HP Pavilion Elite HPE-270e cannot update the bios

Similar Questions

• Portege R600 - cannot update the BIOS using Win server 2008

  Hi all.

  Pls help...

  I tried to update my bios to the new version, but I can't.

  I just downloaded bios update of the toshiba site for portage r600 for my model number (bios update 1.80 - winner), I unzip the zip, run the exe, but error popup came:

  Package for the TOSHIBA BIOS ver.3.2.9
  Unsupported product type is installed.
  Package BIOS BIOS Version: Ver.1.80
  Current BIOS version: Ver.1.40

  So my question is what am I doing wrong? I'm trying to update my bios from windows.

  is my version of windows: windows server 2008 Enterprise Edition x 64 SP1 (don't ask why, I just have to run Server 2008)

  Thank you.

  Hello

  Your OS windows seems not to be the Windows which was preinstalled on your Portege
  You cannot update the BIOS by using the windows server 2008 Enterprise Edition x 64

  You will need to put the system which has been pre-installed by Toshiba

  Good bye

• HP pavilion elite hpe 500cs: stuck at the start-up screen

  Hello
  I bought gtx 1060 to my hp pavilion elite hpe 500cs pc, but I can't front the start screen (cannot even get into the bios settings). I inherited bios with the latest version 7.15 which is avalible for my motherboard. The card worked on power and different Mr. b. is sufficient. I also have 1 beep, that the long break and followed 3 short and fast beeps long beep.

  Any ideas?

  Your comparison of different systems and not being is not specific about the other tested machine.  It is like comparing a Citroën with a Renault. (Could not stop myself, realizing your in CS).  The HPE 500cs, as you say, is Legacy BIOS.  The new GTX 1060 is UEFI and would not work in the HPE without a hybrid BIOS from the manufacturer of the card.

• Why my HP Pavilion Elite HPE keep turning to the?

  I have a HP Pavilion Elite HPE-510y... Product number... BV538AA #ABA.

  and it's running windows 7 Edition family... 64 bit

  and he died at different times and in different programs...

  Why does do this and how can I stop it from happening?

  Thanks for any help

  neeha59

  As the unit is still under warranty, I suggest you only to contact HP for service.

• Portege R700 - cannot update the BIOS

  Hello
  I recently bought a Portege R700 19 M and I downloaded the latest BIOS version available in the Toshiba support page and when I run the .exe file, it does not work with this message: "the computer is not supported.
  And when I look in the HWSetup Toshiba tool, it does not display the BIOS version but some weird characters (letters not usual) so I can't find out which version is installed.
  Thank you for your help

  Hey Buddy,

  You update the BIOS to the version preinstalled Windows from Toshiba?
  Are you logged on as administrator when you try the update?

  To be honest I doubt a problem to update the BIOS because I found other threads where users report that BIOS update was successful.

• Tecra M3 PTM30E - cannot update the BIOS

  Hello

  I can't install my new Bios on the Tecra M3 PTM30E-09X01LEN system.
  The message says: not supported.

  Why?

  I put t he understand.

  Hello

  First of all, I want to ask you why you want to update the BIOS?
  You have some problems with the laptop that could be solved by the BIOS updated?

  Also what BIOS you use and where did you find and download?

  The Tecra M3 PTM30E seems to be a European model and the BIOS must be placed on the European driver Toshiba page.

  I checked the page and there are two versions of the BIOS;
  BIOS 1.20 - WIN-FBCF is only for the models with filter virtual control of Angle (FBCF)
  The BIOS 1.50 - WIN is for models WITHOUT filter the virtual control of Angle (FBCF)

  Seems that you used the wrong BIOS!

• Qosmio G30 PQG31E - no driver XP 32? Cannot update the BIOS?

  As usual, obtained a computer laptop, but no recovery CD :(

  Got 32 installed XP (my Microsoft contract does not MCE) but a lot of missing drivers. Driver Toshiba page has all the drivers for XP MCE, XP 32 has only BIOS update, Bluetooth, HD - DVD firmwares, the virtual sound and drivers WI - FI!

  So I tought "Vista on this issue", but I checked the compatibility XP with Vista DVD I got a 'need to update the BIOS' (always a 1.40-2006/03/10)!
  My problem is that BIOS update always returns "this computer is not supported! Laptop has only one account, this isn't permissions problem, perhaps because many drivers are not present? Can I update the BIOS in safe mode?

  What now? Am stuck with a brick of Qosmio? Without controllers LAN to say the least, I can't not fact! Drivers XP MCE does work on XP 32?

  Any thoughts?

  Hello

  I found all the Win XP drivers for Qosmio G30 PQG31E!
  On the European driver Toshiba page, you can find the Win XP MCE drivers
  XP MCE drivers are the same drivers for Win XP Home or Pro.

  There are also some BIOS 3, 90-WIN and this BIOS is operating system independent. In other words, it works with Win XP and Vista...

  To update the BIOS the common Module must be installed
  You can find also on the European driver Toshiba page!

• T420 BIOS 1.34 cannot update the BIOS

  Hello

  I am running UEFI BIOS 1.34 (ECP 1.11). Lenovo is delivered 1.37. I burned a CD with 1.37 to update my BIOS, but the utility tells me that an update is useless. I want to update the BIOS, because I have problems during startup when I connected USB devices.

  Anyone know a good solution?

  Thank you.

  I would like to download the BIOS and burn another CD and try again.

• E6510 - cannot update the BIOS

  I need to update my Latitude E6510 BIOS patch A01.1 new. When I run the updater it starts, restart the portable computer but nothing happens. The BIOS is always on A01.  I can't launch the BIOS A02. Why does this work? Y at - it a way for the patch to work.

  NOTE: I'm sure this is the right file. My service tag to select downloads.

  BIOS A03 fixes this issue. Can now update the BIOS in Windows 7 64 bit.

• Satellite A300D-125 - cannot update the BIOS

  Failure of the update of the BIOS for Toshiba Satellite A300D - 125 PSAK4E (2, 80-WIN32 to 3.10 - WIN32).
  The source that I tried to level is 30/04/09 dated dated http://eu.computers.toshiba-europe.com/innovation/tracker.jsp?file=http%3a%2f%2fsupport1.toshiba-tro.de%2ftedd-files2%2f0%2fbios-20090430094605.zip

  Screenshot available for more information futrher.
  http://img12.imageshack.us/img12/6567/biosupdatefail.jpg

  Please help thanks.

  Also can someone tell me what's new in 3.10?

  Hey Buddy,

  For your model laptop is not a BIOS version 3.10.

  If you are looking for on the site of Toshiba Satellite A300D and PSAK4E model number, you can download the version 2.80.
  Version 3.10 is for other A300D models!

  You can check this on the Toshiba site and then stop to update BIOS please. You can destroy the ROM module

• Tecra M3 - cannot update the BIOS

  Hello

  I have a Tecra M3 (PTM30E) and TEMPRO says they are 2 updates of bios for the computer.
  I downloaded, but when I run it I tells me that the computer is not supported. How to upgrade the BIOS?

  Best wishes

  Michael

  Why in the hell do you need a BIOS update?
  Only because the Tempro said that there is a new update?

  TEMPRO sends only a notification that a new file has been downloaded
  It s not a recommendation that you have so far!

  So if your laptop runs without problem don't update anything!

  I always took this advice; never change a running system! And it of really wise counsel

  Welcome them

• Satellite A500 - cannot update the BIOS (error message)

  Hello

  I have a PSAR3A - 02U002 Satellite A500 with BIOS version 1.9 is installed.

  After reading several forums, I discovered that there may be a BIOS (v2.0) update available to resolve the current problem, these Satellites have with overheating cooling switch down.

  Excited, I have tried to install the new BIOS - this is what I get:

  "There is an error occurred, please check below the elements."
  BIOS version more than 200.
  Battery capacity more than 10%.
  AC is fixed. »

  First of all, my BIOS version is 190, no more than 200. Second, I find it very difficult to believe that the battery must be less than 10%. And third, I don't see what that remove the power supply cable will do.

  Please note that this update of the BIOS found on Toshiba's European website, but v2.0 claims to be a worldwide release. I then checked on the Australian site and there is no BIOS for my model. I don't know how to interpret this contradiction.

  Help, please!

  Hi umm_excuse_me,

  So I think that BIOS update is not available at this time for you. European and Australian models have different model numbers, so I doubt that the update of the BIOS is always the same. The pieces of equipment may also be different.

  In your case, I would wait until the BIOS was released on the page Australian too.

  By the way: where did you read that this update was release in the world?

• Product: HP Pavilion Notebook-PC G7, cannot access the bios settings/turn off the keys f1 - f12, please help!

  I got this laptop PC in 2012, it is a series of G7, I'm pretty sure. My problem is that when I turn the computer off and turn it back on, there is no option to open the menu of the bios (esc) or any option besides. Just a symble blue HP directly in the middle of the screen with a symbol of little loading below him. I pressed ESC, f1 - f10 and virtually all other keys to try to access it. What I really want to do is to disable most annoying f1 - f12 function keys.

  I'm no longer under warranty and my operating system is Windows 8.  There is also no error at all, just no response what that's right don't charge up to login password screen.

  Please help and contribution is appreciated.

  Hi 2livewire4,

  Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I see that you are looking to access the BIOS of your laptop Pavilion. You can't access BIOS in the same way on Windows 8, because you have a faction of a second to get the right timing because of the quick loading of Windows 8 feature. This third party link will show you how to access the UEFI that will lead to the BIOS. You can also do it from the Windows 8 login screen as this Microsoft link will show. Here is a document from HP support disable the function on some models Fn key combination +.

  Thank you

• DCC - cannot update the BIOS via command line settings

  I'm script an automated installation of Bitlocker on Windows 7 and 8.1 systems (company).  I use the last DCC and programs CCTK that came with it.  Systems have the latest BIOS updates, and are fully patched.

  I managed with several test systems (Win7, desktop computers, laptop computers (different models)).  I tried my scripts this morning on a laptop computer Win8.1 (Dell E6330) and as soon as my script runs to the addition of the password of the BIOS needed to make TPM changes ("cctk - setuppwd =" "") I get the following error:

  The required BIOS interfaces is not found on this system.

  I get the same error when running any other command CCTK used in my script:
  CCTK - tpm =-valsetuppwd =
  Activate CCTK - tpmactivation = - valsetuppwd =

  When I restart in the BIOS, no password has been set (all parameters are say no 'set') and the secure platform module is inactive.

  I updated to the latest BIOS (A14) and I get the above error message.  I know that orders CCTK I have scripted are correct, because they work on other systems.

  I wonder what could be the problem with this notebook and how I can come up with a solution.

  Thoughts?  Suggestions?

  Thank you!

  -Greg

  Just a quick update to let everyone know how I solved this:

  I had to install HAPI.

  On all other facilities that I have tested, just have the HAPI subfolder in the folder where CCTK. EXE was hosted was sufficient for work.  But for some reason some, in this case, once I installed HAPI and then ran my scripts again, they finished without a problem.

  I hope this helps someone else.  Seemed to be a solution simply absurd, but it is what it is.

• Desktop PC HP Pavilion Elite HPE-410it - upgrade with the USB 3.0 card

  I want to add a 4xUSB3.0 to my pc card, using a PCI Express x 1 connector; the card has a molex connector 4 pins to the power supply.

  The problem is that on the cables coming out of the power supply unit I have not free connectors, except a connector 6-pin female designed for a graphics card.  I can't find any commercial cable to connect the female connector 6 pin mentioned the molex 4 pin of the card.

  Can you help me please?

  Hello

  You will need to tap into an existing SATA power connector, either go to an optical drive or a hard drive.

  This adapter should work.