HP Pavilion g6: USB 2.0 works but not port to usb 3.0.
Hello
I got the problem like I said and port 2.0 usb works well but not 3.0
port 3.0 gives the power but don't receive all the data to the computer.
This happened after I installed windows 7, but it worked with windows 8.
I tried to install the 3.0 drivers, but they do nothing.
If this helps them more then my laptop: HP Pavilion g6 - 2203sa.
Thank you.
Hello
Download and install the drivers for the AMD Chipset on the following link.
http://www2.ATI.com/drivers/13-9_win7_win8_32-64_sb.exe
When the installation is complete, restart the laptop.
Kind regards
DP - K
Tags: Notebooks
Similar Questions
-
Some * changed my password to Icloud and lock my phone by finding my phone app
What should I do now, I can not activate my phone. My apple ID still works but not my Icloud how can I reset the password
-
How to remove a domain controller that was removed from the Internet works but not demoted
How to remove a domain controller that has been remove from the Internet works but not demoted
got two domain controllers and been deleted but not retrograde
can help pls
Hello
Your Windows is better suited for the directory on TechNet Services. You can follow the link to ask your question: http://social.technet.microsoft.com/Forums/en-us/winserverDS/threads
I hope this helps.
-
I found an old vista home basic dvd with a key, how can check whether key works, but not install it? some dvd install can be live boot from themselves too [password required for a direct start?]?
Hello
You must install it to see if it is legal to do so.
There is no public database of product keys.
See you soon.
-
I tossiba laptope when I try music on my laptop speaker works but not the headphones speakers not even extra work
Hi rajuarman,
-Headset works fine on other computers?
-Have you installed the audio drivers on your computer?
-Not the problem only occurs when trying to play music in Internet Explorer?
Your question does contain all the required information necessary for us to help you. Please include more information to continue troubleshooting as a result.
Please see How to ask questions and provide the information required to help others.
In the meantime, check out these articles:
-
XPS 13 - Wake from sleep using USB works, but not when lid closed?
I mainly use my XPS 13 as a desktop replacement - I have the lid closed; monitor and a keyboard, a mouse connected (both wireless).
I finally managed to get to wake up from its sleep by moving the mouse by activating 'allow this device to wake the computer from sleep mode' in the device (Win 7 64 bit) Manager, but it does nothing when the lid is closed, which is 99% of the time because I am using a monitor. I have to open the lid and use the power button.
Does anyone have an idea on how to get this working, or not at all?
It works fine on my other laptop Dell I bought at the same time (Inspiron 15). One is connected to a TV as a "Media Server", if the lid is also closed all the time, but he wakes up from his sleep when I move the mouse USB wireless.
OK, it's now solved!
The A08 BIOS update allows this, BUT the strange thing is that sometimes the option ' USB wake sleep ' is not available after a BIOS flash.
This time, it was and now I can wake up the laptop from sleep, even with the mouse Wireless USB via a hub!
Yay!
-
My computer crashed and it was restored. I am running Windows XP and I do not re - install Firefox Aurora after the computer has been restored with the new motherboard and HDs. All my software works, but the AutoComplete is not the case. Firefox remembers my username for login and my password. It's just the AutoComplete. I have to tap completely in the name of the site. When I opened the window of the history and bookmarks, there is no entry. The yellow star in the address bar does not work. When I click it, nothing happens.
You can temporarily rename the file to places.sqlite.sav as a test.
-
PSC 1350 printer works but not scanner
Hello
Have just upgraded to Windows 7. I have the printer psc 1350 to work & print documents. I can not get the computer recognized or even to recognize the scanner function. I have the installation discs and who have tried but still no scanner function.
Site Web of HP said that the Windows 7 software should recognize the psc1350. It recognizes the printer function but NOT the scanner function.
Any ideas?
Hello
Open the program to Scan and Fax from Windows, and then follow the steps set out below, the steps for Windows 7 are identical:
http://support.HP.com/us-en/document/c03511920
Kind regards
Shlomi
-
Restore function looks like it works but not recover.
I tried restore several times and it seemed he was working but would never restore to a set point. I even made a point and then tried to restore at this point without success. The answer was "Impossible to restore.
Some security programs prevent changes to their file and must be configured to allow the restoration of the system work. For example, if your computer has Norton Antivirus or Norton Internet Security, you must disable Norton product Tamper Protection before you run the system restore. See the documentation of your security program. Boulder computer Maven
Most Microsoft Valuable Professional -
Save the file to the shared folder in Release Build works, but not in Export version
We are ready to present our application to App World. However, we noticied when testing the 'export release' that build our file saving function of does not work (the file is not be saved - but the folder we created). The file records fine when running in debug or release mode, but not to export the final file.
Is - this all simply because we are not supposed to try to run the bar directly exported version file and it should work once on App World? Has anyone experience this problem?
We are trying to back up the folder "shared/music/AppName" If that helps.
We have corrected it. We were writing somehow to the wrong address in the "shared". For some reason, it still worked when you use version debug/directly from the IDE, but does not when exported. That's all now works well.
-
I use a bb bold 9700 to test my application and I can not connect via the http connector class. Only the built-in browser works. Other applications, such as twitter, unable to connect either. Curiously, the integrated application of pandora plays music very well via wifi.
I have the wifi active only, no data plan. Code works fine on the Simulator.
Any ideas?
I managed to do work, but the results are not compatible. I also got a new error, tunnel downwards.
I found one problem was that I was using http instead of https for the facebook api url, then operator error here.
Yet, it is strange that other applications like twitter could not connect through wifi, but I think it might have something to do with problems of http exception across the system. I don't know, just guessing.
I know that at some point the embedded browsers and the internal browser worked so that the apps cannot connect by themselves. I seem to have gotten past that somehow, so I'll close this thread.
Hypothesis of solution:
Simply run my test code and see what you can find on the status of the wifi adapter and striking http test applications. Joanie helps you.
-
WRT54G - Internet connectivity failure - everything seems to work, but not online
I have a WRT54G V8 router, who is 18 months old. Its used by 3 laptops to connect to the Internet (Wi - Fi all). All 3 laptops unable to connect all of a sudden. Steps are taken to solve the problems, still no luck. Please suggest if something else can be done.
1. first test was to remove the router and connect a computer directly to the modem via a LAN comcast cable. Internet is available
2. I have hard reset the router and configured again. No luck
3. check the connectivity to the Internet through ports 1 to 4, no luck
4. I can see the available signal and connect to the network, but not internet connection. I see the cell as shown (all dynamic) IP address obtaining
5. I upgraded the firmaware to 8.0.6 version and and not set up once again, no luck (same as step 3 & 4)
6. removed the WEP security, does not
7 soft reset on the router (via the admin page reset to factory settings), no luck
LED status
Power - on and yellow
Cisco - on
WAN - SUITE
Internet - ON and flashing
Lights of port - when a laptop is CONNECTED
I see the excellent signal strength and all laptops can connect to the network, but cannot go online. Google chrome shows a message hosting "solve" until timeout. Laptops show a 192.168.1.XX IP address. 4 ports are also not connect to Internet (mobile one GETS IP address via the ports as well)
I have no other options left. I've seen a similar thread here (http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&message.id=2288), but no response. Please suggest what to do next.
Okey, I finally found the problem. His Modem.
Router is not able to get the IP address of the modem if the modem is started first and then I plug the internet cable to the router. But if I keep the router and modem connected and then reset the modem while keeping the router powered on, the router receives an IP address.
And in both cases, if I connect the laptop with the modem directly, computer laptop can connect to the Internet.
I bought a new router (WRT54G2) thinks that the problem is with the router, and I can reproduce the same behavior with both routers constantly.
Make sure you modem is Motorola surf.
-
USB stick detected and works but not displayed in the computer
I am running windows 7 Professional. Any drive USB storage that I connect to my laptop is not in the computer. He is awarded a legitimate drive letter and I can access content drive by typing in the drive letter in the bar of navigation or term. I checked using the disk management utility. Operations on the work of perfectly good files. The only issue here is that the reader does not appear or is hidden in the computer. I put the folder options to display everything, IE. no possibility to hide whatever it is has been disabled. In addition, when you click the remove safely icon in the status bar, the device is listed as «...» "instead of real name and the ring road. Note that there is a user account that is my administrator account.
Interestingly, I have created a new standard user account and was able to see the USB into the computer when it is connected to this account. Is there any setting I can change on my admin account to enable this? I would prefer not to have to create a new account and reconfigure all my settings.
Hi VJ17,
It could be that your user account has been altered. See the following article:
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
Hope this helps
Debra
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
I just install my HP PSC 2410xi Photosmart all-in-one for IP printing via my new usaing Asus RT - 16 Wireless Router the router USB 2 connections, and it prints perfectly for my custom pc company installation Windows 7 64 ultimate.
But I can't get either Windows "Fax and Scan", "Digitization management", or my image of 3rd party software to recognize the flat bed scanner with this installation, because there seems to be no separate "Device" option that can be selected for the parameter of the intellectual property of scanning, only for the "HP psc 2400 series", than Windows easily reconizes for direct installation of USB device , "offline".
Also, if I try to select the option of "HP psc 2400 series" IP for scanning with my 3rd party software, and any choice of Twain and WIA driver is grayed out, so it can not create the profile in order to USE the scan function. And try to create a port separate Windows for the scanner function only, using the same IP address, only you will get an IP conflict problem, not creating a separate port works, anyway.
Is there a way to get the dumpster to function to work through my router IP to analysis, or will I have to change my USB cable from the router to my pc using the offline option USB hub, whenever I need to analyze something?
I must point out, that I still have to use the popular tomato, DD - Wrt, or Firmware of Merlin for extras, as a newbie, I just use the official Asus Firmware (last updated), for now. Thank you.
Hey @technosey,
Welcome to the HP forums!
I see that you are having problems with your PSC 2410xi scanning on your Windows PC. I can help with that.
First of all, I see that you have the printer plugged into a USB port on your router. Which can cause a lot of problems and it would be better to plug directly into your PC. Once done you will add a printer via a local connection, rather than via a network connection.
Then, using this printer on Windows 7 Enterprise is going to be difficult because there is no driver available for this operating system. I found a document but that can help you troubleshoot. Install your printer using the Windows built-in driver
If this information helped you to scan then please let others know by clicking on accept as a Solution.
I hope this helps and I hope you have a great rest of your day!
-
I tried to clear my history, cookies and everything else on Firefox, but it does not solve the problem.
Whenever I try to comment on a post on facebook it says "Unable to display the comment." And it wont let me as any positions either.
Google Chrome works perfectly with Facebook. I don't want to quit smoking using Firefox, but unless I get soon a solution that may be what I have to do.
I recently got my Facebook working again when I disabled my extensions at the same time. It was a mistake, but because by then, I didn't know what could be the cause of the problem. After activating one by one, do the reboots needed, etc, I noticed that the only time where Facebook will not load my messages or I would like / comment is when the Plugin of effective Community measure 3.1.0 (by effective measure Pty Ltd) is enabled. I thought that perhaps similar plugins or products of the same manufacturer are not compatible with Facebook and Firefox 17. IDK.
Bottomline is: there is an extension/plugin that went rogue. There may be more.
Maybe you are looking for
-
I had to do a system restore, now when I click on Firefox, a window pops up saying could not load xpcom. How can I fix it? I'm on my iPad cannot open my computer, please help, thanks Cheryl
-
iCloud Mail disastrous deletion after expiration of the credit card?
My iPhone is saved in iTunes to my computer completely regularly - I do not think about iCloud as a significant storage system or back up. iCloud is only useful for me to sync email/contacts etc which is, I'm never bothered with backup photos or othe
-
Sign tiny function on the calculator of Windows fonts (. + - *)
The Windows Calculator, function keys fonts are almost microscopic. The sign is not much bigger than the tiny period. Similarly for the + and * function of signs. For 20 years, I had to squint and peer closely at the screen when you use the Windows
-
Also, when it is open, it keeps dominant control of pc by making the application active every few seconds. If I go into another window it comes down soon to WMP as the active application. This is a new computer. He did not at first, but began to ar
-
I'm using wondows mail in windows vista, I created some folders under the folder spam I deleted by mistake, is option there anyway, I can recover those email folders?