HP Pavilion Notebook 15-p100nx: upgrade - HP Pavilion Notebook 15-p100nx ram

Similar Questions

• Pavilion dv3507ea 64 bits - RAM (and Win 7) upgrade

  Hello, this is a long time since I've posted here... on a backlit keyboard on my dv3507.  The topic is still underway nearly two years later!

  I move to win7 (maybe I should of taken advantage of upgrade offers on this site some time ago).  As well as the upgrade to Win7 I increase the ram.  Currently I have 2048 and mounted a 1024 module - i.e. the two slots in the populous 3507.  I intend to replace the 1024 2048 module to give me 4 GB.  I know the improvement will be negligible, but I'm always happy to throw money at it...

  In the manual of the computer it says it is 6400 667 ddr2 sodimm.  I ran various "analyzers" including crucial and he says that it is 6400 800.  I checked the bios and the HP system tools to see if it tells me that the clock speed of the memory installed but it does not show anywhere.  I don't know whether to believe memory manual crucial analysor tool... and at least 2 other tools who say it is 6400-800.  Only the manual says that it is 6400-667.

  I'm pretty sure that 667 and 800 can be appointed, but with the 800 synchronizing to the slower speed (667).

  Has anyone here upgraded their ram?  If so did you use mixed speeds?  All the problems?  And all the problems on the upgrade of the dv3507ea for Win 7?

  TKS in advance.

  Phil

  Your laptop can be upgraded to windows 7 64 bit without any problems. You can download the drivers for your hardware on here.

  To clear the confusion, in theory, when different speed RAM modules are used, all of the RAM should clock at the speed of the slowest module (usually you can see what kind of limitation only on Intel systems).

  Your laptop supports 667 and 800 Mhz clock speed, and it wouldn't cause a problem if you use mixed speed memory modules but I suggest you use all the same memory sticks with clock even to get optimal performance speeds.

• HP Pavilion dv7t-7000 CTO RAM DDR3 or DDR3L

  HP Pavilion dv7t-7000 CTO RAM DDR3 or DDR3L?

  The manual is not precisely which of the two.
  Any idea?

  David_kata wrote:

  HP Pavilion dv7t-7000 CTO RAM DDR3 or DDR3L?

  The manual is not precisely which of the two.
  Any idea?

  Hello

  Both modules can be used. DDR3L means that memory using low voltage. Means that the modules produce less heat and last longer than DDR3 pure ones. I always use 1600 MHz CL9 DDR3 Corsair pure modules.

• can I upgrade my 110-1111 Compaq mini ram 2 GB?

  Hi, can I upgrade my compaq mini 110-1111 RAM 2 GB? I tried to replace once but in only 2 days that it executed a memory dump or BSOD, thanks in advance for the answer...

  Hello

  Yes you can - check and reinstall (not reset) RAM once it comes to the form of RAM:

  http://www.crucial.com/upgrade/HP+-+Compaq-memory/Compaq+mini/Compaq+mini+110-upgrades.html

  Kind regards.

  PS I paid only $28 for mini of my daughter.

• I want to upgrade to windows 8 but the RAM is 512 MB.

  I use a desktop computer. I want to upgrade to windows 8 but the RAM is 512 MB. My question is: can I switch to windows 8 with 512 MB of ram even when

  Friday, January 25, 2013 10:38:20 + 0000, lalindaravishan wrote:

  I use a desktop computer. I want to upgrade to windows 8 but the RAM is 512 MB. My question is: can I switch to windows 8 with 512 MB of ram even when

  See Richard Harper response and also read here
  http://windows.microsoft.com/en-US/windows-8/system-requirements,
  that tells you that you need at least 1 GB.

  And even 1 GB is not enough for a decent performance with almost any
  You can run applications. It's been a long time since 512MB has been
  sufficient for correct performance with any version of Windows.

• I got the drive CS6 for PC and then upgraded to a computer with more RAM, a Mac. How can I not lose all my programs?

  I had a PC with 4 RAM and my Suite CS6 kept crashing the computer. I have now upgraded to a Mac with 16 RAM, but the programs I bought are all for PC. What I can do to not lose all the programs I already paid for?

  swap https://helpx.adobe.com/x-productkb/policy-pricing/exchange-product-language-os.html or use Parallels: Virtualization Mac & Windows, Desktop Access, Management Solutions of

• HP Pavilion Notebook - 17-g053: HP Pavilion Notebook - 17-g053us ram upgrade

  I have a HP Pavilion laptop - 17-g053us (ENERGY STAR)

  It came with ram 8 GB (DDR3L SDRAM (1DIMM)) and I want to know if I can upgrade the RAM.  Also, if it can be upgraded, I can do it without voiding the warranty.

  Official specs say 1 8 GB DIMMS:

  http://support.HP.com/us-en/document/c04686714

  Part of HP for 8 GB module number.

  8 GB (PC3L, 12800, 1600 MHz)

• Pavilion g6-1132sa: my RAM can be upgraded to 8 GB HP Pavilion g6-1132sa Notebook PC

  I want to improve my 8 GB system ram
  comes with 4 GB of ram, but says that I can use only
  3.6 GB. I would like to know if my system is
  compatible, HP Pavilion g6-1132sa Notebook
  PC. Thank you

  Your service Manual:

  Manual

  He says: Yes you can install up to 8 GB, assuming that you have a 64-bit version of Windows. See p. 52 of the manual for instructions.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP pavilion 15-ak031tx game: ram upgrade

  Hi, I have a pavilion hp 15-ak031tx Windows Home 64-bit game 10. Intel processor core i5-6300HQ with NVIDIA Geforce GTX 950 M, 4 GB, 1 TB hard drive and 4 GB of ddr3 ram... I want to upgrade the ram to 8 GB. I still new on the ram upgrade.

  Hello

  Your device supports

  Supports up to 16 GB of system RAM DDR3L-1600 Dual Channel.

  http://h10032.www1.HP.com/CTG/manual/c04823146

  Link above is for manuals... General information about RAM page 2

  How to replace page 47

• Pavilion P6630: Failure of RAM upgrade

  I have a HP Pavilion P6630 with 2 x 2 GB DDR3 - 667 MhZ sticks inside (factory standard).

  According to information I found on the motherboard in combination with my Windows 7 Home Premium 64 - Bit, support maximum memory is 16 GB.

  So, I advanced and bought 2 x DDR 4 GB 1333 MhZ (PC3-10600 Dimm). Once again, according to the information I have found on the HP site when I looked up my model.

  When I took the original poles of the blue orbits (M4 + M2) and replaced by my new, the computer is stuck on the "intro" screen (where it says press F10 to enter the BIOS). He didn't get into the BIOS, it of just sitting there and did nothing.

  From there, I tried all possible options:
  Put the old back and added the new in the empty slots, leading to the computer going on market and stop and and and...

  New sticks seem to work because the system recognizes in M3, M4 and M1, M2 of installation. Here is the single channel configurations, however. And once again, when in these slots, the system go away and start and stop.

  As already said: I tried all possible combinations of old and new and locations, but there is really only one that works: my two older in their original blue locations.

  I did a reset of the CMOS and I took out the battery for half an hour. No results.

  And Yes: I push the sticks in lampholders enough far, etc.

  I'm desperate! Hope someone can help me.

  The trick to a successful upgrade memory is:

  Memory modules is not not the sellers have to sell with the HP published specifications of the motherboard requirements. It is a strategy to upgrade memory that quite often results in disappointment and a situation of no bootable.

  Purchase of memory modules that are guaranteed compatible memory manufacturers. If possible, stick with the manufacturers of memory known as Crucial, G.Skill, Kingston, Hynix, just to name a few.

  Add memory to the memory modules already installed unless you are absolutely identical to the original modules in all respects.

  Memory manufacturers use configuration utilities on their corporate Web sites.

• Laptop HP Pavilion 14 n201-tx: RAM upgrade for laptop HP Pavilion 14 n201-tx

  I have a laptop HP Pavilion 14 n201-TX with 4 GB 1Rx8 RAM of PC3L - 12800S. The other location is empty. I want to upgrade the RAM to 8 GB or more.  I have 2 questions:

  1. Can I buy a 8 GB of RAM and pair it with the existing 4 GB RAM?

  2 should. what RAM I buy? How to choose the RAM compatible, right?

  Help, please. Ty.

  Hello

  Download the manual from the link below and check page # 3 of Chapter 1 for RAM upgrade

  http://h10032.www1.HP.com/CTG/manual/c04439608

• HP Pavilion: How to install RAM in a HP Pavilion Notebook - 15-p199sa (ENERGY STAR)

  Hi all need help to install my ram because there was no door RAM on the

  HP Pavilion Notebook - 15-p199sa (ENERGY STAR) one know how to install it? Thank you :-)

  Yes I know not how, but you won't like it. Here is the Service Manual:

  Manual

  Page 104. It requres removal of the top cover and also the removal of the motherboard. Not for the occasional laptop computer technician, I'm sorry to say. Post back if you want more help.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP Pavilion 15-n211dx. RAM upgrade

  What is the max RAM, you can update the HP Pavilion n211dx. I just bought bewst buy 2 weeks ago. The vehicle currently has 4 GB SDRAM DDDR3. I can't find anywhere on the HP site says something on the upgrade of the ram. There can be no memory locations. This isn't the touchscreen model. 8.1 Windows 64-BIT

  Someone please help!

  Hello

  The maximum Ram is 16 GB (2 x 8 GB Modules) - an example of an appropriate upgrade can be seen on the following link.

  http://www.crucial.com/store/listparts.aspx?model=Pavilion%2015-n211dx

  Kind regards

  DP - K

• Pavilion p6680t CTO Office: Pavilion p6680t CTO Desktop Ram Upgrade

  Desktop Pavilion p6680t CTO has now 4x2gb modules of RAM. I tried to replace both of them with 2 4 gb chips. Would not work. I tried all possible combinations of chips and will not work with the added 4gbs. Here's the new:

  Kingston Value RAM 4 GB 1333 MHz PC3-10600 DDR3 Non ECC CL9 DIMM SR x 8 Fund memory (KVR13N9S8/4)

  What I am doing wrong? These should be the correct modules, right?

  Thanks for any help you can give.

  Hello

  N ° maybe it's something to do with the buffer. Yesterday, a member has tried 3 brands of RAM, but in the end, they had to buy the same brand with the existing RAM on access to his computer. Please try this way or

  http://www.archmemory.com/memory.cfm/HP-RAM-Pavilion-desktops-HP-Pavilion-p6680t-133075

  Kind regards.

• Pavilion g6 2136 tx: ram upgrade

  Hello

  My laptop has 4GB Hynix 1333 MHz.

  What are my options to increase the ram and could you recommend me.

  2 accessible/upgradable SODIMM customer locations: ● DDR3-1333 MHz Dual Channel Support (downgrade from DDR3 - 1600 MHz DDR3 - 1333 MHz) supports the following configurations up to 8 GB: ● 8192 MB total memory (4096 × 2)

  4 GB PC3 12800 1600 MHz shared 641369-001

  http://www.Amazon.com/crucial-PC3-12800-204-pin-notebook-CT51264BF160B/DP/B005LDLV6S/ref=sr_1_1?ie=UTF8&QID=1455626308&SR=8-1&keywords=641369-001

  It must match the module that is already in it:

  http://www.Amazon.com/HP-VH641AT-4-GB-DDR3-PC3-10600/DP/B0030L3B8E/ref=sr_1_4?ie=UTF8&QID=1455626308&SR=8-4&keywords=641369-001

  It can take memory DDR3-1600 but will downclock at 1333 speed, so you can install either DDR3-1600 and DDR3-1333 and I would install 2 of the same no matter what you choose to install. Since you have a 4 GB module, you can simply add another.

  P. 39 of the manual here illustrates the upgrade memory:

  Manual

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.