HP Pavilion DV4-1275mx remote control driver

Similar Questions

• HP Pavilion DV4-1225dx remote control drivers

  I have a HP Pavilion DV4-1225dx, I bought at bestbuy and I am running windows 7 64 bit, I was wondering if there was drivers availible for remote control of my laptop, I would prefer not having to install the whole suite of HP, but I'd do it if it means I could make it work I used 64-bit drivers for vista for the rest of the machine and they all worked perfectly, but for remote control Setup crashes my whole upward machine when I try to start it, if anyone has any ideas?

  Try this driver.

• Pavilion DV6-1210sa remote control driver

  Does anyone know where I can find the driver Windows 7 (32 bit) the remote control for this laptop.

  Thank you

  Mark

  Thanks this works very well.

  Mark

• HP Pavilion DV4-1275mx not display and no hard disk power activity

  I have a laptop HP Pavilion DV4-1275mx and when I turn on the computer, the fan turns on for a few seconds, then turns off, then the caps lock and the locking witnesses Flash on and outside.  The HARD drive on the front light shows any activity, what is the problem?

  Hello
  Click on the link below:
  LED white screen error codes

• Toshiba DVD Player & remote control driver needed

  Hi all

  my camera is Qosmio X 300 - 13O, & I installed a clean W.7 64 bit format.
  I used the program to install drivers Toshiba for W.7 as I installed the package of value added.
  but none of them have these two thing I really wish she was back!

  Q: Does Toshiba Drivers Installer W.7 include; Value Added Package?

  Hello

  To be honest, I don't know what Toshiba Drivers Installer. Where you found it?
  Anyway, your Qosmio belongs to the PQX32E series and all Win7 tips you'll find on the download page of Toshiba under http://eu.computers.toshiba-europe.com

  As I see the reader DVD is offered as a update only. What you can try is to install the 64-bit version of Vista and see if it will work properly. After this try to install the update for Win7 64 bit.

  What about the remote control?
  New installation on Qosmio x 300 is quite complicated and more free stuff you can use after Win7 upgrade (Vista upgraded to Win7 using the Toshiba upgrade kit).

  I did a few months ago and all went well. With a clean install is a bit complicated and I had problems with several hardware components. Quite simply, was not able to install so I have dropped. You can try to install Vista stuff for all the missing components.

• Remote control driver

  Hello

  I have a dv5-1000us and after you have reinstalled windows, I lost a lot of pilots. The only one, I'm still missing is the driver for the remote is shipped with my laptop so I can control my laptop by far. I have Vista Ultimate (x 32).

  I posted this in another forum there, a week for a quick response would be appreciated.

  Thank you

  Para

  Remote pilot is ENE CIR, do you have it installed? here

• Satellite A200-1kh remote control driver for Windows 7

  Hi, I reinstall windows on my Toshiba satellite a200-kh and try to adjust the Control Panel, but could not find a driver or a program taking control remotely. Help me please!

  It comes to my IMG remote included
  http://www.nix.ru/Autocatalog/toshiba_notebook_rus/68500_rc_large.jpg

  Have you tried to install the Vista driver?

• HP Pavilion dv5-1166us remote control

  HI I discovered the control device remotely on my HP Pavilion dv5-1166us the other day, went bought a battery for it and can't find a way to make it work while I watch streaming Netflix movies on my TV with an HDMI cable, laptop to TV connection.  What Miss me?

  Thank you

  Hi @bevermont

  Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I see that you have trouble getting your remote to work with Netflix. These remotes are designed to work with Windows Media Player as you can see on this YouTube link, not Netflix. You will not be able to make it work for Netflix.

• Pavilion dv4 helps PCI controller driver

  Paul, can you get me a link to the driver for below?  Please...

  PCI\VEN_8086 & DEV_1E3A & SUBSYS_1836103C & REV_04
  PCI\VEN_8086 & DEV_1E3A & SUBSYS_1836103C
  PCI\VEN_8086 & DEV_1E3A & CC_078000
  PCI\VEN_8086 & DEV_1E3A & CC_0780

  Hello:

  I can't decode it. #  I need product number located on the sticker as well as the serial number.

  Try this one:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ob-98695-1

  If this does not work, try this one:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ob-82013-1

  And finally, if the above two do not work, try this one.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ob-106515-1

  Paul

• My pavilion dv3 that remote control does not work

  Windows 7 is installed

  Hello

  What Version of Windows 7?

  (32-bit or 64 - bit)

  64-bit is here

  32-bit here is the air in input devices (ENE CIR receiver driver)

  Best regards
  ERICO

• What software to use on Presario V3918 for XP remote control?

  Hello everybody, my problem is, I've downgraded successfully to XP my presario V3918. Everything works ok, but last week I received a remote from tx1330 Pavilion. This remote works on my machine, but its function is reduced, because I can use only a few buttons. For example, keys windows media center and DVD are useless on XP. Is it possible to do their job? The editable functions button or something?

  Also, I wanted to ask why my microphone does not work on XP, my audio device is detected as Conexant HD audio, but I can't activate the microphone in the volume control because the option is not available.

  Hope someone can help me with this, sorry for my English. Thank you.

  Hi Lil-k

  The remote control driver was built HP Quick Launch Buttons.

  I have had no experience with tx1330 remote control, but I can assure you that it works with remote dv2000, dv6000 and dv9000.

  .NET framework (before quick launch)

  here: http://tinyurl.com/758p8

  HP Quick Launch buttons

  here: ftp://ftp.hp.com/pub/softpaq/sp40001-40500/sp40139.exe

  Uninstall the current sound driver, install an updated driver the below:

  Conexant SmartAudio 221

  here: http://www.mediafire.com/?dg0cmmkm4y4

  Use it for audio. Unzip in a folder. Run the Setup program.

  If it errors use Device Manager.

  In Device Manager, right click "Audio Device on HD", choose Update driver, not to communicate.

  Install from a list or a specific location, select do not search.

  I will choose the driver to install,

  For the hardware Type select 'show all devices '.

  Remove control "Show compatible hardware" and click on 'disk '.

  Next... Navigate to the unzipped folder and choose the "WiSVHe5.inf".

  Ignore XP when it complains.

  Reset.

  I got V3700 series and it work very smooth with XP.

  Message edited by Mariza on 22/11/2008 20:25

• Cannot install driver for hp pavilion dv4-2045dx cd player

  Computer: HP Pavilion dv4 2045dx using Windows 7 (64-bit)

  I currently have problems with my computer's CD drive.  He has been unable to read discs of any kind of music, DVDS and software programs for several months now.  The main problem seems to be with an inability to properly install the driver for the cd drive.

  When running "find and solve the problems" of section "Troubleshooting" in the Control Panel, I get an error message that says that there is a problem with the driver for the cd drive.  Whenever I try to install the driver, he is not able to do so and contact the manufacturer of your computer.  I also tried to download all the updates and I get essentially the same message.

  Also, here's all that I've done so far.  I followed all these steps, but the last two listed in the help or support of the site.  Here is the link I used:

  http://support.HP.com/us-en/document/c01897812

  I couldn't do a restore of the system in step 7, because the last date that I could find to a restore point has been today (or yesterday).  In addition, I couldn't do step 8.

  Any help would be greatly appreciated.

  Thank you

  Hello:

  See if ongoing automated microsoft fix tool for you works.

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/

  If AutoCorrect does not work, try the manual fix in section "Let Me difficulty it myself, ' on the link below.

  Right to the title of this topic is a "click here to view the solution."

  http://support.Microsoft.com/kb/982116

• Change hard drive HP Pavilion dv4-1433sb

  I just got my HP Pavilion dv4-1433sb Small Business Edition Notebook - I bought with a 250 MB hard drive and you want to change a 500 MB or 750 MB drive befors I load all my programs and data.

  Help please with two questions:

  1. the computer comes with several factory-installed control programs, I want to keep - how can I get the transfgerred to the new hard disk?

  2. this hard drive work in my new system?   http://www.TigerDirect.com/applications/SearchTools/item-details.asp?EdpNo=4846364&CATID=1277

  I like Seagate and is only $129-

  Any suggestions will be appreciated.

  1. your recovery cd/DVDs, then you can start with them in order to reinstall the software factory:

  http://tinyurl.com/2y4rub

  Another option is software imaging, although it is always preferable to also have all of the recovery.

  Macrium Reflect disk imaging:

  http://www.Macrium.com/reflectfree.asp

  2. shoud hdd works, although we have seen some problems reported with 500 GB hard drive.

  Message edited by CherylG on 13/09/2009 20:48

• Cannot physically remove the hard drive from the Pavilion dv4-1430us

  The disk hard origianal in this Pavilion dv4-1430us makes mechanical noises, so I will try to replace it with a new one.  I checked the owner's manual supplied with the dv4-1430us, and it gives these instructions (here condensed): 1) remove the power cord and disconnect the battery, 2) remove the hd plastic cover, 3) remove three screws of hard drive now the hd casing in place and 4) pull hard hd tab to the left then go out.

  The problems are: A) there is no hard drive to draw labels, and B) after you remove the three screws, can't do the hd if I push on it to move to the right or remove it from the left.  I don't want to use tools like screwdriver large flat blade or bars of little Crow because it seems like that would probably break something.  Does anyone know how to remove the hard drive of this particular model without breaking something?

  HaggisCat,

  Thanks for a very detailed and quick response.  It turns out the indications that I read in the manual, your statements and mine were all in line to exert a force on the hard drive in the direction indicated by the red arrow on your image.  (A picture is worth a thousand words and your supplied photo clarity that my summary of instructional text has not.)  I decided to take a picture of the entire hard drive in my dv4-1430us (see below) to show that there is no close tab Mylar pull, as there is on the photo you condition.   (The same gray metal tab that appears in your photo, but no mylar tab).

  

  Apparently my dv4-1430us had some differences at its Assembly of HD compared to yours.  As you can see, the structural elements that surround the HD are very similar to those of your photo, but there is no narrow mylar like in your photo tag.  There is a dark mylar or similar film plastic on top of my HD, and there is a triangle of silver color at the bottom right of this film that points in the same direction as your red arrow.  I tried lifting up the end of this film, mylar and pulling that direction (to the right in this picture), but a part of it (in the upper right corner of this photo) began to tear.  As the film seems to only be glued on the top edge of the caddy HD (also called frame or cage in some articles), I doubted that the show was strong enough to eliminate the stress of a closed winching.  A comrade who has put a video on YouTube showing this procedure also indicated that he had torn this layer of film when he first attempted to remove the HD.  Because I assume that the dark film has a purpose (static protection?)  I gave up shooting at the right edge of the film.

  However the consistency of the instructions in the manual, the instructions on this YouTube video and instructions in your answer on the direction in which the Assembly needed to move HD gave me the courage to put a force pushing the HD in the direction of your red arrow.  To do this, I placed the tip of a flat blade screwdriver large (blade about 5/16 "wide) at the points indicated at the ends of the two yellow arrows in my picture.  In these positions, the blade of screwdriver pushed against the HD box and not the hard drive itself.  Each of these two places, I gave him some very closed but controlled scrimmages, and HD finally moved in the direction of your red arrow as it is supposed to.  I then lifted all of the HD and replaced the HD without incident.

  The action drag the new HD in place was much easier that it was removing the original HD for the first time.  It was perhaps because of some hard rubber padding that has been placed on each side of the original HD assembly that makes for a very tight fit.

  I hope that this description is useful for others who do not have used mylar tab in their computers laptops dv4 and those whose HD assemblies are very tight in.  Thanks again for your quick response that gave me enough comfort to move forward.

• Qosmio G40 - which driver can be used for remote control?

  Hello

  Which driver should I use for remote control?

  How to configure with the PC?

  Thank you very much.

  I assume that you need remote control manager.
  This tool is preinstalled on your Qosmio laptop?