HP Pavilion dv8-1099eo: device Base system and unknown device drivers Windows 7 Ultimate lack
Hello
Since a new installation of Windows 7 64 bit it is has little material without driver on all simply not recognised. Here is the hardware ID's I hope someone can help get this sort? Laptop computer runs much slower with the CPU it has. An upgrade from 4 GB to 8 GB of RAM is useful?
1. base system device
PCI\VEN_197B & DEV_2384 & SUBSYS_7001103C & REV_00
PCI\VEN_197B & DEV_2384 & SUBSYS_7001103C
PCI\VEN_197B & DEV_2384 & CC_088000
PCI\VEN_197B & DEV_2384 & CC_0880
2 - system base unit
PCI\VEN_197B & DEV_2382 & SUBSYS_7001103C & REV_00
PCI\VEN_197B & DEV_2382 & SUBSYS_7001103C
PCI\VEN_197B & DEV_2382 & CC_088000
PCI\VEN_197B & DEV_2382 & CC_0880
3. base system device
PCI\VEN_197B & DEV_2383 & SUBSYS_7001103C & REV_00
PCI\VEN_197B & DEV_2383 & SUBSYS_7001103C
PCI\VEN_197B & DEV_2383 & CC_088000
PCI\VEN_197B & DEV_2383 & CC_0880
4 - unknown Device
ACPI\ENE0100
* ENE0100
Thank you
Michael
1, 2 & 3 is listed under "Driver-storage" JMicron card reader ACPI\ENE0100 should be ENE CIR Receiver Driver under "driver-keyboard, mouse and input devices.
On your page of Support here:
Tags: Notebooks
Similar Questions
-
Hi guys,.
After doing a clean update on my HP elitebook 8570W I had a few unknown devices in my device manager.
The first is a device called "base system" in PCI Slot 2 (bus PCI 36, device 0, function 1). I tried everything in my ability to determine what is this device and what drivers to install, so far without success.
In the same section. other devices, there is another unknown device on PCI Express Root complex that gives me the same headache.
I hope you guys can help me understand this.
If you need further information, I will be happy to provide that.
Kind regards
Didier
Hello:
The base system device is certainly the JMicron card reader needs the driver, not the alcor one.
You need this driver...
If the driver above does not installing it automatically, try to install manually.
To manually install the driver, go to Device Manager, click the Base system device.
Click the driver tab. Click on set to update driver. Select her browse my computer for driver software option and find the folder of the driver that was created when you ran the file.
The file is located in C:\SWSetup\sp63637
Make sure that the include subfolders is selected and see the driver installs like that.
-
I have a laptop acer 5552 on windows edition Home premium... .He crashed and a friend used Windows 7 ultimate get back to work how to make Home Premium back on that I do not have the disk backup I lost it
Hello
- What were the changes made before the problem occurred?
- What happens when you start you computer?
- Are you able to boot to the desktop?
- You receive an error message?
- If your friend has installed Windows 7 ultimate or just fixed the crash problem - was - it own installation\custom?
- What version of Windows are you using?
- When you say "windows home premium" are you referring to Windows Vista or Windows 7?
If you are able to boot to the desktop, you can check the version of Windows.
Response with more information.See also: -
Device base system &; coprocessor problem with driver Windows 7 - Pavilion dv9720us
I have a HP Pavilion dv9720us which was very glitch with Vista 32 bit. After saving all on an external hard drive from Seagate Replica, I did a clean install of Windows 7 64-bit. Everything seems to work, but I get error messages stating that the x 2 Base system device is not working because it doesn't have the correct driver, the coprocessor is also mentioned as not having not the correct driver. All 3 of these devices are listed in the other devices category in Device Manager. In addition, my laptop has 4 GB of RAM and still Windows 7 recognizes only 2 GB. Help! I deliberately enhanced to reduce the glitchy Vista answers. I could go on Windows 7 32 bit, but I don't know who's going to solve all my problems.
Thank you very much!
Kathy
Remove your Ram and install it again.
Notes:
1. ensure that, then you have no battery or ac adapter connected to your laptop.
2 Manufacter installed in this model 2048 MB of Ram (2 GB), so if you have not added 2 GB on your own all is ok.
There will always be problems and your really have 4 GB:
You check Ram with Memtest86 + or GoldMemory. Just burn it on CD *.iso file and run the test. You may need to change the boot sequence in the Bios (to get the BIOS press F10 boot).
Message edited by Daniel_Potyrala on 10/30/2009 12:57 -
The HD to SSDS: how to restore the system and all the drivers?
Hello
I changed the HDD with a SSD. Now I want to restore the system (Windows 8) and all the drivers and applications. To do this I use (with DVD) HP Recovery Manager and I choose to install a clean install of the system, drivers and applications. After the copy of the set in the new hd, when the computer is reset, I get the message that there is no system in my HD!
Why? What can I do?Thank you
Enter the BIOS
Go to the tab system set
Scroll Startup Options
Go to boot order
Move the current SSD as the first device by following the instructions in the right pane
After making changes to the boot order, press F10 and click Yes to save the changes and then exit from BIOS -
HP pavilion n225se 15: device drivers
Hello team hp,
I have a new hp pavilion n225se 15 , who had only one language windows 8.1, I had formatted it and downloaded windows 7 (64-bit) instead and I faced a problem with my laptop drivers, cause on the hp support, I found the drivers for windows 8.1 and when I choose windows 7 I had fewer options to download a sample (the chipset in windows 8.1 exist and on 7 does not have audio drivers the same)
Please can you help me to find all my laptop driver
Thank you and best regards
Hello:
You should be able to use all the W7 x 64 drivers and the software of this model to yours except the BIOS and firmware files.
When you install the graphics drivers, you must:
1. install the Intel Chipset Installation Utility driver and reboot.
2. install the Intel HD graphics driver and restart.
3. install the Nvidia HD graphic driver and restart.
-
Pavilion 17-g113dx: Data Acquisition USB and PCI need drivers for HP 17-g113dx
The operating system is increased from 10 Windows to Windows 7. Struggling to find the right drivers for USB ports
Hardware ID:
PCI | VEN_8086 & DEV_1603 & SUBSYS_8094103C & REV_09
PCI | VEN_8086 & DEV_1603 & SUBSYS_8094103C
PCI | VEN_8086 & DEV_1603 & CC118000
PCI | VEN_8086 & DEV_1603 & CC1180
Hello:
You need these drivers...
PCI | VEN_8086 & DEV_1603:
This package contains the driver which allows Intel platform dynamic and thermal firmware setting. Intel platform dynamic and thermal environment information system temperature and power use for the thermal protection of the system to work properly. This package is provided for the laptop models running a supported operating system.
File name: sp71185.exe
USB3: Download, unzip and run the setup.exe file on the left side of the Web page.
-
HP PAVILION G6 2290sx: device drivers
Hi, I recently installed windows 7 32 bit on my laptop and I need device drivers for it.
Here is the hardware Id of all controllers.
Bluetooth controller
PCI\VEN_1814 & DEV_3298 & SUBYS_18EC103C & REV_00
PCI\VEN_1814 & DEV_3298 & SUBYS_18EC103C
PCI\VEN_1814 & DEV_3298 & CC_0D1100
PCI\VEN_1814 & DEV_3298 & CC_OD11
ETHERNET CONTROLLER
PCI\VEN_10EC & DEV_8136 & SUBSYS_183F103C & REV_05
PCI\VEN_10EC & DEV_8136 & SUBSYS_183F103C
PCI\VEN_10EC & DEV_8136 & CC_020000
PCI\VEN_10EC & DEV_8136 & CC_0200
NETWORK CONTROLLER
PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C & REV_00
PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C
PCI\VEN_1814 & DEV_3290 & CC_028000
PCI\VEN_1814 & DEV_3290 & CC_0280
PCI DEVICE
PCI\VEN_10EC & DEV_5229 & SUBSYS_183F103C & REV_01
PCI\VEN_10EC & DEV_5229 & SUBSYS_183F103C
PCI\VEN_10EC & DEV_5229 & CC_FF0000
PCI\VEN_10EC & DEV_5229 & CC_FF00
PCI SIMPLE COMMUNICATIONS CONTROLLER
PCI\VEN_8086 & DEV_1E3A & SUBSYS_183F103C & REV_04
PCI\VEN_8086 & DEV_1E3A & SUBSYS_183F103C
PCI\VEN_8086 & DEV_1E3A & CC_078000
PCI\VEN_8086 & DEV_1E3A & CC_0780
SM BUS CONTROLLER
PCI\VEN_8086 & DEV_1E22 & SUBSYS_183F103C & REV_04
PCI\VEN_8086 & DEV_1E22 & SUBSYS_183F103C
PCI\VEN_8086 & DEV_1E22 & CC_0C0500
PCI\VEN_8086 & DEV_1E22 & CC_0C05
USB BUS CONTROLLERS
PCI\VEN_8086 & DEV_1E31 & SUBSYS_183F103C & REV_04
PCI\VEN_8086 & DEV_1E31 & SUBSYS_183F103C
PCI\VEN_8086 & DEV_1E31 & CC_0C0330
PCI\VEN_8086 & DEV_1E31 & CC_0C03
I hope that respond you soon.
Thank you.
Hello:
You need these drivers...
Bluetooth controller
ETHERNET CONTROLLER
NETWORK CONTROLLER
PCI DEVICE
PCI SIMPLE COMMUNICATIONS CONTROLLER
SM BUS CONTROLLER: Note: first install this driver and restart.
USB BUS CONTROLLERS:
-
Partition reserved system and several versions of Windows
Separated from this thread.
I noticed that later "versions" of windows 7 (Pro), instead of a 100 GB partition, build a 357 MB system reserved partition. This is also the case for all / most new systems that we receive with Win 7 Pro preinstalled where I work (part-time).
This is also the case with the refurbished Dell OptiPlex 980 I bought last fall. It came with a 350 GB hard drive, the system reserved Partition was / is 357 Mb.
After cloning partitions of windows 7 to a 750 GB hard drive and the narrowing of the Win 7 Pro ("C") 152,49 GB partition I installed Windows Pro 8.1 in its own partition in the GB 545,79 remaining.
Windows 8.1 installed correctly, without any problem, using the system partition reserved 357 existing Mo created by windows 7. All major worked from the go and are still working fine today.
I noticed that when I start to Win 7 Pro, & assigns the drive letter "D" to the partition Win 8.1 Pro and Win 8.1 Pro did the same thing with the partition Win 7 Pro. Of course, the boot partition must be 'C '. Apparently, modern operating systems are "smart enough" to recognize this and make the appropriate drive letter reassignments.
Another note, I have two older systems Dell OptiPlex 620 (the two 32-bit) provided with Windows XP Pro installed. On the same Machine, after the "C" shrinking Windows XP to 25 GB Partition, I installed Windows 7 Pro (32 bit) on the remaining 207 GB. On the second machine, I shrunk Windows XP Pro 60 GB and installed Win 7 Pro on the 125 GB remaining. All of the work so far is fine.
Windows 7 Pro did not build a Reserved Partition system on each computer (Opti-630). I'm assuming it uses the Win XP partitions on them. However, if I remember correctly, Bitlocker is not available in 32-bit versions, so reserved partition is not necessary. Perhaps the other files normally placed in this score are in a "special feature" in Win XP partition?
Norm Ives
Norman,
There is some legacy features that are present in all versions of Windows, even Windows 10. One of them is the label C partition to the HARD drive partition where Windows is installed. At the time, when MS-DOS was in use and Windows 1.0, Windows was available as an add-on to the only existing MS-DOS and Windows cannot be installed directly without MS-DOS. Meanwhile, there were two present floppy drives, 'A' and 'B '. 'A' has the files of an operating system and 'B' is the disk storage for user files. So when the HARD drive came, it was the label 'C '. When Windows 3.1 came out, it was a huge plant at this time that it required a HARD drive for installation. The C label was added to HARD drive so HARD drive added. This legacy is maintained to this day. So you see what Windows installation, the installed Windows partition will be labeled as C only. It is also the reason why, every time that you add a floppy drive, the automatically assigned driver letter is or B and nothing else.
Coming to the system reserved partition, it contains the boot files needed to start Windows (and also of BitLocker data, if any), but present in the Windows version where BitLocker is not present (as in the case of Windows 7 Home Premium). Up to Windows XP, the boot settings were managed by a file by the name boot.ini, present in C:\ (at the root of C:\). Then when you upgrading or switching from Windows XP, and that no unformatted partition is available, this means that a new partition cannot be created. In this case, the boot files will be will deposit in the Windows installation partition only. So system reserved partition will be created during the new installation of Windows Vista or later, but if upgraded from Windows XP, startup files will be deposit in the installed Windows partition only.
-
Problem of Bluetooth device with windows 7 ultimate 32 bit (AND NOT the PHONE NOKIA)
Hi, I have a compaq presario THAT CQ 61 pre-installed with windows vista home premium. I add a bluetooth headphone iluV i212 & worked with windows vista. When I installed windows 7 for the first time, he also worked but when I reinstalled windows 7 ultimate, yet, it does not & windows needs drivers for this helmet. So please provide me with the latest driver bluetooth for my laptop in order to solve this problem. Thank you
You can install this driver and check... ftp://ftp.HP.com/pub/SoftPaq/sp43501-44000/sp43930.exe
-
Envy of HP dv7 - 7373ca: lack of device drivers Window 7 64
I have leveled down Windows 8 for Windows 7 Professional with success and that you have downloaded all current Windows updates available at this time. I downloaded all the drivers from the HP support for this computer site (HP Envy dv7 - 7373 ca) successfully with the exception of the Nvidia Geforce GT driver HP which gives me an error indicating "file intel requires.
When I open the device (see above) Manager, I have five "other devices" that have no drivers and one of the two adapters without driver. I searched HP forums, web, updates of drivers intel and Microsoft Updates for the drivers, nothing works. Please provide a link to the drivers required to use all the above listed features above to be dysfunctional.
Finally, the touchpad when typing is extremely annoying! Breast of Windows 7, is it possible to disable it?
Hello:
You can use all the W7 x 64 drivers and software by the dv7t-7000 on your model, except the BIOS and firmware files.
To install the graphics drivers first install the driver Intel chipset installation utility first and then restart. Which will also install the smbus controller.
Then, install the Intel HD graphics driver and restart.
Then, install the graphics driver nvidia and restart.
Ethernet:
This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.
File name: sp56167.exe
Comms Simple PCI:
This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.
File name: sp56158.exe
USB3:
This package provides the driver for the Intel USB 3.0 controller host for the notebook models and operating systems. The driver allows USB 3.0 devices.
File name: sp56164.exe
Unknown is probably...
This package provides the HP ProtectSmart Hard Drive Protection software (HP 3D Driveguard) for the laptop models running a supported operating system. HP (HP 3D Driveguard) ProtectSmart hard drive Protection software protects the hard drive of "parking the heads ' if the laptop fell accidentally, or is suddenly hit by another object.
File name: sp61037.exe
I recommend that consult the user guide for your model touchpad issue.
-
I ran System Mechanic 12.7 on my PC and rebooted. I get on the desktop and then I run Windows Media Player. It appears, but there is only a blank screen without music or videos. Help, please?
Follow the second option of the guide
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html
Check to see if it works. If not,
Use the option of restoration of system mechanic, then uninstall it and if possible get a refund.
If still doesn't work do not do a system restore to the State before installation.
Type "rstrui.exe" without quotation marks in the start menu and follow the directions.
-
Error encountered and unknown code B56 Windows update
B56 Windows update error encountered and unknown code.
* Title *.
B56 Windows update error encountered and unknown code. I can't install 10 updates because of this ERROR! Someone at - it a difficulty for me or answer? I tried to install these updates for a few weeks now.pjrjt,
You can watch the answer in this thread. It covers the issue you see.Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
I want to transfer my windows 7 ultimate in my former office in my macbook, but I lost the product key and when my office had been repaired, the installation of my windows 7 ultimate is already replaced with windows 7 Professional. So now I have that drive. What can I do so that I can install my windows 7 ultimate on my macbook through bootcamp?
Try asking a surrogate key then. If you have problems, try contacting Microsoft Support;
Information: Microsoft general site: http://support.microsoft.com/contactus#tab0
1-800-642-7676 (1-800-MICROSOFT)
-
Pilot missing hp pavilion dv-1275mx, 3 'base system device '.
Well the title says it all, and it says code 28
Yes...
http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-75452-1&cc=us&DLC=en&LC=en&OS=4062&product=3860476&sw_lang=
The JM (B) can be JMicron...
Maybe you are looking for
-
tabs open only when the mouse moves
Updated to 38.2.0 ESR, now new links (tabs) not be loading not unless I constantly move the cursor. This has happened in a previous update, and I reloaded an older version. Is there another problem?
-
QuestionI want to record with < alt > < s > in the Exact program online. This function does not work. This is the first time I use this program with firefox. edit, escaped mod < s > in order to avoid the line through question
-
An Xbox smartglass Android app
The xbox app does not sign, he always tells me to set up a real account from a browser. I checked, and there is a page on the Microsoft website saying that my live account is on. I don't have an Xbox, I just want to see the profile of my friend, so t
-
C4780 will not scan in mac Mavrick, worked fine before update
I have an iMac and upgraded to Mavrick. Now my scanner, Photosmart C4780, does not scan. I have HP scan, 2.4.0(5), that has worked well before. I can't find an upgrade to scan from HP on the web site. When I use it, nothing happens and I have to use
-
There is not bios, or anything else showing
I have a dimension 4550 requiring an upgrade, but what I didn't have a battery in it was dead. I disconnected to do the upgrade and now facing a black screen. I have a new battery installed and dvd cd players work but the screen does nothing... Wha