HP Pavilion dv6 - 6130sr: maximum frequency of RAM on HP Pavilion dv6 - 6130sr?

Similar Questions

• Maximum frequency of RAM to Satellite C650-1CC

  Hello

  I want to buy RAMs again, but I know Don t, how is the maximum frequency, which can use my cell phone. If he isn´t no need to buy a RAM with frequency with 1600 MHz for example.
  Now there's the Rams with 1066 MHz frequency.

  Thanks for the reply

  Satellite C650-1CC (PSC08E-03H006CZ)

  According to specification for laptop, your laptop can be upgraded up to 4 GB. For the moment, there must be 3 GB inside and one of the modules is 2 GB. Only thing you can do is to get the same second RAM and use 2 x 2 GB. It must be DDR3 1066 MHz (PC3-8500).

  You must use the identical two Rams and you will have only a few compatibility problems.

• HP Pavilion Notebook 15-p003ne: what is the maximum amount of ram I can switch to my laptop?

  I want to upgrade ram to my laptop (Pavilion 15-p003ne), which is the maximum amount of ram I can go with!

  Hello

  The upgrade of RAM MAXIMUM on your laptop is 12 GB

  Supports the following configurations:

  ● 12288 MB (8192 MB × 1 + 4096 MB × 1; not supported on models of computer with a 32-bit operating system)

  ● 8192 MB (8192 MB × 1 or 4096 MB × 2; not supported on models of computer with the 32-bit operating system)

  ● 6144 MB (4096 MB × 1 + 2048 MB × 1; not supported on the computer models equipped 32-bit operating system)

  ● 4096 MB (4096 MB × 1 or 2048 MB × 2)

  ● 16384 MB (8192 MB x 2)

  Two slots for memory (some models only) SODIMM module

  DDR3L-1600 MHz dual channel support DDR3L - 1333 MHz dual channel Max.

  DDR3L - 1600 MHz single channel Support

  See page # 3 of Chapter 1 of the link for more information below

  http://h10032.www1.HP.com/CTG/manual/c04402649

• HP Pavillion DV6-2158nr: my HP Pavillion DV6-2158nr maximum amount of ram

  Hi I have a HP Pavillion DV6-2158nr, and it has only 4 GB of ram. I am wanting to move to 16 GB of ram. My question is it possible will it take the amount if yes great!  If this is not the case, what is the maximum amount of ram it can handle.

  Thank you for your help

  Hello

  According to the technique following page

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c02029489

  Laptop you supports up to 8 GB of memory.

• Pavilion 15-b162sr Sleekbook: Maximum amount of RAM to my laptop. Please help me.

  Hello.
  
  I have two questions. I want to improve my laptop.
  
  1. I put in my laptop RAM-DDR3-1600 (800 MHz)?
  
  2 and how I can put in my laptop?
  
  I read the manual here on the site, but I couldn't find out the maximum amount of RAM. If its why I write this here. Please help me. Its very important for me.
  
  Best regards, Stas.

  Model #: E3D25EA
  
  Serial No.: [personal information]

  You have a single 4 GB module and it will take up to 2 x 8 modules for a total of 16 concerts concert. This is the reference number:

  Memory modules (two, DDR3 - 1600 MHz PC3-12800): ● 8 GB 693374-005

  Here is the Manual:

  Manual

  'How to' on memory is the p. 69. Add more memory will jeopardize the warranty and will require the removal of the motherboard, which is not easy.

  It's memory:

  https://www.Amazon.com/Kingston-Technology-1600MHz-PC3-12800-KVR16LS11/DP/B00CQ35HBQ/ref=sr_1_1?ie=UTF8 & qid = 1466602307 & SR = 8-1 & Keywords = 693374-005

  It's low-voltage DDR3L-1600 1.35 volts and it should be low density 8 black blocks per side.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• DV4T-1400: what is the maximum amount of ram supported on DV4T-1400

  What is the maximum amount of ram supported on DV4T-1400

  Hello

  Max is 8 GB from the following suppliers:

  http://www.Amazon.com/memory-Pavilion-DV4t-1400-Laptop-upgrade/DP/B00NYKWWDG

  http://www.crucial.com/USA/en/compatible-upgrade-for/HP-Compaq/Pavilion-dv4t-series-%28ddr3%29

  Kind regards.

• Serious problem with CPU 'maximum frequency.

  Hello

  I have a problem with my W510.

  I think that this problem has been around since I bought it, or at least for a month or two after I bought it.

  When I plug the power in, or out, it almost always affects maximum frequency of the processor, as seen in the Windows 7 resource monitor, as well as a program called CPU - Z which shows in fact the current speed of the base.

  When things work correctly, the basic speed is slightly more than 3,000 Mhz.

  However, this speed changes whenever I plug the power inside or outside.

  Usually, it changes for the worse when I plug IN power!

  Often, to plug in, the speed drops to about 1 000 Mhz. Then I Plug - and the speed goes back to 3 000 Mhz. Rebranchez_ the - 2 500 Mhz. out Plug - rest on 2 500 Mhz. Plug in French - 1 500 Mhz. out Plug - 2 500 Mhz. Plug in French - 3 000 Mhz. get out - 3,000 Mhz, etc.. Every once in a while, it even drops to 300 Mhz.

  It seems to be arbitrary and random. Sometimes, it takes me 10, 15 and even 20 times connect the power out and back in to run to 3,000 Mhz.

  The machine is new, there is no fan noise, and anyway, the changes are directly correlated to plug and power in and out and that they never occur themselves - is certainly not overheating or something like that.

  Also, I don't think it's a problem with the power itself, as happens to me in different countries and different places, and in any place if I try to re - plug power enough times - it will eventually be resolved (so of course that there is enough power).

  Is there someone who knows this problem? Any suggestions?

  Thank you

  I found that Throttlestop help me with my own problem speedstep. Speed moves much to light use because of speedstep, but when I use a cpu benchmark to load four hearts they set to max speed and do not move. You can give it a try.

  Kind regards

  Fernando

• Maximum amount of RAM on Y570 and Z570

  What is the maximum amount of RAM that the Y570 and the Z570 can support? It is 8 GB or 16 GB?

  According to the manual, it supports 8 GB max.

  8 gb max7. PC3-10600 1333 mhz ddr3, no parity.
  two-channel capable, two sockets dimm 204-pin so

• Envy TouchSmart 17-j153cl: maximum speed DDR3L RAM in HP ENVY 17-j153cl

  Hello!

  I currently have the Touchsmart from HP Envy 17-j153cl with a BIOS updated. The vehicle has currently 2x8GB sticks of RAM SoDIMM DDR3L strips - 1600 MHz. I was wondering what was the maximum speed of RAM supported by the BIOS. I'm hoping to upgrade to Kingston HyperX 2133 MHz SODIMM 2x8GB DDR3L, but I heard that if the laptop BIOS does not support the higher speed, it is just downclocked. So, I wanted to know if bios default HP on the 17 - j153cl can handle the speed of the potentially new RAM. Thank you for your help.

  Sincerely,

  MajGenRelativity

  (P.S. I can't understand how do I change my forum of MajGenRelativit tag, so a response that makes you earn bonus points )

  MajGenRelativit wrote:

  Seems like a stupid question, but I thought it was worth asking. If I install a 3rd party BIOS, if I cancel the warranty. I'm only this interested in upgrading the RAM because...

  Hello

  1. This permanently cancels the warranty. Are you sure that the machine allows to do this?
  2. I have some older posts to talk about RAM. I usually use the car for example. You can run a race car at high speed on a race track, not on normal/streets roads; especially on roads with speed limits.

  Kind regards.

• What is the maximum amount of RAM for the HP ENVY 15-j015sr model?

  By default, the model HP ENVY 15-j015sr worth DDR3L SDRAM 8 GB. What is the maximum amount of RAM for this model?

  Where can I find a list of the modules supported DDR3L SDRAM for this model?

  Service guide says like that

  Two clients-available/expandable
  memory module slots
  Support for DDR3L (1600 MHz)
  dual channel
  Support for 16834-MB of RAM
  in the following configurations:
  ● 16834-MB (8192 MB × 2)
  ● 12288 MB (8192 MB + 4096 MB)
  ● (8192 MB × 1, 4096 - 8192 MB
  MB × 2)
  ● 6144 MB (4096 MB + 2048 MB)
  ● 4096 MB (4096 MB × 1, 2048-
  MB × 2)

• Aspire 5250 - maximum amount of RAM?

  I have an Aspire 5250-0650 to be exact, with the following characteristics:

  AMD processor Dual-Core E450

  AMD Radeon HD 6320

  4 GB RAM DDR3

  How can I determine the maximum amount of RAM that I can install? Also what speed? I would switch to 8 GB if it is possible and I am aware that it would use RAM SODIMM.

  Thanks for all the tips.

  This model has 2 sockets DIMM supporting 4 GB memory per socket. The maximum size of memory supported by this model is 8 GB, it supports speed DIMM 800 / 1066 Mhz SDRAM DIMM voltage of + 1, 5V and package DIMM 204 PINS DDRIII SO-DIMM.

• Maximum amount of crucial RAM and the maximum amount of RAM of the manufacturer

  Hi, I have a Dell XPS M1530 and were hoping to upgrade the RAM in my system.  I scanned my system with scanner time Crucial System Scanner and Dell, and each of them shows a different maximum amount of RAM.  8 GB of Crucial and 4 GB of Dell.  Anyone know who I should follow?  Thank you in advance!

  Hi, I have a Dell XPS M1530 and were hoping to upgrade the RAM in my system.  I scanned my system with scanner time Crucial System Scanner and Dell, and each of them shows a different maximum amount of RAM.  8 GB of Crucial and 4 GB of Dell.  Anyone know who I should follow?  Thank you in advance!

  You are running 32-bit Windows on it? If so, 4 GB is the maximum, and here again, you will only be able to use about 3.2 GB of it.

• CPU Maximum frequency never exceeds 31%, even under load.

  Windows 7 x 64 runing. Brand new X 220, less than 24 hours old. All windows updates have been applied, etc.

  Power settings Windows resource monitor reports that the maximum frequency of the processor is 31%, regardless. I plugged on current alternative and have set the profile for maximum performance. I am running Prime95 on all four cores. No effect.

  CPU - ID confirms it, the speed of the CPU to ~ 790 Mhz whatever the load on the CPU of the declaration.

  I searched google and the forums and found a thread on the R/L series forum where people have had the cpu, the opposite problem was always running at max frequency: here it seems that their cause was raised by staff. It worries me...

  Looks like speedstep does not work in win7x64

  Is it just a display issue or is the CPU without limitation correctly?

  Thanks for any help.

  SOLVED

  The adapter using my old thinkpad 90W CA solves the problem. The simultaneous use of the dough and the 60W also solves.

  Apparently, my initial forum search wasn't very good, I found a close a few pages on the forums theme that connects to a long debate which essentially suggested these two things.

  Thanks, sorry for the pointless post.

• Maximum frequency in resource monitor

  In Task Manager, Performance tab, button resource monitor, which is the "percentage of the maximum frequency" and is related to the Turbo Boost?

  I have a 3.4 GHz quad-core i7 with Windows 7 64 bit.  The percentage of the maximum frequency is usually 103%, but sometimes it's 102 or 101.  I downloaded an Intel program that displays the status of the Turbo Boost.  I had all four cores running, so the Turbo Boost was 3.5.  The Max Freq 103%, and being about 103 percent of the 3.4 3.5, I think that showed the Turbo Boost.  But I ended up some processes, the Turbo Boost has increased, but this percentage is not gone - in fact, he came down.  So, what's the percentage of frequency and is related to the Turbo Boost?

  Hello

  You can not push beyond a certain point and some variance is scheduled. Check with
  Intel, documentation and community support. It's really a hardware problem and
  not directly related to Windows so that you ask the right questions however in the wrong
  places. A person fully familiar with your processor and your hardware can give you
  examples of what results you can expect.

  Intel TurbBoost FAQ
  http://www.Intel.com/support/processors/sb/CS-029908.htm

  Intel mode
  http://www.Intel.com/content/www/us/en/architecture-and-technology/turbo-boost/turbo-boost-technology.html

  Intel communities
  http://www.Intel.com/content/www/us/en/blogs-communities-social.html

  Technology Intel mode monitor
  http://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=19105

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Maximum CPU and RAM to the Virtual Image

  Hi all

  I have the host whose hardware 2 cpu machine each with 4 core that is all of the 8 and 16 GB of Ram. On this server image Linux single runs, which has mysql in there. currently image use 4 core processor and 4 GB of RAM.

  As I'm observing some performance issue, I want to increase cpu and memory allocated to the virtual machine.

  Can someone will let me know maximum CPU and RAM I can attribute to the image without destabilizing or errors.

  I'm under VMware ESXi 5.5.0

  Hi again mithrandirr,

  you don't have to worry about the allocation of CPU. The ESXi VMkernel is very flexible in terms of handling & plan the resources of the processor. You'd be fine same allocation the CPU power you have (so 2 Sockets x 4 cores per Socket) to the server. The CPU cycles are carried out on request if you don't have to worry about making your physical host fails or otherwise degraded performance. Therefore, you can go ahead and increase the number of base to 6 in what either I described above. Just for your information, the internal processes of the ESXi (referred to as 'worlds') always run on CPU logic 0 and consume very little resources.