HP Pavilion DM1 4004sa - replace return

Similar Questions

• HP pavilion dm1 4004sa: Hp pavilion dm1 4004sa will not charge or turn on

  I recently got a used laptop from a family member, that we were in trouble. We replaced the battery which is partially charged, so it worked for awhile. However when that failed and we have tried to charge the cell phone. Nothing happened, it won't turn on and when the charger is plugged in nothing happened.

  The only thing that happens is when you plug the charger and try and turn it on, the little light beside the accusation taken flashes.

  Any ideas?

  As the power\charge LED does not illuminate, this means that either the power adapter, DC power on the laptop or the system board connector have a problem.

  If I were you, I would like to start with an AC adapter. You say it's one that you've inherited, a manner of speaking. A new power adapter costs way less than a new laptop computer. Find one online by doing a search with the HP dm1-4004sa adapter as keywords.  They are as inexpensive as $12.00. http://www.Amazon.com/DM1-4000EE-DM1-4004SA-DM4-1277SB-DM4-3052NR-DM4-3090SE/DP/B00Q8QMF3K

  Here, the research that I did is.. You must perform your own search because it will use more results local server.

  If the power light does not light, it's a diagnosis.

  A power\charge blinking LED means that the battery has failed, but no LED no battery me would right adapter.

• HP Pavilion dm1 Notebook pc: black screen

  My screen goes black when I start windows 7 on my laptop of Dm1 Hp Paviliom. Also, I have connected my pc to an external monitor via VGA cable, and then I can see the windows operating system in the external monitor. I did a test to start and then I got these results:
  Memory test: past

  Smart check: past
  Dst short: past
  Optimized DST: Software error
  Battery test: primary past secondary - has NOT been

  PCI device control: past.
  -----------------------------------------------------------------------
  Starting test: past
  
  Does anyone have an idea of this behavior? How can I solve this problem

  Hi @ljuserhpfor ,

  Thank you for visiting the Forums HP's Support and welcome. I appreciate all the information and the results of the tests that you did. I looked in your question about your HP Pavilion dm1-3025dx Entertainment Notebook PC and the laptop does not start. In my view, that the question is called the RTC battery. (Real TIme Clock).  Here isa document to show you how you can replace that.

  If you see things very well on a screen, it might be a bad driver has been installed. You can do a System Restore. System Restore will help if something is automatically updated and wasn't on the laptop.

  When running a system restore note remove all USB devices. Disconnect all non-essential devices because they can cause problems.

  Hope it will be useful.

  Thank you.

• HP pavilion dm1 - test memory failed

  My Hp Pavilion dm1, hangs as soon as windows starts. I went the system diagnostics and ran the development of the system, but it failed. Here are the results:

  Memory test: failed

  Failure ID: 9C4FNJ-5NU6J9-MFH15F-404303

  PRODUCT ID: LW200UA #ABA

  I don't know if I have a faulty memory module or if it is a problem that can be fixed with a system restore? Can someone help me please?

  Hello:

  You need to replace the memory module.

  Try first, remove and replace it.

  If you get the error, buy one with the same characteristics as the bad.

  If your laptop is still under warranty, contact HP technical support for a replacement of the faulty memory Strip guarantee.

  Make sure that you remove the battery and disconnect the laptop power adapter before working inside.

• EliteBook 8440p; DM1-3020us: 2x4gb 1600 MHz DDR3L works in Pavilion DM1 but not Elitebook 8440p? But both are supported than 1066 MHz RAM

  I have two Elitebook 8440p PCs that both run an Intel i5 520 m (although one of them has a discreet Nvidia NVS 3100 m, while the other does not and use the integrated graphics card Intel).

  I also have a Pavilion DM1-3020us with an AMD E-350 APU; It's the only other PC I own which takes SO-DIMM DDR3 modules.

  I just bought this Crucial DDR3L 1600 MHz 2x4gb hoping to use it with the 8440p without the graphics from Nvidia:

  http://www.BestBuy.com/site/crucial-2-Pack-4GB-1-6GHz-PC3-12800-DDR3L-so-DIMM-Unbuffered-non-ECC-lap...

  However, it causes crashes and BSOD as soon as he tried to start under Win7 64 bit on both 8440 p PCs.  Also when trying to boot Linux Mint 18 I empty a kernel panic, and run Memtest86 + just leads to restarting the PC within seconds.  Yet, I can navigate through the BIOS throughout the day and it will continue to work very well...

  But here's where it gets really weird - the RAM works perfectly fine in my laptop DM1 Memtest86 + and Win7 64 bit (I use it as I type this).  What's curious?  Because both the AMD E-350 and the Intel i5 520 m only support up to 1066 MHz RAM!

  The only thing I can think is that there is something wacky where RAM is unable to operate at 1066 MHz at 1.5V or is not able to run at 1.5V to all E-350 1.35v support (and 1.5V RAM so that the i5 520 m only supports 1.5V) which itself would be really strange that Micron (which actually manufactured the RAM) States on their website that their 1.35v and 1.5V RAM have actually the same die (a bit like mobile i7s quad vs quad I5S Office) and that both can operate at 1, 5V, implying therefore that the 1.35v product is simply a higher binning:

  https://www.micron.com/~/Media/documents/products/technical-note/DRAM/tn4114_ddr3_1_35v_1_5v_compat...

  Crucial live chat support, however, closed several hours for the day, so I thought I would at least make this post in the meantime.

  Hello:

  Please see this thread, and the discussion that I posted in this thread... and you'll have your answer.

  6550 b has the same chipset as the 8440p.  I posted the link to the site from NewEgg for the memory, you need to buy if you live in the USA/Canada in the discussion that I've referenced to the other person who had the 8440p.

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/RAM-memory-modules-that-actually-work-for-HP-EliteBook-8440p/m-p/5570634#M335108

  There are several discussions on this issue if you want to find even more.  Everything is solved by specific G.Skill memory I posted.

  The extent of why it works in the dm1 and not the 8440p, the chipsets are different.  The Intel chipset in the 8440p doesn't support voltage DDR3L.  Comparison of AMD and Intel chipsets are like comparing apples and oranges.

  I also believe that the chipset amd in the dm1 is more recent than the chipset in the 8440p and promotes low-voltage memory.

  I have just return from memory and use the gift card on something else.

  I doubt that Best Buy has this specific memory.

• HP Pavilion DM1-311oen / Star-Up error

  HP Pavilion DM1-311oen. Windows 7

  DST short: failure

  Failure ID: UO82XX-5HX6R3-MFH141-6OTSO3

  Hard drive 1

  My laptop not working at all.

  Hello

  Error code 24 characters for short drive Self Test (DST) would indicate that hard is defective and must be replaced.  This is also consistent with the question of commissioning.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  Kind regards

  DP - K

• wifi AC Pavilion dm1 cart

  Hello, I have a hp pavilion dm1 1010 ev with victory 8.1 and I want to change my wifi bluetooth with new with ca basket because my router's ac dual band, please tell me what type of this model.thx

  Hi @kroton,

  I understand that you are looking for a replacement of the WiFi card for your HP Pavilion dm1 - 1010ev Entertainment Notebook PC.

  According to HP Pavilion dm1 Maintenance and Service of Guide , there is no dual band compatible Bluetooth cards. You can try one, but I can't guarantee that it will work.

  I hope this information helps.

  Take care and have a great day!

• Pavilion dm1-3210us Notebook PC - RAM upgrade

  I have a Pavilion dm1-3210us laptop and want to upgrade the memory.  It came with 3 GB (a 2 GB and a 1 GB memory modules).  Can I replace the 1 GB with a 4 GB or which will cause problems?  I'm running Windows 7 64 bit and my manual says the laptop will have up to 8 GB of RAM.  Thanks for your help.  .. .and where the best place to buy at a decent price?

  Hello

  To ensure that you get any compatibility issues, it is usually best to install corresponding Modules - see the link below for a 2 x 4 GB kit.

  http://www.crucial.com/store/listparts.aspx?model=Pavilion%20dm1-3210us&cat=RAM

  Kind regards

  DP - K

• Pavilion dm1: HP Pavilion dm1 4020ew updates

  What is the most powerful processor can I place on HP Pavilion dm1 4020ew? Is - it possible to Exchange (upgrade) in this netbook processor? If the CPU is soldered (immutable)? Why isn't this information in the statement? At the moment it has AMD E-450, 8 GB of RAM and Windows 7 64 bit installed. Is it possible to change the amount of RAM for the graphics in this netbook?

  Series: (deleted content)
  ID: QJ538EA #AKD

  PS Sorry for my bad English

  @Nopanak

  Sorry, but you have to replace the entire system.

  Your manual here.

  http://h10032.www1.HP.com/CTG/manual/c03255380

  Page 23.

  REO

• HP Pavilion dm1-4142nr Memory Upgrade

  Hello

  I am about to buy the HP Pavilion dm1-4142nr of the Amazon and want to update to the maximum of 8 GB RAM. The problem is that I'm not sure if the one I picked up will work perfectly on the laptop, so I would be recognizing an Adviser on the issue. I would like to replace the existing RAM with Crucial 4 GB PC3-10600 DDR3 - 1333 MHz Laptop Memory Module Bundle - 8 GB, 1.5 V, 204 pin, latency CASE 9.

  Thanks in advance for the help.

  Hi, Niko:

  I want to save you money...

  According to the specifications of your PC, it already comes with a 4 GB module, so you only need another module of 4 GB maximum memory up to 8 GB.

  http://support.HP.com/us-en/document/c03210009

  The essential module that you posted must absolutely beautiful work, but simply get one of these 4 GB chips.

  Paul

• computer portable Pavilion dm1 freezes after appearance of the Office

  HP Pavilion dm1 mini laptop computer Windows 7 64 bit Home Premium edition.  Freezes the shortly after the desktop appears - no response from any action of the mouse or the keyboard.  Wireless signal-meter at the bottom right shows the circle of rotation and does not seem to connect, but turn off Wireless (button) has little effect.  At the restoration of the system to return two updates.  Antivirus software is uninstalled.  Memory test OK.  CHKDSK OK.  Works perfectly in safe mode with network.  No error message.  No new software installed recently.  Worked fine on October 7 - no symptoms of imminent failure.   Can you suggest a next step?

  The problem spontaneously resolved itself last night.  After a week of troubleshooting and research, the laptop is not cold as it had been.  Still, it worked fine in safe mode, but would freeze after Normal reboot.  I have not changed anything in these last days, other than to restart several times, in SAFE and NORMAL mode.  Finally this morning it worked normally without freezing during the night.  Not sure that the problem could be.  Made several updates to Java and Windows without problem.

• Pavilion dm1-4135ef / short DST failed

  My pavilion dm1 stuck at windows startup, the interface is black and PC is locked.

  When I do a start of test:

  memory test: PAST
  Smart check: PAST
  DST short: FAILURE

  I had a FAILED ID = MAHXVW-62472N-MFPX01-60R403

  This means, the hard drive is dead... but I would an exact details on id number of failure.

  Hi Hpepe,

  This failure code is a disk HARD error 303 "HDD 1 quick test failed." In your case, I would recommend allows you to replace our HARD drive.

  BR

  Zincas.

• Pavilion dm1: sudden closure

  Hi, Iv using this laptop since 3 years now.

  While its plugged in to the power supply, there is no problem. As soon as I take it off the power supply in a few minutes it stops automatically without any warning, showing piles of 100%.

  Help, please.

  @shivi2201,

  Thank you for the additional information. As I suggested before, the test says that the battery must be replaced.

  You can order one yourself if you prefer. HP Notebook PC - ordering of certified HP spare parts. References can be found in the HP Pavilion dm1 Entertainment PC - Maintenance and Service of Guide

  6 - cell, 55 Wh, 2, 55 - Ah Li - ion battery 646757-001
  3 - cell, 28 Wh, 2, 55 - Ah Li - ion battery 646755-001

  Or, you can use the following http://www.hp.com/contacthp and create a case for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps.

• Reset bios password for pavilion dm1

  Hello world

  I have a hp pavilion dm1, I put the bios administrator password and power on of.

  And, I forgot the bios administrator password. When try to enter a tree once it

  present the error 56528373.

  Windows 7 HP 32 bit

  prod n.o QJ516EA #ABU

  sys bios F.19

  some kind spirit can help me please!

  tanks

  Jose

  (jesus no c = JC)

  MCI Try.

  49480975

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• HP Pavilion DM1: Pavilion DM1 * clean * Win7 install... no COA sticker?

  My wife has an HP Pavilion DM1 is a slug running and I want to do a clean install of Win7 without all the bloatware that is come upon her, but realized that this little book is not a Microsoft COA top sticker to do the reinstall.  HP did ship of this machine without an activation code Win7 on it?  If Yes, is there a way I can get the code to make a * clean * install or should I just use the system recovery disk to go back to the factory?  I have a few old machines COA stickers, but did not burn one if I had to.  Any help/info is appreciated.

  You are the very welcome.

  The recovery disks should be pre-activated and there should be no need to enter a product key.

  But you will need to uninstall the bloatware that will be reinstalled, unless your recovery disks for a reduced recovery.