HP Pavilion Dv202130ea does not completely silent sound

Similar Questions

• HP Pavilion 14 laptop: HP Pavilion 14 does not completely close

  Hello

  Recently, I follow several updates driver on my laptop as suggested by HP Support Assistant. I believe that most, if not all, these updates have been Intel. Since then, my computer was not stopping completely.

  No matter if I push the power button / stop or klick on farm on the menu, my laptop to initialize the process of closing and I get the blue screen that says "Shutting down...". "but when the screen goes black, my power button light remains on and I can hear the cooling of laptop. Basically, I have to hold the power button for a long time if I want to completely stop my laptop (and to reactivate it later).

  Does anyone have the same problem or know a solution? I suspect, it might have to do with the new drivers, but I don't know how to solve this problem (or even how to know that the drivers have been updated lately..).

  Help would be much appreciated!

  Thank you!

  Hello

  Try the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close the open windows and restart the laptop.

  When windows has reloaded, download the driver directly from Intel IMEI on the following link, unzip the and run the installer.

  https://Downloadcenter.Intel.com/download/26127/Intel-management-engine-consumer-driver-for-Intel-NUC

  Once the installation is complete, restart the laptop.

  When the machine rebooted, re - activate the quick start and restart the computer once more - let Windows take over completely for a few minutes before checking.

  Kind regards

  DP - K

• Recovery CD does not completely load.

  I just replaced the hard drive and the recovery CD does not completely load. After having ejected the second CD, the file loading process stops at 12%. There is no error message and I welcomed as much as 5 hours for the load file to complete, but it remains at 12% after the first 30 minutes. HP Pavilion dv7-4165dx, Windows 7

  Well - here I answer to my own problem in case someone else has the same problem.  The second disk files recovery finally finished loading after 20 hours of waiting!  I spoke to two different technicians to support HP on the phone and neither one of them told me that it could take a long time to load the files!  One of them had me arrested and again after about 40 minutes of waiting.  I found it totally by accident after having frustrated and leaving it just stay there all night. Amazing!  The rest of the restore procedure went well after that - I think.  I'm always load all other software, files and updates, 2 days later.  The hard drive on this dog only lasted a year.

• When playing a certain game in facebook, the box that opens with friends, the names does not completely open, cannot click on send down

  When I play fish world in FB and want to send gifts, the drop-down list with the names of my friends does not completely open, so I see not the SEND button at the bottom. It works fine if I use Chrome, but I have the latest version of Firefox and it does not work.

  Here is a picture of what looks like the box. Not able to scroll down.

• Portege M750 - Volume knob does not control the sound

  Hello:

  Just made a new intall of Windows 7 (32 bit). Made from scracth with CD from Toshiba. The drivers that I downloaded from the site Web of Toshiba. Everything is ok, except the volume knob does not control the sound.

  Does anyone know driver I'm missing? All buttons and other functions are active except volume wheel.

  Hello

  Have you installed the VAP (value added package) for Win 7?
  EU from Toshiba are page pilot VAP v 1.2.40

• I bought the new ipad and I run the install. I put passcod and it is locked. not affecting does not complete

  I bought the new iPad and I run the install. I put the code to access and it is locked. not affecting does not complete

  What should I do

  What do you mean it's locked? You have forgotten the password? If this is what happened, you have to connect to iTunes and restore it using the recovery mode.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• I've updated my macbookpro (2010) snow leopard at elcapitan but when I restart it does not complete the installation then is no longer able to use it. Help?

  I've updated my macbookpro (2010) snow leopard at elcapitan but when I restart it does not complete the installation then is no longer able to use it.

  I tried the following:

  1 start with the R command and using disk utility that did say he had problems but then appear all ok after completing.

  2 tried the Verbose mode and did not work

  3. I tried command mode S did not.

  4. tried to zap the pram was not working.

  5 a couple other things that I had read, but nothing helped.

  It starts up and the line begins to show the computer made his 'thing', but gets stuck about 3/4 quarters of and goes no further. Would appreciate any suggestions.

  PS: also tried boot from the original disks as well, but no luck.

  You said "PS: also starting from the original disks tried both but no luck."

  Exactly what happened when you tried?

  Have you tried formatting the HD?

  Have you started the installation of SL?

• Windows Media Player does not play with sound .m2ts.

  WMP does not play with sound .m2ts.  used for, it is no more.  I tried the ms fix the thing did not help the cause.  What can I do to fix this?

  Hello

  1. which version of the Windows operating system is installed on your computer?

  2 have you made changes on the computer before this problem?

  3. what version of Windows Media Player do you use?

  4. are you able to play .m2ts files to other players?

  5. what exactly happens when you try to play the file?

  I suggest you try to install Codecs and see if it helps.

  Codecs: Frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  See the following article from Microsoft to check the version of Windows Media Player.

  http://support.Microsoft.com/kb/190990

  Hope the information is useful.

• Windows backup does not complete

  Same as above

  every other day I get a msg on my windows backup does not complete. What's wrong? I have inserted SEVERAL CD and it never seems to have solved! What should I do?

  Hello
  • What type of files are you trying to backup?
  • What version of the Windows operating system do you use?
  • You receive an error code?
   
  Do not include the libraries while safeguarding and then check what is happening.
   
  Here are some articles that you can consider moving by before starting the backup.
   
  Back up your files
  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files
   
  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions
   
  Back up your programs, files and system settings
  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-programs-system-settings-and-files
   
  Should what backup settings I use to maximize my disk space?
  http://Windows.Microsoft.com/en-us/Windows7/what-backup-settings-should-I-use-to-maximize-my-disk-space
   
   
  Post back with the State for additional troubleshooting steps.

• My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?

  My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?

  They are only updated office or all updates?

  For Office updates, usually to pick up the item at the: http://www.microsoft.com/downloads/en/default.aspx

  then manually download and install the same.

  If all updates, perhaps consider the following general tips-

  Option: File of Windows Update agent wups2.dll is incorrectly registered and the registry associated with the Wups2.dll file files are missing.

  Method 1: Save the Windows Update files

  1. Click Start and type notepad in the box start the search.
  2. click on Notepad in the list programs.
  3. copy the following commands, and then paste them into the opened Notepad window:
  REGSVR32 WUPS2. DLL/S
  REGSVR32 STINKS. DLL/S
  REGSVR32 WUAUENG. DLL/S
  REGSVR32 WUAPI. DLL/S
  REGSVR32 WUCLTUX. DLL/S
  REGSVR32 WUWEBV. DLL/S
  REGSVR32 JSCRIPT. DLL/S
  REGSVR32 MSXML3. DLL/S
  4. in Notepad, on the file menu, click Save as.
  5. in the file type list, click all files.
  6. in the file name box, type register.bat.
  7. save the Register.bat file to your desktop.
  8 right-click the Register.bat file, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password or click on continue.
  9. try to reinstall updates.

  http://support.Microsoft.com/kb/958053
  See: method 1: save the Windows Update files

  http://support.Microsoft.com/kb/326253
  Method 5: Registry Windows Update engine files

  http://support.Microsoft.com/kb/971058
  How to reset the Windows Update components?

  Method 2: Download and install Windows Update agent

  Windows Update Agent

  How to get the latest version of the Windows Update Agent to help manage updates on a computer
  http://support.Microsoft.com/kb/949104

  Information for network administrators about how to obtain the latest Windows Update Agent
  http://support.Microsoft.com/kb/946928

  Click Start, click run, click Browse, navigate to the file you saved and click Open.

  Add the switch /wuforce at the end of the command run and then click OK. For example, the command run might look like this: "C:\WindowsUpdateAgent30-x86.exe" /wuforce

  Click run.

  Follow the steps to complete the wizard.

  Important

  To reinstall Windows Update Agent - download the relevant file from one of the links provided above and save it to a drive where Vista is not loaded because the file cannot be launched directly from the root directory of the system.

  Click Start, run, type: "D:\WindowsUpdateAgent30-x86.exe /wuforce" (without the quotes) and press ENTER to install the Windows Update engine.

  Note: There is a space between "D:\WindowsUpdateAgent30-x86.exe" and "/ wuforce.

  D: is the drive where Windows is not installed (IE a flash drive or a 2nd hard drive etc.)

  TaurArian [MVP] 2005-2010 - Update Services

• Outlook Express 6.0 when I send an email, it seems that it does not completely turn off but it does and everytime I open OE, it turns off again and again and again, etc. Any ideas? Thank you

  I send an email, it does not completely turn off. A message that says that the task had not been completed, but no error message appears. The email goes off, and whenever I open OE it turns off again and again and again, etc. Any suggestions?

  Thank you

  You have the apparent corruption of dbx files, but an easy solution.

  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  General precautions for Outlook Express:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.

  Compact often as specified above.

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Cannot install SQL Server Express on Vista - installation does not complete

  SQL Server 2008 R2 - does not complete the installation

  ASK THE QUESTION IN THE SQL SERVER FORUM:
  http://social.msdn.Microsoft.com/forums/en/category/SQLServer

• Share of software Flip does not completely load due to not write the script of window installation package

  Part of Flip software does not completely load on windows vista... error message windows package install will not write script to complete the installation

  Hello hedubang,

  Thanks for posting on the Microsoft answers Forum.

  I suggest to try the safe mode and see if you can install it in safe mode or if there is a conflict.

  Start the program in safe mode

  1. reboot your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when you see the boot menu.

  2. when the Windows Advanced Options menu appears, select Safe Mode, and then press ENTER.

  3 log on to Windows by using the administrator account or any account of a user with administrator privileges.

  Note: In Safe Mode, your display system and the Bureau will look and perform differently than in Normal Mode. This is only temporary. To return the system to Normal mode, we can simply restart the computer.

  To determine if the problem that occurs with the program is caused by another program that is running in the background, we recommend that you restart the computer in safe mode and then test the program. If the program runs correctly in safe mode, but does not properly run in normal mode, it probably is another program that is conflicting with the program in question.

  To determine which program is causing a conflict with the program in question, we recommend that you perform a "clean boot" of the computer. A clean boot is designed to disable programs and services in the background as much as possible. This helps determine which service or program can be the cause of the problem.

  For more information about how to perform a clean boot for troubleshooting, click the number below to view the article in the Microsoft Knowledge Base:

  929135 (http://support.microsoft.com/kb/929135/) how to solve a problem by performing a clean boot in Windows Vista and Windows 7

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I have my button to right click on my mouse hp laptop pavilion 2008 does not work when I click on it might

  Can I get help with a problem please? my button to right click on my mouse hp laptop pavilion 2008 does not work when I click on it. I tried to delete some files, but it wouldn't let me not make a right click on it to remove

  could you please email me at * address email is removed from the privacy *.

  Thank you very much. I hope hear from you soon. Thank you once again :)

  Can I get help with a problem please? my button to right click on my mouse hp laptop pavilion 2008 does not work when I click on it. I tried to delete some files, but it wouldn't let me not make a right click on it to remove

  could you please email me at e-mail removed for privacy

  Thank you very much. I hope hear from you soon. Thank you once again :)

  You have a laptop. So try the right button on your touchpad. It work?
  If so, the only remaining possibilities are:
  1. bad mouse. Get a new one.
  2. defective UBS port. Plug the mouse into a different port. See if the right click of the mouse works this time.

  P.S. We do give advice to users via e-mail. All responses must be published and remained in this forum so that others with the same problem will use the answer.
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Pavilion dv9005us does not illuminate

  My Pavilion dv9005us does not light with or without the battery. I held the power to discharge remaining power, then plugged in the ac adapter shows blue light to the decision-making of the laptop, but none of the front lights light up. The motherboard is burned out? Any advice. I just got windows 7 to put on the laptop and unable to start. Bad luck!

  GDH777 wrote:

  Hello and thank you,

  but I had already done all the things that you suggested and your advice was right on point, but the laptop is a 2005 model and in its release cost a fortune, I guess we got our money wrth although I could buy 4 destops for the price of the HP Pavillion dv9005, just want to I could get it to start , with his age, he is not a value of the repair costs.

  But I so appreciated your answer... Viewied much my post but you were the only one to respond, sad for the HP forums. I went else where to get advice and got a lot of instant answers... If the laptop is still under warranty it would not have been a problem. I don't know that this model had a recal on this HP never does the model owners aware of the recall... What a pity so disappointed in HP. I bought a Lenovo y580 a year ago and I doubt that I'll never have problems with support.

  I hate to complain, but still Ty

  Remember, this is a users forum and questions are answered when you can be sure of the answer. I can say, on the one hand, if your system is an AMD-based system in the failures of graphic chipset Nvidia/AMD feared so your Board is most likely won't want to work more. Dv6000 and DV9000 HP have been candidate of choice for these chipset failures unless they have their video chipset fixed or replaced.