point. The common way with that I solve is to restore to a previous point. Once restored, but I can't stop or restart the PC without the same problem occurs. For this reason I only turn sleep mode and then the connection is working. But by mistake an update made me restart automatically and now I'm back to the previous question. I downloaded and saved a substantial amount of data from my last restore, so I was wondering if there is a practical solution to this problem?

  Original title: perfect connection, but can not use the web or programs that require connections

  Hello

  Thanks for posting your question on the Microsoft community.

  Who are you referring when you say, "web or programs that require connections"?

  It seems that your antivirus software is blocking the connection internet or computer is infected with a malware or a virus.

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the network troubleshooter

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, then use method 2.

  Method 2:

  You can disable your antivirus and check if it helps.

  Reference:

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows/disable-antivirus-software#1TC=Windows-7

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  If the problem persists, use method 3.

  Method 3:

  I also suggest you use Microsoft security to check the virus or malware scanner.

  Refer to this article:

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• I can't connect to my router and my system XP Pro/SP3 has NOT installed the automatic Wireless Configuration service. How can I get that re-installed?

  I have the latest driver for my Linksys WPC54GS PCMCIA card. The Linksys software does not support WPA security, which supports my rout (and I do not want to use WEP).  The zero wireless Configurator, this is what I need, but the service is not installed on my Windows XP Pro w / SP3 System.

  Hello

  You need not be. I posted a link to google cache, so keep scrolling down, the answers are displayed below. It contains details on the manual creation of the registry key for the zero configuration service.

  You can also export to a working system.

  See you soon.