HP Pavilion g6 (B1X18EA #ABH): switch to Internet does not work after update of 10 64-bit Windows

Similar Questions

• Compaq Presario V3118AU Internet does not work after update BIOS and Broadcom Wireless Driver!

  I posted here yesterday on my computer because I have updated the Bios program with the update of the BIOS of 2007 and after that my internet no longer works.   The advice I've gotten is update Broadcom driver wireless as well as I did yesterday but the same result.    I was told also that if all things go wrong can I downgarde my Bios program that imposible because the older version on my computer model page is actually installed now on my computer.  I have run out of idea already of what else could be done please help.    Sometimes wireless connection to connect to the router but often difficult and if I am connected I can't go to the internet and to connect to the Local network I just get limited connectivity.

  Can someone please tell me what to do to solve this problem.

  Thank you very much!

  You are welcome. Let us know how it goes.

• 11-n001tu x 360 PC Pavilion: 11-n001tu x 360 HP Pavilion touchscreen does not work after updating drivers

  Touch screen of my laptop does not work after update my drivers to date. I opened Tablet PC setting, he said: "there is no pen or touch input available for this view. (I used the shortcut to open the parameter because the Tablet PC set disappeared into the control panel as well as the features of the touch screen). I tried to make a recovery, but it has failed to bring to the touch.

  In addition, the HID-Compliant touch screen driver is missing.

  Please help me solve this problem, thank you.

  Hi there @BryanHech,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that your touch screen has stopped working after update the drivers on your laptop PC HP Pavilion 11 - n001tu x 360 .

  How you did update the drivers?

  You use Windows Update?

  Have you checked to see if the driver has been disabled?

  Have you tried to run the Troubleshooter in Windows?

  Have you tried to do a hard reset?

  Have you tried a update the BIOS and graphics driver?

  Have you tried to perform a screen touch diagnosis the HP Hardware Diagnostic tests?

  Have you tried to Configure the display key?

  Have you tried to activate the driver in touch screen device manager?

  Please follow these steps to see if you can activate the touch screen:

  • Open the Device Manager
  • Find "Human Interface Devices"
  • Expand "Human Interface Devices"
  • Right-click on "touch screen HD compliant."
  • Click 'Activate' (if available)
  • Restart your laptop.

  If losing your touch screen happened after you had made a set of Windows updates, use the system restore feature and choose a date that was before the problems began.

  To use the system restore in Windows:

  • Go to the Search
  • Type of Control Panel
  • Click on Control Panel
  • Click System
  • Click on the System Protection
  • Click the System Protection tab
  • Click on System Restore
  • Click Next
  • Choose a restore point
  • Click Next
  • A box that says "once started, the system restore cannot be interrupted. Do you want to continue? ' displays
  • Click Yes to confirm

  When the system restore is complete, you'll be up a pop that says that it has been completed.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

  Thank you!

• My internet does not work after the installation of El Capitan 10.11.3.  Help, please!

  I upgraded to El Capitan 10.11.3 tonight and now internet will not work.  I can't connect to the app store either.  I can connect to wifi but safari says "Safari cannot open the page.  Safari can't open the page "https. ' / / www.yahoo.com/.  The error is "the operation could not be completed.  Operation not permitted. (INSPOSIXErrorDomain:1) ' can someone help!

  Thank you!

  Hi SmilingDaddy

  Here are a couple of things to try. Here I am assuming you are using a wireless router?

  Open system preferences > network

  The name of your network appears in "network name"?

  Click on the button "Advanced...". »

  In the WiFi list, make sure that your preferred network is at the top of the list.

  Click on the TCP/IP tab and click on 'Renew DHCP lease'

  Now you have Internet?

  Try turning off WiFi, either in the same pane of network, or by clicking on the WiFi icon in the menu bar. Then wait a minute and put it back on.

  If you hold down "Option" key and click the wireless in the Menu bar, you can click on the 'open Wireless Diagnostics... '. "There is also info even before making it on the signal strength, etc... WD can give you help and additional information.

  Let us know if it works and if not, please give any info you can. Are you using WiFI? Are you using a cable/DSL Service? What model of iMac?

  Hope this helps, Greg

• Internet does not work after the installation of updates

  From 2 updates (KB972270 and KB955759) internet wouldn't work once these updates have been installed.  I removed the updates and turned off the automatic update feature.  Periodically, I would try again but the same result.  I'm now 16 updates to download and I tried last night, but once again not Internet... even after manually loading all, but updates 2 above.  I want to keep my computer up to date but can't seem to solve the problem of the internet.  Is there a problem with the Microsoft updates?  How can I fix the problem, so I can update my computer?

  Open Internet Explorer (only) to http://windowsupdate.microsoft.com GOLD http://update.microsoft.com/microsoftupdate . Select CUSTOM and scan: are any of the updates other than KB972270 and offered KB955759?

  NB: If an update of root certificates is listed under the category of optional software updates on the left side of the scan results window, install it to enjoy greater security of IE8.

  If you choose not to install KB955759, you run difficulty he #50326 in http://support.microsoft.com/kb/954157 to protect your computer.

  Note: I'm not going to tell you it's OK do not install a critical security update. If IE crashes after installation of an update, something is wrong with your computer (e.g., an infection, one or several incompatible modules of the IE; a "horked" install IE8).

  If you install a security update & have a problem...
  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Internet and the sound does not work after the ATU Vista 64-bit

  I really didn't want to display in the hope I would find the answer using Google, as I did in the past, but this one i can not find the answer for.   2 days ago I d/l a program called Advanced System Care. I was told by 3 of my friends it works well to clean your junk files, Defragging ect ect.

  After d/l and the operation of the program, I had to leave and shut down the system. Today I start everything is fine, and then I noticed that I have a red X on my speakers. This is not the red X you get when cut there a smaller lower-right next to the speaker in the toolbar. When I mouse over it, it says "Service Audio work not" when I click it to repair, so good it shows all is working (volume mixer control is non-interactive) then I go to control panel and click on the speaker and I get "this computer cannot play audio because the windows audio service is not enabled.»   You want to enable "I click Yes and it brings back me just in the region, that I was when I clicked on the small speaker in the toolbar with the red x.»  Everything always looks the same as it was when I put in place.

  Is there anything else I can look?

  Second problem happened at the same time.  I have the same red x on my 2 computer screen in the toolbar on the bottom right. When I try to repair it it says this "this service cannot be started because it is disabled or because it has no enabled devices associated ' when I go to Device Manager and check to see if it is still showing my d-link wireless there is black! on a yellow background. When I try to access the computer to find local internet connections, it says that it can't find. I know that my Linksys is working because my Iphone is connected.  I already tried to install a cord between my router and my system and it still does not notice the internet even when you try to reconfigure.

  I read where I can make a dirty windows vista installation and fix it. but I really hope that there is a better way.  I also tried to restore my computer to last week when I made a back up and it seems after the use of this program, that he got rid of that as well. So now im out with to be able to roll back before I D/L this close program useless lol

  I'm using Vista ult 64 bit, that the computer is built for gaming and music. OCed Q6600 to 3.2 4gig ram 8800gt 2 in sli on a configuration card XFX mother if any other system or other questions please do not hesitate to ask.  I hope that someone has had this problem and can help me to solve it.  I don't want to reformat my HD or what I really want to pay Microsoft to talk to them on the phone

  Thanks for your help

  After 3 hours on the phone with the microsoft problem solved. Seems some how using CSA and the update of microsoft it limited my computer to start all programs at startup.

• Internet does not work after you set up parental controls.

  I just create a new account and set up parental controls for it. Before I did the internet worked, but after you have configured parental controls, internet would not just work for my desktop which has a direct line.  I have a router and even after, the wifi signal and internet would always work however my line connection direct wouldn t.  I continued doing to solve the problem and start system restore, but every time I tried to set up the account with the internet parental control just doesn't work.

  Thanks in advance.

  
  

  Hello

  Maybe there's a settings problem.

  See this and the 'related links '.

  How to install and use Parental controls in Vista
  http://www.Vistax64.com/tutorials/95139-parental-controls-Setup-use.html

  and these:

  Setting up Windows Vista's Parental control
  http://www.bleepingcomputer.com/tutorials/tutorial139.html

  Set up Parental controls
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Internet does not work after changing graphics card.

  Hello

  I have a HP Pavilion HPE h8-1212 on windows 7 (64-bit) and I changed my graphics card for an AMD Radeon HD 7790 so like my case.

  after reboot and installation of my graphic card drivers, I noticed that I have yet 2 "Bluetooth devices" (bluetooth device) and I don't have a Wifi connection. I am currently connected to my internet via an Ethernet cable.

  Here are some screenshots of my problems:

  

  

  Please help me with this.

  The wifi card, if it's a minimap, as it is in the image, should have had two sons goes to the card wifi which were channelled through the case.  These were responsible for picking up the wifi signals to work.  Since the screenshot shows the weak or no signal, I suspect this is the question.

  

  As to describe the process of removing antennas, I couldn't find the following steps.

  Before you start: Remove the access panel, the collar, the higher optical drive and the upper bezel.

  1. Detach the antennas wireless the wireless LAN card.
  
  
  2. Cut the cable tie fixing connectors antenna for the front i/o cable harness.
  
  
  3. Pull the antenna cables without wire through the access hole in the upper part of the unit.
  
  
  4. Pick up each cable hooks fixing the top of the page of the PC.
  
  
  5. Detach the screws for each antenna.
  
  
  6. Pull the antennas of the unit off.

  In the end, it seems that the antennas are routed right under the top cover.

• Satellite L300-11V - Internet does not work after you remove software

  Hello

  Internet my brother no longer works. We believe that it is because he took off a bunch of software/programs to free up space.

  He said that the problem is
  ... "There are problems of hardware or driver with the network card"Realtek RTL8101 Family PCI - E Fast Ethernet NIC (NDIS 6.0)"on this computer".

  Can someone please tell me how to solve this problem, or what to download?

  The laptop is a Toshiba Satellite L300D-11V

  Thank you

  Hey Buddy

  This error message is that you need to reinstall the driver for the network card. You can get this driver on Toshiba page:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  If you have installed the latest version of what the Internet should work again! :)

• HP Pavilion laptop TS 15: HP Pavilion 15 laptop wireless TS does not work after update of Windows 10

  After the Windows Update the wireless doesn't work anymore.  No link found.  Wireless button remains orange.  I updated the drivers and uninstalled and reinstalled the drivers.  Nothing works.  I've seen a lot of relays since yesterday and tried them all.  None have worked yet.

  SOLVED!  I don't know how, but after the stop and the reopeing a few hours later, I again have a Wi - Fi connection.  I guess it was a combination of updated drivers and 10 Microsoft Update finish instalation in the background.  I thought that this was done when I posted, but when I stopped the last time it took a lot of time.  So I think he finished the instalation

• HP Pavilion G6 - 2221ES: recovery Partition does not work after update from HP.

  Hello

  I've just updated my laptop using this patch from HP: sp63774.exe

  It was supposed to fix a recovery environment that slows after reclassification of 8.0 to 8.1 Win Win

  Now, I can't get into the recovery Partition.

  It justs gets stuck after the message: "Please wait...". ».  I get the options to restore the system. Just a black screen.

  link to patch   (Section Software-Solutions)

  Help, please.

  Thank you.

  Hi @jose2016,

  Thank you for the update.

  Did you create your recovery media before making the update for Windows 8.1? If you create a recovery USB disk, then a labour recovery partition. Create a recovery USB disk (from support.microsoft.com). You can access the Recovery Manager of Windows? Computers HP - performing a recovery of HP (Windows 8) system. Another link that can help with the Recovery Manager's computers HP-HP System Recovery troubleshooting (Windows 8)

  You can try to do a restore back to before the update has been installed? Computers HP - using Microsoft System Restore (Windows, 10, 8)

  You said that you do not have a recovery partition. If you select disk management, should always data on this subject and he is in good health?

  Were you able to boot in safe mode?

  Have you tried to run the troubleshooter in Windows?

• Pavilion dv6 sd card reader does not work after upgrade to windows 8

  Hello

  My card reader SD HP Pavilion dv6 does not work after windows 8 upgrade (6 months ago). Previously, it was working fine when I was with Win 7 (which is the default OS with this laptop).  I don't find the device in Device Manager (under the peripheral system or hard drives). Read the similar section in the HP forum, but it did not help as much as the device is missing in this case. Can anyone help?

  Hi SanSam.

  Thank you.

  Install the driver from Realtek for Windows 8 card reader.

  Please post your results.

  Best regards
  ERICO

• Windows 7 - microsoft so far and now internet does not work

  As usual, an update came on my computer and I downloaded it.  And now my wireless does not work. It tells me that there is a wireless connection, but not the internet.  I tried to restart the modem and still nothing, and I know it's a problem with the bc computer other computers in my House have an internet connection. I tired to restore the computer before the update and it wont let me restore bc if some anti virus.  How to bring back my internet service?

  * original title - two days ago, I did a regular windows/microsoft date and now my internet does not work. Help? *

  Click Start, type: Troubleshooting

  Press enter on your keyboard

  Search for "Internet connection".

  Return of results, double-click the Internet connection

  Follow the wizard to display on.

  Resources:

  The problems of network Windows 7 http://clkon.us/bJtkA0

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Internet does not work, make HTTP: error 12007 connection

  * original title - error 12007 I need help! *

  I have a Windows XP with Service Pack 3 internet does not work. I got tired, he works with this http://answers.microsoft.com/en-us/ie/forum/ie8-windows_other/error-12007-the-server-name-or-address-could-not/2cbfb8a8-8970-4aaf-843c-1c781dc8053f post, but when I tried it on my netbook my windows update comes out of @%SystemRoot%\system32\shell32.dll,-22580

  I have an idea I have a missing or corrupted WinSock, but I'm not sure.

  Diagnosis of last run time: 23/01/12-18:52:53

  WinSock diagnostic WinSock status attmpting error information to validate the WinSock providers database: 2 error not all entries could be found in the basic services provider winsock catalog. A reboot is required. user redirection of information in support of the appeal. user redirection of information in support of the appeal. Diagnosis of network adapter

  Network location detection Info Using the Internet connection at home Identification of network adapter Info Network connection: name = Wireless 3 network, device = Broadcom 802. 1 1 b/g WLAN, LAN = Media Type, type SubMedia = wireless Info Network connection: name = connection to the network of Local 2, device = Atheros AR8132 PCI - E Fast Ethernet Controller, Media Type = LAN, type SubMedia LAN = Info Connections Ethernet and wireless available, ask the user for selection action User input required: select network connection Info WiFi selected State of the network adapter Info The network connection status: connected

  HTTP, HTTPS, FTP Diagnostic

  HTTP, HTTPS, FTP connectivity warn HTTP: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved warn HTTPS: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved warn FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved warn HTTP: Error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved warn HTTPS: Error 12007 connecting to www.passport.net: the server name or address cannot be resolved warn FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved error Could not make an HTTP connection. error Could not make an HTTPS connection. error Could not make an FTP connection.

  Hello

  You can refer to the suggestion provided by Divya the similar thread with a possible solution:

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/error-12007-the-server-name-or-address-could-not/2cbfb8a8-8970-4AAF-843c-1c781dc8053f

• Recently, I ran an anti-virus and learned that my netBT.sys file was corrupted. The anti-virus software installs this file but now my internet does not work.

  netBT.sys replacement files viruses

  Recently, I ran an anti-virus and learned that my netBT.sys file was corrupted.  The anti-virus software installs this file but now my internet does not work.  I guess I have to replace this file, but don't know how.  I see that I need to use my windows XP CD but my CD drive is broken.  How can I go about replacing this file?

  Thanks in advance

  Hi DonMendigo,

  Follow the suggestions below for a possible solution:

  Method 1: Try the SFC (System File Checker) scan on the computer.

  To run the System File Checker tool, follow these steps:

  a. click Startand type cmd in the box start the search.

  b. right click on cmd in the list programs, and then click run as administrator.

  c. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  d. at the command prompts, the following line and press ENTER:

  sfc/scannow

  See also:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

   

  File system (CFS) Checker

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

   

  Method 2: If you are still unable to connect to the internet, then follow the article in the Microsoft Knowledge Base and check.

  Programs Internet in Windows XP cannot connect to the Internet via a connection to wide band

  http://support.Microsoft.com/kb/307164

   

  I hope this helps.