HP Pavilion dv9700: display distortion of the HP Pavilion dv 9700.

Similar Questions

• My display suddenly developed the columns of white dashes and has been distorted in many places.

  My display suddenly developed the columns of white dashes and has been distorted in many places. Subsequently, do not display and the computer turns off to protect themselves. I opened it in safe mode, and the screen is fine. I suppose a software problem. I tried to download a driver for AMD Radeon HD 6570 GPU without result and tried a reset to an earlier date also with no luck. Does anyone have any suggestions?

  Hello

  You certainly know the graphics that, when you say Radeon?

  You normally get drivers Chipset/video/graphic of your computer/notebook or the graphics card, if you have installed a graphics card manufacturer's Web site.

  If he continues to play until after you have installed the latest drivers, next step is to swap the graphic card with a good if a desktop computer.

  This is the path, and the problem is somewhere along it:

  Monitor > cable > Port > that is either connected to a graphics card in a slot on the motherboard or integrated graphics hardware that is part of the motherboard.

  When a laptop; If under warranty, contact the manufacturer.

  If it is not under warranty, contact a repair shop, local.

  See you soon.

• Program windows not fully displayed - cannot see the buttons

  Problem:

  1. After selecting the program HP PC Recovery CD/DVD Creator, the Welcome window appears but is not displayed entirely.  The portions and right at the bottom of the window are transparent.  I don't see other buttons that I should be able to select.  I also try to use the program end button (red box with white x) located on the top right of the window, and the program will not end.  To close the program, I have to finish the process via the Windows Task Manager.

  2. when the HP automatic update alert window returns to the part at the bottom right of my office, letting me know that updates are available and to ask if I would like to install the updates, the alert window is not completely visible.  I don't see other buttons that I should be able to select.

  3. in both cases (1 and 2), if I place my pointer over the window and select Enter then the program will proceed to the next step.  If a pedagogical (pop-up) window on the top of the main window of the program, I am able to see this pop-up window in its entirety, and then select options as needed.

  Question: What is the cause?  How can they be corrected?

  Thanks in advance for any input.  Please see information system below.

  -Angela

  ``````````````````````````````````````````
  old computer: HP Pavilion PU131AV / a1050y, Intel Pentium 4 CPU 3.20 GHz, 2 GB RAM, Windows XP MCE, SP3 32-bit, Nvidia GeForce 6600
  new computer: HPE-180 t, Windows 7 Pro (64 bit), Nvidia GeForce GT 220, Intel Core i7 - 930 quad-core CPU @ 2.80 GHz, 8 GB of RAM

  Hello

  It is a known issue and the difficulty there is in the link below.

  http://support.HP.com/us-en/document/c00595956

  Hope this helps for you...

• Satellite A300 PSACGA - display distorts and freezes

  I have a Satellite A300 PSACGA-02V010 running Vista Ultimate.
  The laptop is around the age of 10 months and 12 hours a day for work purposes.

  For some reason there is a few days display distorted (pixelated) and froze.
  The only way to recover was a difficult start. Restarted the laptop it shows the desktop for about 30 seconds and did a repeat freeze performance. I restarted mode safe and it works very well for days.

  I thought there must be something loading at normal startup is causing the problem, so I disabled everything I thought I could do without and restarted in Normal Mode. Once again the office poster for about 30 seconds and then frozen again. I tried to roll using recovery, charging display and BIOS drivers from the Toshiba site but continues to the situation.
  In SafeMode it never freezes up

  Any suggestions?

  Hey great. Happy to know that you have found the solution to this.
  Several times on this forum I write that it is not easy to give an answer or suggestion, what can be done. In any case thanks for the comments.

• Video Copilot 3D and error messages from distortion of the heat element

  I have a problem with the 3D and plugins of distortion of the heat element. My work optical flares and contraction with After Effects. I have version 10 of Windows and CC 2015. When I choose a new composition and set a solid color. I applied element 3D or distortion of the heat to test if the plugins worked. It shows a Panel to check-in After Effects, including optical flares and the shaking never asked me to register on behalf of video Copilot.

  It displays an error message after I have shut down the Panel.

  

  How can I fix it? Brucgovn

  > How do I know the plug-ins of VC for the current version?

  You can get this information on the site of video Copilot:

  VIDEO COPILOT

• Does anyone know how to display along with the app on the Mac App Store in the Sierra of MacOS?

  Does anyone know how to display along with the app on the Mac App Store in the Sierra of MacOS?

  I've just updated to Sierra. Since the upgrade did several reboots. When I discover an app the side also shows "4 +" or similar and I click on the note to view reviews and ratings of customer, a blank screen appears. Everyone knows this or have a way to solve this problem?

  I see even here in Seattle, so I think the question is about the end of Apple.

  By the end of 2012 Mac minis, macOS?  Watch 38 mm silver AL, watchOS 3; iPad 2 Air & iPhone 6 + iOS 10.0.1;  Apple Airport Express

• My e-mail text doesn't display correctly in the preview pane after upgrade to V38

  I upgraded from 32.0 to 38.0 today. After that I upgraded my emails are not displayed correctly. When enamel is reduced in the preview pane, the text appears in a single line and is truncated at the end of the right SIDE of the pane. When enamel is developed in the preview pane is displayed none of the electronic text. If I open the email in a new window, none of the text of the email is displayed. With the 38 version I can't read the email.

  I've downgraded to version 36 and the frozen problem existed. I uninstalled V36 and everything stopped and restarted then installed V32 and all is good again. I don't know what version between 32 and 36 problems began. I would like to get current.

  If anyone can help with this?

  It is rather difficult to diagnose when you uninstalled software.

  I suggest you reinstall it and try safe mode (hold down the SHIFT key while the program starts). This disables modules and there is a good chance that it's an incompatible add-on or theme that is causing.

• v.31: NoScript, initial home page are displayed correctly, but the tabs are not displayed correctly

  I'm under FF with NoScript, never "do not forget history," "Tell sites I don't want to be followed," not selected "Remember passwords for sites" and no Flash. My search engine is Duckduckgo. I use FF for private surfing. If I want to watch the video, I use IE11.

  V.30 with before, I could never see how to configure FF to view my homepage of duckduckgo.com , when I created a new tab. But this is only a minor annoyance because I just click on the Home button.

  Now with v.31, when I create a new tab I see nine rectangles where my story would be represented, if I had not turned off. At the top is a search box with Duckduckgo. However, when I try to use the search box, I see a message 'this page requires JavaScript. Download no - JS here. »

  What is the point of allowing my Duckduckgo home page to display properly when FF is displayed first, but the following tabs require is at the bottom right of the screen and select NoScript "temporarily allow all this page" or by clicking on the Home button? From my point of view, this is not an improvement, just something different to look at.

  I put my home page at https://duckduckgo.com/html/, in other words, the version that FF suggested, but nothing has changed.

  I don't need JavaScript enabled for the new integrated tab page, but it might be because I disabled the search suggestions.

  Here's how to set your new tab to DuckDuckGo page:

  (0) as the first step, copy the full URL in the address bar of the search page. This will stick you to step 3.

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste newtab and make a pause so that the list is filtered

  (3) double-click the preference browser.newtab.url and enter your favorite page:

  • (Default) page thumbnails = > subject: newtab
  • Blank tab = > subject: empty
  • Built-in Firefox homepage = > topic: welcome
  • Any other page = > full URL of the page - paste here

  Press Ctrl + t to open a new tab and check that it worked. Success?

• Can I use a display target on the iMac with a laptop from Microsoft?

  I have Microsoft Laptop and I would like to connect to my iMac 27 inches to use as a screen that I know we can do it with Mac Book but we can do it in the same way with a laptop computer from microsoft?

  Thank you

  Unfortunately, this is not possible. Apple only supports the display mode of the target if you want to use your iMac as external to display for an another Mini DisplayPort or Mac of Thunderbolt.

  Also, note that you would be able to plug a laptop with Mini DisplayPort connector, or Thunderbolt, and two of them are very strange connectors on non-Apple computers.

• After the upgrade to Firefox 6.0.2 first flash content was not displayed, but now the plugin does not load. Firefox plugin check says Flash is obsolete, but I just downloaded it from the Web site.

  After the upgrade to Firefox 6.0.2 first flash content was not displayed, but now the plugin does not load. Firefox plugin check says Flash is obsolete, but I just downloaded it from the Web site.
  Mac OS X 10.7.1
  Firefox 6.0.2
  Flash 10.3.183.7

  The current versions of Firefox are 64-bit on OS X, if you need a 64-bit version of Flash with Firefox 6.0.x or you must start Firefox as a 32-bit application to be able to use a 32-bit version of a plugin.

  1. Closing of Firefox
  2. Launch the Finder and open the Applications folder
  3. Make a right click or Ctrl-click the icon of Firefox.app
  4. Select "Get Info."
  5. Select or deselect the option "open in 32-bit mode".
  6. Close window "Firefox Info"
  7. Restart Firefox

• NVIDIA display drivers and the features of the Tablet

  Hello

  I just bought the M200 and a large external LCD display. I couldn't set the resolution for my external screen in 1680 x 1050 with display drivers that the M200 came with, so I therefore updated the NVIDIA driver to the most recent available on the NVIDIA site. I'm working, but now I can't change the direction of view through all utilities TOSHIBA - this error (translated from Danish): "the parameter is not supported. Open display in Control Panel settings, change your settings and try to change the meaning of the display again. »

  Now I have three questions:
  1. are these on the improved at all display driver? And if not, then what am I doing wrong?

  2. If it is upgraded, then how will I be able to change the direction of view and have a large external screen?

  3. If this isn't somehow possible (what would make me really sad :(), then how can I reinstall the old driver, without having to reinstall everything? I can't find the driver on any one of the shipped CD.

  Can someone help me, please?
  Thank you very much...

  MVH Asger / Denmark

  Hello

  As far as I know the driver on laptop is designed and suitable for this unit.

  This is because as the updated driver. Semblance of original driver can not support this resolution.

  In my opinion, if everything works perfectly with NVIDIA driver, which you can change displays using NVIDIA settings. I don't know exactly, but there must be nView Display Mode option.

  If you want to install the Toshiba display driver you can find on Tools & Utilities CD or you can find a last on http://eu.computers.toshiba-europe.com topic support & downloads. Go to download drivers, and there you can choose the type of product, product and the family series model you have.

  Good bye

• M70-144: need to display properties for the instalation of Linux

  Hello

  I intend to install Linux on my computer laptop m70 and I was wondering what is the exact specification of my laptop screen (horizontal refresh rate, vertical refresh rate, etc.)

  Also - what are th e linux drivers from the ati site works with the ati x 600 chip?

  Hello

  As far as I know this device was shipped with a screen 15.4 "(1280 x 800) TruBrite Wide XGA TFT color display." But the detailed information on the screen, you will find in the user manual.

  All graphics driver: I recommend to use only the graphics driver Toshiba because this driver uses a function of protection due to overheating problems. But if you want to use one other drivers, you can do it at your own risk.
  In addition, the Toshiba doesn't supports Linux because the units are supplied only with the Microsoft Windows operating system.

  Good bye

• Put in regular page of e-mail does not display message in the list messages

  Hello

  I've updated my MacBook Pro at El Capitan and my wife Airbook.

  We both use the classic layout in Mail.

  After the update my Mail shows the message in my message in the message list a list (as it always does) I use this option so I don't have to double-click Mail and open it in a window separate to read.

  On Airbook my wife a message highlighted in the list does not appear in the list. (there is a small circle at the bottom of the list and hovering over him the cursor moves on the symbol to stretch or shrink the window, but it is just not there). She had it works just like mine before moving to El Capitan.

  This thread: Mail (El Capitan): display the preferences

  "says:

  Use Classic layout

  By default, messages are displayed next to the list of messages. To make messages appear below the list of messages (typical configuration), check the box. »

  I'm not sure what this explanation or if she's talking about my problem.
  I have no idea how to get the classic page layout to work the way it did before.
  Can someone help me get mail on the Airbook to redisplay the message highlighted in the list under the list?

  THX
  Brick

  Hello brick,

  Thank you for using communities of Apple Support.

  I see that your wife's Mac shows the display of the message during the classic presentation.  As you can see the small circle at the bottom of the screen, indicating that the screen has been pushed all the way down, eliminating the part look at a message.  Simply click, hold and drag the symbol upwards to bring this part of the Mail window.

  See you soon.

• My iMac cursor is stuck in the upper left corner of the login screen and I can't move it and now I can't use my iMac. What can I do? My iMac is a 27-inch 2014 release (one thin without retina display) and uses the keyboard and wireless mouse.

  My iMac cursor is stuck in the upper left corner of the login screen and I can't move it and now I can't use my iMac. What can I do? My iMac is a 27-inch 2014 release (one thin without retina display) and uses the keyboard and wireless mouse. It runs OSX Mountain Lion (not sure which version) and is a model 27 inches.

  have you tried to change the batteries in the mouse?

• Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power Home). The phone is new (5 days). It's a m

  Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power + Home).

  The phone is new (5 days). It's a wedding?

  If you encounter this flicker, then the next troubleshooting step is to restore from a backup. If the behavior persists after the restore, then the last step is the factory restore. If after the factory restore and adding no additional content, you see always this problem, then you must make an appointment at the Genius Bar to the nearest Apple store or service provider authorized Apple to have the material examined. If the behavior goes after the factory restore, then sync again your content manually, without using the backup. It seems to me it's corrupted content in the backup.

  Restore your device from an iCloud or iTunes backup - Apple Support

  Use iTunes to restore your iPhone, iPad or iPod settings - Apple Support