DCC - cannot update the BIOS via command line settings

Similar Questions

• Portege R600 - cannot update the BIOS using Win server 2008

  Hi all.

  Pls help...

  I tried to update my bios to the new version, but I can't.

  I just downloaded bios update of the toshiba site for portage r600 for my model number (bios update 1.80 - winner), I unzip the zip, run the exe, but error popup came:

  Package for the TOSHIBA BIOS ver.3.2.9
  Unsupported product type is installed.
  Package BIOS BIOS Version: Ver.1.80
  Current BIOS version: Ver.1.40

  So my question is what am I doing wrong? I'm trying to update my bios from windows.

  is my version of windows: windows server 2008 Enterprise Edition x 64 SP1 (don't ask why, I just have to run Server 2008)

  Thank you.

  Hello

  Your OS windows seems not to be the Windows which was preinstalled on your Portege
  You cannot update the BIOS by using the windows server 2008 Enterprise Edition x 64

  You will need to put the system which has been pre-installed by Toshiba

  Good bye

• Updated the BIOS via bootable USB drive

  I want to update the BIOS by using the ISO image provided. I want to write this image a usb, then on startup, the bios update. How to create bootable USB drive.

  My system is E430, although the question is pretty generic.

  Hi again, ahaider7

  I don't think that a program would be necessary. However, after doing more research, I'm not sure the work process. In addition, update the BIOS via USB is not supported, because as far as I know. If you want to update the BIOS of your machine, I highly recommend using the utility to update the BIOS. You can also burn the .iso to a CD and the image file.

  Kind regards

  Adam

• How to set address static IP for cisco APS to the controller via command line

  Hello

  in our project it 208 APS registered in a WISN-1 controller

  How do I assign a static ip address to this Aps via command line in a controller 4404

  Thanks to the Internet, it takes more time to assign the static ip address

  You don't mention what version of the code, you are on but on 7.0:

  ap static IP config activate

  You can also add

  ap static IP config add domain

  ap static IP config add nameserver

• Deploy the model via command line

  Hi all,

  Is possible the deply a model via command line and set hostname and network?

  Thanks for your help

  PS: Do not forget a gift for the ghetto script repository

  You try to create a model of an existing VM using the CLI or the cloning of a virtual machine from a template?

  =========================================================================

  William Lam

  VMware vExpert 2009,2010

  VMware VCP3, 4

  VMware VCAP4-DCA

  VMware scripts and resources at: http://www.virtuallyghetto.com/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• Adobe Reader 11 (XI) will not open the file via command line

  Hello

  I posted this question probably inappropriate topic earlier today, so I am repeating again.

  I installed the new Adobe Reader XI today and when I tried to open some PDFs via command line, it reported a syntax error. Now, this syntax worked so far on versions 9 and 10 (I checked today with them and it does not), so my question is - where can I find new syntax, if there are? Google search did not help. Or what else could go wrong?

  In previous versions, I was able to open the pdf file (on page 5) like this (everything was taken from the help file 'Open settings')

  «Page "/A" CompletePathToAdobeReader = "CompletePathToPDF", 5"»

  That is to say

  "C:\Program Files (x 86) \Adobe\Reader.

  but now - not that it opens a specific page, but it won't open the file at all.

  Edit:

  Operating systems: Windows 7, Windows XP

  Thank you.

  Post edited by: v604

  Yes, he has correctly reported because there is a syntax error in your order. Try spaces between the /A switch and open the setting. Try this:

  "C:\Program Files (x 86) \Adobe\Reader" /A "page = 5" "d:\V2\DataSheet.pdf" "."

  I hope this helps.

  Sumit-

• Portege R700 - cannot update the BIOS

  Hello
  I recently bought a Portege R700 19 M and I downloaded the latest BIOS version available in the Toshiba support page and when I run the .exe file, it does not work with this message: "the computer is not supported.
  And when I look in the HWSetup Toshiba tool, it does not display the BIOS version but some weird characters (letters not usual) so I can't find out which version is installed.
  Thank you for your help

  Hey Buddy,

  You update the BIOS to the version preinstalled Windows from Toshiba?
  Are you logged on as administrator when you try the update?

  To be honest I doubt a problem to update the BIOS because I found other threads where users report that BIOS update was successful.

• Tecra M3 PTM30E - cannot update the BIOS

  Hello

  I can't install my new Bios on the Tecra M3 PTM30E-09X01LEN system.
  The message says: not supported.

  Why?

  I put t he understand.

  Hello

  First of all, I want to ask you why you want to update the BIOS?
  You have some problems with the laptop that could be solved by the BIOS updated?

  Also what BIOS you use and where did you find and download?

  The Tecra M3 PTM30E seems to be a European model and the BIOS must be placed on the European driver Toshiba page.

  I checked the page and there are two versions of the BIOS;
  BIOS 1.20 - WIN-FBCF is only for the models with filter virtual control of Angle (FBCF)
  The BIOS 1.50 - WIN is for models WITHOUT filter the virtual control of Angle (FBCF)

  Seems that you used the wrong BIOS!

• Qosmio G30 PQG31E - no driver XP 32? Cannot update the BIOS?

  As usual, obtained a computer laptop, but no recovery CD :(

  Got 32 installed XP (my Microsoft contract does not MCE) but a lot of missing drivers. Driver Toshiba page has all the drivers for XP MCE, XP 32 has only BIOS update, Bluetooth, HD - DVD firmwares, the virtual sound and drivers WI - FI!

  So I tought "Vista on this issue", but I checked the compatibility XP with Vista DVD I got a 'need to update the BIOS' (always a 1.40-2006/03/10)!
  My problem is that BIOS update always returns "this computer is not supported! Laptop has only one account, this isn't permissions problem, perhaps because many drivers are not present? Can I update the BIOS in safe mode?

  What now? Am stuck with a brick of Qosmio? Without controllers LAN to say the least, I can't not fact! Drivers XP MCE does work on XP 32?

  Any thoughts?

  Hello

  I found all the Win XP drivers for Qosmio G30 PQG31E!
  On the European driver Toshiba page, you can find the Win XP MCE drivers
  XP MCE drivers are the same drivers for Win XP Home or Pro.

  There are also some BIOS 3, 90-WIN and this BIOS is operating system independent. In other words, it works with Win XP and Vista...

  To update the BIOS the common Module must be installed
  You can find also on the European driver Toshiba page!

• Update the BIOS via broken WinPlash SATEGO P100-10U. Now just black screen.

  Hello

  I did an upgrade of the Bios via WinPlash as I installed the XBox Live. Upgrading the Bios did not work (stupid me) and therefore, I'll have just a black screen after that I have turn on the monitor. The machine emits no beep, nor does it show anything else.
  I have subsequently:
  Downloaded the WinPlash on another PC. As it says in the doc (unziped in a folder), but the file '... ". for bootable CD"is not generated (nothing else that the files have been copied).
  Subsequently I have burned (all files = part of Vista 32 Bit) with NERO on a bootable CD, but it does not start the program (CD starts spinning, LED in CD / DVD flashes yellow then it stops).
  Then, I only copied their executables on a USB key, tired to load it from there - ZERO nothing but the sound of the screens black and fan.

  Tried to access the Bios with combinations of power sur-bouton ' "+ ESC, F1, F2, F10, F12, Del, ALT (as the left of the SPACE key), CTRL.

  Could someone tell me if there is a start-up tool or a BIOS image tha starts, or a special touch?

  Concerning
  Thomas

  Hello

  so, you have little chance really bad because this issue needs to be repaired by a qualified technician. I had a similar problem and have searched for a few weeks for a resolution quick and good cheap but I couldn t find anywhere these tools mentioned you´ve.

  Your only chance to bring the machine back to life is to contact a [ASP (certified partner) | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT]
  and allow them to correct this problem. I asked a lot of people here, but no one from toshiba is here to give some nice tools... :(

  Hope that your machine will come back to life.

  Welcome them

• T420 BIOS 1.34 cannot update the BIOS

  Hello

  I am running UEFI BIOS 1.34 (ECP 1.11). Lenovo is delivered 1.37. I burned a CD with 1.37 to update my BIOS, but the utility tells me that an update is useless. I want to update the BIOS, because I have problems during startup when I connected USB devices.

  Anyone know a good solution?

  Thank you.

  I would like to download the BIOS and burn another CD and try again.

• E6510 - cannot update the BIOS

  I need to update my Latitude E6510 BIOS patch A01.1 new. When I run the updater it starts, restart the portable computer but nothing happens. The BIOS is always on A01.  I can't launch the BIOS A02. Why does this work? Y at - it a way for the patch to work.

  NOTE: I'm sure this is the right file. My service tag to select downloads.

  BIOS A03 fixes this issue. Can now update the BIOS in Windows 7 64 bit.

• HP Pavilion Elite HPE-270e cannot update the bios

  HP Pavilion Elite HPE-270e desktop PC

  Microsoft Windows 7 (64-bit)

  I have a problem running the sp49903.exe that contains the last update of the bios for my pc. My antivirus is disabled, no other programs are running, I am logged in as administrator and also tried to run as administrator, but that I always meet the same problem. It runs and I click Next and then I agree with the terms of the license agreement and then click Next and then I get an error message: (the contents of this file cannot be unpacked. The executable file that you are trying to run has been damaged. If please get another copy of the file, verify its integrity and try again.)

  My latest version of bios is 5.28 and I'm trying to update to 5.29.

  HP Pavilion Elite HPE - 270e Desktop PC product specifications

  Software downloads & Driver - HP Pavilion Elite HPE-270e desktop PC

  you try to download a new copy of it?

  I did and it worked.

  try to download and try to install on another PC and see if the error is the same. It will not install on another PC, it checks to see what the BIOS is the first. But the error you report no has nothing to do with the BIOS, it tells me the downloaded file is corrupt and since I just tried to download and install and it worked, it tells me the file on the server is good.

  Good luck

  Bill

• Satellite A300D-125 - cannot update the BIOS

  Failure of the update of the BIOS for Toshiba Satellite A300D - 125 PSAK4E (2, 80-WIN32 to 3.10 - WIN32).
  The source that I tried to level is 30/04/09 dated dated http://eu.computers.toshiba-europe.com/innovation/tracker.jsp?file=http%3a%2f%2fsupport1.toshiba-tro.de%2ftedd-files2%2f0%2fbios-20090430094605.zip

  Screenshot available for more information futrher.
  http://img12.imageshack.us/img12/6567/biosupdatefail.jpg

  Please help thanks.

  Also can someone tell me what's new in 3.10?

  Hey Buddy,

  For your model laptop is not a BIOS version 3.10.

  If you are looking for on the site of Toshiba Satellite A300D and PSAK4E model number, you can download the version 2.80.
  Version 3.10 is for other A300D models!

  You can check this on the Toshiba site and then stop to update BIOS please. You can destroy the ROM module

• Tecra M3 - cannot update the BIOS

  Hello

  I have a Tecra M3 (PTM30E) and TEMPRO says they are 2 updates of bios for the computer.
  I downloaded, but when I run it I tells me that the computer is not supported. How to upgrade the BIOS?

  Best wishes

  Michael

  Why in the hell do you need a BIOS update?
  Only because the Tempro said that there is a new update?

  TEMPRO sends only a notification that a new file has been downloaded
  It s not a recommendation that you have so far!

  So if your laptop runs without problem don't update anything!

  I always took this advice; never change a running system! And it of really wise counsel

  Welcome them