Pavilion 23-f221ea: Setup error of Windows 8 hard drive refurbished

Similar Questions

• HP Pavilion m6 - 1068ca: missing drivers after windows reinstall (hard drive failure)

  Hi, I had to reinstall windows in a new hard drive after the failure of my hard drive by default. I couldn't find any drivers. Please help me find the drivers for my PC. The ID of material for the missing parts are the following:-

  Standard VGA graphics card

  PCI\VEN_1002 & DEV_6840 & SUBSYS_18A7103C & REV_00
  

  PCI\VEN_1002 & DEV_6840 & SUBSYS_18A7103C

  PCI\VEN_1002 & DEV_6840 & CC_030000

  PCI\VEN_1002 & DEV_6840 & CC_0300

  BCM20702A0

  USB\VID_0A5C & PID_21E3 & REV_0112
  

  USB\VID_0A5C & PID_21E3

  Ethernet controller

  PCI\VEN_10EC & DEV_8168 & SUBSYS_18A7103C & REV_0A
  

  PCI\VEN_10EC & DEV_8168 & SUBSYS_18A7103C

  PCI\VEN_10EC & DEV_8168 & CC_020000

  PCI\VEN_10EC & DEV_8168 & CC_0200

  PCI device

  PCI\VEN_10EC & DEV_5289 & SUBSYS_18A7103C & REV_01

  PCI\VEN_10EC & DEV_5289 & SUBSYS_18A7103C

  PCI\VEN_10EC & DEV_5289 & CC_FF0000

  PCI\VEN_10EC & DEV_5289 & CC_FF00

  SM Bus controller

  PCI\VEN_1022 & DEV_780B & SUBSYS_18A7103C & REV_14

  PCI\VEN_1022 & DEV_780B & SUBSYS_18A7103C

  PCI\VEN_1022 & DEV_780B & CC_0C0500

  PCI\VEN_1022 & DEV_780B & CC_0C05

  (USB) Universal Serial Bus controller

  PCI\VEN_1022 & DEV_7812 & SUBSYS_18A7103C & REV_03

  PCI\VEN_1022 & DEV_7812 & SUBSYS_18A7103C

  PCI\VEN_1022 & DEV_7812 & CC_0C0330

  PCI\VEN_1022 & DEV_7812 & CC_0C03

  Unknown device

  USB\VID_138A & PID_0018 & REV_0078

  USB\VID_138A & PID_0018

  Thank you.

  Hello:

  For the smbus and usb controllers, try the AMD chipset driver.  The first file listed.  Install and reboot.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  Standard VGA graphics card

  This package provides the AMD graphics driver high definition (HD) and Catalyst Control Center for models of laptop computers that are running an operating system supported. For laptops equipped with switchable graphics modes, this package contains the drivers for the two graphics (GPU). Switchable graphics allow users to switch between a graphical power mode (normally used under the power of the battery) and a mode of graphics performance. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp57269.exe

  BCM20702A0

  This package contains the Broadcom Bluetooth driver and software for models supported that are running a supported operating system. Broadcom Bluetooth 4.0 driver is required to enable the Broadcom Bluetooth 4.0 devices and is compatible with Broadcom Bluetooth 3.0 and earlier versions.

  File name: sp56715.exe

  Ethernet controller

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp56952.exe

  PCI device

  This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

  File name: sp56956.exe

  Unknown device

  This package contains the driver that allows the validity fingerprint sensor in the notebook models that are running a supported operating system. The fingerprint sensor analyzes fingerprints for use with biometric security applications.

  File name: sp56957.exe

• Setup did not find any hard drives installed in my computer

  HI -.

  I own a laptop Presario X1015US and recently bought a new hard drive for her (Western Digital Scorpio Blue PATA 160 GB) but when I insert the operating system CD it goes through the entire process until it gets to a page where it says:

  Family Windows XP Setup

  
  

  Setup did not find any hard drives installed in your computer.

  
  

  Make sure that the hard disks are turned on and properly connectd to your computer, and that any hardware configuration of the drives is correct. This may involve a diagnosis provided by the manufacturer or the installer running.

  
  

  Setup cannot continue.  To quit Setup, press F3.

  I'm not sure of what I am doing wrong and hope someone can help me.  For example -.

  -J' checked the Bios and I do not see where the drive sits - have I missed something?

  -The drive I bought compatible for this model - electronic Fry told me that it is.

  Thank you

  Charles

  If the bios does not see it, installing XP will ever either.

  Some older laptops have a problem with the largest hard disks (more), I return the drive and see if they have a 120 GB model.

  Can also be that you just got a bad.

• How can I move the Virtual Mode of Windows XP hard drive to another drive

  How can I move the Virtual Mode of Windows XP hard drive to another drive?

  TIA

  Hi Benyl,

  The vhd in programfiles basis cannot be moved or renamed, if done, xp mode stops at the start.

  To move the files under c, first to boot xp, instead of save mode the machine virtual., turn it off. (settings to prompt the user for action narrow close). Close the machine virtual., and then choose stop. This will remove the vsv file. Do not delete the .vsv file because it contains data if you have not registered in the virtual machine.

  Now, move it "C:\Users\CHRIS.domainname\AppData\Local\Microsoft\Windows virtual PC\Virtual Machines\Windows XP Mode.vhd" to a desired location.

  Parameters of xp mode open, go to the hard drive 1 setting and reposition the hard drive to the new location of the vhd. You should now be able to start the virtual machine.

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• Windows Setup could not configure Windows on hardware of this computer Installation error on the new hard drive

  Okay so if please bear with me and be patient.  I'm not tech savvy.  I know enough to be able to remove an old hard drive and put another one, but when there are errors, I don't know what to do.

  Here's the situation.

  I have a Dell Studio XPS with Windows 7 installed.  I started having these notifications that my hard drive could be a failure.  I tried everything that I could find to fix it without having to buy a new HARD drive without success.  The current system has a 1 TB Seagate hard drive.  I installed a memory additional bar thingie right after that I got the computer about 4 years ago.  (If someone tells me how to find the properties of real system, I post them if necessary).  Anyway, I bought a new WD 1 TB black disk hard to install before my old dies and loses all my photos and documents, etc...

  I took the old drive yesterday and installed the new hard drive.  I put back the case and turned on the machine.  I put in my Windows 7 installation disc.  He began installing Windows 7... It's completely past the initial screen where it says it to load it and the other... I had accepted the license agreement, but did not have to make a profile and do the work and the reader.  I hope all this makes sense.  Then it pops up this message "installing Windows could not set up Windows on hardware on this computer."  I couldn't figure out what to do from there.  I got the new drive and put the old one back to and here I am. I tried to find solutions to this problem, but I either don't can't make heads or tails out of the responses on the internet or the solution is not exactly my problem.

  Please help if you can!  And if you have any suggestions, please dumb them down so I can understand what to do.  I CAN do if loaded, you just have to not talk too irritable.  Laughing out loud

  Thank you in advance!

  Maybe not...

  The Windows installation is not happy about something, and since it gets at least started which is a good thing, but your installation problem can not really be with Windows - perhaps something about Dell hardware or your 1 TB HARD drive.

  I looked at your system and found this article that you can read to see if it sounds like your original question:

  Windows Setup could not configure Windows on hardware on this computer.

  http://www.Dell.com/support/article/us/en/19/SLN293812/en

  Since Dell has written an article for help on this subject, it means they've met enough times to take the time to compose the article and put it on their WWW site (but, they say, it is a possible resolution).

  Could you take the issue in the Dell online community where experts hang out (especially your amber light).

  Another good place for support is www.bleepingcomputer.com where there is a similar topic as your question (except Vista) on a Dell and a new disk of 1 TB (also a Seagate) and Dell ideas did not work, but someone else has found a way to fix it:

  http://www.bleepingcomputer.com/forums/t/453378/installation-fails-to-complete-on-new-HDD/

  The bleepingcomputer for your error message search reveals other areas and people who have got things to work in different ways, then it is perhaps another place to look for ideas.

  If the installation still fails it would not hurt to do the BIOS setting and see if things are getting longer, and since you are going to write the current settings before proceeding with the adjustment you can always cancel the adjustment if things get worse.

• Pavilion P6-2469eo: Reinstalling windows after HARD drive crash

  Hi, I just bought a defective HP Pavilion P6 known.   After receiving and checking, it appears that the hard drive is faulty.

  The machine does not start, I have activated POST messages and now a screen message saying that 'no boot disk was detected, or the drive failed.    The DPS self test fails with code 7.

  I disabled the secure boot and can boot from a CD of Linux, so I know that, basically, the computer is still alive

  My question is, once I have comes from replacing the hard drive, I can get a copy of replacement windows to HP or do I buy one out of the copy of the Windows Tablet (or install Linux)?

  I was told that the machine is two years old and just out of warranty.

  Thank you!

  If out of warranty, you will most likely need to buy a set of HP or a partner of HP recovery disk. The good thing is that it's a reasonable price.

  http://h10025.www1.HP.com/ewfrf/wc/CLC?tmp_showAll=false&'destPage = document & cc = us & dlc = en & docname = bph07143 & lc = en & tmp_clcDestination = doclink

• I get this error: C:\windows\system32\spool\DRIVER\x64\3\UDIDRVUI. DLL

  This error occurs when I try to print or work on a document: C:\windows\system32\spool\DRIVER\x64\3\UDIDRVUI. DL

  Is there a way I can fix this error?

  Hello

  1. What is the brand and model of your printer?
  2. this happens with all the documents you print?

  See the following troubleshooting steps.

  
  

  Run the printer troubleshooter.

  Refer to this link:

  http://Windows.Microsoft.com/en-in/Windows7/open-the-printer-Troubleshooter

  Also check out this link:

  Why can I not print?

  http://Windows.Microsoft.com/en-in/Windows7/why-cant-I-print

  I hope this helps!

• Windows 7 - HP Pavilion HPE h8 - 1360t I added a second hard drive

  I installed a seagate (seagate 2 TB Barracuda SATA) second drive on my desktop computer.  When I got to the top I could go to the control panel and not see under the heading records.  Seagate said to go to the BIOS and choose 'Auto Connect your new drive', but there is no other choice to Auto Connect.  If anyone can tell me who is the right choice on the BIOS screen to find and identify my new second hard drive?

  Hello

  In the disk management window, right-click on your new HARD drive and select Format to start the wizard.  Windows 7 will affect a Volume label so if your happy with it, just leave the default.  File system is NTFS.  Allocation unit size must be left by default.  Select the option to perform a quick format if it is not already done.  Leave all the other default settings, and then click Ok, and then Ok to start the process.

  Once this done, your new HARD disk should now appear when you look under the computer.

  Kind regards

  DP - K

• Pavilion TouchSmart 23-f364: Hp Pavilion 23-f364 BIOS "finds it difficult to" hard drive Detection

  I have a HP Pavilion TouchSmart f364 23 for Christmas in 2013 and in 2014, the hard drive has begun to act. I would like to turn on the computer and it does not detect the drive or does not see the files it contains. The CD drive is detected and works all the time. I've updated the BIOS, I replaced the drive with a brand new, and since the old is in an external hard drive enclosure works like new money. The computer will always have problems in windows being blockages, then crashes. I looked for the reasons of the accident and they were due to mistakes of disk access. After reboot, the drive is not detected. In Ubuntu, the drive is detected and accessible (but I can't get the windows partition to mount, with the error "Windows is put in hibernation," even with the quick start off and a full stop). The point is that Ubuntu can see and access the drive to boot from the drive itself (if possible) and a live USB. Ubuntu will crash as or experience access errors, but when restart the BIOS sees not the disc. The disc turn and accesses a little bit, but nothing happens. In addition to the exchange of discs, I also swapped sata ports on the mobo with no luck, and power connectors are different, so no swap it. I want to know now if replace HARD drive cable may solve the problem or if I need to replace the mobo or this computer is just cursed. (Father: when I asked for a desktop I do not mean all in one)

  TL; DR: The Bios does not detect hard drive or detect but once at random, at random, windows crashes because of this, Ubuntu works perfectly well and has access to disk drive and boot Live, bios does not always detect drive. Tried upgrading BIOS, replacement drive and swapping mobo ports sata, no luck, CD player works great every time. You want to know if buying a new HARD drive cable works or if it is the mobo which is bad.

  Also note: when I updated the BIOS it says it resets the CMOS and I repeatedly loaded by default in the BIOS settings. I have found but not yet tried the CMOS clear jumper.

  Hi @Lesking72,

  Welcome to the HP Forums! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  Thank you for posting. I read your post and I understand that the old hard drive can operate as an external drive, but the new drive and the old disk cannot be detected in the BIOS. You can run hardware diagnostics to test the motherboard and hard drive. If the motherboard and the hard disc as well spent, you can consider if it is a cable problem.

  Here is a document, which you can view:

  Desktop PC HP - detection of hardware failures (Windows, 10, 8)

  For Ubuntu system, please refer to the support of Ubuntu.

  Let me know the results of your troubleshooting.

  To say thank you, click on the "thumbs-up".

  Kind regards

• Error 1 full (305) hard drive with dv6-6119tx - is it worth to replace the HARD drive?

  Hello!

  I bought the mobile entertainment HP Pavilion dv6-6119tx (QB365PA) in July 2011. The specifications are - processor: Intel Core i5 - 2410M, integrated RAM DDR 3 4 GB, HDD: 640 GB (Toshiba) operating system: Windows 7 Home Premium x 64

  Since I bought this machine it has been giving me problems in time. First webcam died within the first 2 months, then the DVD recorder failed then it was the keyboard and finger print sensor. There were several problems with the installation of microsoft update. Six months ago, I replaced the 6-cell battery. I bought a costly maintenance contract for the second year, given the number of aging I met within the first year of use. Apart from the battery which was of course not covered under the contract, I had no other problems in the 2nd year. And just as this contract expired in August of this year I started facing problems, I got BSOD on two or three occasions. After each incident system booted normally and everything was fine except the Device Manager indicates problems with infrared devices consumers. The problem seems to have exploded on its own. Then since the past two months, my computer started freezing during startup and for initial 5-10 minutes. After startup. In this duration, I checked several times HARD drive health using the utility BIOS InsydeH2O repeatedly. The time required for the diagnosis seems to be gradually increasing with each analysis later but he still passed diagnostics. But today, when he sent 'Hard disk 1 (305) full' message and yet I am able to boot but with freezy start-up. Today, the system froze in the middle of something twice and I had to stop hard. When I ran Avast! It froze at 99% on detailed analysis. He struck the syswow64 folder file and showed an infected file.  I have run windows error checking-HD and it showed no errors.

  My questions are-

  1. what seems to be the problem? What is a HDD failure or infection?

  2. is it useful to replace the HARD disk if the problems are the result of HARD drive problems?

  3. I argued my sytem on external HARD drive, I can install Windows 7 on new HD, if get a?

  4 system backup of files is only 274 MB in size, is this good?

  5. If I purchase the new hard drive has the same specifications and manufacturer as the current one or can I update? If I can update what are recommended replacements?

  Hi KlebersonofGun:

  Thanks yo for your answer.  I send you a link to the Guide "Maintenance and Service" for your computer, click here. Page 62 has a section on the replacement hard drive

  You can use any brand of hard drive, as long as it fits the plug.

  I hope this helps.

• Pavilion a6500f: can I add a second SATA hard drive to my HP Pavilion a6500f?

  I have a HP Pavilion a6500f running Windows 7 Home Premium.  I would like to add a second hard drive to 500 GB 7200 RPM to it as a slave drive.  Can I do this?  And if I can how do I know what size must have the hard drive?

  That your system is 8 years old, I suggest you these:

  (1) clone the old drive to a new drive, either 500 GB or 1 TB.  Use it as your new drive system.  Modern Sata 600 drives are 6 Gbps with 64 MB of cache memory. It will have better performance than older Sata 300 players with 32 MB cache / 3 GB/s.

  (2) your old-school, like the reader of the term 'slave' was a reference to the IDE/EIDE, cabling system.

  (3) all you need is a standard WD or Seagate 7200 RPM disk 3,5 '' hard. Both offer a free disk assistant program to facilitate the process of cloning.

• Error retrieving Tecra A6 (hard drive not found. Error: F3E1000001)

  Hello
  I want to recovery my Tecra A6, but when I insert the first (of three) DVD and restart my system to get to the recovery

  Menu (when booting from the recovery DVD) just rebooted my laptop and every time I try this (very simple procedure) this

  happen again.
  That's why I tried to get it back to Win XP > Toshiba Recovery Wizard... in the first DVD in the 'BIN' folder there isn't

  a "RECOVERY.bat" batch file when I run this file will open a CMD window and checks are willing (and then the

  following text is displayed in the CMD window :)
  "
  Verification of DMI
  Verification of RAID
  Failed to initialize the raid class.
  Check the HARD disk
  End of the error
  "
  and a new window opens with the following text:
  "
  
  an error has occurred.
  Error: F3E1000001
  Hard drive not found.
  Please press [OK] to turn the computer off.
  "
  If I press OK the any immediately goes down (without shut down windows) and I have to restart.
  Also my laptop works properly my recovery DVDs sounds great, I want to just recover my system because of the speed more

  in Win XP.
  Maybe there is a new firmware for my HARD drive or an update of the BIOS so that the laptop could detect my HDD.
  In Device Manager, my HARD drive is: HTS541010G9SA00

  Wait a minute: you try to run recovery as OS installation?

  The recovery procedure must be on path:
  Turn on the laptop and press the F12 key
  When the bootable devices appear put the first media for recovery in the optical disc drive
  Choose CD/DVD media from the list and press ENTER
  Follow the menu on the screen.

• HP Pavilion dv6-1260se artist edition Entertainment Notebook PC Hard Drive Question

  Hello, I hope someone here can answer a question for me. I have a 4 year old HP Pavilion dv6-1260se artist edition Entertainment Notebook PC and the hard drive died on me. I have been trading for the replacement of the hard disk and found a 1 TB disk toshiba sata hard I like, the original drive was a 500 GB. I'm a graphic designer in order to available disk space is important in a replacement player. The page of product for my laptop specification does not say if the original hard drive was a sata drive. Did anyone here know if a 1 TB sata drive will work in my laptop? Any help is greatly appreciated!

  Your hard drive is SATA. Service and maintenance Guide lists the largest available in 500 GB hard drive. This isn't a definitive answer that your laptop can not use a 1 TB retail hard drive. However, if you use recovery disks Vista to install Windows on it, the more great concern will use a hard drive Advanced Format (AF). Most recent hard drives are AF and Vista will probably not be able to install.

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us & dlc = in & lc = in & product = 3979400 & task = &

• Satellite A100 PSAA2E Setup hangs after connecting new HARD drive

  Hello

  I have a problem with TOSHIBA Satellite A100 PSAA2E (3 year old laptop)
  I bought the new SAMSUNG SPINPOINT 250 GB SATA (model HM250JI) hard drive.

  After connection, the computer hangs on the first screen. I can't access the BIOS Setup (press F2)
  I can't boot the CD of form (I can't select same drive to start by pressing F12)

  It just hangs.

  When the HARD drive is unplugged I can access the configuration of the BIOS or boot from CD. When the original hard drive (FUJITSU 40BG) is connected, everything is ok.

  I updated the BIOS to version 1.5 to the a more recent 2.6, but it did not help.

  HARD drive runs under windows xp, when connected by USB port. It is formatted with NTFS: a primary partition(15GB), a stretch with two logical partitions (20BG, GB 215).

  You have no idea where could be the problem?
  Should I format hard drive in a different way?

  BR,

  hosss

  Hello

  Check if your new HARD drive has been fitted with a small jumper that controls the master/slave/c-salt settings.

  A friend of mine bought a new HARD drive and BIOS didn't recognize because the rider has been set to the wrong position.

  Good bye

• Cannot install Windows 7 HARD drive problems

  Hi all!

  I have lenovo ThinkPad T540p. Intel Core I7, 8 GB RAM and 500 GB HARD drive. I think my HARD drive is Toshiba. It had Windows 7 on it, but it starts no more on this subject. When I start Windows is it shows 5 seconds black screen, and then it displays the Boot Menu. Well, I tried to reinstall Windows, but when I have to choose on which disk to install Windows, I get an error: "no hard drive found." And the list with readers is empty, so I can't reinstall Windows. I've updated the BIOS, but it did not help. Finally, I formatted my HARD drive and created two partitions on it. It worked, but not for long. I installed Windows 7. Everything was going well until I restarted my computer. And then I got the same problem: 'Cannot start from the HARD disk' and displays the Start Menu. Then I booted Windows installation and I got the same error: "no hard drive found."

  I don't understand what is happening with my HARD drive and that is to destroy his scores.

  And I don't think that my HARD drive is broken.

  I don't really know what to do!
  Please, help me!

  Thanks a lot!

  Here is the solution:

  My HARD drive was broken. I bought a new MX100 of Crucial SSd and everything is fine.