HP Pavilion dv4-3126tx: upgrade to windows 10, display driver does not work

Similar Questions

• HP 500 b Micro Tower: after upgrade to windows 10 dvd player does not work

  Before the update windows 7 windows 10, I ran the windows 10 application to check all my gear.

  Windows 10 says that all my hardware is compatible with windows 10.

  After installing windpws 10 does not work my cd/dvd litescribe drive.

  There is power coming to my dvd player, because I can open & close the player.

  Device Manager does not detect my dvd drive.

  I've updated all my drivers through HP assistant & he said that all my drivers are up to date.

  My pc is a HP 500 b Micro Tower

  Product number: XT419EA #ACQ

  Can someone help me fimding good firmware for my dvd player.

  Hello:

  See that if steps listed from the link below resolution 5 solves the problem.

  https://support.Microsoft.com/en-us/KB/314060

• Upgrade to Windows 10 photoshoplightroom 5 does not work, windows tell me that it's incompatible.

  now running Windows 10. My Room 5 does not open.

  Hello

  > Lightroom open like an Administrator.Right click on Lightroom > select run as administrator.

  > Try Running in compatibility mode instead.we reported no problems of compatibility with Lightroom 5.

  Lightroom right click select Properties.Then go to compatibility and run in Windows 7 mode.

  

  ~ Assani

• Windows 10 - myDAQ driver does not work

  Hello, I just "upgraded" to Windows 10 and everything for myDAQ installed and Windows is not recognizing the driver. Has anyone else had this problem and found a solution?

  I installed the latest drivers for DAQmx (15.0.1) and Elvis (15.0) without a bit of luck. I have attached the NI MAX errors and Device Manager

  Thank you very much for your help!

  Hi jtkrenz,

  Unfortunately, Windows 10 is not yet supported by Elvismx and DAQmx.  This can be seen under the OS Support in their respective Readme file:

  1 NOR-DAQmx 15.0.1 Readme

  http://download.NI.com/support/softlib//multifunction_daq/nidaqmx/15.0.1/Readme.html

  2 NEITHER ELVISmx 15.0 Readme

  http://download.NI.com/support/softlib//multifunction_daq/nielvis/15.0/Readme.html

  Thank you!

• Tecra M5: Impossible to duplicate on two screens, with windows vista nvidia driver does not work

  I have installed windows vista 32-bit, the bios updated and all the drivers from the official Web site of toshiba, if I put a second screen resolution of my lcd screen to 1024 X 800, but in the external screen does not receive a signal.
  If I start the tecra with the connected external escreen account signal in this area, no signal on the lcd screen.

  Please help me think this laptop is for my boss
  Thank you

  Abel

  Post edited by: abelbass

  Hello

  AFAIK the Tecra M5 came with the graphics card Intel or nVidia.

  On laptops with nVidia graphics card, you can set a different option in nVidia Desktop Manager. for example allow several computers to office
  You should find it in the control panel.

  Unfortunately, I put t know exactly where the parameters are placed in the nVidia Manager because this notebook was shipped only with Windows XP but I'm sure that you will find.

  Good bye

• After the update of Windows CD/DVD drive does not work

  After windows automatically updated on my windows system 8, my CD/DVD drive no longer recognized discs. It will rotate when you close the disc drive as if he tried to recognize and initialize the disc, but then it will do nothing. When you go in my computer it doesn't even say that there is a hard drive available.

  In device manager has a yellow triangle with a '!' in the middle on the DVD/CD drive. When I click on drive properties and check the updates on the disk, it indicates that the drivers are up to date. Drive is MATSHITA DVD-RAM UJ8C0.
  Y at - it a fix for this problem? For some reason my system does not restore automatically save it before the update or the other so I can not on a point system. Help, please.

  Try to remove the GEARAspiWDM entry.

  To remove the GEARAspiWDM entry double-click UpperFilters and, under value data, delete GEARAspiWDM > OK

  Create a system restore point beforehand and restart the computer after.

  However, if you have an application that uses the GEARAspiWDM, like iTunes, just install the latest version of hardware drivers (4.020.5) and that no changes to the registry:

  http://www.GearSoftware.com/support/drivers.php

  Updated speed drivers should also correct the mistake.

• HP pavilion dv4 1135ee update the bios after that it does not work

  Dears
  I upgraded my Bios from hp.com to restart my laptop now its white screen see the it's not be will start my window. How can I get it please help me thank you

  I m new here

• Just upgraded to Windows 10, now Indesign does not open

  As the title suggests, just upgraded to Windows 10, now indesign does not open. It is interesting to other applications CC open, but no indesign. When I try to open from the finder, I get an error indicating that the file ddl virtual studio c ++ 110.dans is missing. I tried all the normal things to make it unmissing, but they do not seem to work.

  If I try to open indesign CC, nothing happens. No error, nothing, I'm just pressing an empty button.

  Thank you.

  Hello, I had actually already tried using the tool unistaller. All uninstalled, then reinstalled, which did NOT work.

  I was upgrade to Windows 8.1 for windows 10.

  I managed to get InDesign to work as follows:

  1. Everything uninstalled uninstaller of windows (and not via CC).
  2. At running the Adobe uninstaller tool (it has not found anything however).
  3. After I installed CC, I noticed that CC has reinstalled the package to redistribute C++ 2008 I've heard causes problems.
  4. I uninstalled then manually C++ 2008 package, but left 2012 and 2015.
  5. Then I installed InDesign. When I installed indesign it installed a few other packages C++, but... Responsible inDesign! Still a bug or 3 but it works at least.

  It worked for me.

• discs made with WIndows XP, but none does not work with Windows Vista

  I have many discs made with windows XP and now none will work with windows VISTA, does anyone have an idea, I tried for weeks now, alll over the internet, but nothing, can someone help, because I need these files on CD RE-WRITER and RE-ENGRAVER of DVD discs.

  Hello

  ·         You get the error message?

  Follow these methods and check if that helps:

  Method 1:

  I suggest you run the Microsoft Fixit tool from this link and if it helps.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems

  Method 2:

  Follow the steps in troubleshooting this article and check if that helps:

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista

  http://support.Microsoft.com/kb/929461

• Pavilion dv7t-2000 dvd/CD drive does not work

  Hello

  I have problems with my CD/DVD drive.

  Recently, I upgrade my Windows Vista Service Pack 2. I noticed that my CD/DVD drive does not work, although I don't know if this is related to the Vista upgrade because I have not used the cd player in a long time. The drive does not read CDs or DVDs that I put in.

  Device Manager indicates there is a problem with the driver for CD-ROM/DVD-ROM drive. Device Manager displays the following error message: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  The device is listed as TSSTcorp CDDVDW TS-L633M ATA Device. The CD-ROM/DVD-ROM is the same as that provided with the laptop when I bought it, which is listed as "LightScribeSuperMulti8XDVD + / RWw/DLayer" on my receipt.

  In the properties of the device, I pressed the 'Update Driver' button, but it says that the driver is already up to date.

  I searched HP's site for an updated CD-ROM/DVD-ROM driver, but I couldn't find one. I also ran "HP Health Check", but the program cannot find any problems.

  Thank you for your help.

  The problem has been resolved.

  I followed the advice of nazcar4u in a similar thread:

  http://h30434.www3.HP.com/PSG/board/message?board.ID=hardware&thread.ID=16365

  I used the "Fix it" Wizard on the Microsoft Web site:

  http://support.Microsoft.com/kb/314060

  I hope it helps those who encounter the same problem.

• My DVD/CD drive does not work in Windows 8 Professional, and it ISN'T a hardware problem.

  My DVD/CD drive does not work in Windows 8 Professional with or without data or audio in it. However, if I turn off the PC with a bootable CD/DVD in there, the PC recognize the media and initiate the CD when turned on. This confirms that the DVD/CD drive actually works, but for some stupid reason, Microsoft Windows 8 Professional will not recognize the same DVD/CD player it loaded since! Thanks again Microsoft for another product of shit. Now, how are you going to fix this? And how are we supposed to run things such as WordPad or paint, etc. I predict that Windows 8 will fall faster than Windows Me!

  Hello

  To access all applications - just right-click anywhere on the splash screen - the lower right corner
  -All Apps - scroll to the left to learn more. You can pin any application to the start screen - right
  Click on - to start pine.

  It is a real help:

  Windows Store - Top free - Windows 8 Cheat Keys

  While on the screen type start - Help

  Or Win Key Q plus Apps search - help

  Or charms - Search - Apps - Help Menu

  After that the foregoing-> on left click-> Help and Support.

  ==================================

  Solution Windows 8 - left Center - learn more
  http://support.Microsoft.com/GP/Windows-8

  Meet Windows - a good start
  http://Windows.Microsoft.com/en-us/Windows-8/meet

  ====================================================
  ====================================================

  It was an upgrade of Windows 8 or you you destroy the old operating system and
  do a full install? Are there any error messages?
  
  Check the Compatibility Center to see if the drive is compatible:

  Windows Compatibility Center
  http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/home?language=en-us

  Check with the manufacturer of the system support, their documentation online and pilot/firmaware,
  and ask questions in the forums (if any) on known problems. Some CD/DVD players are not
  Windows compatible 8.

  ---------------

  From the desktop - WINDOWS key + D while on the screen start to access the desktop:

  WINDOWS key + X or build the mouse in the lower left corner right click and corner - command prompt (ADMIN)

  Enter it below (or COPY and PASTE):

  Reg.exe add "HKLM\System\CurrentControlSet\Services\atapi\Controller0" / f/v EnumDevice1 /t REG_DWORD /d 0x00000001

  RESET
  (from AtishayMSFT)

  -------------------------------------------------------------------------------------

  -Use and you need to use it again after trying the methods below.

  What happens if a device is not installed correctly? (Run the hardware and devices Troubleshooter)
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  ================================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Starting from the command prompt from the desktop - Windows key + X - (Admin)

  SFC/scannow
  (space between C and /)

  Then run CheckDisk execution - chkdsk /r (the / r includes the parameter f controls)

  Windows key + X - command prompt (Admin)

  Chkdsk /r
  (space between the k and /)

  Or run CheckDisk in Windows 8:

  Improve performance by optimizing your hard drive - see "to repair a drive.
  http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive

  --------------------------------

  Windows key + X - Control Panel

  Try this - Panel - Device Manager - CD/DVD - double-click the device - driver
  Tab: click on update drivers (this will probably do nothing) - then do a CLICK RIGHT to the road.
  UNINSTALL - REBOOT this will refresh the default driver stack

  ====================================================

  If necessary:

  Try to do a "Refresh your PC without affecting your files" (or modification of your personal data
  settings) or even a restore.

  Windows 8 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  =====================================

  Expert help with CD/DVD drive issues available here:

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://Club.myce.com/F61/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• AMD driver does not work on my hp pavilion g6

  Hi all, I just bought my HP pavilion g6 now with the HD of Intel and Amd Radeon 7670 M, I tried to play a video, but the quality was very poor. So I think that the Amd driver does not work.

  Can someone tell me what to do to make it work? I would really appreciate.

  Ah... I thought that the graphics card will also increase the quality of the video...

  My os is windows 8 unique language, and the product number is C5T77EA #BH5.

  Thanks anyway.

• Satellite L650-1MT - WLan driver for Windows 7 x 64 does not work

  Hallo forum-Member Support,

  I reinstalled my windows, because my old hard drive has been damaged. Now I have Windows 7 x 64.
  By installing the hardware drivers for the Toshiba homepage, I had a problem with the W - Lan driver.
  It has a WiFi Atheros adapter, but the driver does not work. After extracting the window closes and the installation starting.

  What can I do?

  + The message was edited: subject has been changed.

  Hello

  Thanks for posting this message here in the forum, but I think that no one would be able to provide more help without knowing the number of laptop model.
  What cell phone do you have exactly?
  Are you sure that the laptop supports the Atheros Wlan card?

• Driver Ethernet for Windows XP Home edition does not work on Satellite A100

  Satellite A100-784 PSAANE-02L011G3 ethernet driver for Windows XP Home Edition does not work. Cannot successfully install driver, downloaded all the drivers and still does not.

  As a sign of Device Manager yellow. I bought my laptop with Vista BASIC and I put XP - SP2. Country is Croatia! Help me please!

  Hello

  I can't believe that you are not able to install the LAN on this Satellite A100 driver!

  However, the satellite A100-784 supports a chip 82562GZ Intel 10/100 Mbit (Ekron) of Lan.

  If you want you can download and install page Intel network driver:

  http://Downloadcenter.Intel.com/Product_Filter.aspx?ProductID=999&lang=eng

  You will find the drivers Intel 8256 x Ethernet controllers

  Good bye

• reinstalled my windows but forward button does not work

  reinstalled my windows but forward button does not work or hibernation modded shows in power options

  Hello Rahul,

  Thanks for choosing Microsoft Community!

  You have reached the right forum. Let us work as a team and try to solve this problem.

  If I understand correctly, you have problems with node in sleep and extended in Windows XP.

  Please read the following article and see if that helps:

  How to solve the problems of hibernation and standby in Windows XP:

  http://support.Microsoft.com/kb/907477

  Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.