HP Pavilion HPE h8-1100: motherboard for h8-1100

Similar Questions

• HP Pavilion HPE h9-1100 Phoen: computer hangs during startup after installation of 970 GTX

  The problem:

  So here's the deal. I bought a new EVGA GTX 970 and installed in my office (after you have uninstalled the drivers for my old AMD GPU). When that I start it freezes on the BIOS screen. Press a button and the screen goes black; It is still frozen. Fan works in beast mode, until I turn it off.

  What I tried:

  • I checked for if sure it was well installed in the x 16 PCIE slot and connectors double checked.
  • Checked to see if my motherboard supports UEFI (it does)
  • Using another monitor using vga instead of as before display port.
  • EVGA called and suggested they updated my BIOS on HP site (I think I'm already on the latest version)?
  • Called HP and they said I have spend $250 to have a technician to work on it. (I'd rather not pay nearly as much as I paid for the card to install it if I can avoid...)
  • Remove the battery on the motherboard for 5 minutes then replace and powered with the new graphics card.

  None of these things had No effect. (with the exception of the money payer which I have not yet made). I put the old card (Radeon 7670) back in and it started late.

  I'm kind of grasping at straws at this point. Any help would be greatly appreciated.

  Model: h9-1100 (A5U16AV #ABA)

  OS: Windows 10 Pro (64-bit)

  Motherboard: Gigabyte 2AC8 (970 (RX980) + SB950 chipset AMD)

  Processor: AMD FX-8150 (3600,0 MHz)

  BIOS: Ang_716 (05/04/2012)

  I would like to know if there is relevant information, that I left out.

  -edit

  I tried to install the card in HP h9 1300 t friend (he also recently installed the same card) it worked fine, if the card is not defective. Then we installed his gtx 970 in my computer. Same results as before. Startup freezes on the bios screen.

  Sure that I narrowed down it to a compatibility problem with my motherboard. I ordered a new one, the ASRock 970 M Pro3 AM3 + / AM3 AMD 970 + AMD SB950 6 x SATA 6 Gb/s USB 3.0 Micro ATX AMD Motherboard (bite). I'll post here once again with results once it arrives here in a few days. I cross my fingers.

  Hello

  The level of the BIOS of your PC is not compatible with the video BIOS in the NVIDIA GTX 970.   You need a BIOS to version 8 HP which is not displayed for your PC.

  BTW - A replacement of the card mother not HP will require a new license of Windows.

• HP Pavilion p6-2481eo: new motherboard for HP Pavilion p6-2481eo

  What type of motherboard fits into this model? I screwed the old a. Thank you.

  THIS PAGE displays the motherboard.  It lists as Μatx: 24.4 cm (9.6 in) x 24.4 cm (9.6 inches)

  It takes a FM2 processor.  Don't forget not that if you replace a motherboard non-HP Windows will probably no longer work, and a new will need to be installed.

  It is possible to buy a card mother HP for this model directly replace the failure.

• HP Pavilion HPE h9-1100: Installation of the graphics card... Screen is not displayed. NEED SERIOUS HELP!

  Hi, so I recently got a new "XFX Radeon R9 285" graphic card PCI - E 3.0 and installed in my PC, I went to start it and the screen does not light. The PC boots, the fans run and everything just no display. It works with two other Radeon PCI-E graphics cards, but it does not start. 285 graphics card works in another computer, but will not work on this one. I tried to uninstall the old graphics card drivers and no luck.

  Motherboard: Gigabyte M3970AM-HP (Angelica)

  Model: 2AC8

  Supplier of chipset: AMD

  Chipset model: RD9x0

  CPU: AMD FX-8150

  PSU: 600w

  RAM: 10 GB

  ORIGINAL OF THE GRAPHICS CARD: RADEON HD 7600 SERIES

  OTHER MUCH OLDER BUT WORKS

  Thank you for the additional information.

  Since you had the card running in another computer, you must have connected the two power connectors 6 pins.

  If it were me, I would XFX Service contact customer (800-880-3225) to see what they have to say about your problem.  It may be a BIOS problem.  They need the specifications of your computer.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• HP Pavilion HPE: Ability to upgrade the video card

  Hi I have a desktop HP Pavilion HPE h8-1100 AMD Angelica with a 300w power supply. The current map graphic is a Radeon HD 6450.  I want to upgrade to the best game card that my pc will support.  Any help and options would be greatly appreciated. Thank you much Happy New Year!

  Hello

  Looking for an opportunity 660TI GTX.  A CX600 Corsair or CS650m would be a good choice for a power supply.

• Pavilion HPE H9-1130: install the firewire card correctly into the slot of the motherboard correctly

  Hello, for my HP Pavilion HPE H9 1130, how to install the correct firewire in the motherboard slot card OK in OS Windows 10 x 64 / x 64 processor? And what video software system can I download to recognize my Panasonic 100a camera AX?

  Thank you. Followed your instructions. And it worked perfectly. Thank you. Even if I have Adobe Prem Pro, I downloaded MS Director and put 9 drivers after installing the PCIe card. Then it worked perfectly to capture video from a FireWire camera. Thank you once again!

• HP Pavilion HPE h8 - 1380t CTO: compatibility problems, ask questions about knitting-by-turn or possible motherboard replacement.

  I recently baught an EVGA GTX 1060, as this 630 became quite long in the tooth and I thought that I would try to future proof myself a little as the rest of my components seem to be working very well.  However, I can't get the map to work correctly on this particular computer.  Oddly enough, I can get past that screen startup finally after several short beeps and let it sit, but it takes fowever to reach the office and clearly is not executed properly that the resolution is wobbly and software from Nvidia cannot even detect the card.  I guess I had got this far because of the onboard graphics of some sort, but AFAIK this motherboard which lacks.

  I know that the card works fine as I tested it in my other Tower, so I struggled to find a solution.  So far, it seems that the problem is most likely the motherboard, as HP does not have a new BIOS for it since the beginning of 2013 (which I did go ahead and install it).  If true, I find myself with either two options, it seems that the ditch system, entirely or find a motherboard that works with all my old components.  I'd rather not have to empty this workaholic, when all other parts work great, if it is not a work around I would like to know if there are motherboards I could pass that would work with the rest of my components.  Normally I would not bother with even apply for, but I hear a lot of chatter on HP PCs pre-constructed having compatibility problems.

  I bought this computer there is in the case of four years that I would be able to update as I do with any other PC, but I didn't know at the time that HP has a tendency to not update the BIOS settings for anything beyond a year which I admit is incredibly frustrating.  What is done is done however, and I want to make this work without having to clear the entire system.

  Desktop HP Pavilion HPE h8 - 1380t CTO

  Model #: B4J28AV
  Serial number: 2MD2290502

  Motherboard: 2ACE "Pittsburgh" Pegatron Corporation

  Processor: Intel Core i7 3820 3,60 GHz 'Sandy Bridge - E.

  RAM: 10 GB of DDR3 memory

  GPU (stock): Nvidia GeForce GT 630 (this is replaced by the EVGA GTX 1060)

  @Faver, welcome to the forum.

  Your problem is the BIOS.  However, it is because the 1060 GTX requires UEFI in the motherboard instead of a standard/Legacy BIOS.  HP didn't start using UEFI until mid-October 2012.  The BIOS may not be upgraded in the UEFI.  The last cards only not for UEFI were the GTX 660/670.

  MSI made cards with a switch that can be used with a Legacy BIOS or UEFI.  If you decide to go this way, you must contact their Technical Support to help them choose the best card for your system.

  The upgrade of the motherboard can be a problem.  HP has taken advice their specifications.  Therefore, they are not necessarily the same as the commercial versions.  Please make sure that the holes in the motherboard matches the accessory in the case.  In addition, some members have had problems with the connectors in the connections case before, for example, the power button.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Pavilion HPE h8 - 1380t: video card upgrade for Pavilion HPE h8 - 1380t

  Hi all

  I recently bought a map GTX1060 (from a MSI GeForce GT640) 4 year old GPU from nVidia in line in order to improve the capacity of my machine so that I would be able to play Fallout 4 and 3 Witcher (both put my poor old GT640 kneeling - even on lower resolution settings).  It is part of the case and the powers that be (Yes, I plug in the connector 6-pin PSU) and 600W POWER supply is adequate for the task, but I'm starting to think that I probably have a motherboard compatibility issue.

  When I install the card and turn on the PC, it hangs at the splash screen of installation (a common problem from what I've already read on these forums) and that it goes no further (keyboard and mouse do not respond at this time here).  I contacted the nVidia support, and they suggested some changes to the BIOS (disable Secure Boot, activate the Legacy/MSC Mode and switching between legacy and UEFI BIOS selection Mode), but when I access the HP configuration utility (F10 on boot to top with GT640 card installed), these options are not put at my disposal.

  Is it possible for me to access the BIOS settings that nVidia has indicated I should be adjusted?

  This GPU card simply is not at all compatible with my motherboard?

  System Specs:

  HP model number: B4J28AV #ABA (Pavilion HPE h8 - 1380t)

  Motherboard: Pegatron 2ACE(Socket 0); 1.08; Intel Sandy Bridge-E Rev. 07; Intel Southbridge X 79 Rev 05

  BIOS: FRIEND 7.15

  CPU: Intel Core i7 3930 K (3.2 GHz)

  OS: Windows 7 Professional 64-bit, SP1

  Current GPU: MSI GeForce GT640; Driver 10.18.13.6881

  If the GTX1060 is not compatible, which is the highest card GPU nVidia performance that can be used with this motherboard (given the limitation of power supply 600W)?

  Is there another motherboard for this machine which would be compatible with my existing CPU and the GTX1060?

  Thanks for your help...

  Hello

  The h8 1380t has a Pegatron motherboard 'Pittsburgh '.

  You could try to find a future revision of this motherboard. I'm also a 810-150se with a map of the 'Pittsburgh2' system that has UEFI. I use a card Nvidia GTX EVGA FTW 970 with excellent results.

  You will need to check that the Review Board would fit in your frame.

  The other options are:

  1.new want to expedition with Win 7 Pro, or

  2 falcon Northwest.

  In a map of the main current system the permutation of Asus, Gigabyte or Asrock is difficult at best. You have to change other components such as the processor, heat sink, fan and the memory. You can probably buy an OEM of Windows 7 Pro version.

  It becomes quite expensive when you do the math on all of the changes you will have to do. There is no guarantee that you can find a map of the main current system having the correct spacers for your chassis h8 - 1380t.

  Avoid a Skylake processor if you can unless you don't mind jumping through a few extra hoops to install Win 7.

  Please consult this article and go here for the workaround resolved the problem installing win 7.

  Jay

• Pavilion HPE 440F: need new video card for HPE-440F

  Salvation;

  The ATI Radeon HD 5570 in my Pavilion HPE 440F appears to be dead, or is doing. The fan has stopped working and I think the map has overheated.

  I'm running Windows 7 x 64.

  Anyway - I would like to install a new card - and best video. It is, since it is HP, I bet that not all cards are compatible with my system.

  For example, I can buy an ATI Radeon SR-290, which gets much higher than my current card pass mark. Or maybe even a NVidia card might be a better value for the money.

  Can someone point me to a list of compatible video cards for my system?

  Thank you

  Ubuntu_Kid

  p.s. My Linux box is not an HP.

  Ubuntu_Kid, welcome to the forum.

  The problem you are having is, most of the newer video cards require UEFI in the motherboard instead of a standard BIOS.  HP didn't start using UEFI until mid-October 2012.  Your computer was released on August 26, 2010.

  Some of the manufacturers have developed a VBIOS that will allow their cards to work with legacy BIOS.  I know that the EVGA has done with some of their cards.  I suggest to call their Tech Support (1888-880-3842) to see if they have a card that will work with your computer.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Need drivers for my new HP Pavilion HPE ethernet

  Hello, I just bought a new HP Pavilion HPE desktop computer (3 days).  After that I got the first time I turned it on it only connected via the wireless network card.  I then did a clean install of windows 7 Ultimate edition (because I had it and it's better than home premium).  Well I can connect through the wireless card but want to connect with the ethernet.  The Device Manager shows SM Bus controller and Ethernet controller drivers are not installed.  I contacted HP support and they could not help, they said I have to do a full install HP operating system provided with the computer because they knew not where were pilots and no guarantee that would work.  The motherboard is made by IPMMB-FM.  I tried Google and found nothing.  I'm looking for help to find these drivers.  I'd appreciate any help that is offered.

  Possible breakthrough...

  While HP does not seem the W7 64-bit driver available (small oversite on their part), I think I have found a driver on the Atheros website.

  Go to the Portal client Atheros and select AR813x_AR815x_v2.0.14.15_WHQL or AR816x_v2.0.14.15_WHQL under the headings AR813x_AR815x or AR816x. They are in. RAR format, extract the driver by using WinRAR or similar!

  Frank

• My Pavilion HPE h9 - 1120t Phoenix Bios does not display Options for virtualization technology

  I have a Pavilion HPE h9 - 1120t Phoenix with Intel Core I7 - 3770 k and Windows 7 Professional 64-bit operating system.

  I checked that my CPU indeed does support virtualization technology, and it does according to Intel. However, when I try to run a 64-bit VM in VM Ware player, I get this message: "the host is capable of VT, but VT is disabled.

  When I checked the BIOS to enable VT, I have been unable to find a setting for VT option can I update the BIOS to use VT?

  Hello:

  Have you checked in the Security menu Security / Unit of material?

  This is where the adjustment would be if she has one, and it is disabled by default.

  Paul

• Maximum RAM for Pavilion HPE h9 - 1215t

  I have a Pavilion HPE h9 - 1215t (Core i7-3770 3.4 G 8 M 77 w CPU;) Card mother Formosa IPMMB-FM).  the system currently has 16 GB of ram (4 x 4).  Upgrades of what I can do and what dimm configuration?  Is 32 GB maximum for this system?  For example, you can swap 2 or the 4 GB DIMMs for 2 DIMMs of 8 GB each to make the total system 24 GB of ram?

  Hello

  Dave would work rather than Jim.

  I suspect that HP has fill not the 8 GB DIMMs in your PC model when it came out on the market, where the reason for not showing the configurations with 8 GB DIMMs.

  Mixture of DIMM may or may not work and I saw all the messages on this forum to indicate success or failure with the mix 8 GB DIMM sizes with your HP PC model.

  You could try buying two packs of two 8 GB DIMM if reallly you need more memory and see which combination works as appropriate.  You may need to go with 32 GB, but then you might face a decision of performance cost verses. If you can get 24GO to work then return the other DIMM package.

  Find out what the return policy is before you buy.

• Pavilion TS 15n-070sa: more fast motherboard for HP Pavilion TS 15n-070sa

  Product name: HP Pavilion TS 15n-070sa

  Product number: E7G63EA

  OS: Windows 10 (primary), Kali Linux Sana (2.0)

  Recent hardware changes: None

  Problem:

  Recently, I decided to upgrade my Pavilion TS 15n-070sa processor. However, I took soon a problem after having disassembled my hard drive, due to the fact the processor is soldered to the Board rather than just locked to it. Then, I got a glance in the maintenance and service guide, which made me think that the other portable Pavilion TS 15 could have the same shape of the investment just (perhaps) with a better processor and motherboard. However, I am still not sure of the fact that last and that's why I came here to ask where I could get a replacement and a better motherboard for my laptop.

  It would be the best motherboard:

  AMD A10 - 5745 M 8670 M 2.9 GHz/2.1 GHz (2 GB L2, 1333 MHz DDR3L Quad 25 W) for use with Standard Windows. 734824 501

  Here is the Service Manual:

  Repair manuals

  HP is out of stock.

  http://www.discounteddealz.com/product.asp?Itemid=327740&gclid=CIC4jIq6k8oCFQEcaQodVJ4BZA

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• How can I get a motherboard for a Pavilion dv6-3259wm?

  I can't get a motherboard for my machine.  How do I get there?

  slimss wrote:

  I can't get a motherboard for my machine.  How do I get there?

  Hello

  You should find the Manual:

  http://h10032.www1.HP.com/CTG/manual/c02659236.PDF

  Then locate the major components, description and computer see the reference number of the Law Commission. You have a laptop with a built-in onboard vga (UMA), then the reference is 595135-001.

  However, you could actually move the laptop to a dedicated vga ATI Radeon HD 6550.

  For use on computer models equipped with a graphics subsystem with dedicated memory and chipset HD 6550:

  631082-001. This requires a new heatsink:

  For use on computer models equipped with graphics subsystems with discrete memory 606575-001.

  This means that if you buy a different Board and a heat sink, you might have a better graphics card.

  Use ebay or google to find the best prices...

  http://www.eBay.co.UK/ITM/HP-Pavilion-DV6-series-laptop-motherboard-595135-001-595135001-AMD-/131183578553?PT=motherboards&hash=item1e8b268db9

• Pavilion HPE: Obtaining a recovery media for your desktop HP custom build

  I replaced my SSD drive failed in my HP Pavilion HPE I bought in July 2012 and seeks to
  do a system restore for a restoration of the value I created before the break.  I start the PC with the first DVD-R disk in the drive (by car I used for the set), press ESC to enter the boot menu, navigate to the Boot Menu to select the /SATA2 option Legacy Boot Sources/ATAPI CD/DVD Drive option.  The result I get is:

  "Intel UNDI, PXE - 2.0 (build 083)
  COpyright (C) 1997-2000 Intel Corporation
  For Atheros PCIE Ethernet Controller v.2... 1.9.9(08/12/11)

  Check the connection of the cable!

  PXE - M0F: Exit Intel PXE ROM.

  ERROR: no boot disk was detected or the drive failed. »

  The drive fail as failure.  I read on another computer very well (open files, view file properties, copy the folders and files).  For a smile, I put an old XP Recovery disk in the drive of the computer, I'm trying to restore and he was able to read that.

  Whatever it is, I try to order recovery disks by following the link on this page:

  http://h20565.www2.HP.com/hpsc/doc/public/display?docLocale=en_US&docid=emr_na-bph07143&sp4ts.Oid=52...

  This page asks me to provide a specific model number.  I don't have because it is a customized version.

  It's on my list of selection information:

  > YOUR
  > CUSTOM HP PC
  > h8t
  > • Windows 7 Professional (64 bit)
  > • 2nd generation Intel Core i5 2400 quad-core
  > processor [3.1 GHz, 6 MB cache]
  > • FREE 6 GB DDR3 1333 MHz SDRAM [2 DIMMS] UPDATE
  > 4 GB
  > • 1 TB 7200 RPM SATA hard drive
  > • No secondary hard drive
  > • SAVE $40 on Microsoft Office Home and Business
  > 2010
  > • No additional security software
  > • 1 GB DDR3 AMD Radeon HD 7450 [HDMI, DVI, VGA via a
  [> adapter]
  > • 300W power supply
  > • DVD SuperMulti burner
  > • LAN wireless-N (1 x 1) card
  > • 15-in-1 reader cards, 2 USB 2.0 (front), 2 USB
  > 3.0 (top)
  > • No TV Tuner
  > • Beats Audio (tm) - a built-in studio quality sound
  > • Premium HP keyboard and optical mouse
  > FREE • Adobe Premiere elements and Photoshop 10 [$149
  [> value]

  If I can't use the recovery set I did, how can I get a proper HP for my setup recovery disk?

  Hello

  A 240 GB SSD is large enough for the support of HP recovery work.  Order the HP support.