HP Pavilion Elite HPE-210f: recovery of an original installation of systems

Similar Questions

• HP Pavilion Elite HPE-210f: update video card

  A PNY gtx 950 should physically be in a HP Pavilion Elite HPE-210f? I already know that I have to upgrade the power supply, but before shelling out more money, I figured I would see if anyone knew if the card fits?

  KKingotu, welcome to the forum.

  The problem you will have with the GTX 950 is, it requires UEFI in the motherboard instead of a standard BIOS.  HP didn't start using UEFI until mid-October 2012.  Your computer was released on February 5, 2010.  There is no way to update the UEFI BIOS.  You can contact Technical Support PNY to see if they have a VBIOS update for the video card that will work with your motherboard.

  Meanwhile in the space provided, you can measure e/s rear plate on the front of the computer case to see if any of the components.  In addition, it is a wide double card (two locations).

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Pavilion Elite HPE-170F recovery problem

  I woke up yesterday to a problem of blue screen on my Windows 7 Pavilion Elite HPE-170F.  Following reboot, but would end up the same way.  Tried to boot mode without failure, but same result.  A technician came to the House and he did Diagnostics with its test disc that says the HD had to be replaced.  I had my recovery disks that I made when I bought the computer 4 years, which made her happy.  He installed the new HD and put the old in another location, planning to transfer my files after the restore.  He began the process of recovery with disk 1 and told me to change the disks as needed while he went to see another client.  All done and then it entered into startup mode of windows. went black for a while and then gave me the message "Windows Setup could not configure Windows to run on hardware.  The technician returned and tried other things but the same results.  We ordered a new series of HP recovery disks but will take a week.  The question, since the instructions say to disconnect everything except the monitor, keyboard, and mouse, would be the printer that is wireless a problem and should it be turned off?  Also, the mouse and the keyboard are different than the original, which would be a problem.  In addition, Windows installed several updates of the day before the problem.

  I venture a guess the your computer uses an Intel chipset, can be set to "RAID", and the replacement of the hard disk is a disk AF (Advanced Format). Please see desktop HP - can not recover the PC after replacing the Hard Drive with an AF Drive (Windows 7 and Vista) for more information on this topic. Please see computers HP-HP System Recovery troubleshooting (Windows 7) for more information on the AF drives and some troubleshooting tips.

  Alternatively, if you can still read the Windows product key of 25 characters on the COA Microsoft attached to your computer, you can install Windows 7 using this key. Please see "how to install Windows 7 without the disc" to get instructions on how to download Windows 7, create the installation media and install Windows 7 using the product key 25 character of the COA Microsoft on your computer. Using this method will not install HP customizations or value-added software and you will have to manually install all necessary drivers.

  Windows 7 SP1 can be found HERE and HERE.

   

  Direct link to Windows 7 USB/DVD Download tool.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Hp pavilion elite hpe-570f system recovery question

  I'm having all sorts of problems trying to do a reinstall my hp pavilion elite hpe-570f system. I'm trying to use the recovery partition. I can get to options and don't start the process, no problem. He has even reformat the hard drive. The problem arises when relocation of the factory software. Usually, it hangs at 1% until the screen loses the signal and that's it. I have disconnecged everything - including the usb keyboard and mouse on the last attempt - but the most I ever got was 35% before the screen loses the signal and nothing else happens. I thought that if I left him alone, he would install completely, but this last time I left for almost 4 days and still not install. Advice?

  Given that it was me that pisses off the coast, I purchased a retail version of windows 7 unlimited and tried. The same problem. Bought a new motherboard - and the case since the case of HP is designed to put another issue - and he moved very well. Have not had any problems of video card. It seems therefore that the cause of this whole ordeal was the motherboard.

• Pavilion Elite HPE 450 t PC: desktop computer will not be updated for windows 7 64, Microsoft tried without success.

  I have a PC Pavilion Elite HPE 450 t, and a few months ago he ceased to accept automatic updates from Microsoft downloads.

  I tried to use the tools that Microsoft has nothing helped.

  Some time after, my Norton Security software security suite failed and wouldn't charge.  Norton failed to find a solution.  I guess it must do something with the heavy backlog of unloaded updates.

  ? Is it possible to load windows 10 on win 7?

  I got my PC tested for viruses, root kits and it is clean, but updates are still not loading.

  Honestly, I'd appreciate any help that you folk can provide.  Thanks in advance

  Leon R.

  Hi there @LROSZKOW,

  I hope you find your experience of positive Support Forum! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you have had problems with the updates of Windows and want to know if you can upgrade to Windows 10. I'm happy to help you with this.

  Reading the questions you have described in your current system that you cannot upgrade to Windows 10, using the normal method of free upgrade. Your system should have the option available from a previous update of Windows, as the free update is delivered via Windows update. If you have a Windows 7 or 8.1 product key, then you could do a clean install of Windows 10 and use this key to activate your Windows 10 free documents. Of course, you want to first make a backup of your data.

  Another option would be to try to load the original image from the desktop computer, and then try to update again by using Windows Update. This assumes you have a working recovery partition or recovery media. Computers HP - performing a recovery of system HP (Windows 7)  But to protect your data, you want to make a first backup as I mentioned.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• HP Pavilion Elite HPE - 500f D: SSD replacement for HP Pavilion Elite HPE-500f to original desktop PC hard drive

  Hi all!

  I would like to replace the original hard drive came with my desktop HP Pavilion Elite HPE-500f with an SSD, but when I tried, I got the error message that my SSD drive was not big enough. The original hard drive is 1.35 TB. What size an SSD should be to replace the original CT 1.35 supplied with my HP so that I could use the 1.35 disc as my second drive and the ssd as my main drive?

  Thank you!

  Hello

  Yes I think a 240 GB SSD would be sufficient.  Using the hard drive for storage is a good idea.

  These articles HOWTO HP should be useful.

  You should be able to install the SSD in the existing hard drive cage as it is put into service for three hard drives.  Use a 2.5 "to 3.5" adapter.  You also need a SATA data cable.

  Don't forget to create the external recovery media and backup your data.

• Replace the HARD drive in the new Pavilion Elite HPE-180 t.

  I'm not a professional computer, but after 30 years of use, the upgrade and repair PC home and the office, I'm embarrassed to post this thread - but here goes.  I took delivery of a few days ago the new highest indicated HP computer model in the topic of this thread.  The new computer is beautiful and everything worked perfectly from the start.  I decided after a few days to check, everything was fine and proceeded to a few pieces of hardware to transfer from my old Dell (a fairly new 1 t WD SATA HDD on which coied got a lot of data from the former count and a new BD/DVD ROM SATA optical drive).  Everything was fine once I figured out how to get these two drives in the enclosure waterproof on the new computer, but all reconnecting the SATA cable on the main came with the computer HARD disk, I broke up some pins on the HARD drive that made it of course useless SATA port.  I of course take full responsibility and do not wish to get involved with HP technical support to replace the disc - and frankly, I prefer not to put another HDD Seagate support because I prefer a 1 t Cavier Black SATA WD which I believe is one of the most reliable RESEARCH on the market right now, and I can buy it for around $200 instead of the $400 I uknderstand fresh HP for the same size of Seagate replacement.

  Here's my question, can I just buy a new HDD WD and install it with my own final Win 7 x 64 without the HP recovery disks (they did not come with the new computer, and I had not yet created my own recovery disc).  Frankly I'd rather have a completely clean install of my Win 7 OS without the HP partition and other HP software on the HARD disk.  Is this possible or HP has some sort of identity with their software which must correspond with the BIOS or something like this?  REALLY, I don't want to return the computer to HP to get called into service because I just started a small business that involves a lot of video editing and I can't be without the computer for weeks, while HP is concerned with him (I've read the horror stories about the high cost of the repairs and the long repair time but I do not wish to keep my warranty if possible).

  HP Pavilion Elite HPE-180 t; 2.8 Ghz quad-core Intel i7 CPU; Intel x 58 chip; Win 7 64 bit ultimate OS. 12 G RAM;
  1.8 NVIDIA GeForce GTX-260 G graphics card; HP w2338h HD widescreen LCD monitor

  I have the same PC, only the model number has been changed.  Yes, you can use your own license W7 and install it on another drive or a replacement drive.  You can get the drivers from the HP site web support HPE-180 tfor your PC or other sources.

  Some software manufacturers third HP is very useful, so you might want to consider ordering the HP recovery discs and make a full recovery to factory.

• How to add to my HP Pavilion Elite HPE-590uk Usb 3.0

  Hi does anyone know if I can improve my HP Pavilion Elite HPE-590uk for usb 3.0 and if so could you recommend a product that I could buy to do this.  Thanks in advance.

  One of them check it:

  http://www.overclockers.co.UK/showproduct.php?ProdID=CC-003-AK

  This is to use a pci-e x 1 card. You have 2 these slots available. This will show you how do:

  http://h10032.www1.HP.com/CTG/manual/c02255267.PDF

  See the section on the replacement of a card.

  Instead of plugging on the long black slot which is a video card plug into one of the slots black short. You have Windows 7 I think which means that you will need a driver, but that should come on a CD with the card. Will need you a power connector (molex) on the map, too.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP Pavilion Elite HPE-500f desktop PC

  HP Pavilion Elite HPE-500f desktop PC - I would like to upgrade food, video card and hard drive. Can I use a SATA III hard drive? Can I use a 4 Gig ATI video card? Those are the weak links in this computer in the measurement of performance, Windows 5.1 index. The ram has already been updated to 16G. I would use a hard drive WD Black edition.

  Thank you!

  Jon A. Schoen

  [email protected]

  You can use a SATA-III HDD but the 785G chipset only supports SATA-II. You won't see any difference, and the SATA-III is backward compatible. You have a 300W power supply. You can put in a better and with a minimum 500 or 600 watt PSU, you can install any videocard, pcie 16 x which will be in good physical shape. In retail offices, there is simply not as much space as in a custom build Tower and best video cards these days are huge things two locations. Don't forget, it fits with room to spare, or you will have problems of air circulation.

• Pavilion Elite HPE: Power on password

  I powered up the computer after 4 years of non-use and do not know what the power u [password is? I can reset the motherboard some how? Help, please. I can't find a connecting cable

  You are the very welcome.

  In order to clear the BIOS P/W, please refer to the link below, last position on the page...

  http://support.HP.com/us-en/product/HP-Pavilion-elite-HPE-desktop-PC-series/5035344/model/5036175/document/c02668523/

• Pavilion Elite HPE-170f Deskto: Memory Upgrade

  I have the HP Pavilion Elite HPE-170f desktop.

  Motherboard: Pegatron IPMTB-TK (Truckee)

  Processor: Intel Core i7 CPU 920 @ 2.67 GHz, 2668 Mhz, 4 Lossnay, 8 logical processors

  Storage media: 6 x DDR3

  Memory type: Types DIMM PC3-8500 (DDR3-1066)

  I currently have 8 GB of memory.

  What is the maximum I can install?

  Operating system: win 10 Pro 64-bit

  Thank you

  John

  @jmwright1058

  Memory upgrade information

  • Architecture memory triple channel

  • Six DIMM DDR3 240-pin connectors

  • Supports types DIMM PC3-8500 (DDR3-1066)

  • Memory non - ECC, unbuffered

  • Supports DIMM DDR3 4 GB modules

  • Supports up to 24 GB on 64 bit computers

  • Supports up to 4 GB * on 32-bit computers

• HP Pavilion Elite HPE-495uk for: HP Pavilion Elite HPE-495uk

  HP Pavilion Elite HPE-495uk Desktop Hi there I have the computer following and need to update my graphics card and want something with 2 GB what cards will fit in my system and have I not enough power to power a new 2 GB card? Any help would be great. Soon TV

  Hi there @Tele,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have any questions about the upgrade. I'll be happy to help you.

  The Notebooks of PC HP Pavilion Elite HPE-495uk Desktop, this computer has a slot PCI Express 1 x 16 for the graphics card and a 460 W power.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• HP Pavilion Elite HPE - 532 s: 'Secure Boot Configuration' not found?

  Hello support, I wanted to disable startup secure for my office.
  I have a pavilion Elite HPE - 532 s Bios 7.15 I followed the step of many posts, but I don't have it under the heading "security"?
  I am on window 10 64-bit UEFI.
  I wanted to disable, because I have a new GTX 960 graphics card and it stuck on the HP logo at startup all the time when I use the new card. !!

  I tried to disable the security slot, but no matter what I do I get a black screen for my card both old and new so I have to reset the bios settings.
  Help me please.

  Thanks for the additional information.

  Here is my diagnosis/notice:

  I don't think you'll be able to get the GTX 960 to work with this system.

  Why it won't work in the UEFI/GPT:

  It will not work in the UEFI [I think] 960 GTX is one card of UEFI and you must disable secure boot to make it work. Your BIOS is only "UEFI compatible" originally planned for Windows 7 [which does not support secure boot]. If you are unable to disable the secure startup, you can not use this card.

  Why it won't work in legacy/MBR:

  It won't work in legacy because it's a single card of UEFI.

  My suggestion:

  Return to the legacy/MBR and use a graphics card that has a dual BIOS BIOS/hybrid or one who supports in particular the Legacy BIOS as described in one of my previous posts.

  Some other things to consider:

  You PSU has enough power for this card? I think it takes a minimum of 400W PSU.

  You connect the auxiliary power connector?

  Have you tried to disable "Intergrated Graphics" in the BIOS [as appropriate]

• HP Pavilion Elite HPE-575 has: the graphics card upgrade

  Hi I want to know if a GTX 950 oc 2gbddr5 graphic card is compatible with my HP Pavilion Elite HPE - 575 a pc, if someone can shed some light on this would be very appreciated

  @W1976, welcome to the forum.

  W1976 wrote:
  

  Hi I want to know if a GTX 950 oc 2gbddr5 graphic card is compatible with my HP Pavilion Elite HPE - 575 a pc, if someone can shed some light on this would be very appreciated

  No, the GTX 950 requires UEFI in the motherboard instead of a standard BIOS.  HP didn't start using UEFI until mid-October 2012.  There is no way to update the motherboard in the UEFI.  Latest video cards do not for UEFI were the GTX 660/670.  I suggest that you choose a manufacturer and contact their Technical Support to help them choose the best card for your system.

  You will also need to upgrade the power supply (PSU).  It is only 300W.  Most newer cards require at least 400W to work properly.  Although status map specifications at least 300 w, members reported that they had at least to 400W.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP Pavilion Elite HPE-035sc: msi iona 1.0 ms-7613 can handle a gtx 750ti?

  Hi I have a

  HP Pavilion Elite HPE-035sc desktop PC i7 870 2.9 ghz 8 GB ram

  Serial number: [personal information]
  
  Product number: VS311AA

  BIOS: american megatrends Inc. 5.13, 03/03/2010

  BIOS mode: legacy

  OEM power 460w

  I would like to know if the motherboard can support the gpu or not

  Please answer as soon as possible

  Thank you < 3

  Greetings,

  750ti GTX requires BIOS version 8.xx.

  This card to initialize not due to lack of UEFI support in the BIOS.

  Discover the Nvidia 600 series graphics cards as they will run on a legacy PC BIOS. The 600 series cards can run on a PCIex16 Gen1 slot. I have not checked this.

  I've seen information indicating that some AMD manufacturers ship AMD cards with the ability to switch between legacy and UEFI BIOS.

  Check out it at Sapphire Tech.

  So these four cards do not work when it is combined with adequate food on a legacy BIOS PC with a PCIE x 16 Gen2 slot.

  The PC can have only one slot PCIex16 Gen1. The cards are not compatible in this case.

  You will need to check the prospective: graphics card power and the dimensions of upgrade to check both will fit your turn.  We must also find a graphics card that runs on a slot PCIex16 Gen1.

  See you soon!