HP Pavilion m6 - 1068ca: missing drivers after windows reinstall (hard drive failure)

Similar Questions

• Pavilion G6-1d21dx: necessary drivers after Windows 10 clean install on g6 (g6-1d21dx Pavilion) Pavilion

  I tried the HP support site, but I don't see any drivers for any available OS for my model, the g6-1d21dx Pavilion.

  I did a clean install of Windows 10, but the Wi - Fi button does not work. Apparently, there's a pilot called HP wireless button that I need to install. When I do a Google search for it, there is a link to HP's download page, but the link seems to be dead.

  HP allows us to download drivers more? It's frustrating, because drivers must be simple and easy.

  Can someone please tell me where I can get this and all the other drivers that I might need after doing a clean install of Windows 10?

  Thank you.

  Well, I think I solved the problem. The first time I did a new install of Windows 10, didn't have an Ethernet cable connected to the computer. This leads to all sorts of problems, including a lack of access to the Internet and some devices are not installed correctly. I reformatted the SSD drive and cloned my old hard drive, but that resulted in a very slow performance, then I would get errors every other time I start the computer (inaccessible_boot_device, unexpected_store_exception and kernel_data_input_error). In addition, the hard drive that I cloned has been running the 64 bit version of Windows 10, and I wanted to try the 32-bit version, because I want to use some software of old who will not run on 64-bit Windows 10 (for example, the Spanish dictionary Oxford SuperLex 3-in-1, French and German).

  Last night, I did another installation of the 32-bit version, but with a network attached cable. This time, after installation and update of Windows, all my devices appear to be installed and working properly. This includes the Synaptics touchpad, the HP wireless button, the AMD Radeon graphics card and the Realtek card reader. I didn't need to install whatever it is myself, and the Device Manager does not display the unknown devices. In addition, installation completed MUCH more quickly with the connected network cable.

  Conclusion: If you clean - install Windows 10, I highly recommend that you do so with a network cable attached so that you will have access to the Internet when it is necessary during installation. With fixed cable, both my wired network and my Wi - Fi network have been detected during installation. Wireless network connected, even my Wi - Fi was not available during the installation.

• HP pavilion dv7-6111eo: various missing drivers after having reinstalled Win7 64 bit on hp pavilion dv7-6111eo

  Aloha

  First of all... I'm not grumpy, geek or nerd... And I want to say these words to those who are at best.

  In this case, you need to see me as a kid in kindergarten, being taken by the hand and what to do, down on every detail. Sad but true.

  Without me know why, I've known several DLL files missing, and often obtained on those error messages.

  A pain in the neck, so I re-installed Windows 7 64 bit, because I didn't want to mess with these missing dll.

  After this relocation, I couldn't have the internet connection to my router. Fortunately, I have a fixed 10 year and longer, where I eventually found the driver I needed, so it works now.

  But now it seems that there are several other drivers missing or not installed.

  I got a little info, another post, it must provide information and hope that will be enough. If this isn't the case, then please let me know additional information which may be required, and where I can find those on my PC, so I can provide these.

  Missing drivers:

  Network controller;

  Hardware ID: PCI VEN_8086 & DEV_008B & SUBSYS_53158086 & REV_34

  SM Bus controller.

  Hardware ID: PCI VEN_8086 & DEV_1C22 & SUBSYS_1659103C & REV_05

  (USB) Universal Serial Bus controller.

  Hardware ID: PCI\VEN_1033 & DEV_0194 & SUBSYS_1659103C & REV_04

  I have 4 USB ports, but only work, others do not react, and I need all four at the same time. In addition, I would like to have everything in order after I had to reinstall Win 7.

  Thank you in advance for any help I can get. Just have in mind that I need the things dug into the paper.

  Hello:

  You need these drivers...

  SM Bus controller.  Install this first and then restart.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102010-2&cc=us&DLC=en&LC=en&OS=4063&product=5154607&sw_lang=

  Network controller;

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99014-2&cc=us&DLC=en&LC=en&OS=4063&product=5154607&sw_lang=

  (USB) Universal Serial Bus controller.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100294-2&cc=us&DLC=en&LC=en&OS=4063&product=5154607&sw_lang=

  You will also need this bluetooth driver.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99500-2&cc=us&DLC=en&LC=en&OS=4063&product=5154607&sw_lang=

• Pavilion 23-f221ea: Setup error of Windows 8 hard drive refurbished

  Hello

  I posted a similar message last month, but it is a new issue.

  I start with a completely fresh SATA hard drive, purchased yesterday and the recovery that were sent to me by HP disks.  I think that I have can I have inadvertently damaged the last new hard drive he began to throw up a lot of mistakes 'disk fail.

  I was expecting, it's a straight forward case this time, but I was struck with the following message appears during the recovery process: "Windows could not restore your computer by using the factory imagebe"

  I followed the advice of this guy: http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-and-Recovery/Recovery-Manager-could-not-resto... and got an iso disc of Windows 8 (maybe 8.1).

  I started with the iso disk and followed the instructions on the screen until I was asked to choose the installation location. I chose the one and the only displayed 1 TB drive, but after nearly 30 minutes, the installer said "Windows is unable to install to the selected location. "Error: 0 x 80300001.

  I thought that this new disc may need partitioning and/or formatting, but I tried it via the command prompt only to be presented with another error - IO error. My hands are essentially firmly tied behind my back now.  I feel like I'm just opening a long line of Pandora's boxes at every turn!

  This time, I was convinced that, with a new batch of discs of HP Receovery official, it would be simple veil--what a mistake!

  Please can someone save me?

  Hello

  My thoughts are to delete all partitions, select new. Windows will create all the required partitions.

• Windows 7 hard drive failure

  Sign of pop up: the following hard disks are fault name ST3500413AS Volume C:\;D\ disk status

  I have no idea what that means or what I need to do.  I did a virus scan and a recovery.  The recovery was supposed to be unsuccessful; However, the sign ceased to appear during a day.  After recovering, I noticed a change when the computer starts again.  Instead of a screen with choice or seconds ticking up to automatically start/start again, the only option was a bunch of F1.  I have never seen it before.  The computer is slower than usual.

  Any suggestions?

  Your hard drive is about to fail. You must get the repaired unit.

• HP pavilion dv7 2050ev missing drivers on windows 8.1

  Hi all

  Recently, I upgraded my laptop from 5 to windows 8.1. After all windows etc updates, I realized that 5 devices were not recognized in Device Manager.

  By accessing the properties > details and choosing the hardware ID I found the drivers for two of my previously "unknown devices". Now, they work perfectly.

  If, for these other 3 devices, I am still unable to locate the required drivers.

  The identifiers are:

  (1) PCI\VEN_197B & DEV_2382 & SUBSYS_3624103C & REV_00

  (2) PCI\VEN_197B & DEV_2383 & SUBSYS_3624103C & REV_00

  (3) PCI\VEN_197B & DEV_2384 & SUBSYS_3624103C & REV_00

  Where can I find the drivers for those? By Googling, I assume that they are related with the SD reader.

  Any help please? Thanks in advance.

  Hello

  Try the driver from the link card reader.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63924.exe

  Kind regards

  DP - K

• How can I recover 12 PE after hard drive failure?

  February 25, 2014, I bought Adobe Premiere elements 12. The "my-products-services" page that it lists as well as all the other Adobe products that I bought for my Windows 7 64-bit desktop PC.

  I managed to reinstall CS6 Design and Web Premium after a catastrophic hard drive failure last month; However, am currently blocked in even trying to locate where on the Adobe Web site it might be permissible for me to re - install. For unknown reasons, my license is ss12, but my order is not listed under account - orders.html #myorderhistory. CS6 is shown on this page and was how I could restore CS6.

  Does anyone know what I should do next?

  Warmly yours.

  Kelly

  Find the link to download the current trial of v12 and then activate with your serial number

• Pavilion p6110t CTO Desktop: drivers for Windows Server 2008 and HARD drive problems

  Recently, I had the hard drive with my OS failure. After replacing the hard drive and reinstall windows server 2008, I seem to have encountered some problems with drivers.  After insalling Windows, I had 3 items in my device manager that not have installed correctly. I could get the driver for the LAN port to work, but I did not get the driver to "Standard VGA Graphics Adapter" and "SM Bus controller". After a little research, I believe that the graphics card is a Radeon HD4350. With this information, I still have been unable to toinstlal the correct drivers or the other of these elements. I tried several drivers listed on the support page of the drivers on the HP website, but all fo return them the same error of not finding the right operating system. The link to the driver, I used initially on my previous installation seems is no longer valid.

  Also, I can't access two additoinal hard disks (sata connected). They were used with the previous installation of windows without any problem. They appear in the Device Manager but do not show in my computer. A removable disk appears that I don't know what it is. Previously I used the software to mirror one of the disks on the other in order to avoid the loss of data if a disk fails. Is one of the above players with not be able to access the drives causing the problem or the software used before the problem?

  Any help on these questions is greatly appreciated.

  Ok.

  I can't help you with the readers then.  It is out of my area of knowledge.  If they are healthy and active in the disk management utility, then that's all that I know these should be reported.

  As for the graphics drivers...

  Download and install this free utility for files.

  http://www.7-zip.org/

  After installing 7 - zip, right-click on the graphic driver file and select 7 - zip from the list of options.

  Choose 7-zip to extract to: and leave it to unzip the file in a folder.  I have it extracted the file name of the file.

  Then just follow the rest of my instructions to install the driver.

  Of course that you you first go to where 7 - zip extract the folder and continue from there.

• HP pavilion dv6-3079tx: lost drivers after crushed hard drive and repair discs

  Hard drive crashed and replaced the HDD with ssd, lost all recovery disks then upgrade to 8.1 windows now I have not all drivers as finger print scanner and cd discs won't load. It's a hp pavilion dv6-3079tx

  Help, please

  Thank you

  @Leady05 ,

  Hello and welcome to the HP support forums.  Sorry to hear about hard drive failure.  Now for the bad news.  There is no driver support for windows 8.1 for your laptop.

  The laptop was produced with Windows 7 32-bit and 64-bit edition not windows 8 or 8.1, so it's drivers did not support to your system unless you reload Windows 7.

  HP Pavilion dv6-3079tx Entertainment Notebook PC Drivers

  This link provides all the drivers for your system.  If you reload windows 7 you will have no problems.

  Thanks for posting and have a great day.

• missing hal.dll message after removing the hard drive

  Original title:Ok, I had the same problem on my hard drive missing hal.dll. My question is what windows xp writes the cmos on my computer?

  OK, I had the same problem on my hard drive missing hal.dll. My question is what windows xp writes the cmos on my computer? The reason why I ask, is that I physically removed the hard drive from the computer and then start the computer I get the same message hal.dll lack. Since the hard drive is not installed, the only place where this message comes's cmos or bios of the computer.
  I know it seems odd, but I couldn't believe it when I saw it after removing the hard drive. It used to be with older computers and Windows 95 or 98 when you took a hard drive that wasn't working and installed with one that works from a different computer, you could swap out and boot the computer and make a few changes to some drivers if you.

  So what is windows xp write to the memory cmos on my computer?

  > Ok, I had the same problem on my hard drive missing hal.dll.

  The same as what? If you reference another thread, please include a link to it.

  > My question is what windows xp writes the cmos on my computer?

  It is not write anything for her at all.

  > Lack of the reason why I ask this is that I physically removed the hard drive from the computer and then start the computer I get the same message hal.dll.

  I think that you're wrong. I would like to say two things happening:

  1. you have more than one hard drive and the problematic drive was not removed, or

  2. you deleted something other than a hard drive.

  Do you have a CD in your CD drive by chance?

  What is the brand and model of your PC? Are you able to get into the BIOS?

• Tecra S11 - How to reinstall Windows 7 after upgrading the HARD drive?

  How to reinstall Windows 7 pro after an upgrade to 500 GB HARD drive? How to access password protected data after relocation? How can I get a professional installation of Windows 7 DVD?

  (I do not installed new HARD drive yet, but I intend)

  Hey Buddy,

  You have created the Toshiba Recovery disk? Perfect!
  After Exchange of HARD drive, you need this you to install Windows 7 disc. The Toshiba Recovery disk contains an image of the factory settings, which means that you will have the factory settings on the new HARD drive after the use of the disc. You must boot from it and follow the instructions on the screen.

  > How to access password protected data after relocation?
  It would be interesting to know what data you mean exactly.
  Before you reinstall Windows, you must back up all data on a disk for example external HARD.

• Activation of Windows Vista after replacing the hard drive

  I'm unable to activate windows after having my hard drive replaced. The portable station to my Windows Vista Home installed school, when my computer was originally Windows Vista Business. When I try to use Windows Activation, all options tells me that my product key is not valid for Windows Vista Home Edition. However, the steps to find a phone number to call for the activation require me to enter a product key, and then find the phone number from there. Because I can not clear the checkpoint, I can activate Windows or find a phone number to call. My computer has been purchased through my school, so I don't have a Windows Vista Business install disc, it automatically installs through the recovery disks. I could back up everything and then use the recovery disks, but I was wondering if there was another way to use the product key, I have, or to communicate with Windows. Any help would be greatly appreciated. Thank you!

  Hello

  the product key you have is for Vista Business, not the House

  without a product key for home which must be provided by your school or purchased by you (no longer sold) will not be activated

  as you bought the computer and operating through your school system, these are the people to talk about this

  and if they provided you with recovery disks when you bought originally, they are used to boot from to reinstall the original operating system

• How can I reinstall windows 7 after replacing the hard drive?

  How can I reinstall windows 7 after replacing the hard drive? do I have to call microsoft or I can retrieve it somehow to the old hard drive?

  Well, that certainly puts a different point of view on this subject.

  There are data recovery services that can recover data from disks that have suffered from various types of failures. However, they are quite expensive. Unless the data is particularly useful, it is generally not useful.

  If your Windows 7 is an OEM version, installed on the computer when you bought it, the manufacturer could have a recovery disk on sale. If it was a retail copy and you always have the appropriate product/serial number, you can get a DVD of their team of parts replacement.

  http://support.Microsoft.com/kb/326246

  Tom Ferguson

• Activate Windows 7 using the same product key after changing the hard drive.

  Original title: activate windows 7.

  Before that I put a new hard drive, should I the new product key or the same product key?

  Did you follow this advice?

  If it requires no Activation phone after replacing the hard drive, do not follow request to Auto, but brace yourself for a real person explain as to what has been done for purposes of re-setup

  "How to activate Windows 7 by phone '

  http://www.SevenForums.com/tutorials/18715-activate-Windows-7-phone.html

• The volume is low after replacing the hard drive (HP pavilion G4)

  Original title: Music Volume Low

  Hello

  Recently I was messed up with hard drive of my laptop (HP pavilion G4). I replaced with a new hard drive and it's working properly but my audio is low compared to that of the old days. I have tried many things available on websites, but I guess it is something different... How can I cope with this situation... Please help me...

  Thank you!!!

  Hello

  Try to run the next fixit and restart the computer and check.

  Problems with sound and audio or no sound
  http://support.Microsoft.com/GP/NO_SOUND

  Also check the properties of speaker

  

  Thank you.