HP Pavilion dv3550el, how do I replace the RTC battery?

Similar Questions

• Portege M100 - how to replace the RTC battery?

  Hello, my Portege M100 RTC battery is flat. I managed to order one of the internet, but I can't locate. I disassemble almost every part of the computer, but if someone could just guide me and give the procedure to replace, that would be great. Thanks in advance!

  Hi friend

  It s easy to replace the RTC battery on your machine. I already did and I had no problem when replacing, I mean it's a bit difficult to find the batt. but I will give all that to my experience. ;)

  First look at the wireless lan card, West a slot under the slot lies the minipci wlan card. Near the wireless lan card slot is somewhat on the cover, this cover must be removed (quietly). The RTC battery is located in a white insulator, but before you peel this small battery, you must disconnect the battery from the motherboard. After unplugging it, simply lift the RTC and place a new.

  That's all, unfortunately I can't serve you with some photos, so you'll have to imagine yourself. ;)

  Good luck and welcome

  P.s.: If you feel uncomfortable by replacing the batt, then ask some tech to help you.

• Can't separate the top cover to the base/motherboard to replace the RTC battery on laptop ZD8080US

  I am trying to replace the RTC on a Pavillion ZD8080US battery.  I proceeded with disassembly in step 11, page 5-33 Maintenanceand Service of Guide.  I am now unable to separate the top cover from the rest of the laptop.

  I can get the left side of the image of the base but even with what appears to be excessive force that I can't get the right separate about 1/4 "without making me concerned that I'll break the cover.   (The right side of the cover is folded about 10 degrees when I'm trying to force it).  I tried some jiggling and a few twists to see if that would open invisible conflicts but with no luck.  I used the tree of a screwdriver between the parties to try to increase the force.  All to nothing does not.

  Coverage seems to be stuck/attached to a 4 "- 5" to the top on the right side.  It acts like a screw that has not been removed.  I don't see anything when I peer into the hole when the two parties are discarded.  Is there any adhesive which can be between the parties on the right side?

  I examined the process of dismantling four times.  I counted the screws that came out.  I revamped to all the screw holes in the drawings and made sure there is no screws in the holes.

  Am I missing something?  Is there a step or a comment has been omitted in the text?  Is there a screw hidden under the model or label of Windows?  Is there one thing that others have found to accomplish this separation?

  I appreciate any help I can get.

  Thanks in advance.

  http://h20574.www2.HP.com/results.htm?SID=434660&MEID=0CB6F826-C110-473D-A294-67807AF06D45

  Here's a direct link to the media library from HP _ make you and signed forwards click the link.

  Give it time to load and select "COVER" in the left column.

  Here is the link to the library as well.

  http://h20574.www2.HP.com/default.htm?lang=en&cc=us&hpappid=psml

  After watching the video, it looks like you missed a few screws. (certainly enough of them _ typical HP)  HP laptops must be 'broken' even if all the screws have been removed, but yours seems to just raise, so it seems that you missed a few screws.

• HP Pavilion m9500z-how do to replace the hard drive after upgrade Vista to 7

  My hard drive is currently allowed.  If I want to spend my hard drive or if I have a problem I have Windows 7 upgrade disk and the recovery of the computer disks is under Vista.  Is it complicated?  I need to install the old Vista and then upgrade to Windows 7 again?

  Hello

  You have another question?

• How to replace the RTC (CMOS) battery satellite A50 432

  Hi all!

  I have a SA50-432: what model of Satellite's my cell phone?

  I need to replace the RTC battery (cmos).
  Should I open my laptop? Or what parts?

  Thank you!
  ALE.

  Hey Buddy

  To replace the CMOS battery, you will need to disassemble the whole laptop.
  You want to risk that?

  I mean the whole notebook must be dismantled in the right direction and you use the right tools and the right order
  It's not easy and I would say that that's impossible without additional manuals and hardware experience

  I recommend contacting a mobile technician, that it would be the best way because this disassembly is really complicated and there is a high risk that damage you other expensive parts like motherboard or display

  PS; Why do you want to repalce the CMOS battery? Have you tried to recharge it again?

• How can we replace the display of a keon?

  I am a representative of the Mozilla's Rwanda.

  I gave one of the 3 keons, I got from Remo to a member of my community to work on applications, and the screen is broken on his watch. How can I replace the screen?

  AZ charadi
  Mozilla Rwanda Rep
  https://mozillians.org/en-US/u/AZ/ | https://reps.Mozilla.org/u/AZ/

  AzAnitah said

  I am a representative of the Mozilla's Rwanda.

  I gave one of the 3 keons, I got from Remo to a member of my community to work on applications, and the screen is broken on his watch. How can I replace the screen?

  AZ charadi
  Mozilla Rwanda Rep
  https://mozillians.org/en-US/u/AZ/ | https://reps.Mozilla.org/u/AZ/

  Hi Liz Az,.
  I think it will be better if consult you with the Center nearest mobile maintenance any hardware problem.

• How can I replace the Playlists tab on bottom of Apple's music with the Connect tab?

  How can I replace the Playlists tab on bottom of Apple's music with the Connect tab?

  Found my own answer online.  It's in the Restrictions under settings.

• How to replace the cmos battery in a HP nc6220

  I need to replace the cmos battery in a computer laptop nc6220.

  This is a simple job. Can someone explain how or provide a link explaining?

  Thank you to

  COMPUTIAC

  Thanks a lot for the info. New batt. will be here Friday.

  Will post back with the results.

• How can I replace the cooling on an Acer V5 fan?

  How can I replace the cooling on an Acer V5 fan?

  I sent you a private message

• I have 2 orange records for professionals but Windows XP cannot find the CD - how can I replace the CD? __

  I have 2 orange folders for Windows XP Professional, but it is impossible to find the CD - how can I replace the CD?

  I made myself, and it will cost about $23 (assuming, of course, that you have the product key)...

  How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals...
  
  http://support.Microsoft.com/default.aspx?kbid=326246

• How is it, replace the main Board marks invalid existing installation?

  How is it, replace the main Board marks invalid existing installation? I bought it and paid for it, it doesn't seem right that if I update my machine my operating system is no good!

  IF your computer comes with pre-installed windows it's called OEM and is related to the material.  If you change the mobo, it is indeed a new computer.

• How can I replace the old system of comments by Disqus?

  How can I replace the old system of Business Catalyst with Disqus comments? Help, please

  The universal integration for Disqus code is just javascript.  You must register for an account on http://disqus.com/for-websites/ and set up your account first.  Once you have changed your settings, click on the link 'Install' and which will give you code javascript to add to your pages as well as a few other tips to make it work.

• How can I replace the same clips with the same interval of time (same settings)?

  Dear Adobe Premiere CS5 Forum,

  I have the following problem, and I would look forward to receiving solutions:

  As I couldn't cut my video with clips in avi codecs (it is very difficult to cut in avi codecs, except that you have a very fast computer), I converted my raw clips in lower codecs. Then I cut my video in low quality codecs. My video is now ready to export.

  But before I want to export my video, I need to replace all the clips in avi codes so that my video is in good quality.

  Now the problem:

  How can I replace the clips (poor quality video codec codec avi), in order to have the same clips in a different codec always the same interval of time. I want the replaced clip immediately have the same interval of time.

  For example: a raw whole clip takes 2 minutes. But just a part / interval of the clip (from 01:00 minute 01:10 minutes) is shown in the video. Now I want to replace this clip with the same clip in avi codec. But it must be the same interval (from 01:00 minute 01:10 minutes).

  I tried to replace a clip. But they each have a different time interval (the lower quality clip is from 01:00 to 01:10 minutes and if I would like to replace the same clip in avi codec is the time interval between 0:00 to 0:10 minutes).

  How can I replace the clip with the same interval of time?

  Thanks in advance

  Leonardo

  Hold down the Alt + Shift; It is Shift that maintains the reference timecode. In addition, this will work only if your proxy clips contains timecode. If they all start to 00:00:00:00, this will not work for you.

• Pavilion dv6 2170 clock problem after replacing the CMOS battery

  Hello world. Sorry for my bad likely English

  OK, so the problem started since I changed my laptop CMOS battery. and to be honest it wasn't whit any problem the clock when I replaced it but I if this may be the cause of another problem that later I figuered what the problem was because of the RAM.

  in any case, I changed the Rams and this problem has been resolved. I just set the clock of the BIOS and rebooted the system. After awhile I figuered that windows clock is not fair. I restarted again and saw the BIOS clock. It has been reset for 2009! even when the laptop battery and power supply are attached the BIOS and windows continues to change clock! I even changed my windows and I replaced the CMOS battery with the former, but nothing helped. It seems really strange, but I don't think it's maybe a hardware problem there a driver or something for the CMOS battery... need your help! Thank you!

  You mentioned that the BIOS has been reset for 2009? This means that there is a problem with the current or any leak and the BIOS has been "reset" back at the root of the plant. I'm afraid you have shorted something when you changed the battery not be grounded.

  Worst case is that there is physical damage to your motherboard and there is nothing you can do about it, probably broken a capacitor - who cannot hold a charge to prevent the reset of the BIOS clock.

  However, you can try this.

  Completely, unplug your computer, remove the laptop battery, etc... Then browse 'Guide' your computer for the "hard physical reset" for your CMOS. I don't know what it's like on a laptop, I only did it on desktop with riders. Be sure to follow the directions precisely.

  -Make sure you are properly grounded. touch the metal parts that is grouned before touching anything on your computer.
  -the hard reset should be done for at least 30 seconds, this ensures that the power is completely served the system. Then you can set this back.

  Try this a couple of times, first without removing the CMOS battery and 2nd time after remove CMOS battery and placing it in.

  Good luck.

  BTW, you can also try running without your new memories (if there is more than 1 stick, try them separately). In fact, I would probably try first before doing a hard reset CMOS. The reason why I didn't say earlier, it's because I have assumed that you already tried this.

• Equium A210 - replacing the CMOS battery possible?

  My Toshiba Satellite A210 - 1 4 seems to have a CMOS battery problem because it does not keep the BIOS settings.

  I bought a replacement battery and a/c mains adapter to remove the a/c power problems but the POST beaps and CMOS keeps a checksum error and once in the BIOS and save the settings, it starts successfully, but if the laptop restarts or is off this all over again. I've also updated the BIOS successfully is not of the BIOS chip. The only thing I can think is to replace the CMOS battery - is it possible?

  I read that some are soldered on? Would this laptop Toshiba service to replace the CMOS battery / audit failures - if so, how much would it cost, or someone else can do that the laptop is out of warranty.

  Advice please?

  Hi Emases2010,

  As I know some batteries are fixed/soldered to the motherboard and t is no substitute, but I think that only a laptop computer technician can give you a detailed response.

  Normally, you can load the CMOS battery if you leave the AC adapter plugged in overnight or in the best case 24 hours. After this, the battery must be fully charged.
  Check this box!