HP pavilion dm4 - 3013cl: Audio does not not after installing windows 10 'HELP! '

Similar Questions

• Audio does not work in Windows, Safari 5.1.7 - Captivate v8 (HTML5)

  Audio does not work in Windows Safari 5.1.7 for my project CBT created in Captivate v8 and edited in HTML5. Need help urgent to solve the problem.

  You have installed QuickTime?

  End-users using Safari will also need QuickTime.

  Apple ends Safari for Windows support in 2012 with 5.1.7.

• AutoComplete doesn't work does not after installing IE *.

  AutoComplete URL function works does not after installing IE8.  Looking at the Advanced tab properties IE I see an option to use AutoComplete (which is
  ticked off) but it is said to "..". turn of Internet Explorer".  Whatever that means, and how I seized not semi-automatic work again under IE8?  I can go back
  for IE7, if it's the only way.   I tried to hit "reset" on the Advanced tab I saw a thread on try this - but no go...  Thank you

  sjakulski,
  Thank you for visiting the Microsoft Answers community forum.

  In Internet Explorer 8, the Auto complete option is in a new tab.  Go to tools, Internet Options and then click the content tab.  You will see a section that says "Auto-Complete".  Click on the 'Settings' button and it gives you several choices of auto complete options.

  This should solve your problem.  Let us know if you need more information.
  Thank you, Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• my life chat lx-3000 does not work with Windows 7 help plz__

  my life chat lx-3000 does not work with window 7 help please

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• HP Pavilion dv4 1133tx, audio does not

  Hello friends, my name is nihang I just got a computer notebook hp Pavilion dv4 1133tx http://h10010.www1.hp.com/wwpc/in/en/ho/WF06b/321957-321957-3329744-64354-64354-3747826-3814427.html... I downgraded to xp service pak 3 I installed all the drivers, but audio does not work iv done much RND has TRIED to INSTALL MS UAA THEN IDT PILOT BUT IT KEEPS ON GIVING ERROR when I install the idt pilot he says '-output error» ': error-device object does not exist.

  There is 3 ms UAA on the net, I installed all then them tried to INSTALL IDT also it gives the error, and then I serched the forum, I got a response

  "XP 32 bit is difficult for drivers who work on these laptops_64bit is almost impossible."

  You do not Realtek Audio... and there is no driver XP for IDT Audio.Some have used the Vista driver successfully.

  Ms. UAA(required with a reboot before IDT):

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & swItem = PSG_I2...

  IDT High-Definition Audio:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & swItem = ob-624...

  I tried this too, and then also the same friends mistake plsss help what I do...

  I CANT SEE ANY AUDIO DEVICE IN MY DEVICE EAT MORE THERE ARE 6 EXLAMTION MARK YELLOW ONE BUT IT SAYS DOECENT WICH MATERIAL IS: s REALLY FED UP LOLLLLLLL

  MY USB, CHIPSET, TV TUNER, BLUETOOTH, WIRLESSLAN, LAN etc ALL ON MY DEVICE MANAGER, I CAN SEE his works well... .pls help thank you very much for reading

  by the grace of God, I got my answer my audio and modem works fine pls refer to this thread > > > http://h30434.www3.hp.com/psg/board/message?board.id=OS & thread.id = 230 thank you how tried to help me God bless u.this forum is awesome

• HP Pavilion dv6 - IDT audio does not?

  Hello

  My audio is not working, although it does not appear in my menu of sounds. I tried the update of drivers, but also restore. It worked a few days until an updated driver recently.

  Help would be much appreciated!

  Hey there,

  I have myself fixed yesterday evening but failed to connect in the forums for some reason any update my thread. I essentially disabled Windows update to automatically install to search for updates (and then asks me to install), then restored pilots, as when I tried to roll right is way back before as soon as I push / use restore system, the update of Windows after and bring back the most recent driver.

  Thanks for the help though, I searched through some other threads from people with similar problems who were very helpful as well.

• Effects of Dolby Advanced Audio does not work on Windows 8.1

  Hello

  I've upgraded my HP Pavilion G6 2242sf to Windows 8.1 and the sound quality is not as good as in Windows 8: Control Panel in the equalizer Dolby works but switch the Dolby Advanced Audio check box has no effect, so there is no more virtualization surround and 3 effects 'Movie', 'Music', and 'The voice' don't work anymore.

  Now my computer laptop speakers sounds choppy... Could you help me solve this problem?

  OK I tried a lot of IDT Audio Driver version and I found one that works correctly with Windows 8.1: the 6.10.6482 version. Here are the questions I lived on other versions of this driver:

  6.10.6425 to 6.10.6466 : Dolby effects working correctly, by speakers is good, but in the headphones sound is not "strengthen". Equalizer does not work.

  6.10.6491 and more : Equalizer works but other effects dolby (Surround virtualization, Volume Leveler, etc.) does not work and the sound from the speakers of the laptop is low (even at 100%).

  If you have Dolby Advanced Audio V2, 8.1 Windows on your PC and you meet one of these questions, the 6.10.6482 driver is the best for you, because all the features (virtualization Surround, Volume Leveler, equalizer, etc.) works.

  To download: click here and follow the instructions on the screen.

  HP so please update drivers download pages... Ex: 2242sf drivers page, it is only the IDT 6.10.6425 driver for Windows 8.1 while the 6.10.6482 is available on other sites.

• Pavilion p6744y: HP Pavilion p6744y DVD-ROM does not not after installing Windows 10.

  I have recently installed Windows 10 on my Pavilion p6744y. Since installation, the DVD-ROM does not work correctly. This worked perfectly before the upgrade of the OS and is the original drive installed by the manufacturer.

  Spin discs and the light flashes, but there is no response from the computer. DVD - ROM does not appear in Device Manager and has been confirmed as "ENABLED" in the BIOS Setup screen. All wires and cables are attached and tight.

  The HP Support Assistant is installed and confirms that all the drivers and software are up-to-date, like Windows Update.

  Microsoft contacted for support and remote access to the PC. They have attempted to install an updated driver, but have been unable to find newer and easier to apply than the drivers already installed drivers. They were unable to solve the problem and advised me to contact HP. Contact HP is not useful because the PC is out of warranty and they expect me to pay for the support.

  Help, please. I suspect all that I need is a updated driver to make the DVD - ROM communicable with 10 visible Windows.

  I know a little about this stuff, but I'm certainly not a computer "guru". Please keep the simple resposnes with easy to understand by a layman terms.

  Thanks for your help!

  I FOUND A SOLUTION!

  Research in the blogs of support paid off in a big way. A minor registry editing is all it took, and my player works like new!

  Here is the solution. My system is Windows 64-bit 10.

  Resolution 5: Create a registry subkey
  Note to use this method, you must be logged on to Windows as an administrator. If you need help, check that you are an administrator, go tohttp://support.microsoft.com/gp/admin
  Important follow the steps described in this section carefully. Serious problems can occur if you modify the registry incorrectly. Before you edit, back up the registry to restore in case of problems.
  To create the registry subkey, follow these steps:
  Press the Windows logo key + R to open the run. (or right click on the windows down icon to the left)
  Type regedit in the run box, and then press ENTER. If you are prompted for an administrator password or a confirmation, type the password, or click on allow
  In the navigation pane, locate the following registry subkey:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\atapi
  Right-click atapi, point to new, and then click key.
  Type Controller0 and press ENTER.
  Right-click Controller0, point to new, and then click DWORD(32-bit) value.
  Type EnumDevice1 and press ENTER.
  Right-click EnumDevice1, click on change...
  Type 1 in the value data box, and then click OK.
  Exit Registry Editor.

• H9-1150 Pavilion: H9-1150 PC does not start with WIndows 7 Home Premium 64-bit with ASUS 960 GTX card.

  I've seen others have posted simular questions, but I thought id repost this even in the case where there is more help.  I have the Elite Phönix Pavalion h9-1150 desktop with Windows 7 Home premium 64-bit.  and the bios HP 7.07 (seems no possible to upgrade the bios).

  As others have had I install the new graphics card, the 960 Asus GTX card that came out last month and the system start gives about 3 beeps in about 30 seconds and then it goes to a screen that is black with a blinking cursor and nothing else happens. cannot enter bios or settings for HP...

  I tried to disable UEFI boot devices in bios settings and enable only the legacy devices (after him swinging back on my original card, then move on to the new card), but it still gives 3 beeps after the start.   However, I was able to get into windows. Although I think that this may be due to turn off the computer with the old card in without power first. and after 3 beeps (which always blocks you on the bios menu) sometimes it appears the window where you can select the safe mode or normal mode... as sometimes happens if you start your computer with windows 7 If you had just it off without turning off power or something.  There, I can get into windows and run the PC and graphics card without problem, it's just when I try to start the problem happens.

  and suppor HP no. is NOT a fault of the card itself. As much before. I bought an EVGA card earlier a GTX 780 and SAME problem happened (although I have not tried to remove it then devices boot UEFI)...

  There is a problem of spacific with HP computers that seem to lock 'new' start-up equipment.

  Honestly not be blunted. I really think it's bad what I read somewhere that even if HP would never say it they do it on purpose to prevent people ruin of guarantee or any "liabity' that occur by people any other hardware on HP computers inventory installation

  makes no since to me.  the PC SHOULD be able to run the card. in fact his race he now once I was able to circumvent the blocking (temporarily) check markers, everyhting is fine tracks of card 3 times faster then old (that should be the case).

  But it's just this block as HP for some reason any installed on their bios/cards mothers is the question.

  Good news is I got it from amazon and I have about a month, until I return. which I think this time I'll make.  to see if something pops up in a month or something.

  It's the ONLY solution, it seems that HP has officially to deactivate start secure Windows 8

  but this isn't a computer of windows 8. and I guess even if install windows 8. the issue wouldn't disappear because given that its an older bios, there is no way to have a secure boot option to delete?

  HP you really need to get on the ball and give us a straight answer on this subject.  Is it ALL WAY to solve this problem? Can you not just do an older BIOS update to allow this? Or do you simply not want to worry about old PCs?

  anyway I think that it is wrong and very frustrating and to be honest. If this is the case when my pc otherwise MUST run on demand

  It's a PCI express 16 x slot card that is 3.0

  Here are the specifications of deetailed according to the guidelines of your page

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c03273835

  the card SHOULD WORK fine.  I thought the GTX 780 was a little too much for the PC as he had more then a six pin port and needed a little more power, so at first I thought it was the question. so I returned it. and has now got this new card.

  However, the ASUS GTX 960 map requires the SAME power that the card GTX 550 it by default and the SAME SIX connector

  so it SHOULD work.

  and performance tests indicate that it FACT it's just stupid... bios that asks the question.

  I'm afraid to turn off the computer at the moment and try again to see if windows starts normally after you turn off the startup UEPI devvices because he cannot start properly...

  HP you are one of the largest suppliers of computers you know technology what are YOUR computers.  WHY cant you give us a direct awnser on this.

  ITS VERY frustrating

  and to be honest if I can't solve this problem, I am very hestient never buy another product HP if their spacifically computers have this new method of hardware locking.

  because I have the card now works on my pc, it runs great! 3 times as fast as it should! and yet, I know in the back of my mind, if I can't understand this bad likely issue just to send it back... less I have time.

  and for now, I did not have money to buy a new pc. This PC is JUST perfect for what I need for now another card then you want a little better...

  He shoudnt be as much hassle there?

  Thank you.

  Hello

  You need update the BIOS that is listed under Windows 8 to support the new graphics.   You must upgrade to Windows 8 or temporarily install Windows 8, you can install the update to the BIOS.  While there may be other ways to install the BIOS update, clearly having Windows 8 running will be the safest way.  8 BIOS version is your best chance to get the latest graphics cards to work.

  You can Windows 8 Enterprise 90 days trial.

  If you decide to install W8, then create external recovery HP Media and backup your data before doing anything.

  The reality is that there is no guarantee that any particular graphics card will work in any particular PC, even if the graphics card works in other PC or even the same or similar model PCs. Know what the return policy is before you buy.

• WiFi HP Pavilion g6 2304TX button does not turn off (WINDOWS 8.1)

  after update to 8.1 windows WiFi button does not turn off even if the plane and pilot mode works well becomes but led still shines in white if it is off or on (WINDOWS 8.1)

  Uninstall the bluetooth driver. The problem is due to the old version of the bluetooth driver.
  If you use the Ralink Bluetooth driver. then download the latest driver from

  http://download-software-notebook.blogspot.in/2013/10/RALink-IVT-Bluetooth-stack-drivers.html

  Hope the problem is solved

• Audio does not work in Windows 7 media center TV until I have change the channel!

  I have windows 7 ultimate with an analogue of PCTV PCI TV card 110. Whenever I start live TV in Windows media Center, there is no Audio data. But after changing the channel, the audio begins to work!

  Not a problem if used to watch TV. But the records get recorded without sound.

  Hello helloyul,

  Have you tried the utilities listed here?
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-problems-in-Windows-Media-Center

  Let us know if it helps.

  Marilyn

• sounds works does not after installing SP2

  Help, after that I installed SP2 in my laptop Windows Vista, my sound has stopped working. I checked my sound system and update of my audio devices, but they are all perfectly fine. I cheked articles related to SP2 problems online, but they were not useful. I can't even uninstall SP2 because it does not! Also, I even tried unistalling all the updates I've installed SP2 and restarted my laptop for 5 hours, but nothing has WORKED. Help, please.

  Go to your laptop manufacturers website and download the drivers on their part.   Next time find a VISTA forum and not the Windows Home Server Ant.

  --

• Satellite L450D respond does not after installing the camera software

  Hello

  I bought this month a return of the United Kingdom L450D. Yesterday I tried to install the Olympus digital camera software, but once installed would not work. Olympus site application is compatible with Windows 7, but I decided to uninstall the software. I wonder if I uninstalled something I shouldn't, because does not now.

  I have a message - Windows Explorer has stopped working with 2 options: find a solution online and restart the program or restart the program

  Problem is cursor will respond not with the touchpad. A couple of times without reply, tried FN + F9. Mouse connected, cursor moves but will not meet the comand

  Any ideas?

  Hello

  This means that camera Olympus software is causing this problem?

  Hmm you have tried to uninstall the software in safe mode? Go to the advanced boot menu (F8), select Safe mode. Then try to uninstall the usual Olympus software.

  In addition, you can try uninstalling with special tools like CCleaner. I use it often as it cleans the registry and others.
  Check it!

• Softex Omnipass software of fingerprint recognition works does not after installing Internet Explorer 9.

  Original title: recognition of fingerprints and IE9.

  I recently "upgraded" to IE9 and now my Softex Omnipass of fingerprint recognition software does not work.

  Hello

  Internet Explorer 9 is a BETA product and therefore may not work with all your software perceive.
  I recommend to uninstall IE9, and then check to see if you Softex Omnipass program works.

  If this isn't the case, uninstall the Softex and then reinstall.

  I hope this helps.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Optical drive does not not after installing Windows 8

  I have the problem that my optical drive (CD/DVD) does not work. Have a new Toshiba computer with Windows 8 installed and can not read my optical drive.  Get the message "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) "This has worked perfectly before installing Windows 8.".

  Please, this is unacceptable. I want to uninstall Windows 8. This is a social platform and not a job or a desktop platform. This is unacceptable. Please tell us how to uninstall Windows 8.

  Done that and still does not work.

  Other solutions?