HP Pavilion g6-2302ax: query on the recovery of the reduced image

Similar Questions

• Problem of recovering files after completing the reduced image of the system

  I wanted a quick and easy way to remove bloatware on my HP Pavilion dv6 laptop and I recently found the option to minimize the system image.  During execution of the task, I was given the option to first back all my files and I thought it was excellent.  After waiting 2 hours for her to create the backup, he created a 67.5 GB file on my backup drive and then proceeds to reduce to a minimum the system image.  While he was complete my phone restarted and went through all the steps of setting up for first use.  When everything was done, I plugged my backup disk and navigated to the folder of recovery of file titled "Backup_2011-10-28 125331.  In the file was a file "Recovery.exe" so I guess that I just had to run the file and everything would be restored.  However, he did create a file on the C: drive in the "System Recovery Files" which basically looks like a simple list of files.  The file that was done was only 12 GB, which makes no sense given that the backup folder initial took 67.5 GB on my backup drive.

  I assumed that this recovery file would simply perform a system recovery, restore all files created by the user where they were originally and basically to restore my system to how it was before reducing the image of the system, except of course for the fact that the image of the system would be less.  I was wrong to assume that or am I not successfully restore my system?  When enter windows and attempt to restore the backup created by some HP program that did it, the file is not even given as a possible source of save.  How can I get my computer to where it was before the restoration?  I had more than 100 GB of music, games and programs out there that are now lost and trying to remember what I lost everything will be very tedious, not to mention how long to actually get all the files.  Can someone help me with this? Thanks in advance!

  OK, what I learned hae is the backup created during the copy just for the recovery of all the files in the format of the image (management of stormwater in case you), the restore.exe was never to return to the original lcations since maybe it's different, so there just pictures of stormwater management to normal files and dumps then converts into a folder to restore you It is up to you to sort through them and put them in the appropriate places, stupid I agree, but that's the way it was designed.

  Back to your problem, I would like to rename this "System Recovery Files" System Recovery Files 2 folder, then try the recovery.exe once again, see if there is no option during recovery, make sure you select all files if given a chance, see if it produces more files than he did the first time.

  If this does not work there is a way to convert all the files management of stormwater to 1 wim file and then mount the wim file in explorer to copy the files you need from the image, it's very complicated process which I've never tried it myself.

  .

• Image recovery factory HP Mini 311 - 1037NR PC for the recovery of the reduced image?

  We have several of another model of netbook HP and are capable of making an image reduced to those system recovery. However, PC HP Mini 311-1037NR machines that we only have a system recovery option - 'System Recovery'

  Is it possible to reconfigure or update this model to have this option?

  or is there a way to create a minimal system recovery media?

  I do not think, it has not been updated for the original version of your Recovery Manager software, you can do anything unless HP updates.

• The issue of reduced Image recovery?

  So I tried to do a reset of my HP envy m6 - but the option is not available in the HP Recovery Manager and the reduced image recovery seems pretty well exactly the same (I have no need of trial or games) - my problem is, however, with the recovery partition.

  Will be the recovery of the reduced image delete all partitions and reinstall partition recovery (and os) - because I'm fine with that.

  Or do I have to specify not to remove the recovery partition?
  Or not make a choice, and I can just save the recovery partition?

  Thanks for any help you can provide!

  Hello

  Please check:

  

• Reduced image recovery and differences in system recovery?

  I bought Envy of HP dv7 - 7252 portable sr and before use of would like to learn the process of possible recovery of HP Recovery manager.

  Support document http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=120&prodSeriesId=...

  With Factory Reset of his clear - recovery necessary and disc HP Media HARD will be completely reformatted and created default partitions

  With recovery of Image minimized and Systemm recovery is not if clear what are the differences:

  1. is the only difference that reduced image recovery will not install the evaluation version?

  2. what to partition the preparation process?  for Systemwrittenm recovery which reformats the disk system and which on the reduced image recovery ? Does reformat?

  3. What is the difference between the two to start the image reduced recovery /Systemm recovery and HARD drive recovery HP Media?

  4. default Systemm recovery not delete the partitions created by the user, but reduced image recovery provide a command prompt: delete or not.    It is valid for both methods: the HARD drive and recovery media?

  5. what CAN I DELETE in some SORT MY PARTITIONS AND LOST MY DATA USER WHEN USING image reduced recovery /Systemm recovery?  I found on this forum the recovery media response he no prompt reduced image recovery and default partitions created by the user will be deleted

  Types of recovery

  Your computer can have three types of available system recovery, or he might have only two. Use the type of recovery in order to solve your problem without making further changes as necessary.

• HP probook 440 G1 query on the recovery partition

  I not create recovery DVDs when I received my laptop then I upgraded to windows 8.1. I want to downgrade to 8 but when I perform a system recovery it says: no image found. I am aware that I need the recovery DVD to perform the recovery.
  
  My questions are:
  
  1: if I use a 8 CD to format my windows partition win then I will be able to use the recovery partition in my HARD drive and perform a restore to the factory settings so recover windows 8
  
  2: if I create recovery DVD now with victory 8.1 installed recovery DVDs contain wins 8? I want to say can I perform recovery with these DVD's going to work?
  
  Any knowledgeable person here please help me...

  If your HP ProBook 440 G1 comes with Windows 8 and you upgraded to Windows 8.1, you can try a Windows of "cool". This should return Windows 8, as it did when I refreshed my Split HP 13 x 2 which has been upgraded to Windows 8. 1

  If this does not work, try to set the "HP Recovery" partition as "Active" in the Windows Disk Management Console and restart the computer. If everything is working correctly, your computer must begin the process of HP recovery and restore your computer to a factory State.

  (1) you can set the "HP Recovery" as "Active" partition using a Windows installation disc and choosing repair options.

  (2) If you try to create your discs of HP recovery at this moment and the system allows you, the created disks will be the original image of Windows 8, which has been installed on your computer.

  If none of the works above, you will need to contact HP to order a set of disks.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• HP pavilion g6 2302ax: did not find drivers for HP pavilion 2302ax g6

  Hello Sir,
  I use the HP pavilion g6 2302ax model. I tried updating my drivers but I could not find the drivers for it on the site.
  Any help will be appreciated.

  @Ragas

  Your drivers here.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-G6-notebook-PC-series/5330578/model/5344271

  REO

• Recovery Manager cannot restore computer using the original image

  Hello

  I'm working on a Pavilion P6000 desktop series (WW639AA).  Windows 7 (64 bit) does not load as it seems that his score is corrupt. I ordered a new restore disc (and additional floppy) HP to restore the hard disk.  I tested the hard drive and all past.  However, when I run the Recovery Manager and try to restore the computer, I get the following error:

  «Recovery Manager cannot restore you computer using the original image.»  Contact HP support.  ' Error #0xe0ef000e.

  All of the suggestions.

  Thank you.

  blewettjl,

  A disk that has been 'cleaned' will have this error with HP rated DVD.

  HP has a patch, called CyberLink Recovery disk utility: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-80183-1&cc=us&lc=en&dlc=en

• HP Pavilion G6-2302ax: drivers not available for 64 bit windows 7

  HP Pavilion G6-2302ax drivers not available

  1 chart

  PCI\VEN_1002 & DEV_6840 & SUBSYS_184A103C & REV_00

  PCI\VEN_1002 & DEV_6840 & SUBSYS_184A103C

  PCI\VEN_1002 & DEV_6840 & CC_030000

  PCI\VEN_1002 & DEV_6840 & CC_0300

  2. Bluetooth controller

  PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C & REV_00

  PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C

  PCI\VEN_1814 & DEV_3298 & CC_0D1100

  PCI\VEN_1814 & DEV_3298 & CC_0D11

  3. Ethernet controller

  PCI\VEN_10EC & DEV_8136 & SUBSYS_184AEC103C & REV_05

  PCI\VEN_10EC & DEV_8136 & SUBSYS_184AEC103C

  PCI\VEN_10EC & DEV_8136 & CC_020000

  PCI\VEN_10EC & DEV_8136 & CC_0200

  4. network controller

  PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C & REV_00

  PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C

  PCI\VEN_1814 & DEV_3290 & CC_028000

  PCI\VEN_1814 & DEV_3290 & CC_0280

  5. SM Bus controller

  PCI\VEN_1022 & DEV_780B & SUBSYS_184A103C & REV_14

  PCI\VEN_1022 & DEV_780B & SUBSYS_184A103C

  PCI\VEN_1022 & DEV_780B & CC_0C0500

  PCI\VEN_1022 & DEV_780B & CC_0C05

  6 UNIVERSAL Serial Bus (USB) controller

  PCI\VEN_1022 & DEV_7812 & SUBSYS_184A103C & REV_03

  PCI\VEN_1022 & DEV_7812 & SUBSYS_184A103C

  PCI\VEN_1022 & DEV_7812 & CC_0C0330

  PCI\VEN_1022 & DEV_7812 & CC_0C03

  7.

  Bus controller series UNIVERSAL (USB)

  PCI\VEN_1022 & DEV_7812 & SUBSYS_184A103C & REV_03

  PCI\VEN_1022 & DEV_7812 & SUBSYS_184A103C

  PCI\VEN_1022 & DEV_7812 & CC_0C0330

  PCI\VEN_1022 & DEV_7812 & CC_0C03

  Need to install these drivers for windows 7 64 bit

  Hello:

  First download and install the amd chipset drivers and restart.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  Graphics card:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103954-1&cc=us&DLC=en&LC=en&OS=4063&product=5275619&sw_lang=

  Audio:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103764-1&cc=us&DLC=en&LC=en&OS=4063&product=5275619&sw_lang=

  Bluetooth controller:

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5229463&swItemId=ob_113004_1&swEnvOid=4058

  Network controller:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-111781-1&cc=us&DLC=en&LC=en&OS=4063&product=5275619&sw_lang=

  Ethernet controller:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103913-1&cc=us&DLC=en&LC=en&OS=4063&product=5275619&sw_lang=

• Windows 8 HP laptop Pavilion will not boot from the cd?

  Hi all

  I have a Windows 8 HP Pavilion laptop. I forgot the password of my account, but I wasn't worried because I had a recovery disc. However, even with the cd in the laptop, I directed to the login page every time. I want the cd to run the place and recover my account! I have enabled the legacy in BIOS and disable secure startup, and I even changed my boot order to put the boot first CD. None of this works well. Can someone help me? I really want to access my laptop soon.

  Thank you

  Alice

  Immediately after switching on the laptop, press the ESC key to get a menu. Then press F9 boot options. Use the arrow key to move down and select/highlight the CD/DVD drive, and then press the Enter key.

• A query with the weeks/months/quarters without filling data

  During recovery of monthly data from any data source, experts how CF (which I am not one) creates results for the time intervals where there is no results? I.E. event data to draw per month, how can I show that there can be no activity for a given month? Thanks in advance.

  There is a way to make more efficient approach to dempster.

  Step 1: run your query from the database. (1 queries)
  Step 2 - create a cold fusion query to get all years-months in the range of dates of interest (2 requests)
  Step 3 - make a query of queries for years-monthly query 2 that are not in the application 1. (3 requests)
  Step 4: make a query of queries that questions 1 and 3 trade unions.

• When you type a query in the bar always double the third letter, for example, research, if I want to write a 'youtube' written "youutube" what to do, help

  When you type a query in the bar always double the third letter, for example, research, if I want to write a 'youtube' written "youutube" what to do, help

  Hello chilli.willi, try Firefox Safe Mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• How can I get a query in the search field to open in a new tab or a new window, and the current window?

  How can I get a query in the search field to open in a new tab or a new window, and the current window?

  If you are looking through the search bar in the Navigation toolbar, this preference can be changed to research it open in a tab.

  Type of topic: config in the address bar and press ENTER. Then answer "I'll be careful." Type this pref in the search at the top.

  Browser.Search.openintab = double click to switch to true

• Laptop HP Pavilion 14: try to reset the password Windows 10

  I recently bought a new laptop HP Pavilion Notebook 14 and in the initial configuration, created an account and a password but did not create a password reset disk, an administrator account, or an alternative setting for logon. I am also not registered with Microsoft so you cannot change the password in this way.

  I've seen instructions on downloading ISO software and trying to boot via USB key, but none of the command prompt so far work. I tried F9, F10, F2, F6, etc all on their own or by pressing ESC first. Is there another way to recover the password? Otherwise, given that nothing has been put in place on the hard drive and yet, it would be easier to default to the factory settings? And if so, what is the best way to proceed?

  Hello

  You can perform a factory reset as indicated in the link below - see the subtopic "valuation when 10 Windows does not start successfully.

  http://support.HP.com/us-en/document/c04758961

  Kind regards

  DP - K

• Pavilion dv6: how to bypass the disable password & systems admin

  pls help to find the code to unlock the bios.

  define oner year bios password and forgot it.

  HP Pavilion DV6 model

  After the third time going wrong get error: "the system disabled key: 64680447.

  pls help

  Kind regards

  Alexey

  Hello

  1. just to be sure, check the stop code (64680447) is correct.

  2. If the stop code is correct, stop the laptop, remove the hard drive from start and try entering the code again, preferably through an external keyboard.

  Kind regards

  DP - K