HP Elitebook 8570W: driver problem: other devices - device base system and unknown device.

Similar Questions

• HP Pavilion dv8-1099eo: device Base system and unknown device drivers Windows 7 Ultimate lack

  Hello

  Since a new installation of Windows 7 64 bit it is has little material without driver on all simply not recognised. Here is the hardware ID's I hope someone can help get this sort? Laptop computer runs much slower with the CPU it has. An upgrade from 4 GB to 8 GB of RAM is useful?

  1. base system device

  PCI\VEN_197B & DEV_2384 & SUBSYS_7001103C & REV_00
  PCI\VEN_197B & DEV_2384 & SUBSYS_7001103C
  PCI\VEN_197B & DEV_2384 & CC_088000
  PCI\VEN_197B & DEV_2384 & CC_0880

  2 - system base unit

  PCI\VEN_197B & DEV_2382 & SUBSYS_7001103C & REV_00
  PCI\VEN_197B & DEV_2382 & SUBSYS_7001103C
  PCI\VEN_197B & DEV_2382 & CC_088000
  PCI\VEN_197B & DEV_2382 & CC_0880

  3. base system device

  PCI\VEN_197B & DEV_2383 & SUBSYS_7001103C & REV_00
  PCI\VEN_197B & DEV_2383 & SUBSYS_7001103C
  PCI\VEN_197B & DEV_2383 & CC_088000
  PCI\VEN_197B & DEV_2383 & CC_0880

  4 - unknown Device

  ACPI\ENE0100
  * ENE0100

  Thank you

  Michael

  1, 2 & 3 is listed under "Driver-storage" JMicron card reader  ACPI\ENE0100 should be ENE CIR Receiver Driver under "driver-keyboard, mouse and input devices.

  On your page of Support here:

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-DV8-1000-entertainment-notebook-PC-series/4011373/model/4040272#Z7_3054ICK0KGTE30AQO5O3KA30R1

• updated my pavilion tx1000 for win 7 and missing a driver. under other devices - coprocessor... help

  Updated my tx1000 Pavilion to Win 7 and missing a driver I can't find online. The missing driver is listed under other devices and called coprocessor... help please

  Hello:

  Here is the link for the driver you need.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-51717-1&CC=US&DLC=en&LC=en&os=2093&Product=3185028&sw_lang=

  Paul

• HP ELITEBOOK 8540w: DRIVER PROBLEM

  Hello I need drivers for it.

  Base system device

  PCI VEN_1180 & DEV_0592 & SUBSYS_1521103C & REV_14
  PCI VEN_1180 & DEV_0592 & SUBSYS_1521103C
  PCI VEN_1180 & DEV_0592 & CC_088000
  PCI VEN_1180 & DEV_0592 & CC_0880

  Base system device

  PCI VEN_1180 & DEV_0843 & SUBSYS_1521103C & REV_14
  PCI VEN_1180 & DEV_0843 & SUBSYS_1521103C
  PCI VEN_1180 & DEV_0843 & CC_088000
  PCI VEN_1180 & DEV_0843 & CC_0880

  Unknown device

  ACPI\VEN_HPQ & DEV_0004
  ACPI\HPQ0004
  * HPQ0004

  Hello:

  You need these drivers...

  X 2 base system device:

  This package contains the Ricoh Media Card Reader Driver for the notebook models and operating systems. The Ricoh Media Card Reader driver supports the following media: Memory Stick, xD-Picture Card, MMC, SD and smart card.

  FTP://ftp.HP.com/pub/SoftPaq/sp46501-47000/sp46972.exe

  Unknown dev:

  This package provides HP 3D DriveGuard to the notebook models and operating systems. HP 3D DriveGuard receives notifications of the built-in accelerometer and protects the hard drive (HDD) by automatically "the heads of parking" to reduce the risk of damage if the laptop is accidentally moved or deleted.

  FTP://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64144.exe

• Driver problem with prolific USB-to-Serial and Windows 7 connector

  I'm trying to connect a UPS to PowerPanel to my new ACER computer with 64-bit Windows 7 via a prolific USB-serial connector software. The convenience store says he has a driver problem the convenience store is unable to correct. However, messages also said that my driver is up to date and the device working properly. I have installed, uninstalled and tried to fix several different drivers, run the troubleshooter, etc.. I tried to run the stand-alone Windows Installer, but it says "not compatible with your computer." Help! Is there anything else I can try?

  Hi Mary,

  Until solve us the problem we need more information on the issue.

  ·        What is the exact error message that you receive when you connect theprolific USB-serial connector to your computer?

  ·         Could you plug the connector on the computer as soon as possible without any problem?

  ·         What is the model number of the connector?

  ·         The ups and the computer manufacturer and what is the model number?

  ·         Who is the stand-alone Windows Installer you tried to install?

   

   

  You can first check if the USB connector to prolific series model if its compatible with windows 7 Access the link below to check the compatibility with Windows 7.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  You can also contact themanufacturer prolific USB-serial connector and check if the device is compatible with Windows 7 and if you need to install any other drivers to get the device to work.

   

   

  Post back with the required information.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• FCA202 7 - driver problems - Windows 64-bit operating system!

  I had this FCA202 interface today and im having a LOT of trouble of implementation... I got the internet 1.3 update, but it says it's for 32-bit operating systems... and ive tried everything looks... I can't install the drivers! Help!

  Hi Mike,.

  For assistance, please provide brand and full model number.

  We need to check if your device is compatible with Windows 7.  See the Windows 7 Compatibility Center

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=hardware&s=FCA202

  You can follow the steps mentioned in the link below

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  Please contact the manufacturer of your device for known problems.

• Scanner driver problem with - 8.1 to Windows and HP L7680 AIO

  Hey folk,

  I have a problem with my HP L7680 AIO.

  I did an upgrade to 8.1 Windows x 64

  I have install the driver real 14.8.0 version.

  The printer works but the scanner hurts.

  When I begin a scan I get an error message and the scanning process is cancelled.

  I have this error message with photoshop, HP solutions and any other scanner software.

  Printing HP and doctor Scan says I have to contact support.

  Here I am all idea?

  Either way, I disabled my Antivirus software during installation.

  Thank you very much.

  Greetings

  Markus

  Hello

  I solved the problem by myself.

  For people who have the same problems...

  It was the prevention of intrusions by more Portscanner antivirus.

  I could adopt new the situation with other systems, and this is the reason why I say that it was definitely the Portscanner.

  The fool is the AV-Suite of disabling showed no effect.

  Only after that I put the settings in the AV suite that IPS should not control the ports everthing works fine.

  Things difficult, but now it works...

  See you soon

  Markus

• EliteBook 2540p: driver problems Server 2012

  I wanted to convert my Elitebook 2540p on a Server Standard of 2012, he met all the technical aspects and does not see well if any challenges.  After installation (which was successful) HDMI, VGA, as well as several errors about Device Manager drivers is appeared. Not able to image of casting and or project VGA or HDMI to external monitor.  Have downloaded all the drivers on the HP Site, I can find about Windows 8, Windows 7, but still in deca.  Can someone please provide a direction... Closed, it's what I'm experienceing.

  THX

  Tim

  

  Yes... I know that there is no support for 2012 server converts this HP product. So that being said, thank you very much for giving your talents and time of day on these issues. I will follow your direction and do the best I can.  Once again thank you very much!

  Tim

• HP Elitebook 8470p driver problems

  Hello. I'm trying to imagine a HP8470p with Windows 7 x 86 business. I have an unknown device is coming.  The hardware ID is ACPI\HPQ6000 * HPQ6000.

  Can someone tell me what driver I need for this camera?

  Thank you!

  Hello

  You need HP 3D DriveGuard 5 from the following link.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5212907&prodNameId=5212908&swEnvOID=4054&swLang=13&mode=2&taskId=135&swItem=ob-110813-1

  Kind regards

  DP - K

• Driver problem after changing my operating system

  Hello

  I have a HP pavilion G6 2284 ca (C7C71UA #ABL). 3 months ago, I decided to change my operating system to windows 7 pro (I had windows 8), but 2 of my 3 USB port do not work. When I try to do an update, it says that I don't have the drivers for them. I tried to look on the HP website, but there is no driver for windows 7. You have an equivalent for drivers?

  Try > AMD USB 3.0 driver

• Problem restoring stuck MacBook Pro system and time machine

  This morning my retina MBP (El Cap 10.11.4, updated about a week ago) has frozen. It was working fine yesterday, but wake from sleep this morning nothing would go, apps wouldn't start, nothing, so I rebooted. He got about a third of the way between the progress bar white on black screen and hung with a spinning wheel.

  Then I tried to secure boot and made me to the login screen, but it still turns after that I entered the password. (The guest account and the other I put in place but rarely use seem to work well, it's just me hanging). Reset NVRAM made no difference.

  Then I went to recovery mode and has conducted an audit of disk first aid, who reported no problems. So, I used the disk utility to make a disk image to backup to an external drive and then to the Time Machine system restore. However, it asks for the password for 'System administrator' and rejects everything I try. The TC is configured as "Discs safe with accounts" (not ' device password') and there are two custom accounts and the wifi password. I can't check my backup settings now, but I think that it is only for my account, so I wonder if even is a system restore file. I would try to change the airport disk access settings but I'm afraid it will just trash my backups.

  Suggestions for free my Mac or enter the system restore (or restore just my account) until I try a reinstall?

  Resolve startup problems-

  Resolve startup problems - (2)

  Resolve startup problems - (3)

• problem w / Airport Extreme base station and modem Netgear broadband

  I just changed to ATT Uverse to Time Warner - internet only.  With Uverse, I was using my Airport Extreme base station to create a wireless network, and it has worked well in this capacity.  When you switch to TWC, the tech got the modem (TWC allows you to buy your own modem, so I bought a Netgear CM600 a recommended model) enabled and works very well, but could not get the Airport base station to talk about her (yellow light blink on the base station).  So, he opted for a TWC wireless modem/router.  Interestingly, I found that I could plug the Airport base station in the TWC modem (without any reconfiguration, just plugged into the WAN port base station to the modem ethernet port, as I had had with Uverse equipment) and voila!  It worked immediately.

  So, I called TWC to retry my Netgear modem.  I have the base station power off, plugged on the ethenet port Netgear, put back under tension and just got the blinking light.  I know that the modem does not work, because my iMac's network to the internet through the base station, for the Netgear, and go outside and I can fine surf in this way.  So it is something in the wireless configuration that must be different between the TWC modem and the Netgear modem.

  Obviously, I'm not an expert at this, basic troubleshooting tips would be appreciated.  The base station functions as a router (I can connect through a port ethernet through it), it is simply not generate a WiFi network for me...

  Thanks for the tips

  Steve

  Carlsbad, CA

  So, he opted for a TWC wireless modem/router.  Interestingly, I found that I could plug the Airport base station in the TWC modem (without any reconfiguration, just plugged into the WAN port base station to the modem ethernet port, as I had had with Uverse equipment) and voila!  It worked immediately.

  If your AirPort Extreme has been in its original configuration, it would act as a wireless Internet router. If you connect another router upstream to the extreme, there is work, but you'll have a condition known as: Double NAT. This isn't necessarily bad, but should be avoided if possible. To do this is simply to reconfigure the downstream router (in this case, the extreme) under a bridge. This disable its functions of routing and remove the error condition.

  However, if your extreme base station has been reconfigured as a bridge, if connect you directly to a simple modem, like the Netgear CM600, then this configuration will not work because no device will provide the necessary routing functions.

  It's always a good idea to perform a full power recycle your network hardware during change of equipment. Maybe that's the only thing your missed when you design your own? If you haven't done so already, please give it a try with the CM600 & Extreme combo. After return your results.

• EliteBook 8440p: Base system device problems

  I'm having a problem with the Base system device PCI bus 69, device 6, function 2 (code 28) on my Elitebook 8440p.

  I was working on my laptop and my Wifi says "no connection available. I made the necessary troubleshooting and landed on it.

  I've updated the paks, individually made chip so that other device drivers are updated and the system indicates that this driver is not available when I try to update. Any suggestions?

  Hello:

  You have need of this driver for the... base system device is for the reader who is not related to the Wireless does not.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=4095873&swItemId=ob_79317_2&swEnvOid=4059

  If the Wireless does not work and you need a driver for it, there will be a labeled device network controller where you see the listed base system device.

• EliteBook 8540p: Base system device driver

  Greetings,

  I recently updated my laptop to Windows 8.1.  When I went to the Device Manager, I noticed a question mark next to "other devices".  When I expand it, it shows two options for "device Base system and both have the Exclamation Points next to them."

  I tried to update the drivers and it tells me: "Windows could not find driver software you're your device."

  An inspection further, I see that they both have the same hardware ID:

  PCI VEN_1180 & DEV_0592 & SUBSYS_1521103C & REV_14\4 & 1270e8d4 & 0 & 33F0

  I'm trying to find the recommended drivers for this.  Any help is appreciated.

  Thank you!

  Hello

  Try the driver from the link card reader.

  http://ftp.HP.com/pub/SoftPaq/sp46501-47000/sp46972.exe

  Kind regards

  DP - K

• No driver installed for any other device

  How to identify and download the driver for the universal series (USB) bus controller.

  Other devices in the Device Manager icon and the computer in both devices and printers have a yellow exclamations.  In the properties of the window for the icon of the computer is listed as hardware ID

  PCI\Ven_8086 & DEV_1E31 & SUBSYS_05431028 & REV_04
  PCI\Ven_8086 & DEV_1E31 & SUBSYS_05431028
  PCI\Ven_8086 & DEV_1E31 & CC_0C0330
  PCI\Ven_8086 & DEV_1E31 & CC_0C03

  The hardware ID exact same are also for other devices in Device Manager.  The icon of the computer in devices and printers has my computer name.

  Until I uninstalled the driver for other devices, the icon of the computer was named unknown device, but now it's LIGHTELLEN-PC.

  I tried to update the driver, but Windows Updater cannot find a driver.  I have Windows, turned on automatic updates, but have selected download updates but let me decide whether to download and install them. I don't know how to identify the driver updates.  I checked all the boxes (4) to choose how Windows can install updates.

  Someone can tell me how to locate, download, and install this driver?  I would like to get rid of the yellow exclamations in devices and printers, and in Device Manager.

  I have a Dell XPS 8500.

  Check here to see Ellen, under "Chipset".

  XPS 8500

  http://www.Dell.com/support/drivers/us/en/04/product/XPS-8500