HP Pavilion HPE h8-1000z PC - weird noise internal Hum at startup...

Similar Questions

• HP Pavilion HPE h8-1111: Deffective WLAN Card

  I've had a few confusing issues with my internet connection for a few weeks now:

  My computer seems to detect wifi networks (they appear in the Network Manager), but fails to connect because of an unknown factor.

  Basic troubleshooting informed me that wifi wasn't the issue (other devices could connect to) and it turns out that my computer could sometimes reconnect by mmee after a few hours (weird right?)

  This time it does not resolve itself. I tried to update my WLAN card through my laptop adapter, so the drivers via a USB key. Nothing worked (maybe bad drivers?) I've tried a few)

  My network card is a mini Broadcom 802.11n using magnetic antennas of the card. (youd cloth found in a laptop essentially...) I have little or no knowledge more than I could translate from the web on this kind of hard\software. I am at a loss.

  [Also, I've seen a few threads recommending the driver intel update of software, but it needs a connection to work its magic...]

  Hi @arnaud34,
  
  Welcome to the Forums of HP Support! I understand that you have problems with your wireless connection and I'm happy to help you.

  Is that something WLAN adapter that you added or the original map?

  The Support page and drivers for your computer model: PC desktop HP Pavilion HPE h8-1111

  I would recommend that you try the following to see if you can get a stable connection. If at the end you still have nothing so it may be that the card is bad, and a replacement is necessary.

  Troubleshooting your wireless network and Internet access (Windows 7)
  
  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Forget the network: (Windows 7)
  1. press start.
  2. tap manage wireless networks, click on the application at the top of the start menu.
  3. right click on the network, and then click on remove network.
  4 confirm the warning by clicking OK.
  
  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.
  
  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.
  
  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

  Please let me know how it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Very high speed of the HP Pavilion HPE h8-1120une fan

  Hello!

  I got a desktop computer HP Pavilion HPE h8-1120une for about 2 months now and he was executed brilliantly (Windows 7 64-bit).  This morning when I turned on, the computer was much stronger than usual.  Installed the latest BIOS and F10 had started to see that the speed of the CPU fan 4500 rpm and the system fan speed 2500 RPM.  This seems quite high.

  The noise is obviously a bit annoying! Any ideas how to solve this problem would be much appreciated!

  Cheers, Davo

  Hello

  First try this procedure .

  Use a can of compressed air to blow the dust out of the heatsink from the CPU, although with a cold PC it might not solve the problem.

  Try to clear the CMOS memory.

  You might consider trying the B key over the Windows key, and then press the power button.  This could the bios image backup pickup if it is stored on the PC.

  Contact HP support and ask the ROM/BIOS recovery procedure. Recent HP PC will store a backup of previous BIOS level.  HP support number is 800-474-6836 or 800-HPINVENT or online here.

• HP Pavilion HPE h8 - 1070t CTO need case fan

  HP Pavilion HPE h8 - 1070t CTO, product number: LP028AV #ABA

  After an error message, on the fan and case fan noise I replaced the AVC DS09225R12MC234 DC 12V case fan 0. 3A with a Startech.com FAN9X25TX3H case fan.

  A program to monitor I have shows an increase in rpm of the system another fan. I'm trying to find out if my new fan is correct or adequate propper case fan.

  Hi checkit, as long that all fans are working and they doesn't make unusual noises or work allways on the maximum RPM is fine, Adi.

• Processor and fun of rear cooling fan runs at full speed on Pavilion HPE h8-1120it

  Hello, since yesterday when I turned on my HPE h8-1120it HP Pavilion the CPU fan and rear fun cooling are always rotating at high speed, and they never stop. I have nothing no hardware changes, no change in software. Two days I will I work all day without problem, I turn off as usual the PC, I'm going to bed and then yesterday morning I turned on and now I have this problem. The PC is brand new (I bougth it about 1 month ago). There is no problem of temperature (now I 19 ° C on my computer room).

  Read another similar post I figured might be a bios problem. The version of the bios is 7.11, I tried to see if there is an update of canno't ' t there, but I find an update of the bios for Pavilion HPE h8-1120it.

  I burned a CD with the hardware HP Vision Diagnostic and I run the pleasure of tests and they all passes. During these tests, the pleasure seem to achieve the right speed in the progress of the test.

  I noticed this strange thing: when I bought the PC I immediately activated in the bios the use of VT to use hardeware virtualization with VMWare player. Yesterday, I found this setting changed and disabled and it's very strange because I did not change the values in the bios.

  What can I do? The noise of the fans at full speed is impressive, that I can't work on these conditions!

  Thank you

  Davide Angeli

  Hello

  There are not many fans rated at 4 000 rpm. With this type of fan RPM coupled with your observation that VT missing then your PC seems to have a problem.

  Maybe it's time to contact the HP Support.

  HP support number is 800-474-6836 or 800-HPINVENT or online here.

• Fan brand new Pavilion HPE h8-1120une System (case) is much too loud

  Hi all

  Just received delivery of the new Pavilion HPE PC.  Turned on the PC and the fan is way too noisy.  Applied just latest Bios Rev 7.12 and took a look in the Bios and can see the system fan speed is constantly running a little over 4000 rpm and the CPU turns fan I think a little over 2000 rpm, there are no adjustable parameters for the thermal options.

  The system fan is the noise, the power supply fan is not yet noticeable.

  Any ideas how to solve this problem would be much appretiated.  I'll try to call HP support tomorrow and see what they can do...

  Model No.: h8-1120une
  Product #: QU296AA #ABG
  Serial No.:
  Software update #: 11AP3MRW604 #SABG #DABG
  Service ID #: 060-212
  PCBRAND: HP

  Laptop HP ENVY 17-j005tx, HP ENVY 27 - k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server tilt, HP MediaVault 2020, HP ENVY 120 AiO Printer

  This problem has been solved, solved by simply moving the PC in den where I wanted to put in place, and then he moved to my study! I have absolutely no idea why this has solved the problem. My guess is maybe the power cord or the video cable * HDMI) were not properly connected or the plug in the living room playing place... in the cher, is now resolved.

• iPhone 7 weird noise ticking after sending message sound

  Hello

  I use an iPhone 7 for 4 days now and yesterday, I, after I send a message (using iMessager, Wechat or Whatsup), I started noticing a sound weird/click tick immediately after application. That weird noise resembles a small distortion in the enclosure which happens after some noise is played.

  Did anyone encounter the same problem?

  Thank you in advance.

  Best regards

  Ricardo

  Same here, but also after taking a screenshot. Shortly after the sound of the camera.

• Pavilion HPE H9-1130: install the firewire card correctly into the slot of the motherboard correctly

  Hello, for my HP Pavilion HPE H9 1130, how to install the correct firewire in the motherboard slot card OK in OS Windows 10 x 64 / x 64 processor? And what video software system can I download to recognize my Panasonic 100a camera AX?

  Thank you. Followed your instructions. And it worked perfectly. Thank you. Even if I have Adobe Prem Pro, I downloaded MS Director and put 9 drivers after installing the PCIe card. Then it worked perfectly to capture video from a FireWire camera. Thank you once again!

• HP pavilion hpe h8-1020: evga geforce gtx 950 in hp pavilion hpe h8-1020

  Hello guys I have a hp pavilion hpe h8-1020 and I am looking to upgrade to a nvidia gtx 950 is it compatibile, what I need to supply?

  Hello

  There is a unknown specification for your motherboard that will prevent you from installing a new 3.0 PCIe x 16 graphics card. Maps 3.0 is backward compatible with PCIe x 16 2.0 slots. Your motherboard may have a PCIe x 16 1.0 slot. None of these options below works on your PC if you have PCIe x 16 version 1.0

  The Radeon HD 6570, an option to purchase, is a PCIe x 16 card USB2.0. You can have a 2.0 slot. It is unclear when we look at the characteristics of HP for your PC.

  I got a HD 6570. You could not install drivers from AMD with the version of HP of this card. You need to use the HP drivers. It is possible that this card is not a 2.0 card even if the consumer version is a USB2.0 card. We can only guess.

  MSI is rolling out hybrid Nvidiacards soon. Try anything tangible yet seen. NVIDIA is slowly releasing the 1000 series cards that require less power. Maybe some OEM will also include hybrid versions that will work on your PC any time.

  The 900 series Nvidia graphics cards need the UEFI BIOS.

  Your PC has a legacy BIOS.

  You have a 300 Watt power supply. You will have to upgrade from food to run a card AMD and respect the strict minimum if you can install a TG 640 GDDR5 map.

  You may be able to install (you need a PCIe x 16 slot 2.0) Nvidia 600 series cards or watch hybrid of AMD cards by Sapphire.

  AMD cards are longer and require larger power supplies.

  You should check that you have the power and the room to install two graphics cards. The cards are also double slot. You will need to verify that you can install a card double slot. Even once, you need a PCIe x 16 slot on the motherboard 2.0.

  See you soon!

• HP Pavilion HPE h8 - 1380t CTO: compatibility problems, ask questions about knitting-by-turn or possible motherboard replacement.

  I recently baught an EVGA GTX 1060, as this 630 became quite long in the tooth and I thought that I would try to future proof myself a little as the rest of my components seem to be working very well.  However, I can't get the map to work correctly on this particular computer.  Oddly enough, I can get past that screen startup finally after several short beeps and let it sit, but it takes fowever to reach the office and clearly is not executed properly that the resolution is wobbly and software from Nvidia cannot even detect the card.  I guess I had got this far because of the onboard graphics of some sort, but AFAIK this motherboard which lacks.

  I know that the card works fine as I tested it in my other Tower, so I struggled to find a solution.  So far, it seems that the problem is most likely the motherboard, as HP does not have a new BIOS for it since the beginning of 2013 (which I did go ahead and install it).  If true, I find myself with either two options, it seems that the ditch system, entirely or find a motherboard that works with all my old components.  I'd rather not have to empty this workaholic, when all other parts work great, if it is not a work around I would like to know if there are motherboards I could pass that would work with the rest of my components.  Normally I would not bother with even apply for, but I hear a lot of chatter on HP PCs pre-constructed having compatibility problems.

  I bought this computer there is in the case of four years that I would be able to update as I do with any other PC, but I didn't know at the time that HP has a tendency to not update the BIOS settings for anything beyond a year which I admit is incredibly frustrating.  What is done is done however, and I want to make this work without having to clear the entire system.

  Desktop HP Pavilion HPE h8 - 1380t CTO

  Model #: B4J28AV
  Serial number: 2MD2290502

  Motherboard: 2ACE "Pittsburgh" Pegatron Corporation

  Processor: Intel Core i7 3820 3,60 GHz 'Sandy Bridge - E.

  RAM: 10 GB of DDR3 memory

  GPU (stock): Nvidia GeForce GT 630 (this is replaced by the EVGA GTX 1060)

  @Faver, welcome to the forum.

  Your problem is the BIOS.  However, it is because the 1060 GTX requires UEFI in the motherboard instead of a standard/Legacy BIOS.  HP didn't start using UEFI until mid-October 2012.  The BIOS may not be upgraded in the UEFI.  The last cards only not for UEFI were the GTX 660/670.

  MSI made cards with a switch that can be used with a Legacy BIOS or UEFI.  If you decide to go this way, you must contact their Technical Support to help them choose the best card for your system.

  The upgrade of the motherboard can be a problem.  HP has taken advice their specifications.  Therefore, they are not necessarily the same as the commercial versions.  Please make sure that the holes in the motherboard matches the accessory in the case.  In addition, some members have had problems with the connectors in the connections case before, for example, the power button.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Weird noises near the processor on Satellite M40

  I have a laptop Satellite M40-243, I sent it to the service under warranty for a graphic display problem.
  He came back yesterday, now it works well, but the processor emits weird noises.

  Warranty service is unwilling to fix this because "there isn't any disfonctionnementsa!?

  Listen to these sounds: http://yang69.evoconcept.net/sounds/bruitsproc.mp3

  Is this normal?
  I think that no.

  (Sorry for my bad English :)

  This is definitely not normal and you should contact service again as soon as possible. I put t know what it may be exactly, but this is the case for the service.

• HP Pavilion HPE h8-1234: upgrading the 7450 Radeon HD Nvidia GeForce GTS 450

  http://support.HP.com/us-en/product/HP-Pavilion-HPE-H8-1200-desktop-PC-series/5187019/model/5231572

  I would like to replace the default Radeon HD 7450, which was built in desktop and replace it with a Nvidia GeForce GTS 450, my question is, is it compatible with my motherboard? Everything in the desktop computer is the same, except that I replaced the power supply with a Corsair CX600. As is all other compatible with the motherboard Angelica 2 graphics cards? Thank you!

  Shadgam, welcome to the forum.

  New after the 640 GT video cards require UEFI in the motherboard instead of the standard BIOS.  HP didn't start using UEFI until mid-October 2012.

  I see no reason why the GTS 450 (see card) is not working on your computer.  Your motherboard has a PCI Express x 16 (Gen.2) slot.  You can always call the manufacturer's Technical Support to make sure the card you have chosen will work.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• My Pavilion HPE h9 - 1120t Phoenix Bios does not display Options for virtualization technology

  I have a Pavilion HPE h9 - 1120t Phoenix with Intel Core I7 - 3770 k and Windows 7 Professional 64-bit operating system.

  I checked that my CPU indeed does support virtualization technology, and it does according to Intel. However, when I try to run a 64-bit VM in VM Ware player, I get this message: "the host is capable of VT, but VT is disabled.

  When I checked the BIOS to enable VT, I have been unable to find a setting for VT option can I update the BIOS to use VT?

  Hello:

  Have you checked in the Security menu Security / Unit of material?

  This is where the adjustment would be if she has one, and it is disabled by default.

  Paul

• Pavilion HPE h8 - 1360T: Max RAM per slot (4 locations)

  I'm upgrading RAM on my 1-1/2 year old h8 - 1360t.

  On the page "Product Specifications and configurable Options" (http://h20564.www2.hp.com/hpsc/doc/public/display?docId=c03425388 & DocLang = in & docLocale = en_US & jumpid =... , under Hardware Options - memory, it says "must select one of the following options:...") 16 GB (4 x 4 GB) PC3-12800 DDR3 (PC3-10600 on this system turns)' (the only 16 GB option - maxed out for WIN7 64 bit).

  In addition, in the support page "HP Desktop PCs - the upgrade memory (RAM)" (generic - non-specific to any model) (http://support.hp.com/us-en/product/HP-Pavilion-HPE-h8-Desktop-PC-series/5258496/model/5261720/docum, under "Verification of the quantity of memory can be added to your computer model", it says "to find the amount of memory per slot, divide the maximum amount of memory that the computer can hold by the number of memory locations of the motherboard. Usually, this is the maximum amount for each type of memory. For example, if the computer is able to contain a maximum of 4096 MB (4 GB) memory and the motherboard has four memory slots, install 1 GB (or less) per slot. »

  When I check the options of 'Memory' on www.crucial .com, the only 16 GB option it gives is 8GBx2.  Can I do trust what is Crucial says about it (which seems to contradict what the HP options & specifications page)?  I think that the answer is Yes - that HP doesn't care. and options page is just saying how it would come if I had ordered with maxed out at 16 GB RAM - but thought I would ask before ordering memory.

  Thank you for responding to this.

  I dug a little further on the Crucial site, and it seems that the 8GBx2 actually works:

  Recommended for my computer:

  

  And here's the review of one of the examiners:

  

  The reason, I was a little skeptical about what the HP standard sheet said for the computer I had before this one, HP said a certain maximum size of RAM (below what the operating system should be able to manage).  There was a post on the HP forums who said you could use the larger RAM size (until the operating system can manage) in this model computer.  I tried and it worked fine.

• HP Pavilion HPE h9 - 1120-t Phoenix - PC suddenly starts turning Off after a few Minutes of use

  Posted this on the Forum for questions of another office before I reduced the problem.  No one answered:

  http://h30434.www3.HP.com/T5/other-desktop-PC-questions/HP-Pavilion-HPE-H9-1120t-Phoenix-PC-suddenly...

  Announcing this computer from July 2012 and not even a hiccup.  4 days, the computer suddenly began turn power off. It doesn't stop, it turns off, the plug was pulled. When I reboot I get the message of abnormal termination of Windows.   There is no warning at all.  No message as the computer is overheating.  He comes to occur when the computer is idle without programs will open.

  When it stops, the power supply unit light goes out for a minute then comes back on the 'green' and the computer can be restarted.

  I unplugged the power cord and relugged and it seems fine.

  The computer is aware of the updates of Windows and can be stopped normally.

  I removed the cover and clean the dust and confirmed all fans are running properly.  I left the lid off the coast, and the computer stops again.

  I must add that when the computer is started 'cold' it runs about 15 minutes.  If you restart after it just closed, you have maybe 3-5 minutes of use.

  Why did you think it was overheating.

  Any ideas?  Thank you.

  Specifications of the computer:

  What thermal paste on the processor?

  There are two programs, you could download to monitor the temperature of the CPU

  Speccy free:

  http://www.Piriform.com/Speccy

  or Core Temp

  http://www.alcpu.com/CoreTemp/

  Another possibility is a PSU fault

  http://ryansccs.HubPages.com/hub/how-to-tell-when-computer-power-supply-is-failing