Product: HP Pavilion Notebook-PC G7, cannot access the bios settings/turn off the keys f1 - f12, please help!
I got this laptop PC in 2012, it is a series of G7, I'm pretty sure. My problem is that when I turn the computer off and turn it back on, there is no option to open the menu of the bios (esc) or any option besides. Just a symble blue HP directly in the middle of the screen with a symbol of little loading below him. I pressed ESC, f1 - f10 and virtually all other keys to try to access it. What I really want to do is to disable most annoying f1 - f12 function keys.
I'm no longer under warranty and my operating system is Windows 8. There is also no error at all, just no response what that's right don't charge up to login password screen.
Please help and contribution is appreciated.
Hi 2livewire4,
Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.
I see that you are looking to access the BIOS of your laptop Pavilion. You can't access BIOS in the same way on Windows 8, because you have a faction of a second to get the right timing because of the quick loading of Windows 8 feature. This third party link will show you how to access the UEFI that will lead to the BIOS. You can also do it from the Windows 8 login screen as this Microsoft link will show. Here is a document from HP support disable the function on some models Fn key combination +.
Thank you
Tags: Notebooks
Similar Questions
-
Hi, can I have Adobe CC Installer offline all the product? One of my PC cannot access the internet. Please give the link to download?
Please see Adobe CC 2015 Direct Download Links: Creative Cloud 2015 Release | ProDesignTools. Read the very important instructions before downloading the product.
This will download only the versions of Basic. For updates, please visit all updates of Adobe CC 2015: Direct Download links for Windows | ProDesignTools for Windows or , updates all Adobe CC 2015: the Direct links to download for Mac OS | ProDesignTools for Mac.
Concerning
Hervé Khare
-
KB3035583 failed - cannot access control panel or turn off PC
Because today, I'm not able to access control panel or turn off my PC Windows8.
I checked the software updates, and I see that the KB3035583 update failed last night. If windows 10 update I don't want installed nor am I eligible for it. However, this update failed meant now I can not access PC settings, control panel or turn off my PC. Also I am not able to run any command as an administrator because it tells me that I don't have that even if I am sure that this feature is enabled, and it's my PC denied access. I also tried restore but even that does not work.
Advice please?
Hello
See if this helps you:
"How Fix and PC Restore settings and"PC settings"in Windows 8.1"
http://www.eightforums.com/tutorials/42001-PC-settings-fix-restore-Windows-8-1-a.html
Information
This tutorial will show you how to restore the PC settings on applications screen and set the 'Change PC settings' link in the charm of settings (+ I) in Windows 8.1 and Windows RT 8.1.You must be logged in as an administrator to be able to do the steps in this tutorial.
_____________________________________________
If this isn't the case, follow these steps.
«Use the System File Checker tool to repair missing or corrupted system files»
http://Support2.Microsoft.com/kb/929833?WA=wsignin1.0#manually repair
_________________________________________________
And these eightforums.com tutorials are very detailed for the problems resulting from Scan SFC:
"How to run the command" SFC/scannow"at the start or in Windows 8 and 8.1" . "
http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html
Read it in conjunction with the rest of the information they give link above.
Note
If SFC could not fix something, then run the new command to see if it can be able to next time. Sometimes, it can take by running the sfc/scannow command 3 times restart the PC after each time completely fix everything what he is capable of.
If not, then run the Dism/online/Cleanup-Image /RestoreHealth command to repair damage to the component store,
Repair-WindowsImage-online - CheckHealth
Repair-WindowsImage-online - ScanHealth
Repair-WindowsImage-online - RestoreHealth
Restart the PC afterwards, and then retry the command sfc/scannow .
If still no, then try using ONE OPTION above to run the command sfc/scannow at the start
If still no, then you could do a Refresh of Windows 8, or run a System Restore using a restore point dated before the wrong file occurred to fix. You may need to repeat doing a restore of the system until you find a restore point that is older that may work.
If not yet, then you can use the steps in the TIP box in the section THREE OPTION to manually replace the files SFC could not fix.
__________________________________________________
"How to update windows 8 and 8.1" . "
http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html
Refresh your PC goes like this:
- The PC starts in Windows RE (Recovery Eenvironment).
- Windows RE scans the hard drive for your data, settings, and applications and puts them aside (on the same drive).
- Windows RE installs a new copy of Windows.
- Windows RE restores the data, settings, and applications, which it set aside in the newly installed copy of Windows.
- The PC reboots into the newly installed copy of Windows.
_________________________________________________
"How to reset Windows 8 and Windows 8.1" . "
http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html
"When you reboot your PC, the drive will be completely reset and all your applications and your files will be removed it." Windows 8 will be reinstalled, and you need to change any settings, and then reinstall all the apps you want to come back after the reset. If you know if all the files you don't want to lose, then you must back up these files before you start resetting.
See you soon.
-
Dear, HP Support,.
I upgraded the os to my laptop HP Pavilion 15-n259tx windows 8.1(in-built) Windows 10 a few days ago. Win 10 works well. But yesterday, I noticed that there is no software for my graph RAEDON AMD (TM) HD 8670 M. card so I open the AMD website, find my graphics card software and install it. But at the end of installation, I noticed that the brightness of my screen become maximum. And I can't control it by the default keys f2 / f3. After that keys, no effect takes place. Today, I uninstalled this driver AMD RAEDON (TM). But still the problem persists. Help, please.
Hi @Ananyo ,
Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion Notebook 15-n259tx and problems with the brightness. You can try to use theWindows Update Troubleshooter to fix updates that do not come through Windows 10. Please restart the laptop twice to make sure that all updates are completed!Here is a document that shows how update the drivers that do not work correctly with Windows 10.
Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that may need updating.
I hope this helps.
Thank you.
-
HP Pavilion Notebook 17.3 ": cannot use the buttons and moving the mouse
Hello
I'm a pretty heavy gamer and I recently I brought a HP Pavilion Notebook with windows 10 on it, and I expect to play games on it
But the problem im getting is, if I hold one button, the mouse does not work, which, as you can tell, is unplayable.
Is there any solution to this? his v19.0.12.97 of Synaptics Pointing Device running
Thanks in advance
Hello
I tried the following on a machine not that different to yours and it seems to work.
First, download the Synaptics driver on the link below and save it in your downloads folder.
http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63417.exe
Disable your wireless card (should be f12).
Open Control Panel, open programs and features, right click on the Synaptics driver and select uninstall.
When you are done, reboot the laptop.
When windows has reloaded, open your Downloads folder and launch the installer of Synaptics - when this is complete, restart the computer again.
Open the Synaptics settings panel, disable SmartSense, then check if the touchpad works now with a key on the keyboard is pressed.
If so, turn on your wireless card and use the utility on the following link to prevent Windows 10 to update automatically the Synaptics driver.
https://support.Microsoft.com/en-GB/KB/3073930
Kind regards
DP - K
-
Pavilion G7: Desktop Applications cannot access the Internet but metro apps can
I have a Windows 8.1. About 5 days ago from desktop applications (IE, Chrome, Google Drive Office) has ceased to be able to access the Internet at all.
However, apps of metro (metro IE, Facebook, Mail, etc.) can still access the Internet.
How could it happen? That the two environments use different settings? Is there a setting or registry entry that applies only to the desktop environment?
Analyses of viruses and malicious software (Malwarebytes and Windows Defender respectively) were not able to do what anyone. But since they are two desktop applications they have not been able to update their files of signatures since this problem started.
I found the answer on the Microsoft site on this topic.
The answer is to reset Winsock using this command from an administrator command prompt: "netsh winsock reset" and then restart.
I did and that fixes the problem immediately.
-
It works through the Assistant/Installer together and said so at the end he cannot access/find the key. Don't know what to do. Thank you!
update by downloading the files directly and then apply them: http://www.adobe.com/downloads/updates/
-
Subselect cannot access the key-Select columns?
Dear experts!
First of all, I had a pretty simple statement
SELECT FPS_Main.NACHNAME, FPS_Main.VORNAME, FPG_Main.NAME AS 'Department', FPS_Main.DK_ORGA_BEREICH AS "Orgabereich d. pers.", FPG_Main.DK_ORGA_BEREICH AS "Orgabereich der ABT."
FPS_Main, GJ FPG_Main FPS
WHERE FPS_Main.FK_FPG_NR = FPG_Main.PK_FPG_NR
AND FPS_Main.DK_ORGA_BEREICH = 'AL '.
AND FPG_Main.DK_ORGA_BEREICH = 'MZ '.
ORDER BY FPS_Main.NACHNAME
which produces a table like this:
First name * first name * Department * organizational field of person * organizational area of the Department
...
I want to add two columns to the statement, the first listing the number of publications of each person for 2008, the second list the number of publications of each person for 2009. I tried to do it like that
SELECT "Orgabereich der Abteilung", Sub1.Anzahl_2008, Sub2.Anzahl_2009, FPS_Main.NACHNAME, FPS_Main.VORNAME, FPG_Main.NAME AS 'Department', FPS_Main.DK_ORGA_BEREICH AS "Orgabereich d. pers.", FPG_Main.DK_ORGA_BEREICH
FPS_Main, GJ FPG_Main, FPS)
SELECT COUNT (FPB_Sub1.FK_FPR_NR) AS Anzahl_2008
OF THE FPB_Sub1 ASRD, FPR_Sub1, FPN_Sub1 of the RPF, of FPR FPS FPS_Sub1
WHERE FPB_Sub1.FK_FPR_NR = FPR_Sub1.PK_FPR_NR
AND FPB_Sub1.FK_FPN_NR = FPN_Sub1.PK_FPN_NR
AND FPR_Sub1.FK_FPS_NR = FPS_Main.PK_FPS_NR
AND FPN_Sub1.PUBLIKATION_JAHR = 2008
) Sousrepertoire1
(
SELECT COUNT (FPB_Sub2.FK_FPR_NR) AS Anzahl_2009
OF THE FPB_Sub2 ASRD, FPR_Sub2, FPN_Sub2 of the RPF, of FPR FPS FPS_Sub2
WHERE FPB_Sub2.FK_FPR_NR = FPR_Sub2.PK_FPR_NR
AND FPB_Sub2.FK_FPN_NR = FPN_Sub2.PK_FPN_NR
AND FPR_Sub2.FK_FPS_NR = FPS_Main.PK_FPS_NR
AND FPN_Sub2.PUBLIKATION_JAHR = 2009
) Sub2
WHERE FPS_Main.FK_FPG_NR = FPG_Main.PK_FPG_NR
AND FPS_Main.DK_ORGA_BEREICH = 'AL '.
AND FPG_Main.DK_ORGA_BEREICH = 'MZ '.
ORDER BY FPS_Main.NACHNAME
using twice the same statement of subselect tabular, but with alias names. But gives me an ORA-00904 - identifier not valid. What I've done wrong, and how I can fix?
Then I tried like this, with one column first
SELECT FPS_Main.NACHNAME, FPS_Main.VORNAME, FPG_Main.NAME AS 'Department', FPS_Main.DK_ORGA_BEREICH AS "Orgabereich d. pers.", FPG_Main.DK_ORGA_BEREICH AS "Orgabereich der Abteilung", COUNT)
SELECT FPB_Sub1.FK_FPR_NR
THE ASRD FPB_Sub1, RPF FPR_Sub1, NPF FPN_Sub1
WHERE FPB_Sub1.FK_FPR_NR = FPR_Sub1.PK_FPR_NR
AND FPB_Sub1.FK_FPN_NR = FPN_Sub1.PK_FPN_NR
AND FPR_Sub1.FK_FPS_NR = FPS_Main.PK_FPS_NR
AND FPN_Sub1.PUBLIKATION_JAHR = 2008
)
FPS_Main, GJ FPG_Main FPS
WHERE FPS_Main.FK_FPG_NR = FPG_Main.PK_FPG_NR
AND FPS_Main.DK_ORGA_BEREICH = 'AL '.
AND FPG_Main.DK_ORGA_BEREICH = 'MZ '.
ORDER BY FPS_Main.NACHNAME
give me an ORA-00936 - lack of expression. I never tried to use a (sub) - SELECT within an aggregate function, but I have seen somewhere else and thought it might be a good idea for this case, but seems its does not work - what is wrong here?
I thank very you much in advance!
With sincere friendships.
ChrissYou need a pair of Klammern around your subselect:
SELECT FPS_Main.NACHNAME, FPS_Main.VORNAME, FPG_Main.NAME AS "Abteilung", FPS_Main.DK_ORGA_BEREICH AS "Orgabereich d. Pers.", FPG_Main.DK_ORGA_BEREICH AS "Orgabereich der Abt.", COUNT((SELECT FPB_Sub1.FK_FPR_NR FROM FPB FPB_Sub1, FPR FPR_Sub1, FPN FPN_Sub1 WHERE FPB_Sub1.FK_FPR_NR = FPR_Sub1.PK_FPR_NR AND FPB_Sub1.FK_FPN_NR = FPN_Sub1.PK_FPN_NR AND FPR_Sub1.FK_FPS_NR = FPS_Main.PK_FPS_NR AND FPN_Sub1.PUBLIKATION_JAHR = 2008)) FROM FPS FPS_Main, FPG FPG_Main WHERE FPS_Main.FK_FPG_NR = FPG_Main.PK_FPG_NR AND FPS_Main.DK_ORGA_BEREICH = 'AL' AND FPG_Main.DK_ORGA_BEREICH = 'MZ' ORDER BY FPS_Main.NACHNAME
URS
-
I performed an update custom Vista Ulitmate Windows 7 64 32, before to do it, I had all 20 to 23 GB of free space on my C at all times, now, after the update I Go 14.3 left and I don't the have not even re-installed one of my settings, or any software.
such as word/excell/adobe suite.
There is nothing on my computer but undesirable, gadgets and games, and there is no space left. How can this be?
I read that Windows 7 makes your computer faster and better, work how in the heck he will do that, I can't even use my computer because I can not re - install my stuff.
Windows 7 ultimate me blocks to remove gadgets and the sidebar, I removed all these on my vista so I could install and use my suite of adobe for school
I'm panicking, I chose to do this on the weekend, so it would not interfere with my school and work, but now I can't do anything. I tried to call Microsoft, but they have no help available
Please someone help me?
Thank you
Gina
I performed an update custom Vista Ulitmate Windows 7 64 32, before to do it, I had all 20 to 23 GB of free space on my C at all times, now, after the update I Go 14.3 left and I don't the have not even re-installed one of my settings, or any software.
Free space - increase the hard disk space
The following procedure cleans the files associated with your user account. You can also use Disk Cleanup to clean all the files on your computer.
1. click the button start, in the search box, type disk cleanup, then click Disk Cleanup.
2. in the drives list, click the drive you want to clean, and then click OK.
3. on the Disk Cleanup tab, select the types of files to delete.
Note: To delete all Points except the most recent system restore - click on "Clean up System Files" and you will get another tab called more than Options. Now click More Options, and then click 'Clean up' under ' System Restore and shadow copies "and then confirm the deletion.
4. click OK at the bottom of the window cleaning disc and in the message that appears, click on delete files.Reduce the amount of space allocated to system restore.
1. start--> panel--> system and safety--> system
2. then click on the "System Protection" link located at the top left.
3. in "System Properties" window, click on the "System Protection" tab
4 locate the 'Settings of Protection' box and select / click on the drive letter (usually c :))
5. now, click the "Configure" button to change the settings to restore "disk space".
6. move the cursor to reduce the amount of space system Protection can use (min. 2 GB).
7. click "Apply" and then the "OK" button after setting the disk space.If you have a huge amount of RAM the pagefile and hibernation can occupy a large amount of disk space. 6 GB of RAM can cause 12 GB of space to be resumed by using the default settings of Windows.
1 put the hibernation - note: you will not be able to sleep extended
A. click on start
B. Select all programs--> accessories
C. right click on CMD.exe and select run as administrator
D. at the prompt, type how: powercfg-h off
E. press ENTER, then exit CMD. You may need to restart2. reduce the size of swap file
A. open Control Panel and select system and security.
B. click on system
C. click on advanced system settings.
D. click on the Advanced tab.
E. in the performance section click on settings.
F. click on advanced and select change in the virtual memory section.
G. uncheck automatically manage Pagefile size
H. Select custom and
I. enter a new amount. Enter the same number in both boxes. Minimum: 1 GB (or 1024MB).
I. click on set, then OK.
J. restart your computerDelete Windows.old on your C: drive
Usually, but not always, after installation of Windows 7 you have a Windows.old folder on your C: drive that contains your files and data from the previous installation of Windows and allows you to go back to a previous version of Windows. Open Windows Explorer and under 'Computer' click the C: drive - if the Windows.old folder is on your hard drive, it will contain all of your files to the Windows system, and it can be removed if you do not need to free up space on your hard drive.
If she's not here, make sure you can see the Windows.old folder:
1. click on start, type: hidden
2. click on 'display the hidden files and folders '.
3. Click to select "show the hidden files and folders".
4. click OK and look for the folder
(Note: when you go back and uncheck the "Show files and folders")How can I remove the Windows.old folder?
http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-the-Windows-old-folderIf the Windows.old folder does not remove:
In Windows Explorer, you should see a folder called Windows.old on your C: drive. That contains all of your files from your previous installation. If you need all the files, you can copy them to another folder and then delete Windows.old. If you do not need anything in the folder, it is safe to delete.Questions about installing Windows 7?
FAQ - Frequently Asked Questions from Installation Windows 7 & responses -
The system also allow me to actually TALK to someone at Adobe, which is what I want to do.
Linda, check please I sent you a private message.
-
Cannot mark the answers as useful - please help
Dear Mods/Admins,
Firstly my apologies for the creation of a discussion to the question where the solution is already given.
I can't mark as USEFUL responses to my thread https://forums.oracle.com/thread/2559964.
As I can't see the useful option of brand because it.
Could if it you please mark it as a question? or let me know what to do on my end. While creating, I marked the thread as question and few answers have been marked as useful as well, but after editing, I'm not able to find this option.
Thanks in advance for your support.
See you soon!
Billon
Hi Bhaskar,
Wire SOA/OSB - a few interview questions: Please help
is already marked as a question, and I see that already two answers are marked as useful. There is a limitation in the forums up to two answers can be marked as helpful by discussion.
So I think, you won't be able to mark the third reply as useful.
However, you can mark it as correct, but it is up to you.
Thank you
Varun
-
Cannot access the windows installer
try to install itunes and other windows updates and I get error 643 on updates and cannot access the windows with itunes installation programs. Is there something blocking these files that they do not work
try to install itunes and other windows updates and I get error 643 on updates and cannot access the windows with itunes installation programs. Is there something blocking these files that they do not work
RE: Windows updates :
You should be psoting in section updates from Windows:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threadsHere's the tutorial for number 643.
Have a look while you wait for answers from the section updates to Windows.Windows Update error 80070643
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643Re: Itunes
You wrote. .. Cannot access windows with itunes installation programs.
The Windows Installer Service could not be accessed
http://www.Winhelponline.com/blog/Vista-the-Windows-Installer-service-could-not-be-accessed/Questions about Apple products will be better displayed on the Apple forums.
It is where are the experts itunes and quicktime.
Apple Discussion: Category: itunes
http://discussions.Apple.com/category.jspa?categoryID=149Discussion of Apple - installation abd update itunes for Windows
http://discussions.Apple.com/forum.jspa?forumid=792Problem installing itunes or quicktime for Windows
http://support.Apple.com/kb/HT1926Uninstall and reinstall itunes and quicktime
http://support.Apple.com/kb/HT1923For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.
-
Hello
I have a problem with my computer it has been infected by a virus that is not visible in normal mode. It prevents running any application that would help in the detection and removal. I tried running mrt, mcaffe, trendmicro rootkit detector rootkit detector, spybotSD, analysis windows Defender online Windows live onecar. All these works for a minute and then shutsdown, when I click it again I get the error, as mentioned in the title, 'windows cannot access the specified device file or the path, you do not have permissions.
This problem has a solution or re - install is the only way out?
The pointers/help appreciated.
Just to add, I am able to connect using my last known good configuration and only safe mode configurations.
Thank you
Id2View,
1. follow all the instructions in this thread: How to get rid of malware
2. If still no joy you can find Microsoft MVPs and other trained analysts on the following support sites:
Aumha.org
Atribune.org
SpywareHammer
BleepingComputer
Safer-Networking3. If you need help with virus-related issues, contact the Support Services Microsoft product.
To support the Canada and the United States, call toll-free (866) PCSAFETY (727-2338).
For support outside the United States and the Canada, visit the page Web of Product Support Services.
4. If you need more assistance for the position of the newsgroup Microsoft - security - virusvirus/worm.
Through your News Reader:
News://msnews.Microsoft.com/Microsoft.public.Security.virus
Via the Web:
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Security.virusHope this helps,
Vincenzo Di Russo - Microsoft MVP Windows Internet Explorer, Windows Desktop Experience & security - since 2003. ~ ~ ~ My MVP profile: https://mvp.support.microsoft.com/profile/Vincenzo
-
When I start windows Vista, I get the error message:
RunDLL
Error loading C:\windows\system32\sshnas.dllThe process cannot access the file because it is being used by another process.
How can I fix?
Hello
It is the result of malware, then do a very thorough check and when the system is
clean see the following message to remove this error.If you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be more difficult to detect as the
cause.No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is clean.It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/products/malwarebytes_freeRun the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
here or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp?prevx=Y <-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
-----------------------------------
Original version is now replaced by the Microsoft Safety Scanner
http://OneCare.live.com/site/en-us/default.htmMicrosoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx----------------------------------
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
system files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Hi I encounter an error message "Windows cannot access the specified device, path or file. You don't have appropriate permissions to access. »
The error message every time I click on administrative tools of the window (including the Control Panel, windows update, the Windows Explorer, etc.) but without impact on other programs I have.
I rebooted in safe mode and discover that everything works fine (no error message will appear when you click on window management tools).
I proceed to do a clean boot-> first disable all services of third parties (message yet to come), and then clear the components of the service windows (message yet to come)
I tried to type "explorer.exe" in the start menu-> search field then click right highlight to run with administrative rights, then received another message of error "Server execution failed".
I am the administrator account on this PC - and have full access.
The error seems to have appeared on 11 August after Windows Update the following:
Update of security for Microsoft Windows (KB2536276, 2556532 2559049, 2560656, 2563894, 2567680), and
Update for Microsoft Windows KB2563227
A security update for the Microsoft.net framework 4 client profile (verson 1)
There is no installation of any software or updates outside the windows update.
I also tried to restore the windows before August 10, 2011, but that did nothing.
As the error prevents me to access any object Admin window - I'm unable to retrieve the product ID and write to Microsoft Tech and ask for help.
I hope some of you can offer the suggestion of possible solutions (I really want to re - install window 7 and other software, I'm sure).
Thank you.
My solution works in about 2 minutes, it's a very weird error and only happened to 3 jobs in the last 3 years, this solution does not need to create another account if local administrator is active and allows access to the corrupt user documents ect.
Log in as the local administrator or a domain administrator
If the local administrator is not activated refer to http://support.microsoft.com/kb/555910 and after completing these newspapers of steps on the local administrator account.
Locate the user for example files. C:\Users\[username]\
If you see no AppData press Alt to see the toolbar at the top of the window, select Tools > folder options, go to the view tab and select "Show hidden files, folders and drives" click OK.
Go to AppData\Local
Select all (Ctrl + a).
Delete
* Do not delete credentials (as it will remove their wallpaper) *.
This allows to release the error.
Maybe you are looking for
-
Satellite A305-S6858 win XP video driver does not
I recently bought a Satellite A305-S6858 in the States and I went down the Edition Vista Home premium preinstalledfor Win XP 32 sp 3. I had several problems to lift the computer up and running. After reading several postson various forums, I managed
-
A220-1 satellite has 9 does not recognize the USB Flash drive 4 GB
Hello I bought a new USB (attachment 4 GB) Flash drive.And I had a problem installing it.The same drive Flash was wel work with my friends laptop that has windows XP only. Someone of you can give me a solution for this problem. Concerning François ke
-
since El capitan analysis at disk level will not appear on the desktop or in the Photos
I can't download photos from my camera. When I insert the ScanDisk in my iMac, it will not appear. Anyone got the same pb? OS X El Capitan 10.11.2 iMac, iMac (late 2009) Intel Core 2 Duo 3.06 GHz 4 GB DDR3 1067 MHz
-
Process vs asynchronous sequence in parallel model
I've been studying the TestStand features and learn how to use it for about a month, so still very new for the environment (although I have been using Labview and Veristand quite strongly for about a year). I wanted to get some clarification on the
-
where can I download the Lenovo recommends SW that comes with Yoga Pro 2?
I like that there is the Chief of Yoga app I wonder if this software can be used in Yoga 13, and if so, where can I download it? Thank you.