Maximum RAM for Pavilion HPE h9 - 1215t
I have a Pavilion HPE h9 - 1215t (Core i7-3770 3.4 G 8 M 77 w CPU;) Card mother Formosa IPMMB-FM). the system currently has 16 GB of ram (4 x 4). Upgrades of what I can do and what dimm configuration? Is 32 GB maximum for this system? For example, you can swap 2 or the 4 GB DIMMs for 2 DIMMs of 8 GB each to make the total system 24 GB of ram?
Dave would work rather than Jim.
I suspect that HP has fill not the 8 GB DIMMs in your PC model when it came out on the market, where the reason for not showing the configurations with 8 GB DIMMs.
Mixture of DIMM may or may not work and I saw all the messages on this forum to indicate success or failure with the mix 8 GB DIMM sizes with your HP PC model.
You could try buying two packs of two 8 GB DIMM if reallly you need more memory and see which combination works as appropriate. You may need to go with 32 GB, but then you might face a decision of performance cost verses. If you can get 24GO to work then return the other DIMM package.
Find out what the return policy is before you buy.
Tags: HP Desktops
Hey there ' All,.
I currently have the OEM 8 GB RAM installed. I run VMware Workstation 8 for a laboratory test on my laptop and I would really like to 16 GB of RAM, but it seems that I read a few places that this model is not expandable to 8 GB (which is funny because the model seems comes with 8 GB.) So much for an upgrade).
Before you buy 16 GB memory live, this laptop will support him?
I'm running Windows 7 Ultimate x 64 with a processor Intel 320 160 GB SSD (SSD is worth every penny, incidentally!).
I just ran the Crucial System Scanner to see what he had to say and he acknowledged my system like a HP - Compaq IdeaPad U450p Laptop/Notebook. This is not just, of course, but there may be a link any between the two I don't know. States crucial System Scanner:
Each slot of memory can hold DDR3 PC3-8500, DDR3 PC3-10600, with a maximum of 4 GB per slot.*
* May not exceed manufacturer supported memory.
Of course, the important part here, I've noticed, is that there is a maximum of 4 GB per slot because that's what HP is supported. Does that mean that the system will recognize even 16 GB and it will not support the HP? Could there be stability problems if I do? I'm looking for if I install 16 GB?
See you soon,.
According to the specifications of the system for your laptop, it comes with an Intel i7 processor.
Here is the link to the service manual for your PC.
There are two sets of specifications of memory depending on whether you have a processor AMD or Intel.
Since you have an Intel processor, you can install modules memory 16 GB (2 x 8 GB) in your PC.
Please see Chapter 1, page 6.
Crucial.com say the maximum RAM for my desktop HPE-130cs is 16 GB (4 x 4 GB DDR3 pc3-10600). However, can I push it successfully to 32 GB with 4 x 8 GB modules?
Here is the link to the product for your PC.
Maximum physical memory is 16 GB.
In addition, please note that even if you could go beyond 16 GB (which you can't), you must have windows 7 Professional or ultimate edition installed as windows home edition premium does not run to a maximum of 16 GB of memory.
What is the configuration of the maximum ram for a 2007 iMac 21,5 "
There is no such thing as a 2007 21.5-inch iMac; the 2007 iMac is all 20 or 24 inches. Click here and search for your model; the page it will say.
Can someone tell me what is the maximum RAM for the R31
Welcome to the forum!
Could you please send the model number of 7 characters of your R31?
Theoretically, 1 GB should be maximally to P3M units, but some Celeron machines have a slot already filled, that is why I ask the model number.
Good luck and let us know.
I have old a laptop Compaq Presario C700 initially provided with 1 GB of RAM and Windows Vista. This computer has since been updated for Windows 7 32-bit and upgrade to 2 GB of RAM. I checked Crucial site and he informed me that the maximum RAM for this computer is the 2 GB that I am currently. Despite this, I read the posts of people successfully 3 to 4GB of RAM installed and still having their computer function properly. I also read that the maximum RAM that can run on a Windows 7 32-bit system is 4 GB.
Since I now have Windows 7, I will be able to further improve my computer to a 4 GB of RAM or the hardware of the laptop itself prevents me to do?
The manual for a Compaq Presario C700 says on page 2 supports up to 2 GB of RAM:
With all computers, you have two factors limiting the amount of RAM memory that may be installed, or the motherboard, and the version of Windows installed. In your case, it is the motherboard that prevent you from adding more RAM.
Is there a maximum RAM that can be installed in my PC? I currently have 4.00 GB of RAM. If I am able to add more than 4.00, what should I buy?
2 SODIMM slots for memory
PC2-6400, 800 MHz, DDR2
Support for 8192 MB system memory
Memory ● 8192 MB total system (4096 MB x 2, dual-channel)
Memory ● 6144 MB (2048 MB × 1 + 4096 MB × 1) total system
Memory ● system total of 4096 MB (2048 MB x 2, dual-channel)
Memory ● 3072 MB (2048 MB × 1 + 1024 MB × 1) total system
Memory ● total system of 2048 MB (1024 MB x 2, dual-channel)
2048 MB total (2048 MB × 1) ● system memory
1024Mo system total ● (1024 MB × 1) memory
Your manual here.
I have a Pavilion dv7, QF272EA #ABD with 8 GB of RAM installed. Is it possible to increase the RAM 16 GB - what RAM Modules should I then? On official documents the maximum RAM is 8 GB, but at the time, documents were made, no 8 GB Modules were available.
The BIOS supports 8 GB Modules? The laptop has two slots, so my hope is, if I replace the built in 2 x 4 GB with 2x8GB, I have 16 GB of RAM.
For what I need it? Different virtual machines at the same time for running the job. :-)
I'm sorry for my bad English. Thanks for your help!
Your English is very good.
Since your computer laptop is the Intel processor, you can install 2 x 8 GB of memory.
You need PC3-10600 memory laptop. Make sure that it is 10600, not 10660 or 10666.
See the manual at the link below, Chapter 1, page 6, for the info of memory.
Now, several manufacturers of memory have produced memory 8 GB PC1333.
Model Pavilion dv6t - 3000 CTO Select Edition, Prod #VXO69AV, Intel Core i5 - 450 M (2.4 GHz with 3 MB L3 Cache) with Turbo Boost up to 2.66 GHz, 160 GB Solid State Drive Flash Module, 1 GB ATI Mobility Radeon HD 5650 switchable graphics, Windows 7 Ultimate. I currently have the original 6 GB of ram that came on the HP laptop, which includes a stick of 4 GB and 2 GB key.
I want to spend the maximum amount of ram and the ram for maximum performance (speed). Analysis of Crucial.com says I have 6 GB of ram and the maximum ram is 8 GB. He also says that I can buy one (or two) 4 GB DDR3 PC3-12800. CL = 11. NON ECC unbuffered. DDR3-1600. 1.35v. here is the link for the crucial scan and recommendations:
Here is a link below for my maintenance SE dv6t and Service Guide, with memory on page 70. The service guide references DDR3 PC3-10600 clocked at 1333 MHz.
Issues related to the:
The Crucial scan seems to direct me to the memory of better and faster that is listed in the Service Guide. My laptop took advantage of this Crucial memory to operate at faster speeds than the memory, I have now? What latency (CL) cases? I saw sticks to new Egg with CL = 9 instead of this Crucial CL = 11. CL is important? What I have to buy two Crucial 4 GB sticks or I can I keep my original 4 GB stick and add a Crucial 4 GB stick for my 8GB? Is Crucial memory memory low density -something I've read elsewhere that I need? FWIW, a diagnostic analysis of Norton said that my current memory is syncing to 1067 ns.
I have also these two links below for key USB PNY to a Best Buy nearby. The first stick of memory PNY seems to correspond to the Crucial memory card. Is - this low density memory PNY memory? And yet once, can I buy a single stick of 4 GB and add to my current 4 GB stick? This 4 GB PNY stick below which seems to fit the profile of Crucial scan is what I would buy if he tell you it's compatible, because I can buy it at a Best Buy near and easily return it if it does not work:
And here is the link to a second best buy PNY 4 GB stick whose plug appear to be closest to the Service of Guide specifications, but this stick may not be low voltage and it has less maximum MHz:
Thank you for your help and your recommendations!
Hello. I'll answer my own questions in the last post above. Fortunately, HP expert Paul Tikanen resolved my questions in a thread with the following response. Thank you, Mr. Tikkanen!
"The faster the memory will run in your laptop is at 1066 Mhz, which is the speed of the FSB of the i5 - 450 M.
So, my recommendation would be for you to buy a module of memory 4 GB DDR3 PC3 - 10600 (1333 MHz).
Thus, even the 1333 MHz chip will only work at 1066 MHz.
I had a lot of success with this configuration of brand and the memory chip.
Regardless of the brand you download, make sure he's 8 the little black chips of memory on each side of the Board, not 4.
I have a Pavilion DV6-6047ci with Windows 8 and 8 GB of Ram. Can someone tell me if I can expand this to 16 GB of Ram? If so, what kind of Ram?
DP - K
I recently bought a map GTX1060 (from a MSI GeForce GT640) 4 year old GPU from nVidia in line in order to improve the capacity of my machine so that I would be able to play Fallout 4 and 3 Witcher (both put my poor old GT640 kneeling - even on lower resolution settings). It is part of the case and the powers that be (Yes, I plug in the connector 6-pin PSU) and 600W POWER supply is adequate for the task, but I'm starting to think that I probably have a motherboard compatibility issue.
When I install the card and turn on the PC, it hangs at the splash screen of installation (a common problem from what I've already read on these forums) and that it goes no further (keyboard and mouse do not respond at this time here). I contacted the nVidia support, and they suggested some changes to the BIOS (disable Secure Boot, activate the Legacy/MSC Mode and switching between legacy and UEFI BIOS selection Mode), but when I access the HP configuration utility (F10 on boot to top with GT640 card installed), these options are not put at my disposal.
Is it possible for me to access the BIOS settings that nVidia has indicated I should be adjusted?
This GPU card simply is not at all compatible with my motherboard?
HP model number: B4J28AV #ABA (Pavilion HPE h8 - 1380t)
Motherboard: Pegatron 2ACE(Socket 0); 1.08; Intel Sandy Bridge-E Rev. 07; Intel Southbridge X 79 Rev 05
BIOS: FRIEND 7.15
CPU: Intel Core i7 3930 K (3.2 GHz)
OS: Windows 7 Professional 64-bit, SP1
Current GPU: MSI GeForce GT640; Driver 10.18.13.6881
If the GTX1060 is not compatible, which is the highest card GPU nVidia performance that can be used with this motherboard (given the limitation of power supply 600W)?
Is there another motherboard for this machine which would be compatible with my existing CPU and the GTX1060?
Thanks for your help...
The h8 1380t has a Pegatron motherboard 'Pittsburgh '.
You could try to find a future revision of this motherboard. I'm also a 810-150se with a map of the 'Pittsburgh2' system that has UEFI. I use a card Nvidia GTX EVGA FTW 970 with excellent results.
You will need to check that the Review Board would fit in your frame.
The other options are:
1.new want to expedition with Win 7 Pro, or
In a map of the main current system the permutation of Asus, Gigabyte or Asrock is difficult at best. You have to change other components such as the processor, heat sink, fan and the memory. You can probably buy an OEM of Windows 7 Pro version.
It becomes quite expensive when you do the math on all of the changes you will have to do. There is no guarantee that you can find a map of the main current system having the correct spacers for your chassis h8 - 1380t.
Avoid a Skylake processor if you can unless you don't mind jumping through a few extra hoops to install Win 7.
Sorry, I think that question maybe a lot of time, I just want to ask about W510 i7-720QM maximum RAM is 16 GB? Thanks for looking through and answer!
Maximum is 32 GB (4X8Go)
The amount of memory can handle a HP Pavilion 14-n218us.
The maximum ram you can install is 16 GB (2 x 8 GB Modules). Below an example of an upgrade on the following link.
DP - K
I want to update my RAM for my Lenovo Y460N, but I do not know the RAM max it can supports. Can someone advise me on this... COS of the user manual doesn't say RAM max... Thank you very much!
8 gb max7. PC3-10600 1333 mhz ddr33, no parity, two-channel capable, two sockets dimm 204-pin so.
It is for the models y460, thanks for posting the submodel. (xxxx format)
I'm looking to get more RAM for my HP Pavillion G7. I searched spare parts with the number of my product (A7A46UA) and noted that the replacement part would be
Module memory PC3-12800 4 GB, 1600 Mhz, 641369-001 (SHARED)
Can anyone confirm or deny this?
Here is a picture of my current RAM
It's actually a very specialized type of memory called DDR3L low voltage (1.35 volts).
It's the same thing:
Maybe you are looking for
I try to print an image that is on my pc. Whenever I try to print, photo paper comes out with nothing on the face bright and streaks of ink on the back or he is also dating a little of my printed image but the bad colors. I tried changing the setting
I have 6 computers Toshiba Tecra all bought to use the com port to communicate with data loggers. as provided by Toshiba, they work very well, as soon as they update of windows I get the message cannot open com 1, I have a scanner and nothing else is
After upgrading to TC126.96.36.199db3d2 SX20 had misdiagnosed: REVIEW: Valid unlock key Missing the key release for undefined. The system will not be able to make all the calls. Please Add a unlock key valid. But canned-> software update, I might add on
We install a new management station for our ids devices to replace our previous one that is a bit underpowered, but we cannot get it running to the point of being able to add our sensors. In the journal of the files IDS_Analyser, IDS_EvsServer, IDS_N
HelloWe know that financial balance sheet will have a calculated field, imaging of the last row will be the value of the sum for all above each column (see below the very approximate example), I doubt that ADF Table is the faces component appropriate